 c103de2404
			
		
	
	
	c103de2404
	
	
	
		
			
			Sort the gpio makefile and enforce the naming convention gpio-*.c for gpio drivers. v2: cleaned up filenames in Kconfig and comment blocks v3: fixup use of BASIC_MMIO to GENERIC_GPIO for mxc Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
		
			
				
	
	
		
			680 lines
		
	
	
	
		
			16 KiB
			
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			680 lines
		
	
	
	
		
			16 KiB
			
		
	
	
	
		
			C
		
	
	
	
	
	
| /* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
 | |
|  *
 | |
|  * This program is free software; you can redistribute it and/or modify
 | |
|  * it under the terms of the GNU General Public License version 2 and
 | |
|  * only version 2 as published by the Free Software Foundation.
 | |
|  *
 | |
|  * This program is distributed in the hope that it will be useful,
 | |
|  * but WITHOUT ANY WARRANTY; without even the implied warranty of
 | |
|  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 | |
|  * GNU General Public License for more details.
 | |
|  *
 | |
|  * You should have received a copy of the GNU General Public License
 | |
|  * along with this program; if not, write to the Free Software
 | |
|  * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
 | |
|  * 02110-1301, USA.
 | |
|  */
 | |
| #include <linux/gpio.h>
 | |
| #include <linux/i2c.h>
 | |
| #include <linux/init.h>
 | |
| #include <linux/interrupt.h>
 | |
| #include <linux/irq.h>
 | |
| #include <linux/module.h>
 | |
| #include <linux/mutex.h>
 | |
| #include <linux/slab.h>
 | |
| #include <linux/workqueue.h>
 | |
| #include <linux/i2c/sx150x.h>
 | |
| 
 | |
| #define NO_UPDATE_PENDING	-1
 | |
| 
 | |
| struct sx150x_device_data {
 | |
| 	u8 reg_pullup;
 | |
| 	u8 reg_pulldn;
 | |
| 	u8 reg_drain;
 | |
| 	u8 reg_polarity;
 | |
| 	u8 reg_dir;
 | |
| 	u8 reg_data;
 | |
| 	u8 reg_irq_mask;
 | |
| 	u8 reg_irq_src;
 | |
| 	u8 reg_sense;
 | |
| 	u8 reg_clock;
 | |
| 	u8 reg_misc;
 | |
| 	u8 reg_reset;
 | |
| 	u8 ngpios;
 | |
| };
 | |
| 
 | |
| struct sx150x_chip {
 | |
| 	struct gpio_chip                 gpio_chip;
 | |
| 	struct i2c_client               *client;
 | |
| 	const struct sx150x_device_data *dev_cfg;
 | |
| 	int                              irq_summary;
 | |
| 	int                              irq_base;
 | |
| 	int				 irq_update;
 | |
| 	u32                              irq_sense;
 | |
| 	u32				 irq_masked;
 | |
| 	u32				 dev_sense;
 | |
| 	u32				 dev_masked;
 | |
| 	struct irq_chip                  irq_chip;
 | |
| 	struct mutex                     lock;
 | |
| };
 | |
| 
 | |
| static const struct sx150x_device_data sx150x_devices[] = {
 | |
| 	[0] = { /* sx1508q */
 | |
| 		.reg_pullup   = 0x03,
 | |
| 		.reg_pulldn   = 0x04,
 | |
| 		.reg_drain    = 0x05,
 | |
| 		.reg_polarity = 0x06,
 | |
| 		.reg_dir      = 0x07,
 | |
| 		.reg_data     = 0x08,
 | |
| 		.reg_irq_mask = 0x09,
 | |
| 		.reg_irq_src  = 0x0c,
 | |
| 		.reg_sense    = 0x0b,
 | |
| 		.reg_clock    = 0x0f,
 | |
| 		.reg_misc     = 0x10,
 | |
| 		.reg_reset    = 0x7d,
 | |
| 		.ngpios       = 8
 | |
| 	},
 | |
| 	[1] = { /* sx1509q */
 | |
| 		.reg_pullup   = 0x07,
 | |
| 		.reg_pulldn   = 0x09,
 | |
| 		.reg_drain    = 0x0b,
 | |
| 		.reg_polarity = 0x0d,
 | |
| 		.reg_dir      = 0x0f,
 | |
| 		.reg_data     = 0x11,
 | |
| 		.reg_irq_mask = 0x13,
 | |
| 		.reg_irq_src  = 0x19,
 | |
| 		.reg_sense    = 0x17,
 | |
| 		.reg_clock    = 0x1e,
 | |
| 		.reg_misc     = 0x1f,
 | |
| 		.reg_reset    = 0x7d,
 | |
| 		.ngpios       = 16
 | |
| 	},
 | |
| };
 | |
| 
 | |
| static const struct i2c_device_id sx150x_id[] = {
 | |
| 	{"sx1508q", 0},
 | |
| 	{"sx1509q", 1},
 | |
| 	{}
 | |
| };
 | |
| MODULE_DEVICE_TABLE(i2c, sx150x_id);
 | |
| 
 | |
| static s32 sx150x_i2c_write(struct i2c_client *client, u8 reg, u8 val)
 | |
| {
 | |
| 	s32 err = i2c_smbus_write_byte_data(client, reg, val);
 | |
| 
 | |
| 	if (err < 0)
 | |
| 		dev_warn(&client->dev,
 | |
| 			"i2c write fail: can't write %02x to %02x: %d\n",
 | |
| 			val, reg, err);
 | |
| 	return err;
 | |
| }
 | |
| 
 | |
| static s32 sx150x_i2c_read(struct i2c_client *client, u8 reg, u8 *val)
 | |
| {
 | |
| 	s32 err = i2c_smbus_read_byte_data(client, reg);
 | |
| 
 | |
| 	if (err >= 0)
 | |
| 		*val = err;
 | |
| 	else
 | |
| 		dev_warn(&client->dev,
 | |
| 			"i2c read fail: can't read from %02x: %d\n",
 | |
| 			reg, err);
 | |
| 	return err;
 | |
| }
 | |
| 
 | |
| static inline bool offset_is_oscio(struct sx150x_chip *chip, unsigned offset)
 | |
| {
 | |
| 	return (chip->dev_cfg->ngpios == offset);
 | |
| }
 | |
| 
 | |
| /*
 | |
|  * These utility functions solve the common problem of locating and setting
 | |
|  * configuration bits.  Configuration bits are grouped into registers
 | |
|  * whose indexes increase downwards.  For example, with eight-bit registers,
 | |
|  * sixteen gpios would have their config bits grouped in the following order:
 | |
|  * REGISTER N-1 [ f e d c b a 9 8 ]
 | |
|  *          N   [ 7 6 5 4 3 2 1 0 ]
 | |
|  *
 | |
|  * For multi-bit configurations, the pattern gets wider:
 | |
|  * REGISTER N-3 [ f f e e d d c c ]
 | |
|  *          N-2 [ b b a a 9 9 8 8 ]
 | |
|  *          N-1 [ 7 7 6 6 5 5 4 4 ]
 | |
|  *          N   [ 3 3 2 2 1 1 0 0 ]
 | |
|  *
 | |
|  * Given the address of the starting register 'N', the index of the gpio
 | |
|  * whose configuration we seek to change, and the width in bits of that
 | |
|  * configuration, these functions allow us to locate the correct
 | |
|  * register and mask the correct bits.
 | |
|  */
 | |
| static inline void sx150x_find_cfg(u8 offset, u8 width,
 | |
| 				u8 *reg, u8 *mask, u8 *shift)
 | |
| {
 | |
| 	*reg   -= offset * width / 8;
 | |
| 	*mask   = (1 << width) - 1;
 | |
| 	*shift  = (offset * width) % 8;
 | |
| 	*mask <<= *shift;
 | |
| }
 | |
| 
 | |
| static s32 sx150x_write_cfg(struct sx150x_chip *chip,
 | |
| 			u8 offset, u8 width, u8 reg, u8 val)
 | |
| {
 | |
| 	u8  mask;
 | |
| 	u8  data;
 | |
| 	u8  shift;
 | |
| 	s32 err;
 | |
| 
 | |
| 	sx150x_find_cfg(offset, width, ®, &mask, &shift);
 | |
| 	err = sx150x_i2c_read(chip->client, reg, &data);
 | |
| 	if (err < 0)
 | |
| 		return err;
 | |
| 
 | |
| 	data &= ~mask;
 | |
| 	data |= (val << shift) & mask;
 | |
| 	return sx150x_i2c_write(chip->client, reg, data);
 | |
| }
 | |
| 
 | |
| static int sx150x_get_io(struct sx150x_chip *chip, unsigned offset)
 | |
| {
 | |
| 	u8  reg = chip->dev_cfg->reg_data;
 | |
| 	u8  mask;
 | |
| 	u8  data;
 | |
| 	u8  shift;
 | |
| 	s32 err;
 | |
| 
 | |
| 	sx150x_find_cfg(offset, 1, ®, &mask, &shift);
 | |
| 	err = sx150x_i2c_read(chip->client, reg, &data);
 | |
| 	if (err >= 0)
 | |
| 		err = (data & mask) != 0 ? 1 : 0;
 | |
| 
 | |
| 	return err;
 | |
| }
 | |
| 
 | |
| static void sx150x_set_oscio(struct sx150x_chip *chip, int val)
 | |
| {
 | |
| 	sx150x_i2c_write(chip->client,
 | |
| 			chip->dev_cfg->reg_clock,
 | |
| 			(val ? 0x1f : 0x10));
 | |
| }
 | |
| 
 | |
| static void sx150x_set_io(struct sx150x_chip *chip, unsigned offset, int val)
 | |
| {
 | |
| 	sx150x_write_cfg(chip,
 | |
| 			offset,
 | |
| 			1,
 | |
| 			chip->dev_cfg->reg_data,
 | |
| 			(val ? 1 : 0));
 | |
| }
 | |
| 
 | |
| static int sx150x_io_input(struct sx150x_chip *chip, unsigned offset)
 | |
| {
 | |
| 	return sx150x_write_cfg(chip,
 | |
| 				offset,
 | |
| 				1,
 | |
| 				chip->dev_cfg->reg_dir,
 | |
| 				1);
 | |
| }
 | |
| 
 | |
| static int sx150x_io_output(struct sx150x_chip *chip, unsigned offset, int val)
 | |
| {
 | |
| 	int err;
 | |
| 
 | |
| 	err = sx150x_write_cfg(chip,
 | |
| 			offset,
 | |
| 			1,
 | |
| 			chip->dev_cfg->reg_data,
 | |
| 			(val ? 1 : 0));
 | |
| 	if (err >= 0)
 | |
| 		err = sx150x_write_cfg(chip,
 | |
| 				offset,
 | |
| 				1,
 | |
| 				chip->dev_cfg->reg_dir,
 | |
| 				0);
 | |
| 	return err;
 | |
| }
 | |
| 
 | |
| static int sx150x_gpio_get(struct gpio_chip *gc, unsigned offset)
 | |
| {
 | |
| 	struct sx150x_chip *chip;
 | |
| 	int status = -EINVAL;
 | |
| 
 | |
| 	chip = container_of(gc, struct sx150x_chip, gpio_chip);
 | |
| 
 | |
| 	if (!offset_is_oscio(chip, offset)) {
 | |
| 		mutex_lock(&chip->lock);
 | |
| 		status = sx150x_get_io(chip, offset);
 | |
| 		mutex_unlock(&chip->lock);
 | |
| 	}
 | |
| 
 | |
| 	return status;
 | |
| }
 | |
| 
 | |
| static void sx150x_gpio_set(struct gpio_chip *gc, unsigned offset, int val)
 | |
| {
 | |
| 	struct sx150x_chip *chip;
 | |
| 
 | |
| 	chip = container_of(gc, struct sx150x_chip, gpio_chip);
 | |
| 
 | |
| 	mutex_lock(&chip->lock);
 | |
| 	if (offset_is_oscio(chip, offset))
 | |
| 		sx150x_set_oscio(chip, val);
 | |
| 	else
 | |
| 		sx150x_set_io(chip, offset, val);
 | |
| 	mutex_unlock(&chip->lock);
 | |
| }
 | |
| 
 | |
| static int sx150x_gpio_direction_input(struct gpio_chip *gc, unsigned offset)
 | |
| {
 | |
| 	struct sx150x_chip *chip;
 | |
| 	int status = -EINVAL;
 | |
| 
 | |
| 	chip = container_of(gc, struct sx150x_chip, gpio_chip);
 | |
| 
 | |
| 	if (!offset_is_oscio(chip, offset)) {
 | |
| 		mutex_lock(&chip->lock);
 | |
| 		status = sx150x_io_input(chip, offset);
 | |
| 		mutex_unlock(&chip->lock);
 | |
| 	}
 | |
| 	return status;
 | |
| }
 | |
| 
 | |
| static int sx150x_gpio_direction_output(struct gpio_chip *gc,
 | |
| 					unsigned offset,
 | |
| 					int val)
 | |
| {
 | |
| 	struct sx150x_chip *chip;
 | |
| 	int status = 0;
 | |
| 
 | |
| 	chip = container_of(gc, struct sx150x_chip, gpio_chip);
 | |
| 
 | |
| 	if (!offset_is_oscio(chip, offset)) {
 | |
| 		mutex_lock(&chip->lock);
 | |
| 		status = sx150x_io_output(chip, offset, val);
 | |
| 		mutex_unlock(&chip->lock);
 | |
| 	}
 | |
| 	return status;
 | |
| }
 | |
| 
 | |
| static int sx150x_gpio_to_irq(struct gpio_chip *gc, unsigned offset)
 | |
| {
 | |
| 	struct sx150x_chip *chip;
 | |
| 
 | |
| 	chip = container_of(gc, struct sx150x_chip, gpio_chip);
 | |
| 
 | |
| 	if (offset >= chip->dev_cfg->ngpios)
 | |
| 		return -EINVAL;
 | |
| 
 | |
| 	if (chip->irq_base < 0)
 | |
| 		return -EINVAL;
 | |
| 
 | |
| 	return chip->irq_base + offset;
 | |
| }
 | |
| 
 | |
| static void sx150x_irq_mask(struct irq_data *d)
 | |
| {
 | |
| 	struct irq_chip *ic = irq_data_get_irq_chip(d);
 | |
| 	struct sx150x_chip *chip;
 | |
| 	unsigned n;
 | |
| 
 | |
| 	chip = container_of(ic, struct sx150x_chip, irq_chip);
 | |
| 	n = d->irq - chip->irq_base;
 | |
| 	chip->irq_masked |= (1 << n);
 | |
| 	chip->irq_update = n;
 | |
| }
 | |
| 
 | |
| static void sx150x_irq_unmask(struct irq_data *d)
 | |
| {
 | |
| 	struct irq_chip *ic = irq_data_get_irq_chip(d);
 | |
| 	struct sx150x_chip *chip;
 | |
| 	unsigned n;
 | |
| 
 | |
| 	chip = container_of(ic, struct sx150x_chip, irq_chip);
 | |
| 	n = d->irq - chip->irq_base;
 | |
| 
 | |
| 	chip->irq_masked &= ~(1 << n);
 | |
| 	chip->irq_update = n;
 | |
| }
 | |
| 
 | |
| static int sx150x_irq_set_type(struct irq_data *d, unsigned int flow_type)
 | |
| {
 | |
| 	struct irq_chip *ic = irq_data_get_irq_chip(d);
 | |
| 	struct sx150x_chip *chip;
 | |
| 	unsigned n, val = 0;
 | |
| 
 | |
| 	if (flow_type & (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW))
 | |
| 		return -EINVAL;
 | |
| 
 | |
| 	chip = container_of(ic, struct sx150x_chip, irq_chip);
 | |
| 	n = d->irq - chip->irq_base;
 | |
| 
 | |
| 	if (flow_type & IRQ_TYPE_EDGE_RISING)
 | |
| 		val |= 0x1;
 | |
| 	if (flow_type & IRQ_TYPE_EDGE_FALLING)
 | |
| 		val |= 0x2;
 | |
| 
 | |
| 	chip->irq_sense &= ~(3UL << (n * 2));
 | |
| 	chip->irq_sense |= val << (n * 2);
 | |
| 	chip->irq_update = n;
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static irqreturn_t sx150x_irq_thread_fn(int irq, void *dev_id)
 | |
| {
 | |
| 	struct sx150x_chip *chip = (struct sx150x_chip *)dev_id;
 | |
| 	unsigned nhandled = 0;
 | |
| 	unsigned sub_irq;
 | |
| 	unsigned n;
 | |
| 	s32 err;
 | |
| 	u8 val;
 | |
| 	int i;
 | |
| 
 | |
| 	for (i = (chip->dev_cfg->ngpios / 8) - 1; i >= 0; --i) {
 | |
| 		err = sx150x_i2c_read(chip->client,
 | |
| 				      chip->dev_cfg->reg_irq_src - i,
 | |
| 				      &val);
 | |
| 		if (err < 0)
 | |
| 			continue;
 | |
| 
 | |
| 		sx150x_i2c_write(chip->client,
 | |
| 				chip->dev_cfg->reg_irq_src - i,
 | |
| 				val);
 | |
| 		for (n = 0; n < 8; ++n) {
 | |
| 			if (val & (1 << n)) {
 | |
| 				sub_irq = chip->irq_base + (i * 8) + n;
 | |
| 				handle_nested_irq(sub_irq);
 | |
| 				++nhandled;
 | |
| 			}
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	return (nhandled > 0 ? IRQ_HANDLED : IRQ_NONE);
 | |
| }
 | |
| 
 | |
| static void sx150x_irq_bus_lock(struct irq_data *d)
 | |
| {
 | |
| 	struct irq_chip *ic = irq_data_get_irq_chip(d);
 | |
| 	struct sx150x_chip *chip;
 | |
| 
 | |
| 	chip = container_of(ic, struct sx150x_chip, irq_chip);
 | |
| 
 | |
| 	mutex_lock(&chip->lock);
 | |
| }
 | |
| 
 | |
| static void sx150x_irq_bus_sync_unlock(struct irq_data *d)
 | |
| {
 | |
| 	struct irq_chip *ic = irq_data_get_irq_chip(d);
 | |
| 	struct sx150x_chip *chip;
 | |
| 	unsigned n;
 | |
| 
 | |
| 	chip = container_of(ic, struct sx150x_chip, irq_chip);
 | |
| 
 | |
| 	if (chip->irq_update == NO_UPDATE_PENDING)
 | |
| 		goto out;
 | |
| 
 | |
| 	n = chip->irq_update;
 | |
| 	chip->irq_update = NO_UPDATE_PENDING;
 | |
| 
 | |
| 	/* Avoid updates if nothing changed */
 | |
| 	if (chip->dev_sense == chip->irq_sense &&
 | |
| 	    chip->dev_sense == chip->irq_masked)
 | |
| 		goto out;
 | |
| 
 | |
| 	chip->dev_sense = chip->irq_sense;
 | |
| 	chip->dev_masked = chip->irq_masked;
 | |
| 
 | |
| 	if (chip->irq_masked & (1 << n)) {
 | |
| 		sx150x_write_cfg(chip, n, 1, chip->dev_cfg->reg_irq_mask, 1);
 | |
| 		sx150x_write_cfg(chip, n, 2, chip->dev_cfg->reg_sense, 0);
 | |
| 	} else {
 | |
| 		sx150x_write_cfg(chip, n, 1, chip->dev_cfg->reg_irq_mask, 0);
 | |
| 		sx150x_write_cfg(chip, n, 2, chip->dev_cfg->reg_sense,
 | |
| 				 chip->irq_sense >> (n * 2));
 | |
| 	}
 | |
| out:
 | |
| 	mutex_unlock(&chip->lock);
 | |
| }
 | |
| 
 | |
| static void sx150x_init_chip(struct sx150x_chip *chip,
 | |
| 			struct i2c_client *client,
 | |
| 			kernel_ulong_t driver_data,
 | |
| 			struct sx150x_platform_data *pdata)
 | |
| {
 | |
| 	mutex_init(&chip->lock);
 | |
| 
 | |
| 	chip->client                     = client;
 | |
| 	chip->dev_cfg                    = &sx150x_devices[driver_data];
 | |
| 	chip->gpio_chip.label            = client->name;
 | |
| 	chip->gpio_chip.direction_input  = sx150x_gpio_direction_input;
 | |
| 	chip->gpio_chip.direction_output = sx150x_gpio_direction_output;
 | |
| 	chip->gpio_chip.get              = sx150x_gpio_get;
 | |
| 	chip->gpio_chip.set              = sx150x_gpio_set;
 | |
| 	chip->gpio_chip.to_irq           = sx150x_gpio_to_irq;
 | |
| 	chip->gpio_chip.base             = pdata->gpio_base;
 | |
| 	chip->gpio_chip.can_sleep        = 1;
 | |
| 	chip->gpio_chip.ngpio            = chip->dev_cfg->ngpios;
 | |
| 	if (pdata->oscio_is_gpo)
 | |
| 		++chip->gpio_chip.ngpio;
 | |
| 
 | |
| 	chip->irq_chip.name                = client->name;
 | |
| 	chip->irq_chip.irq_mask            = sx150x_irq_mask;
 | |
| 	chip->irq_chip.irq_unmask          = sx150x_irq_unmask;
 | |
| 	chip->irq_chip.irq_set_type        = sx150x_irq_set_type;
 | |
| 	chip->irq_chip.irq_bus_lock        = sx150x_irq_bus_lock;
 | |
| 	chip->irq_chip.irq_bus_sync_unlock = sx150x_irq_bus_sync_unlock;
 | |
| 	chip->irq_summary                  = -1;
 | |
| 	chip->irq_base                     = -1;
 | |
| 	chip->irq_masked                   = ~0;
 | |
| 	chip->irq_sense                    = 0;
 | |
| 	chip->dev_masked                   = ~0;
 | |
| 	chip->dev_sense                    = 0;
 | |
| 	chip->irq_update		   = NO_UPDATE_PENDING;
 | |
| }
 | |
| 
 | |
| static int sx150x_init_io(struct sx150x_chip *chip, u8 base, u16 cfg)
 | |
| {
 | |
| 	int err = 0;
 | |
| 	unsigned n;
 | |
| 
 | |
| 	for (n = 0; err >= 0 && n < (chip->dev_cfg->ngpios / 8); ++n)
 | |
| 		err = sx150x_i2c_write(chip->client, base - n, cfg >> (n * 8));
 | |
| 	return err;
 | |
| }
 | |
| 
 | |
| static int sx150x_reset(struct sx150x_chip *chip)
 | |
| {
 | |
| 	int err;
 | |
| 
 | |
| 	err = i2c_smbus_write_byte_data(chip->client,
 | |
| 					chip->dev_cfg->reg_reset,
 | |
| 					0x12);
 | |
| 	if (err < 0)
 | |
| 		return err;
 | |
| 
 | |
| 	err = i2c_smbus_write_byte_data(chip->client,
 | |
| 					chip->dev_cfg->reg_reset,
 | |
| 					0x34);
 | |
| 	return err;
 | |
| }
 | |
| 
 | |
| static int sx150x_init_hw(struct sx150x_chip *chip,
 | |
| 			struct sx150x_platform_data *pdata)
 | |
| {
 | |
| 	int err = 0;
 | |
| 
 | |
| 	if (pdata->reset_during_probe) {
 | |
| 		err = sx150x_reset(chip);
 | |
| 		if (err < 0)
 | |
| 			return err;
 | |
| 	}
 | |
| 
 | |
| 	err = sx150x_i2c_write(chip->client,
 | |
| 			chip->dev_cfg->reg_misc,
 | |
| 			0x01);
 | |
| 	if (err < 0)
 | |
| 		return err;
 | |
| 
 | |
| 	err = sx150x_init_io(chip, chip->dev_cfg->reg_pullup,
 | |
| 			pdata->io_pullup_ena);
 | |
| 	if (err < 0)
 | |
| 		return err;
 | |
| 
 | |
| 	err = sx150x_init_io(chip, chip->dev_cfg->reg_pulldn,
 | |
| 			pdata->io_pulldn_ena);
 | |
| 	if (err < 0)
 | |
| 		return err;
 | |
| 
 | |
| 	err = sx150x_init_io(chip, chip->dev_cfg->reg_drain,
 | |
| 			pdata->io_open_drain_ena);
 | |
| 	if (err < 0)
 | |
| 		return err;
 | |
| 
 | |
| 	err = sx150x_init_io(chip, chip->dev_cfg->reg_polarity,
 | |
| 			pdata->io_polarity);
 | |
| 	if (err < 0)
 | |
| 		return err;
 | |
| 
 | |
| 	if (pdata->oscio_is_gpo)
 | |
| 		sx150x_set_oscio(chip, 0);
 | |
| 
 | |
| 	return err;
 | |
| }
 | |
| 
 | |
| static int sx150x_install_irq_chip(struct sx150x_chip *chip,
 | |
| 				int irq_summary,
 | |
| 				int irq_base)
 | |
| {
 | |
| 	int err;
 | |
| 	unsigned n;
 | |
| 	unsigned irq;
 | |
| 
 | |
| 	chip->irq_summary = irq_summary;
 | |
| 	chip->irq_base    = irq_base;
 | |
| 
 | |
| 	for (n = 0; n < chip->dev_cfg->ngpios; ++n) {
 | |
| 		irq = irq_base + n;
 | |
| 		irq_set_chip_and_handler(irq, &chip->irq_chip, handle_edge_irq);
 | |
| 		irq_set_nested_thread(irq, 1);
 | |
| #ifdef CONFIG_ARM
 | |
| 		set_irq_flags(irq, IRQF_VALID);
 | |
| #else
 | |
| 		irq_set_noprobe(irq);
 | |
| #endif
 | |
| 	}
 | |
| 
 | |
| 	err = request_threaded_irq(irq_summary,
 | |
| 				NULL,
 | |
| 				sx150x_irq_thread_fn,
 | |
| 				IRQF_SHARED | IRQF_TRIGGER_FALLING,
 | |
| 				chip->irq_chip.name,
 | |
| 				chip);
 | |
| 	if (err < 0) {
 | |
| 		chip->irq_summary = -1;
 | |
| 		chip->irq_base    = -1;
 | |
| 	}
 | |
| 
 | |
| 	return err;
 | |
| }
 | |
| 
 | |
| static void sx150x_remove_irq_chip(struct sx150x_chip *chip)
 | |
| {
 | |
| 	unsigned n;
 | |
| 	unsigned irq;
 | |
| 
 | |
| 	free_irq(chip->irq_summary, chip);
 | |
| 
 | |
| 	for (n = 0; n < chip->dev_cfg->ngpios; ++n) {
 | |
| 		irq = chip->irq_base + n;
 | |
| 		irq_set_chip_and_handler(irq, NULL, NULL);
 | |
| 	}
 | |
| }
 | |
| 
 | |
| static int __devinit sx150x_probe(struct i2c_client *client,
 | |
| 				const struct i2c_device_id *id)
 | |
| {
 | |
| 	static const u32 i2c_funcs = I2C_FUNC_SMBUS_BYTE_DATA |
 | |
| 				     I2C_FUNC_SMBUS_WRITE_WORD_DATA;
 | |
| 	struct sx150x_platform_data *pdata;
 | |
| 	struct sx150x_chip *chip;
 | |
| 	int rc;
 | |
| 
 | |
| 	pdata = client->dev.platform_data;
 | |
| 	if (!pdata)
 | |
| 		return -EINVAL;
 | |
| 
 | |
| 	if (!i2c_check_functionality(client->adapter, i2c_funcs))
 | |
| 		return -ENOSYS;
 | |
| 
 | |
| 	chip = kzalloc(sizeof(struct sx150x_chip), GFP_KERNEL);
 | |
| 	if (!chip)
 | |
| 		return -ENOMEM;
 | |
| 
 | |
| 	sx150x_init_chip(chip, client, id->driver_data, pdata);
 | |
| 	rc = sx150x_init_hw(chip, pdata);
 | |
| 	if (rc < 0)
 | |
| 		goto probe_fail_pre_gpiochip_add;
 | |
| 
 | |
| 	rc = gpiochip_add(&chip->gpio_chip);
 | |
| 	if (rc < 0)
 | |
| 		goto probe_fail_pre_gpiochip_add;
 | |
| 
 | |
| 	if (pdata->irq_summary >= 0) {
 | |
| 		rc = sx150x_install_irq_chip(chip,
 | |
| 					pdata->irq_summary,
 | |
| 					pdata->irq_base);
 | |
| 		if (rc < 0)
 | |
| 			goto probe_fail_post_gpiochip_add;
 | |
| 	}
 | |
| 
 | |
| 	i2c_set_clientdata(client, chip);
 | |
| 
 | |
| 	return 0;
 | |
| probe_fail_post_gpiochip_add:
 | |
| 	WARN_ON(gpiochip_remove(&chip->gpio_chip) < 0);
 | |
| probe_fail_pre_gpiochip_add:
 | |
| 	kfree(chip);
 | |
| 	return rc;
 | |
| }
 | |
| 
 | |
| static int __devexit sx150x_remove(struct i2c_client *client)
 | |
| {
 | |
| 	struct sx150x_chip *chip;
 | |
| 	int rc;
 | |
| 
 | |
| 	chip = i2c_get_clientdata(client);
 | |
| 	rc = gpiochip_remove(&chip->gpio_chip);
 | |
| 	if (rc < 0)
 | |
| 		return rc;
 | |
| 
 | |
| 	if (chip->irq_summary >= 0)
 | |
| 		sx150x_remove_irq_chip(chip);
 | |
| 
 | |
| 	kfree(chip);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static struct i2c_driver sx150x_driver = {
 | |
| 	.driver = {
 | |
| 		.name = "sx150x",
 | |
| 		.owner = THIS_MODULE
 | |
| 	},
 | |
| 	.probe    = sx150x_probe,
 | |
| 	.remove   = __devexit_p(sx150x_remove),
 | |
| 	.id_table = sx150x_id,
 | |
| };
 | |
| 
 | |
| static int __init sx150x_init(void)
 | |
| {
 | |
| 	return i2c_add_driver(&sx150x_driver);
 | |
| }
 | |
| subsys_initcall(sx150x_init);
 | |
| 
 | |
| static void __exit sx150x_exit(void)
 | |
| {
 | |
| 	return i2c_del_driver(&sx150x_driver);
 | |
| }
 | |
| module_exit(sx150x_exit);
 | |
| 
 | |
| MODULE_AUTHOR("Gregory Bean <gbean@codeaurora.org>");
 | |
| MODULE_DESCRIPTION("Driver for Semtech SX150X I2C GPIO Expanders");
 | |
| MODULE_LICENSE("GPL v2");
 | |
| MODULE_ALIAS("i2c:sx150x");
 |