dlm_posix_get fills out the relevant fields in the file_lock before
returning when there is a lock conflict, but doesn't clean out any of
the other fields in the file_lock.
When nfsd does a NFSv4 lockt call, it sets the fl_lmops to
nfsd_posix_mng_ops before calling the lower fs. When the lock comes back
after testing a lock on GFS2, it still has that field set. This confuses
nfsd into thinking that the file_lock is a nfsd4 lock.
Fix this by making DLM reinitialize the file_lock before copying the
fields from the conflicting lock.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
We should use the original copy of the file_lock, fl, instead
of the copy, flc in the lockd notify callback. The range in flc has
been modified by posix_lock_file(), so it will not match a copy of the
lock in lockd.
Signed-off-by: David Teigland <teigland@redhat.com>
mcs7830_set_reg() and mcs7830_get_reg() are called with buffers
from stack which must not be used directly for USB transfers.
This causes corruption of the stack particulary on non x86
architectures because DMA may be used for these transfers.
Signed-off-by: Christian Eggers <christian.eggers@kathrein.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Improve usbnet's devdbg to always type-check diagnostic arguments,
like dev_dbg (device.h). This makes no change to the resulting size of
usbnet modules.
This patch also removes an #ifdef DEBUG directive from rndis_wlan so
it's devdbg statements are always type-checked at compile time.
Signed-off-by: Steve Glendinning <steve.glendinning@smsc.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Caused by call to request_module() while holding nf_conntrack_lock.
Reported-and-tested-by: Kövesdi György <kgy@teledigit.hu>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Now that bmap support is gone, this is the only way to get extent
mappings for userland. These are still not valid for IO, but they
can tell us if a file has holes or how much fragmentation there is.
Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
Swapfiles use bmap to build a list of extents belonging to the file,
and they assume these extents won't change over the life of the file.
They also use resulting list to do IO directly to the block device.
This causes problems for btrfs in a few ways:
btrfs returns logical block numbers through bmap, and these are not suitable
for IO. They might translate to different devices, raid etc.
COW means that file block mappings are going to change frequently.
Using swapfiles on btrfs will lead to corruption, so we're avoiding the
problem for now by dropping bmap support entirely. A later commit
will add fiemap support for people that really want to know how
a file is laid out.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
To improve performance, btrfs_sync_log merges tree log sync
requests. But it wrongly merges sync requests for different
tree logs. If multiple tree logs are synced at the same time,
only one of them actually gets synced.
This patch has following changes to fix the bug:
Move most tree log related fields in btrfs_fs_info to
btrfs_root. This allows merging sync requests separately
for each tree log.
Don't insert root item into the log root tree immediately
after log tree is allocated. Root item for log tree is
inserted when log tree get synced for the first time. This
allows syncing the log root tree without first syncing all
log trees.
At tree-log sync, btrfs_sync_log first sync the log tree;
then updates corresponding root item in the log root tree;
sync the log root tree; then update the super block.
Signed-off-by: Yan Zheng <zheng.yan@oracle.com>
Beschorner Daniel reported:
> hwinfo problem since 2.6.28, showing this in the oops:
> Corrupted page table at address 7fd04de3ec00
Also, PaX Team reported a regression with this commit:
> commit 9542ada803
> Author: Suresh Siddha <suresh.b.siddha@intel.com>
> Date: Wed Sep 24 08:53:33 2008 -0700
>
> x86: track memtype for RAM in page struct
This commit breaks mapping any RAM page through /dev/mem, as the
reserve_memtype() was not initializing the return attribute type and as such
corrupting the PTE entry that was setup with the return attribute type.
Because of this bug, application mapping this RAM page through /dev/mem
will die with "Corrupted page table at address xxxx" message in the kernel
log and also the kernel identity mapping which maps the underlying RAM
page gets converted to UC.
Fix this by initializing the return attribute type before calling
reserve_ram_pages_type()
Reported-by: PaX Team <pageexec@freemail.hu>
Reported-and-tested-by: Beschorner Daniel <Daniel.Beschorner@facton.com>
Tested-and-Acked-by: PaX Team <pageexec@freemail.hu>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This is a framebuffer driver for i.MX31 SoCs. It only supports synchronous
displays, vertical panning supported, no overlay support.
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
replace_one_extent searches tree leaves for references to a given extent. It
stops searching if it goes beyond the last possible position.
The last possible position is computed by adding the starting offset of a found
file extent to the full size of the extent. The code uses physical size of the
extent as the full size. This is incorrect when compression is used.
The fix is get the full size from ram_bytes field of file extent item.
Signed-off-by: Yan Zheng <zheng.yan@oracle.com>
Change one typedef to a regular enum, and remove an unused one.
Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
btrfs_extent_post_op calls finish_current_insert and del_pending_extents. They
both may enter infinite loops.
finish_current_insert enters infinite loop if it only finds some backrefs to
update. The fix is to check for pending backref updates before restarting the
loop.
The infinite loop in del_pending_extents is due to a the skipped variable
not being properly reset before looping around.
Signed-off-by: Yan Zheng <zheng.yan@oracle.com>
Merge list_for_each* and list_entry to list_for_each_entry*
Signed-off-by: Qinghuang Feng <qhfeng.kernel@gmail.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
kthread_run() returns the kthread or ERR_PTR(-ENOMEM), not NULL.
Signed-off-by: Qinghuang Feng <qhfeng.kernel@gmail.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
The "devid <xxx> transid <xxx>" printk in btrfs_scan_one_device()
actually follows another printk that doesn't end in a newline (since the
intention is for the two printks to make one line of output), so the
KERN_INFO just ends up messing up the output:
device label exp <6>devid 1 transid 9 /dev/sda5
Fix this by changing the extra KERN_INFO to KERN_CONT.
Signed-off-by: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Andrew's review of the xattr code revealed some minor issues that this patch
addresses. Just an error return fix, got rid of a useless statement and
commented one of the trickier parts of __btrfs_getxattr.
Signed-off-by: Josef Bacik <jbacik@redhat.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
- Remove the unused local variable 'len';
- Check return value of kmalloc().
Signed-off-by: Wang Cong <wangcong@zeuux.org>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Since ->acquire_dquot and ->release_dquot callbacks aren't called under
dqptr_sem anymore, we don't have to start a transaction and obtain locks
so early. So we can just remove all this complicated stuff.
Signed-off-by: Jan Kara <jack@suse.cz>
Acked-by: Mark Fasheh <mfasheh@suse.de>
while looking at:
http://bugzilla.kernel.org/show_bug.cgi?id=11541
I realized that the mtrr.show param cannot work, because
the code is processed much too early.
This patch:
- Declares mtrr.show as early_param
- Stays consistent with the previous param (which I doubt
that it ever worked), so mtrr.show=1 would still work
- Declares mtrr_show as initdata
Signed-off-by: Thomas Renninger <trenn@suse.de>
Acked-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: fix sporadic slowdowns and warning messages
This patch fixes a performance issue reported by Linus on his
Nehalem system. While Linus reverted the PAT patch (commit
58dab916df) which exposed the issue,
existing cpa() code can potentially still cause wrong(page attribute
corruption) behavior.
This patch also fixes the "WARNING: at arch/x86/mm/pageattr.c:560" that
various people reported.
In 64bit kernel, kernel identity mapping might have holes depending
on the available memory and how e820 reports the address range
covering the RAM, ACPI, PCI reserved regions. If there is a 2MB/1GB hole
in the address range that is not listed by e820 entries, kernel identity
mapping will have a corresponding hole in its 1-1 identity mapping.
If cpa() happens on the kernel identity mapping which falls into these holes,
existing code fails like this:
__change_page_attr_set_clr()
__change_page_attr()
returns 0 because of if (!kpte). But doesn't
set cpa->numpages and cpa->pfn.
cpa_process_alias()
uses uninitialized cpa->pfn (random value)
which can potentially lead to changing the page
attribute of kernel text/data, kernel identity
mapping of RAM pages etc. oops!
This bug was easily exposed by another PAT patch which was doing
cpa() more often on kernel identity mapping holes (physical range between
max_low_pfn_mapped and 4GB), where in here it was setting the
cache disable attribute(PCD) for kernel identity mappings aswell.
Fix cpa() to handle the kernel identity mapping holes. Retain
the WARN() for cpa() calls to other not present address ranges
(kernel-text/data, ioremap() addresses)
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Cc: <stable@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
When doing large allocations (larger than the per-device coherent area)
the generic memory allocators are silently fallen back on regardless of
consideration for the per-device constraints.
In the DMA_MEMORY_EXCLUSIVE case falling back on generic memory is not
an option, as it tends not to be addressable by the DMA hardware in
question. This issue showed up with the 8139too breakage on the
Dreamcast, where non-addressable buffers were silently allocated due to
the size mismatch calculation -- while it should have simply errored out
upon being unable to satisfy the allocation with the given device
constraints.
This restores fall back behaviour to what it was before the oversized
request change caused multiple regressions.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Commit 58c6d3dfe4 ("dma-coherent: catch
oversized requests to dma_alloc_from_coherent()") attempted to add a
sanity check to bail out on allocations larger than the coherent area.
Unfortunately when this was implemented, the fact the coherent area
is tracked in pages rather than bytes was overlooked, which subsequently
broke every single dma_alloc_from_coherent() user, forcing the allocation
silently through generic memory instead.
Signed-off-by: Adrian McMenamin <adrian@mcmen.demon.co.uk >
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
unaligned and nonexistent address causes wrong exception
handling in traps_32.c(handle_unaligned_access).
'handle_unalinged_ins' should return -EFAULT if address error
is fixed up with kernel exception table, otherwise
'handle_unaligned_access' increases already fixed program counter
and then crash.
for example
ioctl(fd, TCGETA, (struct termio *)-1)
never return and stay in TASK_UNINTERRUPTIBLE state forever
in my kernel.
Signed-off-by: SUGIOKA Toshinobu <sugioka@itonet.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Presently we do not support these interfaces, so make them BUG() wrappers
as per the rest of the vmap interface on nommu. Fixes up the modular xfs
build.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
This patch adds the SCSPTR register to the sh-sci driver in
the case of sh7723 to make sure early printk builds properly.
Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
This patch exports the sh7343 JPU to user space using uio_pdrv_genirq,
very similar to the sh7722 JPU patch by Hayama-san.
While at it fix up the end of the sh7722 JPU iomem resource.
Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
ISA can go away now that the hd6446x PCMCIA drivers no longer exist
in-tree. The rationale for enabling CONFIG_ISA in the first place is
likewise no longer valid given that the subsystem has changed since
the time that assertion was valid.
While we are at it, kill off SBUS, MCA, EISA, and so on. These are
not supported and never will be.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
This patch adds CN9 MMC support for MigoR using the mmc_spi
driver on top of the bitbanging spi_gpio driver.
Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
This reverts commit 4217458daf.
Justin Madru bisected this commit, it was causing weird Firefox
crashes.
The reason is that GCC mis-optimizes (re-uses) the on-stack parameters of
the calling frame, which corrupts the syscall return pt_regs state and
thus corrupts user-space register state.
So we go back to the slightly less clean but more optimization-safe
method of getting to pt_regs. Also add a comment to explain this.
Resolves: http://bugzilla.kernel.org/show_bug.cgi?id=12505
Reported-and-bisected-by: Justin Madru <jdm64@gawab.com>
Tested-by: Justin Madru <jdm64@gawab.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: fix rare (but currently harmless) miscompile with certain configs and gcc versions
Hugh Dickins noticed that strncpy_from_user() was miscompiled
in some circumstances with gcc 4.3.
Thanks to Hugh's excellent analysis it was easy to track down.
Hugh writes:
> Try building an x86_64 defconfig 2.6.29-rc1 kernel tree,
> except not quite defconfig, switch CONFIG_PREEMPT_NONE=y
> and CONFIG_PREEMPT_VOLUNTARY off (because it expands a
> might_fault() there, which hides the issue): using a
> gcc 4.3.2 (I've checked both openSUSE 11.1 and Fedora 10).
>
> It generates the following:
>
> 0000000000000000 <__strncpy_from_user>:
> 0: 48 89 d1 mov %rdx,%rcx
> 3: 48 85 c9 test %rcx,%rcx
> 6: 74 0e je 16 <__strncpy_from_user+0x16>
> 8: ac lods %ds:(%rsi),%al
> 9: aa stos %al,%es:(%rdi)
> a: 84 c0 test %al,%al
> c: 74 05 je 13 <__strncpy_from_user+0x13>
> e: 48 ff c9 dec %rcx
> 11: 75 f5 jne 8 <__strncpy_from_user+0x8>
> 13: 48 29 c9 sub %rcx,%rcx
> 16: 48 89 c8 mov %rcx,%rax
> 19: c3 retq
>
> Observe that "sub %rcx,%rcx; mov %rcx,%rax", whereas gcc 4.2.1
> (and many other configs) say "sub %rcx,%rdx; mov %rdx,%rax".
> Isn't it returning 0 when it ought to be returning strlen?
The asm constraints for the strncpy_from_user() result were missing an
early clobber, which tells gcc that the last output arguments
are written before all input arguments are read.
Also add more early clobbers in the rest of the file and fix 32-bit
usercopy.c in the same way.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
[ since this API is rarely used and no in-kernel user relies on a 'len'
return value (they only rely on negative return values) this miscompile
was never noticed in the field. But it's worth fixing it nevertheless. ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This patch adds CN3 MMC support for ap325rxa using the mmc_spi
driver on top of the bitbanging spi_gpio driver.
Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Since commit ba84be2338
("remove linux/hardirq.h from asm-generic/local.h"), the asm/irq.h
definitions that mach-x3proto/setup.c depends on are no longer available,
causing the build to die. So, include linux/irq.h explicitly.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Migo-R can use ov772x camera driver in Linux 2.6.29.
Therefore, soc_camera_platform setting is no longer needed.
This patch removes it.
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Bring sh in line with all the other ports. Not sure how sh missed this
change as all the other arches were being updated ...
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
If the NULL test is necessary, then the dereference should be moved below
the NULL test.
The semantic patch that makes this change is as follows:
(http://www.emn.fr/x-info/coccinelle/).
// <smpl>
@disable is_null@
identifier f;
expression E;
identifier fld;
statement S;
@@
+ if (E == NULL) S
f(...,E->fld,...);
- if (E == NULL) S
@@
identifier f;
expression E;
identifier fld;
statement S;
@@
+ if (!E) S
f(...,E->fld,...);
- if (!E) S
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
