Wire up the ADS7846 touchscreen controller on the DB1100. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2879/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
		
			
				
	
	
		
			565 lines
		
	
	
	
		
			14 KiB
			
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			565 lines
		
	
	
	
		
			14 KiB
			
		
	
	
	
		
			C
		
	
	
	
	
	
/*
 | 
						|
 * DBAu1000/1500/1100 board support
 | 
						|
 *
 | 
						|
 * Copyright 2000, 2008 MontaVista Software Inc.
 | 
						|
 * Author: MontaVista Software, Inc. <source@mvista.com>
 | 
						|
 *
 | 
						|
 * This program is free software; you can redistribute it and/or modify
 | 
						|
 * it under the terms of the GNU General Public License as published by
 | 
						|
 * the Free Software Foundation; either version 2 of the License, or
 | 
						|
 * (at your option) any later version.
 | 
						|
 *
 | 
						|
 * This program is distributed in the hope that it will be useful,
 | 
						|
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 | 
						|
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 | 
						|
 * GNU General Public License for more details.
 | 
						|
 *
 | 
						|
 * You should have received a copy of the GNU General Public License
 | 
						|
 * along with this program; if not, write to the Free Software
 | 
						|
 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
 | 
						|
 */
 | 
						|
 | 
						|
#include <linux/dma-mapping.h>
 | 
						|
#include <linux/gpio.h>
 | 
						|
#include <linux/init.h>
 | 
						|
#include <linux/interrupt.h>
 | 
						|
#include <linux/leds.h>
 | 
						|
#include <linux/mmc/host.h>
 | 
						|
#include <linux/module.h>
 | 
						|
#include <linux/platform_device.h>
 | 
						|
#include <linux/pm.h>
 | 
						|
#include <linux/spi/spi.h>
 | 
						|
#include <linux/spi/spi_gpio.h>
 | 
						|
#include <linux/spi/ads7846.h>
 | 
						|
#include <asm/mach-au1x00/au1000.h>
 | 
						|
#include <asm/mach-au1x00/au1000_dma.h>
 | 
						|
#include <asm/mach-au1x00/au1100_mmc.h>
 | 
						|
#include <asm/mach-db1x00/bcsr.h>
 | 
						|
#include <asm/reboot.h>
 | 
						|
#include <prom.h>
 | 
						|
#include "platform.h"
 | 
						|
 | 
						|
#define F_SWAPPED (bcsr_read(BCSR_STATUS) & BCSR_STATUS_DB1000_SWAPBOOT)
 | 
						|
 | 
						|
struct pci_dev;
 | 
						|
 | 
						|
static const char *board_type_str(void)
 | 
						|
{
 | 
						|
	switch (BCSR_WHOAMI_BOARD(bcsr_read(BCSR_WHOAMI))) {
 | 
						|
	case BCSR_WHOAMI_DB1000:
 | 
						|
		return "DB1000";
 | 
						|
	case BCSR_WHOAMI_DB1500:
 | 
						|
		return "DB1500";
 | 
						|
	case BCSR_WHOAMI_DB1100:
 | 
						|
		return "DB1100";
 | 
						|
	default:
 | 
						|
		return "(unknown)";
 | 
						|
	}
 | 
						|
}
 | 
						|
 | 
						|
const char *get_system_type(void)
 | 
						|
{
 | 
						|
	return board_type_str();
 | 
						|
}
 | 
						|
 | 
						|
void __init board_setup(void)
 | 
						|
{
 | 
						|
	/* initialize board register space */
 | 
						|
	bcsr_init(DB1000_BCSR_PHYS_ADDR,
 | 
						|
		  DB1000_BCSR_PHYS_ADDR + DB1000_BCSR_HEXLED_OFS);
 | 
						|
 | 
						|
	printk(KERN_INFO "AMD Alchemy %s Board\n", board_type_str());
 | 
						|
}
 | 
						|
 | 
						|
 | 
						|
static int db1500_map_pci_irq(const struct pci_dev *d, u8 slot, u8 pin)
 | 
						|
{
 | 
						|
	if ((slot < 12) || (slot > 13) || pin == 0)
 | 
						|
		return -1;
 | 
						|
	if (slot == 12)
 | 
						|
		return (pin == 1) ? AU1500_PCI_INTA : 0xff;
 | 
						|
	if (slot == 13) {
 | 
						|
		switch (pin) {
 | 
						|
		case 1: return AU1500_PCI_INTA;
 | 
						|
		case 2: return AU1500_PCI_INTB;
 | 
						|
		case 3: return AU1500_PCI_INTC;
 | 
						|
		case 4: return AU1500_PCI_INTD;
 | 
						|
		}
 | 
						|
	}
 | 
						|
	return -1;
 | 
						|
}
 | 
						|
 | 
						|
static struct resource alchemy_pci_host_res[] = {
 | 
						|
	[0] = {
 | 
						|
		.start	= AU1500_PCI_PHYS_ADDR,
 | 
						|
		.end	= AU1500_PCI_PHYS_ADDR + 0xfff,
 | 
						|
		.flags	= IORESOURCE_MEM,
 | 
						|
	},
 | 
						|
};
 | 
						|
 | 
						|
static struct alchemy_pci_platdata db1500_pci_pd = {
 | 
						|
	.board_map_irq	= db1500_map_pci_irq,
 | 
						|
};
 | 
						|
 | 
						|
static struct platform_device db1500_pci_host_dev = {
 | 
						|
	.dev.platform_data = &db1500_pci_pd,
 | 
						|
	.name		= "alchemy-pci",
 | 
						|
	.id		= 0,
 | 
						|
	.num_resources	= ARRAY_SIZE(alchemy_pci_host_res),
 | 
						|
	.resource	= alchemy_pci_host_res,
 | 
						|
};
 | 
						|
 | 
						|
static int __init db1500_pci_init(void)
 | 
						|
{
 | 
						|
	if (BCSR_WHOAMI_BOARD(bcsr_read(BCSR_WHOAMI)) == BCSR_WHOAMI_DB1500)
 | 
						|
		return platform_device_register(&db1500_pci_host_dev);
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
/* must be arch_initcall; MIPS PCI scans busses in a subsys_initcall */
 | 
						|
arch_initcall(db1500_pci_init);
 | 
						|
 | 
						|
 | 
						|
static struct resource au1100_lcd_resources[] = {
 | 
						|
	[0] = {
 | 
						|
		.start	= AU1100_LCD_PHYS_ADDR,
 | 
						|
		.end	= AU1100_LCD_PHYS_ADDR + 0x800 - 1,
 | 
						|
		.flags	= IORESOURCE_MEM,
 | 
						|
	},
 | 
						|
	[1] = {
 | 
						|
		.start	= AU1100_LCD_INT,
 | 
						|
		.end	= AU1100_LCD_INT,
 | 
						|
		.flags	= IORESOURCE_IRQ,
 | 
						|
	}
 | 
						|
};
 | 
						|
 | 
						|
static u64 au1100_lcd_dmamask = DMA_BIT_MASK(32);
 | 
						|
 | 
						|
static struct platform_device au1100_lcd_device = {
 | 
						|
	.name		= "au1100-lcd",
 | 
						|
	.id		= 0,
 | 
						|
	.dev = {
 | 
						|
		.dma_mask		= &au1100_lcd_dmamask,
 | 
						|
		.coherent_dma_mask	= DMA_BIT_MASK(32),
 | 
						|
	},
 | 
						|
	.num_resources	= ARRAY_SIZE(au1100_lcd_resources),
 | 
						|
	.resource	= au1100_lcd_resources,
 | 
						|
};
 | 
						|
 | 
						|
static struct resource alchemy_ac97c_res[] = {
 | 
						|
	[0] = {
 | 
						|
		.start	= AU1000_AC97_PHYS_ADDR,
 | 
						|
		.end	= AU1000_AC97_PHYS_ADDR + 0xfff,
 | 
						|
		.flags	= IORESOURCE_MEM,
 | 
						|
	},
 | 
						|
	[1] = {
 | 
						|
		.start	= DMA_ID_AC97C_TX,
 | 
						|
		.end	= DMA_ID_AC97C_TX,
 | 
						|
		.flags	= IORESOURCE_DMA,
 | 
						|
	},
 | 
						|
	[2] = {
 | 
						|
		.start	= DMA_ID_AC97C_RX,
 | 
						|
		.end	= DMA_ID_AC97C_RX,
 | 
						|
		.flags	= IORESOURCE_DMA,
 | 
						|
	},
 | 
						|
};
 | 
						|
 | 
						|
static struct platform_device alchemy_ac97c_dev = {
 | 
						|
	.name		= "alchemy-ac97c",
 | 
						|
	.id		= -1,
 | 
						|
	.resource	= alchemy_ac97c_res,
 | 
						|
	.num_resources	= ARRAY_SIZE(alchemy_ac97c_res),
 | 
						|
};
 | 
						|
 | 
						|
static struct platform_device alchemy_ac97c_dma_dev = {
 | 
						|
	.name		= "alchemy-pcm-dma",
 | 
						|
	.id		= 0,
 | 
						|
};
 | 
						|
 | 
						|
static struct platform_device db1x00_codec_dev = {
 | 
						|
	.name		= "ac97-codec",
 | 
						|
	.id		= -1,
 | 
						|
};
 | 
						|
 | 
						|
static struct platform_device db1x00_audio_dev = {
 | 
						|
	.name		= "db1000-audio",
 | 
						|
};
 | 
						|
 | 
						|
/******************************************************************************/
 | 
						|
 | 
						|
static irqreturn_t db1100_mmc_cd(int irq, void *ptr)
 | 
						|
{
 | 
						|
	void (*mmc_cd)(struct mmc_host *, unsigned long);
 | 
						|
	/* link against CONFIG_MMC=m */
 | 
						|
	mmc_cd = symbol_get(mmc_detect_change);
 | 
						|
	mmc_cd(ptr, msecs_to_jiffies(500));
 | 
						|
	symbol_put(mmc_detect_change);
 | 
						|
 | 
						|
	return IRQ_HANDLED;
 | 
						|
}
 | 
						|
 | 
						|
static int db1100_mmc_cd_setup(void *mmc_host, int en)
 | 
						|
{
 | 
						|
	int ret = 0;
 | 
						|
 | 
						|
	if (en) {
 | 
						|
		irq_set_irq_type(AU1100_GPIO19_INT, IRQ_TYPE_EDGE_BOTH);
 | 
						|
		ret = request_irq(AU1100_GPIO19_INT, db1100_mmc_cd, 0,
 | 
						|
				  "sd0_cd", mmc_host);
 | 
						|
	} else
 | 
						|
		free_irq(AU1100_GPIO19_INT, mmc_host);
 | 
						|
	return ret;
 | 
						|
}
 | 
						|
 | 
						|
static int db1100_mmc1_cd_setup(void *mmc_host, int en)
 | 
						|
{
 | 
						|
	int ret = 0;
 | 
						|
 | 
						|
	if (en) {
 | 
						|
		irq_set_irq_type(AU1100_GPIO20_INT, IRQ_TYPE_EDGE_BOTH);
 | 
						|
		ret = request_irq(AU1100_GPIO20_INT, db1100_mmc_cd, 0,
 | 
						|
				  "sd1_cd", mmc_host);
 | 
						|
	} else
 | 
						|
		free_irq(AU1100_GPIO20_INT, mmc_host);
 | 
						|
	return ret;
 | 
						|
}
 | 
						|
 | 
						|
static int db1100_mmc_card_readonly(void *mmc_host)
 | 
						|
{
 | 
						|
	/* testing suggests that this bit is inverted */
 | 
						|
	return (bcsr_read(BCSR_STATUS) & BCSR_STATUS_SD0WP) ? 0 : 1;
 | 
						|
}
 | 
						|
 | 
						|
static int db1100_mmc_card_inserted(void *mmc_host)
 | 
						|
{
 | 
						|
	return !alchemy_gpio_get_value(19);
 | 
						|
}
 | 
						|
 | 
						|
static void db1100_mmc_set_power(void *mmc_host, int state)
 | 
						|
{
 | 
						|
	if (state) {
 | 
						|
		bcsr_mod(BCSR_BOARD, 0, BCSR_BOARD_SD0PWR);
 | 
						|
		msleep(400);	/* stabilization time */
 | 
						|
	} else
 | 
						|
		bcsr_mod(BCSR_BOARD, BCSR_BOARD_SD0PWR, 0);
 | 
						|
}
 | 
						|
 | 
						|
static void db1100_mmcled_set(struct led_classdev *led, enum led_brightness b)
 | 
						|
{
 | 
						|
	if (b != LED_OFF)
 | 
						|
		bcsr_mod(BCSR_LEDS, BCSR_LEDS_LED0, 0);
 | 
						|
	else
 | 
						|
		bcsr_mod(BCSR_LEDS, 0, BCSR_LEDS_LED0);
 | 
						|
}
 | 
						|
 | 
						|
static struct led_classdev db1100_mmc_led = {
 | 
						|
	.brightness_set	= db1100_mmcled_set,
 | 
						|
};
 | 
						|
 | 
						|
static int db1100_mmc1_card_readonly(void *mmc_host)
 | 
						|
{
 | 
						|
	return (bcsr_read(BCSR_BOARD) & BCSR_BOARD_SD1WP) ? 1 : 0;
 | 
						|
}
 | 
						|
 | 
						|
static int db1100_mmc1_card_inserted(void *mmc_host)
 | 
						|
{
 | 
						|
	return !alchemy_gpio_get_value(20);
 | 
						|
}
 | 
						|
 | 
						|
static void db1100_mmc1_set_power(void *mmc_host, int state)
 | 
						|
{
 | 
						|
	if (state) {
 | 
						|
		bcsr_mod(BCSR_BOARD, 0, BCSR_BOARD_SD1PWR);
 | 
						|
		msleep(400);	/* stabilization time */
 | 
						|
	} else
 | 
						|
		bcsr_mod(BCSR_BOARD, BCSR_BOARD_SD1PWR, 0);
 | 
						|
}
 | 
						|
 | 
						|
static void db1100_mmc1led_set(struct led_classdev *led, enum led_brightness b)
 | 
						|
{
 | 
						|
	if (b != LED_OFF)
 | 
						|
		bcsr_mod(BCSR_LEDS, BCSR_LEDS_LED1, 0);
 | 
						|
	else
 | 
						|
		bcsr_mod(BCSR_LEDS, 0, BCSR_LEDS_LED1);
 | 
						|
}
 | 
						|
 | 
						|
static struct led_classdev db1100_mmc1_led = {
 | 
						|
	.brightness_set	= db1100_mmc1led_set,
 | 
						|
};
 | 
						|
 | 
						|
static struct au1xmmc_platform_data db1100_mmc_platdata[2] = {
 | 
						|
	[0] = {
 | 
						|
		.cd_setup	= db1100_mmc_cd_setup,
 | 
						|
		.set_power	= db1100_mmc_set_power,
 | 
						|
		.card_inserted	= db1100_mmc_card_inserted,
 | 
						|
		.card_readonly	= db1100_mmc_card_readonly,
 | 
						|
		.led		= &db1100_mmc_led,
 | 
						|
	},
 | 
						|
	[1] = {
 | 
						|
		.cd_setup	= db1100_mmc1_cd_setup,
 | 
						|
		.set_power	= db1100_mmc1_set_power,
 | 
						|
		.card_inserted	= db1100_mmc1_card_inserted,
 | 
						|
		.card_readonly	= db1100_mmc1_card_readonly,
 | 
						|
		.led		= &db1100_mmc1_led,
 | 
						|
	},
 | 
						|
};
 | 
						|
 | 
						|
static struct resource au1100_mmc0_resources[] = {
 | 
						|
	[0] = {
 | 
						|
		.start	= AU1100_SD0_PHYS_ADDR,
 | 
						|
		.end	= AU1100_SD0_PHYS_ADDR + 0xfff,
 | 
						|
		.flags	= IORESOURCE_MEM,
 | 
						|
	},
 | 
						|
	[1] = {
 | 
						|
		.start	= AU1100_SD_INT,
 | 
						|
		.end	= AU1100_SD_INT,
 | 
						|
		.flags	= IORESOURCE_IRQ,
 | 
						|
	},
 | 
						|
	[2] = {
 | 
						|
		.start	= DMA_ID_SD0_TX,
 | 
						|
		.end	= DMA_ID_SD0_TX,
 | 
						|
		.flags	= IORESOURCE_DMA,
 | 
						|
	},
 | 
						|
	[3] = {
 | 
						|
		.start	= DMA_ID_SD0_RX,
 | 
						|
		.end	= DMA_ID_SD0_RX,
 | 
						|
		.flags	= IORESOURCE_DMA,
 | 
						|
	}
 | 
						|
};
 | 
						|
 | 
						|
static u64 au1xxx_mmc_dmamask =  DMA_BIT_MASK(32);
 | 
						|
 | 
						|
static struct platform_device db1100_mmc0_dev = {
 | 
						|
	.name		= "au1xxx-mmc",
 | 
						|
	.id		= 0,
 | 
						|
	.dev = {
 | 
						|
		.dma_mask		= &au1xxx_mmc_dmamask,
 | 
						|
		.coherent_dma_mask	= DMA_BIT_MASK(32),
 | 
						|
		.platform_data		= &db1100_mmc_platdata[0],
 | 
						|
	},
 | 
						|
	.num_resources	= ARRAY_SIZE(au1100_mmc0_resources),
 | 
						|
	.resource	= au1100_mmc0_resources,
 | 
						|
};
 | 
						|
 | 
						|
static struct resource au1100_mmc1_res[] = {
 | 
						|
	[0] = {
 | 
						|
		.start	= AU1100_SD1_PHYS_ADDR,
 | 
						|
		.end	= AU1100_SD1_PHYS_ADDR + 0xfff,
 | 
						|
		.flags	= IORESOURCE_MEM,
 | 
						|
	},
 | 
						|
	[1] = {
 | 
						|
		.start	= AU1100_SD_INT,
 | 
						|
		.end	= AU1100_SD_INT,
 | 
						|
		.flags	= IORESOURCE_IRQ,
 | 
						|
	},
 | 
						|
	[2] = {
 | 
						|
		.start	= DMA_ID_SD1_TX,
 | 
						|
		.end	= DMA_ID_SD1_TX,
 | 
						|
		.flags	= IORESOURCE_DMA,
 | 
						|
	},
 | 
						|
	[3] = {
 | 
						|
		.start	= DMA_ID_SD1_RX,
 | 
						|
		.end	= DMA_ID_SD1_RX,
 | 
						|
		.flags	= IORESOURCE_DMA,
 | 
						|
	}
 | 
						|
};
 | 
						|
 | 
						|
static struct platform_device db1100_mmc1_dev = {
 | 
						|
	.name		= "au1xxx-mmc",
 | 
						|
	.id		= 1,
 | 
						|
	.dev = {
 | 
						|
		.dma_mask		= &au1xxx_mmc_dmamask,
 | 
						|
		.coherent_dma_mask	= DMA_BIT_MASK(32),
 | 
						|
		.platform_data		= &db1100_mmc_platdata[1],
 | 
						|
	},
 | 
						|
	.num_resources	= ARRAY_SIZE(au1100_mmc1_res),
 | 
						|
	.resource	= au1100_mmc1_res,
 | 
						|
};
 | 
						|
 | 
						|
/******************************************************************************/
 | 
						|
 | 
						|
static void db1000_irda_set_phy_mode(int mode)
 | 
						|
{
 | 
						|
	unsigned short mask = BCSR_RESETS_IRDA_MODE_MASK | BCSR_RESETS_FIR_SEL;
 | 
						|
 | 
						|
	switch (mode) {
 | 
						|
	case AU1000_IRDA_PHY_MODE_OFF:
 | 
						|
		bcsr_mod(BCSR_RESETS, mask, BCSR_RESETS_IRDA_MODE_OFF);
 | 
						|
		break;
 | 
						|
	case AU1000_IRDA_PHY_MODE_SIR:
 | 
						|
		bcsr_mod(BCSR_RESETS, mask, BCSR_RESETS_IRDA_MODE_FULL);
 | 
						|
		break;
 | 
						|
	case AU1000_IRDA_PHY_MODE_FIR:
 | 
						|
		bcsr_mod(BCSR_RESETS, mask, BCSR_RESETS_IRDA_MODE_FULL |
 | 
						|
					    BCSR_RESETS_FIR_SEL);
 | 
						|
		break;
 | 
						|
	}
 | 
						|
}
 | 
						|
 | 
						|
static struct au1k_irda_platform_data db1000_irda_platdata = {
 | 
						|
	.set_phy_mode	= db1000_irda_set_phy_mode,
 | 
						|
};
 | 
						|
 | 
						|
static struct resource au1000_irda_res[] = {
 | 
						|
	[0] = {
 | 
						|
		.start	= AU1000_IRDA_PHYS_ADDR,
 | 
						|
		.end	= AU1000_IRDA_PHYS_ADDR + 0x0fff,
 | 
						|
		.flags	= IORESOURCE_MEM,
 | 
						|
	},
 | 
						|
	[1] = {
 | 
						|
		.start	= AU1000_IRDA_TX_INT,
 | 
						|
		.end	= AU1000_IRDA_TX_INT,
 | 
						|
		.flags	= IORESOURCE_IRQ,
 | 
						|
	},
 | 
						|
	[2] = {
 | 
						|
		.start	= AU1000_IRDA_RX_INT,
 | 
						|
		.end	= AU1000_IRDA_RX_INT,
 | 
						|
		.flags	= IORESOURCE_IRQ,
 | 
						|
	},
 | 
						|
};
 | 
						|
 | 
						|
static struct platform_device db1000_irda_dev = {
 | 
						|
	.name	= "au1000-irda",
 | 
						|
	.id	= -1,
 | 
						|
	.dev	= {
 | 
						|
		.platform_data = &db1000_irda_platdata,
 | 
						|
	},
 | 
						|
	.resource	= au1000_irda_res,
 | 
						|
	.num_resources	= ARRAY_SIZE(au1000_irda_res),
 | 
						|
};
 | 
						|
 | 
						|
/******************************************************************************/
 | 
						|
 | 
						|
static struct ads7846_platform_data db1100_touch_pd = {
 | 
						|
	.model		= 7846,
 | 
						|
	.vref_mv	= 3300,
 | 
						|
	.gpio_pendown	= 21,
 | 
						|
};
 | 
						|
 | 
						|
static struct spi_gpio_platform_data db1100_spictl_pd = {
 | 
						|
	.sck		= 209,
 | 
						|
	.mosi		= 208,
 | 
						|
	.miso		= 207,
 | 
						|
	.num_chipselect = 1,
 | 
						|
};
 | 
						|
 | 
						|
static struct spi_board_info db1100_spi_info[] __initdata = {
 | 
						|
	[0] = {
 | 
						|
		.modalias	 = "ads7846",
 | 
						|
		.max_speed_hz	 = 3250000,
 | 
						|
		.bus_num	 = 0,
 | 
						|
		.chip_select	 = 0,
 | 
						|
		.mode		 = 0,
 | 
						|
		.irq		 = AU1100_GPIO21_INT,
 | 
						|
		.platform_data	 = &db1100_touch_pd,
 | 
						|
		.controller_data = (void *)210,	/* for spi_gpio: CS# GPIO210 */
 | 
						|
	},
 | 
						|
};
 | 
						|
 | 
						|
static struct platform_device db1100_spi_dev = {
 | 
						|
	.name		= "spi_gpio",
 | 
						|
	.id		= 0,
 | 
						|
	.dev		= {
 | 
						|
		.platform_data	= &db1100_spictl_pd,
 | 
						|
	},
 | 
						|
};
 | 
						|
 | 
						|
 | 
						|
static struct platform_device *db1x00_devs[] = {
 | 
						|
	&db1x00_codec_dev,
 | 
						|
	&alchemy_ac97c_dma_dev,
 | 
						|
	&alchemy_ac97c_dev,
 | 
						|
	&db1x00_audio_dev,
 | 
						|
};
 | 
						|
 | 
						|
static struct platform_device *db1000_devs[] = {
 | 
						|
	&db1000_irda_dev,
 | 
						|
};
 | 
						|
 | 
						|
static struct platform_device *db1100_devs[] = {
 | 
						|
	&au1100_lcd_device,
 | 
						|
	&db1100_mmc0_dev,
 | 
						|
	&db1100_mmc1_dev,
 | 
						|
	&db1000_irda_dev,
 | 
						|
	&db1100_spi_dev,
 | 
						|
};
 | 
						|
 | 
						|
static int __init db1000_dev_init(void)
 | 
						|
{
 | 
						|
	int board = BCSR_WHOAMI_BOARD(bcsr_read(BCSR_WHOAMI));
 | 
						|
	int c0, c1, d0, d1, s0, s1;
 | 
						|
	unsigned long pfc;
 | 
						|
 | 
						|
	if (board == BCSR_WHOAMI_DB1500) {
 | 
						|
		c0 = AU1500_GPIO2_INT;
 | 
						|
		c1 = AU1500_GPIO5_INT;
 | 
						|
		d0 = AU1500_GPIO0_INT;
 | 
						|
		d1 = AU1500_GPIO3_INT;
 | 
						|
		s0 = AU1500_GPIO1_INT;
 | 
						|
		s1 = AU1500_GPIO4_INT;
 | 
						|
	} else if (board == BCSR_WHOAMI_DB1100) {
 | 
						|
		c0 = AU1100_GPIO2_INT;
 | 
						|
		c1 = AU1100_GPIO5_INT;
 | 
						|
		d0 = AU1100_GPIO0_INT;
 | 
						|
		d1 = AU1100_GPIO3_INT;
 | 
						|
		s0 = AU1100_GPIO1_INT;
 | 
						|
		s1 = AU1100_GPIO4_INT;
 | 
						|
 | 
						|
		gpio_direction_input(19);	/* sd0 cd# */
 | 
						|
		gpio_direction_input(20);	/* sd1 cd# */
 | 
						|
		gpio_direction_input(21);	/* touch pendown# */
 | 
						|
		gpio_direction_input(207);	/* SPI MISO */
 | 
						|
		gpio_direction_output(208, 0);	/* SPI MOSI */
 | 
						|
		gpio_direction_output(209, 1);	/* SPI SCK */
 | 
						|
		gpio_direction_output(210, 1);	/* SPI CS# */
 | 
						|
 | 
						|
		/* spi_gpio on SSI0 pins */
 | 
						|
		pfc = __raw_readl((void __iomem *)SYS_PINFUNC);
 | 
						|
		pfc |= (1 << 0);	/* SSI0 pins as GPIOs */
 | 
						|
		__raw_writel(pfc, (void __iomem *)SYS_PINFUNC);
 | 
						|
		wmb();
 | 
						|
 | 
						|
		spi_register_board_info(db1100_spi_info,
 | 
						|
					ARRAY_SIZE(db1100_spi_info));
 | 
						|
 | 
						|
		platform_add_devices(db1100_devs, ARRAY_SIZE(db1100_devs));
 | 
						|
	} else if (board == BCSR_WHOAMI_DB1000) {
 | 
						|
		c0 = AU1000_GPIO2_INT;
 | 
						|
		c1 = AU1000_GPIO5_INT;
 | 
						|
		d0 = AU1000_GPIO0_INT;
 | 
						|
		d1 = AU1000_GPIO3_INT;
 | 
						|
		s0 = AU1000_GPIO1_INT;
 | 
						|
		s1 = AU1000_GPIO4_INT;
 | 
						|
		platform_add_devices(db1000_devs, ARRAY_SIZE(db1000_devs));
 | 
						|
	} else
 | 
						|
		return 0; /* unknown board, no further dev setup to do */
 | 
						|
 | 
						|
	irq_set_irq_type(d0, IRQ_TYPE_EDGE_BOTH);
 | 
						|
	irq_set_irq_type(d1, IRQ_TYPE_EDGE_BOTH);
 | 
						|
	irq_set_irq_type(c0, IRQ_TYPE_LEVEL_LOW);
 | 
						|
	irq_set_irq_type(c1, IRQ_TYPE_LEVEL_LOW);
 | 
						|
	irq_set_irq_type(s0, IRQ_TYPE_LEVEL_LOW);
 | 
						|
	irq_set_irq_type(s1, IRQ_TYPE_LEVEL_LOW);
 | 
						|
 | 
						|
	db1x_register_pcmcia_socket(
 | 
						|
		AU1000_PCMCIA_ATTR_PHYS_ADDR,
 | 
						|
		AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1,
 | 
						|
		AU1000_PCMCIA_MEM_PHYS_ADDR,
 | 
						|
		AU1000_PCMCIA_MEM_PHYS_ADDR  + 0x000400000 - 1,
 | 
						|
		AU1000_PCMCIA_IO_PHYS_ADDR,
 | 
						|
		AU1000_PCMCIA_IO_PHYS_ADDR   + 0x000010000 - 1,
 | 
						|
		c0, d0,	/*s0*/0, 0, 0);
 | 
						|
 | 
						|
	db1x_register_pcmcia_socket(
 | 
						|
		AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x004000000,
 | 
						|
		AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x004400000 - 1,
 | 
						|
		AU1000_PCMCIA_MEM_PHYS_ADDR  + 0x004000000,
 | 
						|
		AU1000_PCMCIA_MEM_PHYS_ADDR  + 0x004400000 - 1,
 | 
						|
		AU1000_PCMCIA_IO_PHYS_ADDR   + 0x004000000,
 | 
						|
		AU1000_PCMCIA_IO_PHYS_ADDR   + 0x004010000 - 1,
 | 
						|
		c1, d1,	/*s1*/0, 0, 1);
 | 
						|
 | 
						|
	platform_add_devices(db1x00_devs, ARRAY_SIZE(db1x00_devs));
 | 
						|
	db1x_register_norflash(32 << 20, 4 /* 32bit */, F_SWAPPED);
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
device_initcall(db1000_dev_init);
 |