Commit graph

4447 commits

Author SHA1 Message Date
Alan Cox
d96212ed87 [PATCH] libata: add ata_piix notes
Ok lets start with the 'easy' stuff. This includes my research and
summary of chip errata into the new driver so that people can refer to
it when updating ata_piix.

No code changes

Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-12 15:33:28 -05:00
Brian King
1a68de5c08 [SCSI] fix double free of scsi request queue
Current scsi scanning code appears to have a use after free
bug is a LLDD's slave_alloc fails. Remove the redundant
scsi_free_queue.

Signed-off-by: Brian King <brking@us.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-12-12 14:27:05 -06:00
Linus Torvalds
49d7bc6428 Revert revert of "[SCSI] fix usb storage oops"
This reverts commit 1b0997f561, which in
turn reverted 34ea80ec6a (which is thus
re-instated).

Quoth James Bottomley:

  "All it's doing is deferring the device_put() from the
   scsi_put_command() to after the scsi_run_queue(), which doesn't fix
   the sleep while atomic problem of the device release method.  In both
   cases we still get the semaphore in atomic context problem which is
   caused by scsi_reap_target() doing a device_del(), which I assumed
   (wrongly) was valid from atomic context."

who also promised to fix scsi_reap_target().

Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-12-12 11:25:04 -08:00
Jens Axboe
a8c730e85e [SCSI] fix panic when ejecting ieee1394 ipod
The scsi_library routines don't correctly set DMA_NONE when
req->data_len is zero (instead they check the command type first, so
if it's write, we end up with req->data_len == 0 and direction as
DMA_TO_DEVICE which confuses some drivers)

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-12-09 13:50:53 -05:00
Michael Reed
85631672e6 [SCSI] fix OOPS due to clearing eh_action prior to aborting eh command
The eh_action semaphore in scsi_eh_send_command is cleared after a
command timeout.  The command is subsequently aborted and the abort
will try to call scsi_done() on it.  Unfortunately, the scsi_eh_done()
routine unconditinally completes the semaphore (which is now null).
Fix this race by makiong the scsi_eh_done() routine check that the
semaphore is non null before completing it (mirroring the ordinary
command done/timeout logic).

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-12-08 09:13:29 -05:00
Mark Lord
f0353301e6 [SCSI] Fix incorrect pointer in megaraid.c MODE_SENSE emulation
The SCSI megaraid drive goes to great effort to kmap
the scatterlist buffer (if used), but then uses the
wrong pointer when copying to it afterward.

Signed-off-by:  Mark Lord <lkml@rtr.ca>
Acked by: Ju, Seokmann <Seokmann.Ju@engenio.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-12-08 09:08:54 -05:00
Andrew Vasquez
0da69df1e5 [SCSI] qla2xxx: Correct short-WRITE status handling.
Properly check FC_RESID for any non-transfered bytes
regardless of firmware completion status.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-12-07 09:33:17 -05:00
Andrew Vasquez
23443b1d61 [SCSI] qla2xxx: Correct mis-handling of AENs.
A regression in a recent change
33135aa2a5 caused the driver
to mistakenly drop handling of AENs.  Due to the incorrect
handling, ports would not reappear after RSCNs and LIPs.

Drops unused/incorrect compound #define from qla_def.h.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-12-07 09:30:49 -05:00
Dave C Boutcher
bb58596f68 [SCSI] ibmvscsi kexec fix
This makes ibmvscsi work correctly with the recent set of kexec
patches that went in.  This is based on work by Michael Ellerman, who
chased this initially.  He validated that it works during kexec.

Handle kexec correctly in ibmvscsi.   During kexec the adapter
will not get cleaned up correctly, so we may need to reset it
to make it sane again.

Signed-off-by: Dave Boutcher <sleddog@us.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-12-07 09:30:01 -05:00
Jeff Garzik
278efe9509 [libata] irq-pio: fix breakage related to err_mask merge 2005-12-06 05:01:27 -05:00
Jeff Garzik
701db69d66 Merge branch 'upstream' 2005-12-06 04:52:48 -05:00
Albert Lee
fe79e683cc [PATCH] libata: err_mask misc fix
1. ata_pio_complete():
     It seems unnecessary to wait for the clearing of the DRQ bit.
     (Waiting for BSY=0 should be enough.
     ata_ok() also checks the correctness of the status bits later.)

  2. ata_pio_block():
     - added error checking, before transfering data.
     - minor comments fix

Signed-off-by: Albert Lee <albertcc@tw.ibm.com>

============
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-06 04:49:23 -05:00
Albert Lee
d8fe452b3e [PATCH] libata: determine the err_mask directly in atapi_packet_task()
- set qc->err_mask directly when we found the error
  - remove the code to determine err_mask from device status

Signed-off-by: Albert Lee <albertcc@tw.ibm.com>

============
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-06 04:49:23 -05:00
Albert Lee
1c8489840e [PATCH] libata: determine the err_mask when the error is found
- move "qc->err_mask |= AC_ERR_ATA_BUS" to where the error is found
  - add "assert(qc->err_mask)" to ata_pio_error() to make sure qc->err_mask was available when we enter the error state

Signed-off-by: Albert Lee <albertcc@tw.ibm.com>

============
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-06 04:49:23 -05:00
Albert Lee
a22e2eb071 [PATCH] libata: move err_mask to ata_queued_cmd
- remove err_mask from the parameter list of the complete functions
  - move err_mask to ata_queued_cmd
  - initialize qc->err_mask when needed
  - for each function call to ata_qc_complete(), replace the err_mask parameter with qc->err_mask.

Signed-off-by: Albert Lee <albertcc@tw.ibm.com>

===============
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-06 04:49:22 -05:00
Albert Lee
c14b8331ec [PATCH] libata: minor patch before moving err_mask
- add qc to ata_pio_poll()
  - reorder the initialization of qc in ata_pio_complete()

Signed-off-by: Albert Lee <albertcc@tw.ibm.com>

===================
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-06 04:49:22 -05:00
Jeff Garzik
6cf5bcaaf9 Merge branch 'master' 2005-12-06 04:14:25 -05:00
Jeff Garzik
451ec6ab31 Merge branch 'master' 2005-12-06 04:14:13 -05:00
Jeff Garzik
4ef679e6ca Merge branch 'upstream-fixes' 2005-12-03 20:34:14 -05:00
Tejun Heo
9a40525788 [PATCH] libata: fix ata_scsi_pass_thru error handling
This patch makes ata_scsi_pass_thru() properly set result code and
sense data on translation failures.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-03 20:31:16 -05:00
Linus Torvalds
1b0997f561 Revert "[SCSI] fix usb storage oops"
This reverts commit 34ea80ec6a.

It does a put_device() from softirq context, which is bad since it gets
a semaphore for reading.

Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-12-02 15:54:37 -08:00
Linus Torvalds
2741049e66 Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6 2005-12-02 14:32:44 -08:00
Hugh Dickins
4d5cda069b [SCSI] sg: fix a bug in st_map_user_pages failure path
sg's st_map_user_pages is modelled on an earlier version of st's
sgl_map_user_pages, and has the same bug: if get_user_pages got some but
not all of the pages, then those got were released, but the positive res
code returned implied that they were still to be freed.

Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Douglas Gilbert <dougg@torque.net>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-12-02 10:24:22 -06:00
Hugh Dickins
032c09d76c [SCSI] sg and st unmap_user_pages allow PageReserved
2.6.15-rc1 made sg's st_unmap_user_pages and st's sgl_unmap_user_pages
BUG on a PageReserved page.  But that's wrong: they could be unmapping
the ZERO_PAGE, which is marked PG_reserved; and perhaps others (while
get_user_pages is still permitted on VM_PFNMAP areas - that may change).

More change is needed here: sg claims to dirty even pages written from,
and st claims not to dirty even pages read into; and SetPageDirty is not
adequate for this nowadays.  Fixes to those follow in a later patch: for
the moment just fix the 2.6.15 regression.

Signed-off-by: Hugh Dickins <hugh@veritas.com>
Acked-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-12-02 10:24:14 -06:00
Hugh Dickins
6bc733e9f7 [SCSI] st: fix a bug in sgl_map_user_pages failure path
Nick and I had already been looking at drivers/scsi/{sg.c,st.c},
brought there by __put_page in sg.c's peculiar sg_rb_correct4mmap,
which we'd like to remove.  But that's irrelevant to your pain, except...

One extract from the patches I'd like to send Doug and Kai for 2.6.15
or 2.6.16 is this below: since the incomplete get_user_pages path omits
to reset res, but has already released all the pages, it will result in
premature freeing of user pages, and behaviour just like you've seen.

Though I'd have thought incomplete get_user_pages was an exceptional
case, and a bit surprised you'd encounter it.  Perhaps there's some
other premature freeing in the driver, and this instance has nothing
whatever to do with it.

If the problem were easily reproducible, it'd be great if you could
try this patch; but I think you've said it's not :-(

Signed-off-by: Kai Makisara <kai.makisara@kolumbus.fi>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-12-01 16:16:06 -06:00
Matthew Wilcox
8b2f81385a [SCSI] sym2: Disable IU and QAS negotiation
Enabling these features causes problems with some drives, so disable
them until they're debugged

Signed-off-by: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-12-01 15:59:50 -06:00
Mark Haverkamp
8bdf810f89 [SCSI] aacraid: Check scsi_bios_ptabe return code
Received from Mark Salyzyn.

scsi_bios_ptable return value is not being checked in aac_biosparm.

Signed-off-by: Mark Haverkamp <markh@osdl.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-12-01 15:59:44 -06:00
James Bottomley
349cd7cfe6 [SCSI] SPI DV: be more conservative about echo buffer usage
Some SCSI devices apparently get very confused if we try to use the
echo buffer on a non-DT negotiated bus (this mirrors the problems of
using PPR on non-LVD for some devices).  The fix is to be far more
conservative about when we use an echo buffer.  With this patch, we'll
now see what parameters are negotiated by the read only test, and only
look for an echo buffer if DT is negotiated.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-12-01 15:59:43 -06:00
Arjan van de Ven
98ac62defe [PATCH] mark several libata datastructures const
Hi,

the patch below marks several libata (and libata-driver) structures
const so that they end up in the .rodata segment and don't false-share
cachelines with things that get dirtied often.

Signed-off-by: Arjan van de Ven <arjan@infradead.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-01 02:29:35 -05:00
Jeff Garzik
6fc8819896 Merge branch 'master' 2005-12-01 01:59:38 -05:00
Jeff Garzik
fe54ceda4d Merge branch 'master' 2005-12-01 01:59:27 -05:00
Jeff Garzik
6946d28a9f Merge branch 'master' 2005-12-01 01:58:36 -05:00
Jeff Garzik
6c9e5eb522 [libata sata_promise] minor whitespace cleanup 2005-11-30 16:42:55 -05:00
Christoph Hellwig
238f9b063d [PATCH] fix megaraid.c locking
This fixes locking in megaraid.c, namely:

 (1) make sure megaraid_queue release the adapter lock by changing the
     code to have a single return
 (2) remove the errornous scsi_assign_lock call

Testing by Burton Windle.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Burton Windle <bwindle@fint.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-29 13:03:01 -08:00
Jeff Garzik
5f3fdeb624 Merge branch 'upstream' 2005-11-29 03:57:29 -05:00
Jeff Garzik
5e3c2b95dd Merge branch 'upstream' 2005-11-29 03:57:16 -05:00
Jeff Garzik
4fe1eaf6f3 Merge branch 'master' 2005-11-29 03:57:04 -05:00
Jeff Garzik
b71d4da092 Merge branch 'master' 2005-11-29 03:55:47 -05:00
Vasily Averin
dce200670d [SCSI] aic7xxx: reset handler selects a wrong command
To transport scsi reset command to device aic7xxx reset handler looks
at the driver's pending_list and searches any proper command. However
the search condition has been inverted: ahc_match_scb() returns TRUE
if a matched command is found. As a result the reset on required
devices did not turn out well, a correctly working neighbour device
may be surprised by the reset. aic7xxx reset handler reports about the
success, but really the original situation is not corrected yet.

Signed-off-by: Vasily Averin <vvs@sw.ru>

Naturally, there's a corresponding problem in the aic79xx driver, so
I've also added the same fix for that.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-11-28 12:28:26 -06:00
Adrian Bunk
458af5439f [PATCH] drivers/scsi/dpt_i2o.c: fix a NULL pointer dereference
The Coverity checker spotted this obvious NULL pointer dereference.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Acked-by: Mark Salyzyn <mark_salyzyn@adaptec.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-27 20:23:46 -08:00
Matthew Dobson
79e448bf2d [PATCH] Fix a bug in scsi_get_command
scsi_get_command() attempts to write into a structure that may not have
been successfully allocated.  Move this write inside the if statement that
ensures we won't panic the kernel with a NULL pointer dereference.

Signed-off-by: Matthew Dobson <colpatch@us.ibm.com>
Cc: James Bottomley <James.Bottomley@steeleye.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-22 09:13:44 -08:00
Jeff Garzik
656563e32c [libata] Print out SATA speed, if link is up
Make the SATA phy probe messages a bit more informative.

Note this only applies to drivers that use __sata_phy_reset(),
which excludes some drivers.
2005-11-20 03:36:45 -05:00
Jeff Garzik
98a5d024eb Merge branch 'upstream' 2005-11-20 00:41:18 -05:00
Jeff Garzik
8238e747b6 Merge branch 'upstream' 2005-11-20 00:41:08 -05:00
Jeff Garzik
4b317d212c Merge branch 'master' 2005-11-18 19:55:06 -05:00
Linus Torvalds
b286e39207 Merge master.kernel.org:/pub/scm/linux/kernel/git/bart/ide-2.6 2005-11-18 15:58:38 -08:00
Laurent Riffard
4ef3b8f4a5 [PATCH] ide: remove ide_driver_t.owner field
The structure ide_driver_t have a .owner field which is a duplicate
of .gendriver.owner field (.gen_driver is a struct device_driver).

This patch removes ide_driver_t's owner field.

Signed-off-by: Laurent Riffard <laurent.riffard@free.fr>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2005-11-18 22:15:40 +01:00
Jeff Garzik
e2b1be56c5 [libata sata_mv] update copyright, driver version 2005-11-18 14:04:23 -05:00
Tejun Heo
c0ab424238 [PATCH] sil24: make error_intr less verbose
sil24_error_intr logs all error interrupts.  ATAPI devices generates
many harmless errors which can be ignored and all serious ones are
reported via sense data by SCSI layer.  Don't log device errors from
ATAPI devices.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-11-18 13:11:39 -05:00
Tejun Heo
69ad185fa1 [PATCH] sil24: add ATAPI support
This patch implements ATAPI support for sil24 and bumps driver version
to 0.23.

Signed-off-by: Tejun Heo <htejun@gmail.com>

--

Jeff, it has been converted to use ->dev_config as pointed out.
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-11-18 13:11:39 -05:00