fac26ad4f9
ICSWX is also used by the A2 processor to access coprocessors, although not all "chips" that contain A2s have coprocessors. Signed-off-by: Jimi Xenidis <jimix@pobox.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
120 lines
3.1 KiB
ArmAsm
120 lines
3.1 KiB
ArmAsm
/*
|
|
* A2 specific assembly support code
|
|
*
|
|
* Copyright 2009 Ben Herrenschmidt, IBM Corp.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* as published by the Free Software Foundation; either version
|
|
* 2 of the License, or (at your option) any later version.
|
|
*/
|
|
|
|
#include <asm/asm-offsets.h>
|
|
#include <asm/ppc_asm.h>
|
|
#include <asm/ppc-opcode.h>
|
|
#include <asm/processor.h>
|
|
#include <asm/reg_a2.h>
|
|
#include <asm/reg.h>
|
|
#include <asm/thread_info.h>
|
|
|
|
/*
|
|
* Disable thdid and class fields in ERATs to bump PID to full 14 bits capacity.
|
|
* This also prevents external LPID accesses but that isn't a problem when not a
|
|
* guest. Under PV, this setting will be ignored and MMUCR will return the right
|
|
* number of PID bits we can use.
|
|
*/
|
|
#define MMUCR1_EXTEND_PID \
|
|
(MMUCR1_ICTID | MMUCR1_ITTID | MMUCR1_DCTID | \
|
|
MMUCR1_DTTID | MMUCR1_DCCD)
|
|
|
|
/*
|
|
* Use extended PIDs if enabled.
|
|
* Don't clear the ERATs on context sync events and enable I & D LRU.
|
|
* Enable ERAT back invalidate when tlbwe overwrites an entry.
|
|
*/
|
|
#define INITIAL_MMUCR1 \
|
|
(MMUCR1_EXTEND_PID | MMUCR1_CSINV_NEVER | MMUCR1_IRRE | \
|
|
MMUCR1_DRRE | MMUCR1_TLBWE_BINV)
|
|
|
|
_GLOBAL(__setup_cpu_a2)
|
|
/* Some of these are actually thread local and some are
|
|
* core local but doing it always won't hurt
|
|
*/
|
|
|
|
#ifdef CONFIG_PPC_ICSWX
|
|
/* Make sure ACOP starts out as zero */
|
|
li r3,0
|
|
mtspr SPRN_ACOP,r3
|
|
|
|
/* Skip the following if we are in Guest mode */
|
|
mfmsr r3
|
|
andis. r0,r3,MSR_GS@h
|
|
bne _icswx_skip_guest
|
|
|
|
/* Enable icswx instruction */
|
|
mfspr r3,SPRN_A2_CCR2
|
|
ori r3,r3,A2_CCR2_ENABLE_ICSWX
|
|
mtspr SPRN_A2_CCR2,r3
|
|
|
|
/* Unmask all CTs in HACOP */
|
|
li r3,-1
|
|
mtspr SPRN_HACOP,r3
|
|
_icswx_skip_guest:
|
|
#endif /* CONFIG_PPC_ICSWX */
|
|
|
|
/* Enable doorbell */
|
|
mfspr r3,SPRN_A2_CCR2
|
|
oris r3,r3,A2_CCR2_ENABLE_PC@h
|
|
mtspr SPRN_A2_CCR2,r3
|
|
isync
|
|
|
|
/* Setup CCR0 to disable power saving for now as it's busted
|
|
* in the current implementations. Setup CCR1 to wake on
|
|
* interrupts normally (we write the default value but who
|
|
* knows what FW may have clobbered...)
|
|
*/
|
|
li r3,0
|
|
mtspr SPRN_A2_CCR0, r3
|
|
LOAD_REG_IMMEDIATE(r3,0x0f0f0f0f)
|
|
mtspr SPRN_A2_CCR1, r3
|
|
|
|
/* Initialise MMUCR1 */
|
|
lis r3,INITIAL_MMUCR1@h
|
|
ori r3,r3,INITIAL_MMUCR1@l
|
|
mtspr SPRN_MMUCR1,r3
|
|
|
|
/* Set MMUCR2 to enable 4K, 64K, 1M, 16M and 1G pages */
|
|
LOAD_REG_IMMEDIATE(r3, 0x000a7531)
|
|
mtspr SPRN_MMUCR2,r3
|
|
|
|
/* Set MMUCR3 to write all thids bit to the TLB */
|
|
LOAD_REG_IMMEDIATE(r3, 0x0000000f)
|
|
mtspr SPRN_MMUCR3,r3
|
|
|
|
/* Don't do ERAT stuff if running guest mode */
|
|
mfmsr r3
|
|
andis. r0,r3,MSR_GS@h
|
|
bne 1f
|
|
|
|
/* Now set the I-ERAT watermark to 15 */
|
|
lis r4,(MMUCR0_TLBSEL_I|MMUCR0_ECL)@h
|
|
mtspr SPRN_MMUCR0, r4
|
|
li r4,A2_IERAT_SIZE-1
|
|
PPC_ERATWE(r4,r4,3)
|
|
|
|
/* Now set the D-ERAT watermark to 31 */
|
|
lis r4,(MMUCR0_TLBSEL_D|MMUCR0_ECL)@h
|
|
mtspr SPRN_MMUCR0, r4
|
|
li r4,A2_DERAT_SIZE-1
|
|
PPC_ERATWE(r4,r4,3)
|
|
|
|
/* And invalidate the beast just in case. That won't get rid of
|
|
* a bolted entry though it will be in LRU and so will go away eventually
|
|
* but let's not bother for now
|
|
*/
|
|
PPC_ERATILX(0,0,0)
|
|
1:
|
|
blr
|
|
|
|
_GLOBAL(__restore_cpu_a2)
|
|
b __setup_cpu_a2
|