Move X86_ELAN (old, AMD based web-boxes) from the subarchitecture
menu to the non-standard-platform section.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Voyager has this ISA quirk (because Voyager has no ISA support):
config ISA
bool "ISA support"
depends on !X86_VOYAGER
There's a ton of x86 hardware that does not support ISA, and because
most ISA drivers cannot auto-detect in a safe way, the convention in
the kernel has always been to not enable ISA drivers if they are not
needed.
Voyager users can do likewise - no need for a Kconfig quirk.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Voyager has this PM/ACPI Kconfig quirk:
menu "Power management and ACPI options"
depends on !X86_VOYAGER
Most of the PM features are auto-detect so they should be safe to run
on just about any hardware. (If not, those instances need fixing.)
In any case, if a kernel is built for Voyager, the power management
options can be disabled.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Voyager has this Kconfig quirk:
config HOTPLUG_CPU
bool "Support for hot-pluggable CPUs"
depends on SMP && HOTPLUG && !X86_VOYAGER
But this exception will be moot once Voyager starts using the
generic x86 code.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
If no MCE code is desired on Voyager hw then the solution
is to turn them off in the .config - and to extend the MCE
code to not initialize on Voyager.
Remove the build-time quirk.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The lapic/ioapic code properly auto-detects and is safe to run on CPUs that
have no local APIC. (or which have their lapic turned off in the hardware)
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Remove this Kconfig quirk:
config PARAVIRT
bool "Enable paravirtualization code"
depends on !X86_VOYAGER
help
Voyager support built into a kernel does not preclude paravirt support.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Voyager has this quirk currently:
config KVM_GUEST
bool "KVM Guest support"
select PARAVIRT
depends on !X86_VOYAGER
Voyager support built into a kernel image does not exclude
KVM paravirt guest support - so remove this quirk.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Voyager has this build-time quirk to exclude KVM_CLOCK:
bool "KVM paravirtualized clock"
select PARAVIRT
select PARAVIRT_CLOCK
depends on !X86_VOYAGER
Voyager support built into a kernel image does not exclude
KVM paravirt clock support - so remove this quirk.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
x86/Voyager has this build-time quirk:
bool "VMI Guest support"
select PARAVIRT
depends on X86_32
depends on !X86_VOYAGER
Since VMI is auto-detected (and Voyager will be auto-detected) there's no
reason for this quirk.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
x86/Voyager had this Kconfig quirk:
config X86_FIND_SMP_CONFIG
def_bool y
depends on X86_MPPARSE || X86_VOYAGER
Which splits off the find_smp_config() callback into a build-time quirk.
Voyager should use the existing x86_quirks.mach_find_smp_config() callback
to introduce SMP-config quirks. NUMAQ-32 and VISWS already use this.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Voyager has this Kconfig quirk:
config X86_BIOS_REBOOT
bool
depends on !X86_VOYAGER
default y
Voyager should use the existing machine_ops.emergency_restart reboot
quirk mechanism instead of a build-time quirk.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Voyager has this Kconfig quirk:
depends on (X86_32 && !X86_VOYAGER) || X86_64
That is unnecessary as HT support is CPUID driven and explicitly
enumerated.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
x86/Voyager can boot on non-zero processors. While that can probably
be fixed by properly remapping the physical CPU IDs, keep boot_cpu_id
for now for easier transition - and expand it to all of x86.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The x86/Voyager subarch used to have this distinction between
'x86 SMP support' and 'Voyager SMP support':
config X86_SMP
bool
depends on SMP && ((X86_32 && !X86_VOYAGER) || X86_64)
This is a pointless distinction - Voyager can (and already does) use
smp_ops to implement various SMP quirks it has - and it can be extended
more to cover all the specialities of Voyager.
So remove this complication in the Kconfig space.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Voyager has this Kconfig quirk for suspend/resume:
config ARCH_SUSPEND_POSSIBLE
def_bool y
depends on !X86_VOYAGER
The proper mechanism to not suspend on a piece of hardware to disable
CONFIG_SUSPEND. Remove the quirk.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Voyager has this hibernation quirk:
config ARCH_HIBERNATION_POSSIBLE
def_bool y
depends on !SMP || !X86_VOYAGER
Hibernation is a generic facility provided on all x86 platforms. If it
is buggy on Voyager then that bug should be fixed - not worked around.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
x86/Voyager has this KGDB quirk:
select HAVE_ARCH_KGDB if !X86_VOYAGER
This is completely pointless - there's nothing in KGDB that cannot work
on Voyager. Remove it.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Voyager and other subarchitectures have this Kconfig quirk:
select HAVE_KVM if ((X86_32 && !X86_VOYAGER && !X86_VISWS && !X86_NUMAQ) || X86_64)
This is unnecessary, as KVM cleanly detects based on CPUID capabilities.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
x86/Voyager has this quirk for SCx200 support:
config SCx200
tristate "NatSemi SCx200 support"
depends on !X86_VOYAGER
Remove it - Voyager users can disable drivers they dont need.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Remove Voyager Kconfig quirk: just like any other hardware platform
users of Voyager systems can configure in the hardware drivers they need.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
x86/Voyager does not build right now and it's unclear whether it will
be cleaned up and ported to the subarch-less 32-bit x86 code - so disable
it for now.
If it's fixed we'll re-enable it - or remove it after some time. There's
a very low number of systems running development kernels on x86/Voyager
currently. (one or two on the whole planet)
Signed-off-by: Ingo Molnar <mingo@elte.hu>
CONFIG_BROKEN has been removed from the upstream kernel years ago,
but X86_VOYAGER still had a stale reference to it - remove it.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Remove the 32-bit subarchitecture support code.
All subarchitectures but Voyager have been converted. Voyager will be
done later or will be removed.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
We are getting rid of subarchitecture support - move the hook files
to asm/. (These are now stale and should be replaced with more explicit
runtime mechanisms - but the transition is simpler this way.)
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Remove remaining bits of the subarchitecture code. Now that all the
special platforms are runtime probed and runtime handled, we can remove
these facilities.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Move all code to arch/x86/kernel/bigsmp_32.c.
With this it ceases to rely on any build-time subarch features.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Move all NUMAQ code into arch/x86/kernel/numaq.c.
With this it ceases to rely on any build-time subarch features.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Move all ES7000 code into arch/x86/kernel/es7000_32.c.
With this it ceases to rely on any build-time subarch features.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The WM8753 driver multiplexes the DAI structures it exposes to the
outside world, leaving them uninitialised until the codec probes. Since
the DAI name is used during the registration and setup process provide a
dummy name.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
1: make "target_kb" only accept and produce a memory size in kilobytes.
2: add a second "target" file which produces output in bytes, and will accept
memparse input (scaled bytes)
This fixes the rather irritating problem that writing the same value
read back into target_kb would end up shrinking the domain by a factor
of 1024, with generally bad results.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Stable Kernel <stable@kernel.org>
Cc: "dan.magenheimer@oracle.com" <dan.magenheimer@oracle.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Resetting the streaming flag on disconnection prevented the URBs to be freed
when streaming was active.
Also, USBs cannot be killed after disconnection (oops in [usbcore] unlink1).
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Trace: (Provided by Douglas)
BUG: sleeping function called from invalid context at drivers/usb/core/urb.c:558
in_atomic():0, irqs_disabled():1
Pid: 4918, comm: sox Not tainted 2.6.27.5 #1
[<c04246d8>] __might_sleep+0xc6/0xcb
[<c058c8b0>] usb_kill_urb+0x1a/0xd8
[<c0488e68>] ? __kmalloc+0x9b/0xfc
[<c0488e85>] ? __kmalloc+0xb8/0xfc
[<c058cd5a>] ? usb_alloc_urb+0xf/0x31
[<f8dd638c>] em28xx_isoc_audio_deinit+0x2f/0x6c [em28xx_alsa]
[<f8dd6573>] em28xx_cmd+0x1aa/0x1c5 [em28xx_alsa]
[<f8dd65e1>] snd_em28xx_capture_trigger+0x53/0x68 [em28xx_alsa]
[<f8aa8674>] snd_pcm_do_start+0x1c/0x23 [snd_pcm]
[<f8aa85d7>] snd_pcm_action_single+0x25/0x4b [snd_pcm]
[<f8aa9833>] snd_pcm_action+0x6a/0x76 [snd_pcm]
[<f8aa98f5>] snd_pcm_start+0x14/0x16 [snd_pcm]
[<f8aae10e>] snd_pcm_lib_read1+0x66/0x273 [snd_pcm]
[<f8aac5a3>] ? snd_pcm_kernel_ioctl+0x46/0x5f [snd_pcm]
[<f8aae4a7>] snd_pcm_lib_read+0xbf/0xcd [snd_pcm]
[<f8aad774>] ? snd_pcm_lib_read_transfer+0x0/0xaf [snd_pcm]
[<f89feeb6>] snd_pcm_oss_read3+0x99/0xdc [snd_pcm_oss]
[<f89fef9c>] snd_pcm_oss_read2+0xa3/0xbf [snd_pcm_oss]
[<c064169d>] ? _cond_resched+0x8/0x32
[<f89ff0be>] snd_pcm_oss_read+0x106/0x150 [snd_pcm_oss]
[<f89fefb8>] ? snd_pcm_oss_read+0x0/0x150 [snd_pcm_oss]
[<c048c6e2>] vfs_read+0x81/0xdc
[<c048c7d6>] sys_read+0x3b/0x60
[<c04039bf>] sysenter_do_call+0x12/0x34
=======================
The culprit in the trace is snd_pcm_action() which invokes a spin lock
which disables pre-emption which disables an IRQ which causes the
__might_sleep() function to fail the irqs_disabled() test. Since
pre-emption is enabled then it is safe to de-allocate the memory if
you first unlink each URB. In this instance you are safe since
pre-emption is disabled. If pre-emption and irqs are not disabled then
call usb_kill_urb(), else call usb_unlink_urb().
Thanks to Douglas for tracking down this bug originally!!!
[dougsland@redhat.com: Fixed codyingstyle]
Signed-off-by: Robert Krakora <rob.krakora@messagenetsystems.com>
Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Move radio->muted and radio->stereo in section where radio mutex is
locked to avoid possible race condition problems or access to memory.
Thanks to David Ellingsworth <david@identd.dyndns.org> for pointing to
this weak place in driver.
Signed-off-by: Alexey Klimov <klimov.linux@gmail.com>
Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
These days TUNER_SET_CONFIG is broadcast to the other i2c devices
and that triggers a fw load on the cx25840. Ignore this command
since cx25840 isn't a tuner and you really do not want to load
the firmware that early.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
First control messages to the stick timeouts very often due to probable
hw bug. Repeat first message few times if it fails as workaround.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Bug causes 2nd FE MPEG TS buffer size to be zero and therefore no picture
when 2nd FE was enabled. Configure correct buffer size also for 2nd FE.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The default case of the switch didn't unlock the mutex.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
kerneloops.org is reporting a lot of these warnings that come due to
vmware not setting up any MTRRs for emulated CPUs:
| Reported 709 times (14696 total reports)
| BIOS bug (often in VMWare) where the MTRR's are set up incorrectly
| or not at all
|
| This warning was last seen in version 2.6.29-rc2-git1, and first
| seen in 2.6.24.
|
| More info:
| http://www.kerneloops.org/searchweek.php?search=mtrr_trim_uncached_memory
Keep a one-liner KERN_INFO about it - so that we have so notice if empty
MTRRs are caused by native hardware/BIOS weirdness.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Revert a change made in change 9743 which resulted in a kernel panic in some
cases on shutdown of the audio stream.
First discovered when working on the Pinnacle 880e support, and later
reproduced by a user on the mailing list with the HVR-900 as well.
Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Fix for KWorld 330U Board
Many thanks to Devin and Mauro!!!
Signed-off-by: Robert Krakora <rob.krakora@messagenetsystems.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
