929473ea05
When running a scp transfer using a USB/Ethernet adapter the following crash happens: $ scp test.tar.gz fabio@192.168.1.100:/home/fabio fabio@192.168.1.100's password: test.tar.gz 0% 0 0.0KB/s --:-- ETA ------------[ cut here ]------------ WARNING: at net/sched/sch_generic.c:255 dev_watchdog+0x2cc/0x2f0() NETDEV WATCHDOG: eth0 (asix): transmit queue 0 timed out Modules linked in: Backtrace: [<80011c94>] (dump_backtrace+0x0/0x10c) from [<804d3a5c>] (dump_stack+0x18/0x1c) r6:000000ff r5:80412388 r4:80685dc0 r3:80696cc0 [<804d3a44>] (dump_stack+0x0/0x1c) from [<80021868>] (warn_slowpath_common+0x54/0x6c) [<80021814>] (warn_slowpath_common+0x0/0x6c) from [<80021924>] (warn_slowpath_fmt+0x38/0x40) ... Setting SDIS (Stream Disable Mode- bit 4 of USBMODE register) fixes the problem. However, in current code CI13XXX_DISABLE_STREAMING flag is only set in udc mode, so allow disabling streaming also in host mode. Tested on a mx6qsabrelite board. Suggested-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Reviewed-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
107 lines
2.4 KiB
C
107 lines
2.4 KiB
C
/*
|
|
* host.c - ChipIdea USB host controller driver
|
|
*
|
|
* Copyright (c) 2012 Intel Corporation
|
|
*
|
|
* Author: Alexander Shishkin
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/io.h>
|
|
#include <linux/usb.h>
|
|
#include <linux/usb/hcd.h>
|
|
#include <linux/usb/chipidea.h>
|
|
|
|
#include "../host/ehci.h"
|
|
|
|
#include "ci.h"
|
|
#include "bits.h"
|
|
#include "host.h"
|
|
|
|
static struct hc_driver __read_mostly ci_ehci_hc_driver;
|
|
|
|
static irqreturn_t host_irq(struct ci13xxx *ci)
|
|
{
|
|
return usb_hcd_irq(ci->irq, ci->hcd);
|
|
}
|
|
|
|
static int host_start(struct ci13xxx *ci)
|
|
{
|
|
struct usb_hcd *hcd;
|
|
struct ehci_hcd *ehci;
|
|
int ret;
|
|
|
|
if (usb_disabled())
|
|
return -ENODEV;
|
|
|
|
hcd = usb_create_hcd(&ci_ehci_hc_driver, ci->dev, dev_name(ci->dev));
|
|
if (!hcd)
|
|
return -ENOMEM;
|
|
|
|
dev_set_drvdata(ci->dev, ci);
|
|
hcd->rsrc_start = ci->hw_bank.phys;
|
|
hcd->rsrc_len = ci->hw_bank.size;
|
|
hcd->regs = ci->hw_bank.abs;
|
|
hcd->has_tt = 1;
|
|
|
|
hcd->power_budget = ci->platdata->power_budget;
|
|
hcd->phy = ci->transceiver;
|
|
|
|
ehci = hcd_to_ehci(hcd);
|
|
ehci->caps = ci->hw_bank.cap;
|
|
ehci->has_hostpc = ci->hw_bank.lpm;
|
|
|
|
ret = usb_add_hcd(hcd, 0, 0);
|
|
if (ret)
|
|
usb_put_hcd(hcd);
|
|
else
|
|
ci->hcd = hcd;
|
|
|
|
if (ci->platdata->flags & CI13XXX_DISABLE_STREAMING)
|
|
hw_write(ci, OP_USBMODE, USBMODE_CI_SDIS, USBMODE_CI_SDIS);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void host_stop(struct ci13xxx *ci)
|
|
{
|
|
struct usb_hcd *hcd = ci->hcd;
|
|
|
|
usb_remove_hcd(hcd);
|
|
usb_put_hcd(hcd);
|
|
}
|
|
|
|
int ci_hdrc_host_init(struct ci13xxx *ci)
|
|
{
|
|
struct ci_role_driver *rdrv;
|
|
|
|
if (!hw_read(ci, CAP_DCCPARAMS, DCCPARAMS_HC))
|
|
return -ENXIO;
|
|
|
|
rdrv = devm_kzalloc(ci->dev, sizeof(struct ci_role_driver), GFP_KERNEL);
|
|
if (!rdrv)
|
|
return -ENOMEM;
|
|
|
|
rdrv->start = host_start;
|
|
rdrv->stop = host_stop;
|
|
rdrv->irq = host_irq;
|
|
rdrv->name = "host";
|
|
ci->roles[CI_ROLE_HOST] = rdrv;
|
|
|
|
ehci_init_driver(&ci_ehci_hc_driver, NULL);
|
|
|
|
return 0;
|
|
}
|