 b9da057105
			
		
	
	
	b9da057105
	
	
	
		
			
			* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6: (31 commits) driver core: Display error codes when class suspend fails Driver core: Add section count to memory_block struct Driver core: Add mutex for adding/removing memory blocks Driver core: Move find_memory_block routine hpilo: Despecificate driver from iLO generation driver core: Convert link_mem_sections to use find_memory_block_hinted. driver core: Introduce find_memory_block_hinted which utilizes kset_find_obj_hinted. kobject: Introduce kset_find_obj_hinted. driver core: fix build for CONFIG_BLOCK not enabled driver-core: base: change to new flag variable sysfs: only access bin file vm_ops with the active lock sysfs: Fail bin file mmap if vma close is implemented. FW_LOADER: fix kconfig dependency warning on HOTPLUG uio: Statically allocate uio_class and use class .dev_attrs. uio: Support 2^MINOR_BITS minors uio: Cleanup irq handling. uio: Don't clear driver data uio: Fix lack of locking in init_uio_class SYSFS: Allow boot time switching between deprecated and modern sysfs layout driver core: remove CONFIG_SYSFS_DEPRECATED_V2 but keep it for block devices ...
		
			
				
	
	
		
			889 lines
		
	
	
	
		
			21 KiB
			
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			889 lines
		
	
	
	
		
			21 KiB
			
		
	
	
	
		
			C
		
	
	
	
	
	
| /*
 | |
|  * Driver for the HP iLO management processor.
 | |
|  *
 | |
|  * Copyright (C) 2008 Hewlett-Packard Development Company, L.P.
 | |
|  *	David Altobelli <david.altobelli@hp.com>
 | |
|  *
 | |
|  * This program is free software; you can redistribute it and/or modify
 | |
|  * it under the terms of the GNU General Public License version 2 as
 | |
|  * published by the Free Software Foundation.
 | |
|  */
 | |
| #include <linux/kernel.h>
 | |
| #include <linux/types.h>
 | |
| #include <linux/module.h>
 | |
| #include <linux/fs.h>
 | |
| #include <linux/pci.h>
 | |
| #include <linux/interrupt.h>
 | |
| #include <linux/ioport.h>
 | |
| #include <linux/device.h>
 | |
| #include <linux/file.h>
 | |
| #include <linux/cdev.h>
 | |
| #include <linux/sched.h>
 | |
| #include <linux/spinlock.h>
 | |
| #include <linux/delay.h>
 | |
| #include <linux/uaccess.h>
 | |
| #include <linux/io.h>
 | |
| #include <linux/wait.h>
 | |
| #include <linux/poll.h>
 | |
| #include <linux/slab.h>
 | |
| #include "hpilo.h"
 | |
| 
 | |
| static struct class *ilo_class;
 | |
| static unsigned int ilo_major;
 | |
| static char ilo_hwdev[MAX_ILO_DEV];
 | |
| 
 | |
| static inline int get_entry_id(int entry)
 | |
| {
 | |
| 	return (entry & ENTRY_MASK_DESCRIPTOR) >> ENTRY_BITPOS_DESCRIPTOR;
 | |
| }
 | |
| 
 | |
| static inline int get_entry_len(int entry)
 | |
| {
 | |
| 	return ((entry & ENTRY_MASK_QWORDS) >> ENTRY_BITPOS_QWORDS) << 3;
 | |
| }
 | |
| 
 | |
| static inline int mk_entry(int id, int len)
 | |
| {
 | |
| 	int qlen = len & 7 ? (len >> 3) + 1 : len >> 3;
 | |
| 	return id << ENTRY_BITPOS_DESCRIPTOR | qlen << ENTRY_BITPOS_QWORDS;
 | |
| }
 | |
| 
 | |
| static inline int desc_mem_sz(int nr_entry)
 | |
| {
 | |
| 	return nr_entry << L2_QENTRY_SZ;
 | |
| }
 | |
| 
 | |
| /*
 | |
|  * FIFO queues, shared with hardware.
 | |
|  *
 | |
|  * If a queue has empty slots, an entry is added to the queue tail,
 | |
|  * and that entry is marked as occupied.
 | |
|  * Entries can be dequeued from the head of the list, when the device
 | |
|  * has marked the entry as consumed.
 | |
|  *
 | |
|  * Returns true on successful queue/dequeue, false on failure.
 | |
|  */
 | |
| static int fifo_enqueue(struct ilo_hwinfo *hw, char *fifobar, int entry)
 | |
| {
 | |
| 	struct fifo *fifo_q = FIFOBARTOHANDLE(fifobar);
 | |
| 	unsigned long flags;
 | |
| 	int ret = 0;
 | |
| 
 | |
| 	spin_lock_irqsave(&hw->fifo_lock, flags);
 | |
| 	if (!(fifo_q->fifobar[(fifo_q->tail + 1) & fifo_q->imask]
 | |
| 	      & ENTRY_MASK_O)) {
 | |
| 		fifo_q->fifobar[fifo_q->tail & fifo_q->imask] |=
 | |
| 				(entry & ENTRY_MASK_NOSTATE) | fifo_q->merge;
 | |
| 		fifo_q->tail += 1;
 | |
| 		ret = 1;
 | |
| 	}
 | |
| 	spin_unlock_irqrestore(&hw->fifo_lock, flags);
 | |
| 
 | |
| 	return ret;
 | |
| }
 | |
| 
 | |
| static int fifo_dequeue(struct ilo_hwinfo *hw, char *fifobar, int *entry)
 | |
| {
 | |
| 	struct fifo *fifo_q = FIFOBARTOHANDLE(fifobar);
 | |
| 	unsigned long flags;
 | |
| 	int ret = 0;
 | |
| 	u64 c;
 | |
| 
 | |
| 	spin_lock_irqsave(&hw->fifo_lock, flags);
 | |
| 	c = fifo_q->fifobar[fifo_q->head & fifo_q->imask];
 | |
| 	if (c & ENTRY_MASK_C) {
 | |
| 		if (entry)
 | |
| 			*entry = c & ENTRY_MASK_NOSTATE;
 | |
| 
 | |
| 		fifo_q->fifobar[fifo_q->head & fifo_q->imask] =
 | |
| 							(c | ENTRY_MASK) + 1;
 | |
| 		fifo_q->head += 1;
 | |
| 		ret = 1;
 | |
| 	}
 | |
| 	spin_unlock_irqrestore(&hw->fifo_lock, flags);
 | |
| 
 | |
| 	return ret;
 | |
| }
 | |
| 
 | |
| static int fifo_check_recv(struct ilo_hwinfo *hw, char *fifobar)
 | |
| {
 | |
| 	struct fifo *fifo_q = FIFOBARTOHANDLE(fifobar);
 | |
| 	unsigned long flags;
 | |
| 	int ret = 0;
 | |
| 	u64 c;
 | |
| 
 | |
| 	spin_lock_irqsave(&hw->fifo_lock, flags);
 | |
| 	c = fifo_q->fifobar[fifo_q->head & fifo_q->imask];
 | |
| 	if (c & ENTRY_MASK_C)
 | |
| 		ret = 1;
 | |
| 	spin_unlock_irqrestore(&hw->fifo_lock, flags);
 | |
| 
 | |
| 	return ret;
 | |
| }
 | |
| 
 | |
| static int ilo_pkt_enqueue(struct ilo_hwinfo *hw, struct ccb *ccb,
 | |
| 			   int dir, int id, int len)
 | |
| {
 | |
| 	char *fifobar;
 | |
| 	int entry;
 | |
| 
 | |
| 	if (dir == SENDQ)
 | |
| 		fifobar = ccb->ccb_u1.send_fifobar;
 | |
| 	else
 | |
| 		fifobar = ccb->ccb_u3.recv_fifobar;
 | |
| 
 | |
| 	entry = mk_entry(id, len);
 | |
| 	return fifo_enqueue(hw, fifobar, entry);
 | |
| }
 | |
| 
 | |
| static int ilo_pkt_dequeue(struct ilo_hwinfo *hw, struct ccb *ccb,
 | |
| 			   int dir, int *id, int *len, void **pkt)
 | |
| {
 | |
| 	char *fifobar, *desc;
 | |
| 	int entry = 0, pkt_id = 0;
 | |
| 	int ret;
 | |
| 
 | |
| 	if (dir == SENDQ) {
 | |
| 		fifobar = ccb->ccb_u1.send_fifobar;
 | |
| 		desc = ccb->ccb_u2.send_desc;
 | |
| 	} else {
 | |
| 		fifobar = ccb->ccb_u3.recv_fifobar;
 | |
| 		desc = ccb->ccb_u4.recv_desc;
 | |
| 	}
 | |
| 
 | |
| 	ret = fifo_dequeue(hw, fifobar, &entry);
 | |
| 	if (ret) {
 | |
| 		pkt_id = get_entry_id(entry);
 | |
| 		if (id)
 | |
| 			*id = pkt_id;
 | |
| 		if (len)
 | |
| 			*len = get_entry_len(entry);
 | |
| 		if (pkt)
 | |
| 			*pkt = (void *)(desc + desc_mem_sz(pkt_id));
 | |
| 	}
 | |
| 
 | |
| 	return ret;
 | |
| }
 | |
| 
 | |
| static int ilo_pkt_recv(struct ilo_hwinfo *hw, struct ccb *ccb)
 | |
| {
 | |
| 	char *fifobar = ccb->ccb_u3.recv_fifobar;
 | |
| 
 | |
| 	return fifo_check_recv(hw, fifobar);
 | |
| }
 | |
| 
 | |
| static inline void doorbell_set(struct ccb *ccb)
 | |
| {
 | |
| 	iowrite8(1, ccb->ccb_u5.db_base);
 | |
| }
 | |
| 
 | |
| static inline void doorbell_clr(struct ccb *ccb)
 | |
| {
 | |
| 	iowrite8(2, ccb->ccb_u5.db_base);
 | |
| }
 | |
| 
 | |
| static inline int ctrl_set(int l2sz, int idxmask, int desclim)
 | |
| {
 | |
| 	int active = 0, go = 1;
 | |
| 	return l2sz << CTRL_BITPOS_L2SZ |
 | |
| 	       idxmask << CTRL_BITPOS_FIFOINDEXMASK |
 | |
| 	       desclim << CTRL_BITPOS_DESCLIMIT |
 | |
| 	       active << CTRL_BITPOS_A |
 | |
| 	       go << CTRL_BITPOS_G;
 | |
| }
 | |
| 
 | |
| static void ctrl_setup(struct ccb *ccb, int nr_desc, int l2desc_sz)
 | |
| {
 | |
| 	/* for simplicity, use the same parameters for send and recv ctrls */
 | |
| 	ccb->send_ctrl = ctrl_set(l2desc_sz, nr_desc-1, nr_desc-1);
 | |
| 	ccb->recv_ctrl = ctrl_set(l2desc_sz, nr_desc-1, nr_desc-1);
 | |
| }
 | |
| 
 | |
| static inline int fifo_sz(int nr_entry)
 | |
| {
 | |
| 	/* size of a fifo is determined by the number of entries it contains */
 | |
| 	return (nr_entry * sizeof(u64)) + FIFOHANDLESIZE;
 | |
| }
 | |
| 
 | |
| static void fifo_setup(void *base_addr, int nr_entry)
 | |
| {
 | |
| 	struct fifo *fifo_q = base_addr;
 | |
| 	int i;
 | |
| 
 | |
| 	/* set up an empty fifo */
 | |
| 	fifo_q->head = 0;
 | |
| 	fifo_q->tail = 0;
 | |
| 	fifo_q->reset = 0;
 | |
| 	fifo_q->nrents = nr_entry;
 | |
| 	fifo_q->imask = nr_entry - 1;
 | |
| 	fifo_q->merge = ENTRY_MASK_O;
 | |
| 
 | |
| 	for (i = 0; i < nr_entry; i++)
 | |
| 		fifo_q->fifobar[i] = 0;
 | |
| }
 | |
| 
 | |
| static void ilo_ccb_close(struct pci_dev *pdev, struct ccb_data *data)
 | |
| {
 | |
| 	struct ccb *driver_ccb = &data->driver_ccb;
 | |
| 	struct ccb __iomem *device_ccb = data->mapped_ccb;
 | |
| 	int retries;
 | |
| 
 | |
| 	/* complicated dance to tell the hw we are stopping */
 | |
| 	doorbell_clr(driver_ccb);
 | |
| 	iowrite32(ioread32(&device_ccb->send_ctrl) & ~(1 << CTRL_BITPOS_G),
 | |
| 		  &device_ccb->send_ctrl);
 | |
| 	iowrite32(ioread32(&device_ccb->recv_ctrl) & ~(1 << CTRL_BITPOS_G),
 | |
| 		  &device_ccb->recv_ctrl);
 | |
| 
 | |
| 	/* give iLO some time to process stop request */
 | |
| 	for (retries = MAX_WAIT; retries > 0; retries--) {
 | |
| 		doorbell_set(driver_ccb);
 | |
| 		udelay(WAIT_TIME);
 | |
| 		if (!(ioread32(&device_ccb->send_ctrl) & (1 << CTRL_BITPOS_A))
 | |
| 		    &&
 | |
| 		    !(ioread32(&device_ccb->recv_ctrl) & (1 << CTRL_BITPOS_A)))
 | |
| 			break;
 | |
| 	}
 | |
| 	if (retries == 0)
 | |
| 		dev_err(&pdev->dev, "Closing, but controller still active\n");
 | |
| 
 | |
| 	/* clear the hw ccb */
 | |
| 	memset_io(device_ccb, 0, sizeof(struct ccb));
 | |
| 
 | |
| 	/* free resources used to back send/recv queues */
 | |
| 	pci_free_consistent(pdev, data->dma_size, data->dma_va, data->dma_pa);
 | |
| }
 | |
| 
 | |
| static int ilo_ccb_setup(struct ilo_hwinfo *hw, struct ccb_data *data, int slot)
 | |
| {
 | |
| 	char *dma_va;
 | |
| 	dma_addr_t dma_pa;
 | |
| 	struct ccb *driver_ccb, *ilo_ccb;
 | |
| 
 | |
| 	driver_ccb = &data->driver_ccb;
 | |
| 	ilo_ccb = &data->ilo_ccb;
 | |
| 
 | |
| 	data->dma_size = 2 * fifo_sz(NR_QENTRY) +
 | |
| 			 2 * desc_mem_sz(NR_QENTRY) +
 | |
| 			 ILO_START_ALIGN + ILO_CACHE_SZ;
 | |
| 
 | |
| 	data->dma_va = pci_alloc_consistent(hw->ilo_dev, data->dma_size,
 | |
| 					    &data->dma_pa);
 | |
| 	if (!data->dma_va)
 | |
| 		return -ENOMEM;
 | |
| 
 | |
| 	dma_va = (char *)data->dma_va;
 | |
| 	dma_pa = data->dma_pa;
 | |
| 
 | |
| 	memset(dma_va, 0, data->dma_size);
 | |
| 
 | |
| 	dma_va = (char *)roundup((unsigned long)dma_va, ILO_START_ALIGN);
 | |
| 	dma_pa = roundup(dma_pa, ILO_START_ALIGN);
 | |
| 
 | |
| 	/*
 | |
| 	 * Create two ccb's, one with virt addrs, one with phys addrs.
 | |
| 	 * Copy the phys addr ccb to device shared mem.
 | |
| 	 */
 | |
| 	ctrl_setup(driver_ccb, NR_QENTRY, L2_QENTRY_SZ);
 | |
| 	ctrl_setup(ilo_ccb, NR_QENTRY, L2_QENTRY_SZ);
 | |
| 
 | |
| 	fifo_setup(dma_va, NR_QENTRY);
 | |
| 	driver_ccb->ccb_u1.send_fifobar = dma_va + FIFOHANDLESIZE;
 | |
| 	ilo_ccb->ccb_u1.send_fifobar_pa = dma_pa + FIFOHANDLESIZE;
 | |
| 	dma_va += fifo_sz(NR_QENTRY);
 | |
| 	dma_pa += fifo_sz(NR_QENTRY);
 | |
| 
 | |
| 	dma_va = (char *)roundup((unsigned long)dma_va, ILO_CACHE_SZ);
 | |
| 	dma_pa = roundup(dma_pa, ILO_CACHE_SZ);
 | |
| 
 | |
| 	fifo_setup(dma_va, NR_QENTRY);
 | |
| 	driver_ccb->ccb_u3.recv_fifobar = dma_va + FIFOHANDLESIZE;
 | |
| 	ilo_ccb->ccb_u3.recv_fifobar_pa = dma_pa + FIFOHANDLESIZE;
 | |
| 	dma_va += fifo_sz(NR_QENTRY);
 | |
| 	dma_pa += fifo_sz(NR_QENTRY);
 | |
| 
 | |
| 	driver_ccb->ccb_u2.send_desc = dma_va;
 | |
| 	ilo_ccb->ccb_u2.send_desc_pa = dma_pa;
 | |
| 	dma_pa += desc_mem_sz(NR_QENTRY);
 | |
| 	dma_va += desc_mem_sz(NR_QENTRY);
 | |
| 
 | |
| 	driver_ccb->ccb_u4.recv_desc = dma_va;
 | |
| 	ilo_ccb->ccb_u4.recv_desc_pa = dma_pa;
 | |
| 
 | |
| 	driver_ccb->channel = slot;
 | |
| 	ilo_ccb->channel = slot;
 | |
| 
 | |
| 	driver_ccb->ccb_u5.db_base = hw->db_vaddr + (slot << L2_DB_SIZE);
 | |
| 	ilo_ccb->ccb_u5.db_base = NULL; /* hw ccb's doorbell is not used */
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static void ilo_ccb_open(struct ilo_hwinfo *hw, struct ccb_data *data, int slot)
 | |
| {
 | |
| 	int pkt_id, pkt_sz;
 | |
| 	struct ccb *driver_ccb = &data->driver_ccb;
 | |
| 
 | |
| 	/* copy the ccb with physical addrs to device memory */
 | |
| 	data->mapped_ccb = (struct ccb __iomem *)
 | |
| 				(hw->ram_vaddr + (slot * ILOHW_CCB_SZ));
 | |
| 	memcpy_toio(data->mapped_ccb, &data->ilo_ccb, sizeof(struct ccb));
 | |
| 
 | |
| 	/* put packets on the send and receive queues */
 | |
| 	pkt_sz = 0;
 | |
| 	for (pkt_id = 0; pkt_id < NR_QENTRY; pkt_id++) {
 | |
| 		ilo_pkt_enqueue(hw, driver_ccb, SENDQ, pkt_id, pkt_sz);
 | |
| 		doorbell_set(driver_ccb);
 | |
| 	}
 | |
| 
 | |
| 	pkt_sz = desc_mem_sz(1);
 | |
| 	for (pkt_id = 0; pkt_id < NR_QENTRY; pkt_id++)
 | |
| 		ilo_pkt_enqueue(hw, driver_ccb, RECVQ, pkt_id, pkt_sz);
 | |
| 
 | |
| 	/* the ccb is ready to use */
 | |
| 	doorbell_clr(driver_ccb);
 | |
| }
 | |
| 
 | |
| static int ilo_ccb_verify(struct ilo_hwinfo *hw, struct ccb_data *data)
 | |
| {
 | |
| 	int pkt_id, i;
 | |
| 	struct ccb *driver_ccb = &data->driver_ccb;
 | |
| 
 | |
| 	/* make sure iLO is really handling requests */
 | |
| 	for (i = MAX_WAIT; i > 0; i--) {
 | |
| 		if (ilo_pkt_dequeue(hw, driver_ccb, SENDQ, &pkt_id, NULL, NULL))
 | |
| 			break;
 | |
| 		udelay(WAIT_TIME);
 | |
| 	}
 | |
| 
 | |
| 	if (i == 0) {
 | |
| 		dev_err(&hw->ilo_dev->dev, "Open could not dequeue a packet\n");
 | |
| 		return -EBUSY;
 | |
| 	}
 | |
| 
 | |
| 	ilo_pkt_enqueue(hw, driver_ccb, SENDQ, pkt_id, 0);
 | |
| 	doorbell_set(driver_ccb);
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static inline int is_channel_reset(struct ccb *ccb)
 | |
| {
 | |
| 	/* check for this particular channel needing a reset */
 | |
| 	return FIFOBARTOHANDLE(ccb->ccb_u1.send_fifobar)->reset;
 | |
| }
 | |
| 
 | |
| static inline void set_channel_reset(struct ccb *ccb)
 | |
| {
 | |
| 	/* set a flag indicating this channel needs a reset */
 | |
| 	FIFOBARTOHANDLE(ccb->ccb_u1.send_fifobar)->reset = 1;
 | |
| }
 | |
| 
 | |
| static inline int get_device_outbound(struct ilo_hwinfo *hw)
 | |
| {
 | |
| 	return ioread32(&hw->mmio_vaddr[DB_OUT]);
 | |
| }
 | |
| 
 | |
| static inline int is_db_reset(int db_out)
 | |
| {
 | |
| 	return db_out & (1 << DB_RESET);
 | |
| }
 | |
| 
 | |
| static inline int is_device_reset(struct ilo_hwinfo *hw)
 | |
| {
 | |
| 	/* check for global reset condition */
 | |
| 	return is_db_reset(get_device_outbound(hw));
 | |
| }
 | |
| 
 | |
| static inline void clear_pending_db(struct ilo_hwinfo *hw, int clr)
 | |
| {
 | |
| 	iowrite32(clr, &hw->mmio_vaddr[DB_OUT]);
 | |
| }
 | |
| 
 | |
| static inline void clear_device(struct ilo_hwinfo *hw)
 | |
| {
 | |
| 	/* clear the device (reset bits, pending channel entries) */
 | |
| 	clear_pending_db(hw, -1);
 | |
| }
 | |
| 
 | |
| static inline void ilo_enable_interrupts(struct ilo_hwinfo *hw)
 | |
| {
 | |
| 	iowrite8(ioread8(&hw->mmio_vaddr[DB_IRQ]) | 1, &hw->mmio_vaddr[DB_IRQ]);
 | |
| }
 | |
| 
 | |
| static inline void ilo_disable_interrupts(struct ilo_hwinfo *hw)
 | |
| {
 | |
| 	iowrite8(ioread8(&hw->mmio_vaddr[DB_IRQ]) & ~1,
 | |
| 		 &hw->mmio_vaddr[DB_IRQ]);
 | |
| }
 | |
| 
 | |
| static void ilo_set_reset(struct ilo_hwinfo *hw)
 | |
| {
 | |
| 	int slot;
 | |
| 
 | |
| 	/*
 | |
| 	 * Mapped memory is zeroed on ilo reset, so set a per ccb flag
 | |
| 	 * to indicate that this ccb needs to be closed and reopened.
 | |
| 	 */
 | |
| 	for (slot = 0; slot < MAX_CCB; slot++) {
 | |
| 		if (!hw->ccb_alloc[slot])
 | |
| 			continue;
 | |
| 		set_channel_reset(&hw->ccb_alloc[slot]->driver_ccb);
 | |
| 	}
 | |
| }
 | |
| 
 | |
| static ssize_t ilo_read(struct file *fp, char __user *buf,
 | |
| 			size_t len, loff_t *off)
 | |
| {
 | |
| 	int err, found, cnt, pkt_id, pkt_len;
 | |
| 	struct ccb_data *data = fp->private_data;
 | |
| 	struct ccb *driver_ccb = &data->driver_ccb;
 | |
| 	struct ilo_hwinfo *hw = data->ilo_hw;
 | |
| 	void *pkt;
 | |
| 
 | |
| 	if (is_channel_reset(driver_ccb)) {
 | |
| 		/*
 | |
| 		 * If the device has been reset, applications
 | |
| 		 * need to close and reopen all ccbs.
 | |
| 		 */
 | |
| 		return -ENODEV;
 | |
| 	}
 | |
| 
 | |
| 	/*
 | |
| 	 * This function is to be called when data is expected
 | |
| 	 * in the channel, and will return an error if no packet is found
 | |
| 	 * during the loop below.  The sleep/retry logic is to allow
 | |
| 	 * applications to call read() immediately post write(),
 | |
| 	 * and give iLO some time to process the sent packet.
 | |
| 	 */
 | |
| 	cnt = 20;
 | |
| 	do {
 | |
| 		/* look for a received packet */
 | |
| 		found = ilo_pkt_dequeue(hw, driver_ccb, RECVQ, &pkt_id,
 | |
| 					&pkt_len, &pkt);
 | |
| 		if (found)
 | |
| 			break;
 | |
| 		cnt--;
 | |
| 		msleep(100);
 | |
| 	} while (!found && cnt);
 | |
| 
 | |
| 	if (!found)
 | |
| 		return -EAGAIN;
 | |
| 
 | |
| 	/* only copy the length of the received packet */
 | |
| 	if (pkt_len < len)
 | |
| 		len = pkt_len;
 | |
| 
 | |
| 	err = copy_to_user(buf, pkt, len);
 | |
| 
 | |
| 	/* return the received packet to the queue */
 | |
| 	ilo_pkt_enqueue(hw, driver_ccb, RECVQ, pkt_id, desc_mem_sz(1));
 | |
| 
 | |
| 	return err ? -EFAULT : len;
 | |
| }
 | |
| 
 | |
| static ssize_t ilo_write(struct file *fp, const char __user *buf,
 | |
| 			 size_t len, loff_t *off)
 | |
| {
 | |
| 	int err, pkt_id, pkt_len;
 | |
| 	struct ccb_data *data = fp->private_data;
 | |
| 	struct ccb *driver_ccb = &data->driver_ccb;
 | |
| 	struct ilo_hwinfo *hw = data->ilo_hw;
 | |
| 	void *pkt;
 | |
| 
 | |
| 	if (is_channel_reset(driver_ccb))
 | |
| 		return -ENODEV;
 | |
| 
 | |
| 	/* get a packet to send the user command */
 | |
| 	if (!ilo_pkt_dequeue(hw, driver_ccb, SENDQ, &pkt_id, &pkt_len, &pkt))
 | |
| 		return -EBUSY;
 | |
| 
 | |
| 	/* limit the length to the length of the packet */
 | |
| 	if (pkt_len < len)
 | |
| 		len = pkt_len;
 | |
| 
 | |
| 	/* on failure, set the len to 0 to return empty packet to the device */
 | |
| 	err = copy_from_user(pkt, buf, len);
 | |
| 	if (err)
 | |
| 		len = 0;
 | |
| 
 | |
| 	/* send the packet */
 | |
| 	ilo_pkt_enqueue(hw, driver_ccb, SENDQ, pkt_id, len);
 | |
| 	doorbell_set(driver_ccb);
 | |
| 
 | |
| 	return err ? -EFAULT : len;
 | |
| }
 | |
| 
 | |
| static unsigned int ilo_poll(struct file *fp, poll_table *wait)
 | |
| {
 | |
| 	struct ccb_data *data = fp->private_data;
 | |
| 	struct ccb *driver_ccb = &data->driver_ccb;
 | |
| 
 | |
| 	poll_wait(fp, &data->ccb_waitq, wait);
 | |
| 
 | |
| 	if (is_channel_reset(driver_ccb))
 | |
| 		return POLLERR;
 | |
| 	else if (ilo_pkt_recv(data->ilo_hw, driver_ccb))
 | |
| 		return POLLIN | POLLRDNORM;
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int ilo_close(struct inode *ip, struct file *fp)
 | |
| {
 | |
| 	int slot;
 | |
| 	struct ccb_data *data;
 | |
| 	struct ilo_hwinfo *hw;
 | |
| 	unsigned long flags;
 | |
| 
 | |
| 	slot = iminor(ip) % MAX_CCB;
 | |
| 	hw = container_of(ip->i_cdev, struct ilo_hwinfo, cdev);
 | |
| 
 | |
| 	spin_lock(&hw->open_lock);
 | |
| 
 | |
| 	if (hw->ccb_alloc[slot]->ccb_cnt == 1) {
 | |
| 
 | |
| 		data = fp->private_data;
 | |
| 
 | |
| 		spin_lock_irqsave(&hw->alloc_lock, flags);
 | |
| 		hw->ccb_alloc[slot] = NULL;
 | |
| 		spin_unlock_irqrestore(&hw->alloc_lock, flags);
 | |
| 
 | |
| 		ilo_ccb_close(hw->ilo_dev, data);
 | |
| 
 | |
| 		kfree(data);
 | |
| 	} else
 | |
| 		hw->ccb_alloc[slot]->ccb_cnt--;
 | |
| 
 | |
| 	spin_unlock(&hw->open_lock);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int ilo_open(struct inode *ip, struct file *fp)
 | |
| {
 | |
| 	int slot, error;
 | |
| 	struct ccb_data *data;
 | |
| 	struct ilo_hwinfo *hw;
 | |
| 	unsigned long flags;
 | |
| 
 | |
| 	slot = iminor(ip) % MAX_CCB;
 | |
| 	hw = container_of(ip->i_cdev, struct ilo_hwinfo, cdev);
 | |
| 
 | |
| 	/* new ccb allocation */
 | |
| 	data = kzalloc(sizeof(*data), GFP_KERNEL);
 | |
| 	if (!data)
 | |
| 		return -ENOMEM;
 | |
| 
 | |
| 	spin_lock(&hw->open_lock);
 | |
| 
 | |
| 	/* each fd private_data holds sw/hw view of ccb */
 | |
| 	if (hw->ccb_alloc[slot] == NULL) {
 | |
| 		/* create a channel control block for this minor */
 | |
| 		error = ilo_ccb_setup(hw, data, slot);
 | |
| 		if (error) {
 | |
| 			kfree(data);
 | |
| 			goto out;
 | |
| 		}
 | |
| 
 | |
| 		data->ccb_cnt = 1;
 | |
| 		data->ccb_excl = fp->f_flags & O_EXCL;
 | |
| 		data->ilo_hw = hw;
 | |
| 		init_waitqueue_head(&data->ccb_waitq);
 | |
| 
 | |
| 		/* write the ccb to hw */
 | |
| 		spin_lock_irqsave(&hw->alloc_lock, flags);
 | |
| 		ilo_ccb_open(hw, data, slot);
 | |
| 		hw->ccb_alloc[slot] = data;
 | |
| 		spin_unlock_irqrestore(&hw->alloc_lock, flags);
 | |
| 
 | |
| 		/* make sure the channel is functional */
 | |
| 		error = ilo_ccb_verify(hw, data);
 | |
| 		if (error) {
 | |
| 
 | |
| 			spin_lock_irqsave(&hw->alloc_lock, flags);
 | |
| 			hw->ccb_alloc[slot] = NULL;
 | |
| 			spin_unlock_irqrestore(&hw->alloc_lock, flags);
 | |
| 
 | |
| 			ilo_ccb_close(hw->ilo_dev, data);
 | |
| 
 | |
| 			kfree(data);
 | |
| 			goto out;
 | |
| 		}
 | |
| 
 | |
| 	} else {
 | |
| 		kfree(data);
 | |
| 		if (fp->f_flags & O_EXCL || hw->ccb_alloc[slot]->ccb_excl) {
 | |
| 			/*
 | |
| 			 * The channel exists, and either this open
 | |
| 			 * or a previous open of this channel wants
 | |
| 			 * exclusive access.
 | |
| 			 */
 | |
| 			error = -EBUSY;
 | |
| 		} else {
 | |
| 			hw->ccb_alloc[slot]->ccb_cnt++;
 | |
| 			error = 0;
 | |
| 		}
 | |
| 	}
 | |
| out:
 | |
| 	spin_unlock(&hw->open_lock);
 | |
| 
 | |
| 	if (!error)
 | |
| 		fp->private_data = hw->ccb_alloc[slot];
 | |
| 
 | |
| 	return error;
 | |
| }
 | |
| 
 | |
| static const struct file_operations ilo_fops = {
 | |
| 	.owner		= THIS_MODULE,
 | |
| 	.read		= ilo_read,
 | |
| 	.write		= ilo_write,
 | |
| 	.poll		= ilo_poll,
 | |
| 	.open 		= ilo_open,
 | |
| 	.release 	= ilo_close,
 | |
| 	.llseek		= noop_llseek,
 | |
| };
 | |
| 
 | |
| static irqreturn_t ilo_isr(int irq, void *data)
 | |
| {
 | |
| 	struct ilo_hwinfo *hw = data;
 | |
| 	int pending, i;
 | |
| 
 | |
| 	spin_lock(&hw->alloc_lock);
 | |
| 
 | |
| 	/* check for ccbs which have data */
 | |
| 	pending = get_device_outbound(hw);
 | |
| 	if (!pending) {
 | |
| 		spin_unlock(&hw->alloc_lock);
 | |
| 		return IRQ_NONE;
 | |
| 	}
 | |
| 
 | |
| 	if (is_db_reset(pending)) {
 | |
| 		/* wake up all ccbs if the device was reset */
 | |
| 		pending = -1;
 | |
| 		ilo_set_reset(hw);
 | |
| 	}
 | |
| 
 | |
| 	for (i = 0; i < MAX_CCB; i++) {
 | |
| 		if (!hw->ccb_alloc[i])
 | |
| 			continue;
 | |
| 		if (pending & (1 << i))
 | |
| 			wake_up_interruptible(&hw->ccb_alloc[i]->ccb_waitq);
 | |
| 	}
 | |
| 
 | |
| 	/* clear the device of the channels that have been handled */
 | |
| 	clear_pending_db(hw, pending);
 | |
| 
 | |
| 	spin_unlock(&hw->alloc_lock);
 | |
| 
 | |
| 	return IRQ_HANDLED;
 | |
| }
 | |
| 
 | |
| static void ilo_unmap_device(struct pci_dev *pdev, struct ilo_hwinfo *hw)
 | |
| {
 | |
| 	pci_iounmap(pdev, hw->db_vaddr);
 | |
| 	pci_iounmap(pdev, hw->ram_vaddr);
 | |
| 	pci_iounmap(pdev, hw->mmio_vaddr);
 | |
| }
 | |
| 
 | |
| static int __devinit ilo_map_device(struct pci_dev *pdev, struct ilo_hwinfo *hw)
 | |
| {
 | |
| 	int error = -ENOMEM;
 | |
| 
 | |
| 	/* map the memory mapped i/o registers */
 | |
| 	hw->mmio_vaddr = pci_iomap(pdev, 1, 0);
 | |
| 	if (hw->mmio_vaddr == NULL) {
 | |
| 		dev_err(&pdev->dev, "Error mapping mmio\n");
 | |
| 		goto out;
 | |
| 	}
 | |
| 
 | |
| 	/* map the adapter shared memory region */
 | |
| 	hw->ram_vaddr = pci_iomap(pdev, 2, MAX_CCB * ILOHW_CCB_SZ);
 | |
| 	if (hw->ram_vaddr == NULL) {
 | |
| 		dev_err(&pdev->dev, "Error mapping shared mem\n");
 | |
| 		goto mmio_free;
 | |
| 	}
 | |
| 
 | |
| 	/* map the doorbell aperture */
 | |
| 	hw->db_vaddr = pci_iomap(pdev, 3, MAX_CCB * ONE_DB_SIZE);
 | |
| 	if (hw->db_vaddr == NULL) {
 | |
| 		dev_err(&pdev->dev, "Error mapping doorbell\n");
 | |
| 		goto ram_free;
 | |
| 	}
 | |
| 
 | |
| 	return 0;
 | |
| ram_free:
 | |
| 	pci_iounmap(pdev, hw->ram_vaddr);
 | |
| mmio_free:
 | |
| 	pci_iounmap(pdev, hw->mmio_vaddr);
 | |
| out:
 | |
| 	return error;
 | |
| }
 | |
| 
 | |
| static void ilo_remove(struct pci_dev *pdev)
 | |
| {
 | |
| 	int i, minor;
 | |
| 	struct ilo_hwinfo *ilo_hw = pci_get_drvdata(pdev);
 | |
| 
 | |
| 	clear_device(ilo_hw);
 | |
| 
 | |
| 	minor = MINOR(ilo_hw->cdev.dev);
 | |
| 	for (i = minor; i < minor + MAX_CCB; i++)
 | |
| 		device_destroy(ilo_class, MKDEV(ilo_major, i));
 | |
| 
 | |
| 	cdev_del(&ilo_hw->cdev);
 | |
| 	ilo_disable_interrupts(ilo_hw);
 | |
| 	free_irq(pdev->irq, ilo_hw);
 | |
| 	ilo_unmap_device(pdev, ilo_hw);
 | |
| 	pci_release_regions(pdev);
 | |
| 	pci_disable_device(pdev);
 | |
| 	kfree(ilo_hw);
 | |
| 	ilo_hwdev[(minor / MAX_CCB)] = 0;
 | |
| }
 | |
| 
 | |
| static int __devinit ilo_probe(struct pci_dev *pdev,
 | |
| 			       const struct pci_device_id *ent)
 | |
| {
 | |
| 	int devnum, minor, start, error;
 | |
| 	struct ilo_hwinfo *ilo_hw;
 | |
| 
 | |
| 	/* find a free range for device files */
 | |
| 	for (devnum = 0; devnum < MAX_ILO_DEV; devnum++) {
 | |
| 		if (ilo_hwdev[devnum] == 0) {
 | |
| 			ilo_hwdev[devnum] = 1;
 | |
| 			break;
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	if (devnum == MAX_ILO_DEV) {
 | |
| 		dev_err(&pdev->dev, "Error finding free device\n");
 | |
| 		return -ENODEV;
 | |
| 	}
 | |
| 
 | |
| 	/* track global allocations for this device */
 | |
| 	error = -ENOMEM;
 | |
| 	ilo_hw = kzalloc(sizeof(*ilo_hw), GFP_KERNEL);
 | |
| 	if (!ilo_hw)
 | |
| 		goto out;
 | |
| 
 | |
| 	ilo_hw->ilo_dev = pdev;
 | |
| 	spin_lock_init(&ilo_hw->alloc_lock);
 | |
| 	spin_lock_init(&ilo_hw->fifo_lock);
 | |
| 	spin_lock_init(&ilo_hw->open_lock);
 | |
| 
 | |
| 	error = pci_enable_device(pdev);
 | |
| 	if (error)
 | |
| 		goto free;
 | |
| 
 | |
| 	pci_set_master(pdev);
 | |
| 
 | |
| 	error = pci_request_regions(pdev, ILO_NAME);
 | |
| 	if (error)
 | |
| 		goto disable;
 | |
| 
 | |
| 	error = ilo_map_device(pdev, ilo_hw);
 | |
| 	if (error)
 | |
| 		goto free_regions;
 | |
| 
 | |
| 	pci_set_drvdata(pdev, ilo_hw);
 | |
| 	clear_device(ilo_hw);
 | |
| 
 | |
| 	error = request_irq(pdev->irq, ilo_isr, IRQF_SHARED, "hpilo", ilo_hw);
 | |
| 	if (error)
 | |
| 		goto unmap;
 | |
| 
 | |
| 	ilo_enable_interrupts(ilo_hw);
 | |
| 
 | |
| 	cdev_init(&ilo_hw->cdev, &ilo_fops);
 | |
| 	ilo_hw->cdev.owner = THIS_MODULE;
 | |
| 	start = devnum * MAX_CCB;
 | |
| 	error = cdev_add(&ilo_hw->cdev, MKDEV(ilo_major, start), MAX_CCB);
 | |
| 	if (error) {
 | |
| 		dev_err(&pdev->dev, "Could not add cdev\n");
 | |
| 		goto remove_isr;
 | |
| 	}
 | |
| 
 | |
| 	for (minor = 0 ; minor < MAX_CCB; minor++) {
 | |
| 		struct device *dev;
 | |
| 		dev = device_create(ilo_class, &pdev->dev,
 | |
| 				    MKDEV(ilo_major, minor), NULL,
 | |
| 				    "hpilo!d%dccb%d", devnum, minor);
 | |
| 		if (IS_ERR(dev))
 | |
| 			dev_err(&pdev->dev, "Could not create files\n");
 | |
| 	}
 | |
| 
 | |
| 	return 0;
 | |
| remove_isr:
 | |
| 	ilo_disable_interrupts(ilo_hw);
 | |
| 	free_irq(pdev->irq, ilo_hw);
 | |
| unmap:
 | |
| 	ilo_unmap_device(pdev, ilo_hw);
 | |
| free_regions:
 | |
| 	pci_release_regions(pdev);
 | |
| disable:
 | |
| 	pci_disable_device(pdev);
 | |
| free:
 | |
| 	kfree(ilo_hw);
 | |
| out:
 | |
| 	ilo_hwdev[devnum] = 0;
 | |
| 	return error;
 | |
| }
 | |
| 
 | |
| static struct pci_device_id ilo_devices[] = {
 | |
| 	{ PCI_DEVICE(PCI_VENDOR_ID_COMPAQ, 0xB204) },
 | |
| 	{ PCI_DEVICE(PCI_VENDOR_ID_HP, 0x3307) },
 | |
| 	{ }
 | |
| };
 | |
| MODULE_DEVICE_TABLE(pci, ilo_devices);
 | |
| 
 | |
| static struct pci_driver ilo_driver = {
 | |
| 	.name 	  = ILO_NAME,
 | |
| 	.id_table = ilo_devices,
 | |
| 	.probe 	  = ilo_probe,
 | |
| 	.remove   = __devexit_p(ilo_remove),
 | |
| };
 | |
| 
 | |
| static int __init ilo_init(void)
 | |
| {
 | |
| 	int error;
 | |
| 	dev_t dev;
 | |
| 
 | |
| 	ilo_class = class_create(THIS_MODULE, "iLO");
 | |
| 	if (IS_ERR(ilo_class)) {
 | |
| 		error = PTR_ERR(ilo_class);
 | |
| 		goto out;
 | |
| 	}
 | |
| 
 | |
| 	error = alloc_chrdev_region(&dev, 0, MAX_OPEN, ILO_NAME);
 | |
| 	if (error)
 | |
| 		goto class_destroy;
 | |
| 
 | |
| 	ilo_major = MAJOR(dev);
 | |
| 
 | |
| 	error =	pci_register_driver(&ilo_driver);
 | |
| 	if (error)
 | |
| 		goto chr_remove;
 | |
| 
 | |
| 	return 0;
 | |
| chr_remove:
 | |
| 	unregister_chrdev_region(dev, MAX_OPEN);
 | |
| class_destroy:
 | |
| 	class_destroy(ilo_class);
 | |
| out:
 | |
| 	return error;
 | |
| }
 | |
| 
 | |
| static void __exit ilo_exit(void)
 | |
| {
 | |
| 	pci_unregister_driver(&ilo_driver);
 | |
| 	unregister_chrdev_region(MKDEV(ilo_major, 0), MAX_OPEN);
 | |
| 	class_destroy(ilo_class);
 | |
| }
 | |
| 
 | |
| MODULE_VERSION("1.2");
 | |
| MODULE_ALIAS(ILO_NAME);
 | |
| MODULE_DESCRIPTION(ILO_NAME);
 | |
| MODULE_AUTHOR("David Altobelli <david.altobelli@hp.com>");
 | |
| MODULE_LICENSE("GPL v2");
 | |
| 
 | |
| module_init(ilo_init);
 | |
| module_exit(ilo_exit);
 |