Currently, Loongson-2 call protected_blast_icache_range() and others
call protected_loongson23_blast_icache_range(), but I think the correct
behavior should be the opposite. BTW, Loongson-3's cache-ops is
compatible with MIPS64, but not compatible with Loongson-2. So, rename
xxx_loongson23_yyy things to xxx_loongson2_yyy.
The patch fixes early boot hang with 3.13-rc1, introduced in commit
14bd8c0820 ("MIPS: Loongson: Get rid of Loongson 2 #ifdefery all over
arch/mips").
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Acked-by: John Crispin <blogic@openwrt.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There is a bug in the function nilfs_segctor_collect, which results in
active data being written to a segment, that is marked as clean. It is
possible, that this segment is selected for a later segment
construction, whereby the old data is overwritten.
The problem shows itself with the following kernel log message:
nilfs_sufile_do_cancel_free: segment 6533 must be clean
Usually a few hours later the file system gets corrupted:
NILFS: bad btree node (blocknr=8748107): level = 0, flags = 0x0, nchildren = 0
NILFS error (device sdc1): nilfs_bmap_last_key: broken bmap (inode number=114660)
The issue can be reproduced with a file system that is nearly full and
with the cleaner running, while some IO intensive task is running.
Although it is quite hard to reproduce.
This is what happens:
1. The cleaner starts the segment construction
2. nilfs_segctor_collect is called
3. sc_stage is on NILFS_ST_SUFILE and segments are freed
4. sc_stage is on NILFS_ST_DAT current segment is full
5. nilfs_segctor_extend_segments is called, which
allocates a new segment
6. The new segment is one of the segments freed in step 3
7. nilfs_sufile_cancel_freev is called and produces an error message
8. Loop around and the collection starts again
9. sc_stage is on NILFS_ST_SUFILE and segments are freed
including the newly allocated segment, which will contain active
data and can be allocated at a later time
10. A few hours later another segment construction allocates the
segment and causes file system corruption
This can be prevented by simply reordering the statements. If
nilfs_sufile_cancel_freev is called before nilfs_segctor_extend_segments
the freed segments are marked as dirty and cannot be allocated any more.
Signed-off-by: Andreas Rohner <andreas.rohner@gmx.net>
Reviewed-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Tested-by: Andreas Rohner <andreas.rohner@gmx.net>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull clock driver fix from Daniel Lezcano:
" * Soren Brinkmann fixed the cadence_ttc driver where a call to
clk_get_rate happens in an interrupt context. More precisely in an IPI
when the broadcast timer is initialized for each cpu in the cpuidle
driver. "
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Add new PCI ID to support new model "Kaveri" family.
Signed-off-by: Philip Pokorny <ppokorny@penguincomputing.com>
Cc: stable@vger.kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add include guard to include/linux/platform_data/sht15.h to prevent
multiple inclusion.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add include guard to include/linux/platform_data/max197.h to prevent
multiple inclusion.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
After a suspend/resume cycle, the NCT6791 is back to its original BIOS
programming. In this state, HWMON IO access may be locked.
Re-enable it during resume.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Commit 436d42c61c ("ARM: samsung: move platform_data definitions")
moved the file to the current location but forgot to remove the pointer
to its previous location. Clean it up. While at it also change the header
file protection macros appropriately.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Some Intel CPUs do not set the 'valid' bit in IA32_THERM_STATUS if the
temperature is too low to be measured. This condition will not change until
the CPU is hot enough for its temperature to be measured. Returning an error
in such conditions is not very useful. Drop checking the valid bit and just
return the reported temperature instead.
Reviewed-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The ADC resolution of the PMIC is 10-bits, this means that the maximum
possible value is 1023 and not the 1024 as originally in the code.
Signed-off-by: Anthony Olech <anthony.olech.opensource@diasemi.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Intel's turbostat code uses only 7 bits from MSR_IA32_TEMPERATURE_TARGET to
read TjMax, and also only accepts it if the reported temperature is at least
85 degrees C. Play safe and do the same.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Since we now have to use PCI IDs to detect CPU types anyway, use this mechanism
to detect CE41x0 CPUs. Advantage is that it only requires a single entry and
covers all variants of CE41x0, including those unknown to us.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Atom S12x0 CPUs are identified by the CPU host bridge ID. Add an override
table based on PCI IDs as well as code to detect it.
PCI access functions can now be called with PCI disabled, so unlike previous
attempts to use PCI IDs, the code no longer depends on it. If PCI is disabled,
the CPU will not be identified correctly. Since it is unlikely that anything
will work in this case, this is an acceptable limitation.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Don't use DEFINE_PCI_DEVICE_TABLE macro, because this macro
is not preferred.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Acked-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Single regression fix for nouveau
* 'drm-nouveau-next' of git://git.freedesktop.org/git/nouveau/linux-2.6:
drm/nouveau: fix null ptr dereferences on some boards
Regression from "device: populate master subdev pointer only when fully
constructed"
Reported-by: Bob Gleitsmann <rjgleits@bellsouth.net>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
vlan gets the same netdev features except vlan filter.
Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Bob Falken reported that after 4G packets, multicast forwarding stopped
working. This was because of a rule reference counter overflow which
freed the rule as soon as the overflow happend.
This patch solves this by adding the FIB_LOOKUP_NOREF flag to
fib_rules_lookup calls. This is safe even from non-rcu locked sections
as in this case the flag only implies not taking a reference to the rule,
which we don't need at all.
Rules only hold references to the namespace, which are guaranteed to be
available during the call of the non-rcu protected function reg_vif_xmit
because of the interface reference which itself holds a reference to
the net namespace.
Fixes: f0ad0860d0 ("ipv4: ipmr: support multiple tables")
Fixes: d1db275dd3 ("ipv6: ip6mr: support multiple tables")
Reported-by: Bob Falken <NetFestivalHaveFun@gmx.com>
Cc: Patrick McHardy <kaber@trash.net>
Cc: Thomas Graf <tgraf@suug.ch>
Cc: Julian Anastasov <ja@ssi.bg>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A number of new dm96xx variants now exist.
Reported-by: Joseph Chang <joseph_chang@davicom.com.tw>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since virtio is an OASIS standard draft now, virtio implementation
discussions are taking place on the virtio-dev OASIS mailing list.
Update MAINTAINERS.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This adds the workaround for erratum 793 as a precaution in case not
every BIOS implements it. This addresses CVE-2013-6885.
Erratum text:
[Revision Guide for AMD Family 16h Models 00h-0Fh Processors,
document 51810 Rev. 3.04 November 2013]
793 Specific Combination of Writes to Write Combined Memory Types and
Locked Instructions May Cause Core Hang
Description
Under a highly specific and detailed set of internal timing
conditions, a locked instruction may trigger a timing sequence whereby
the write to a write combined memory type is not flushed, causing the
locked instruction to stall indefinitely.
Potential Effect on System
Processor core hang.
Suggested Workaround
BIOS should set MSR
C001_1020[15] = 1b.
Fix Planned
No fix planned
[ hpa: updated description, fixed typo in MSR name ]
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: http://lkml.kernel.org/r/20140114230711.GS29865@pd.tnic
Tested-by: Aravind Gopalakrishnan <aravind.gopalakrishnan@amd.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Fix a memory leak in the ieee802154_add_iface() error handling path.
Detected by Coverity: CID 710490.
Signed-off-by: Christian Engelmayer <cengelma@gmx.at>
Signed-off-by: David S. Miller <davem@davemloft.net>
The Samsung dmaengine ASoC driver is used with two different dmaengine drivers.
The pl80x, which properly supports residue reporting and the pl330, which
reports that it does not support residue reporting. So there is no need to
manually set the NO_RESIDUE flag. This has the advantage that a proper (race
condition free) PCM pointer() implementation is used when the pl80x driver is
used. Also once the pl330 driver supports residue reporting the ASoC PCM driver
will automatically start using it.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
The pl330 driver properly reports that it does not have residue reporting
support, which means the PCM dmanegine driver is able to figure this out on its
own. So there is no need to set the flag manually. Removing the flag has the
advantage that once the pl330 driver gains support for residue reporting it will
automatically be used by the generic dmaengine PCM driver.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
The dmaengine framework now exposes the granularity with which it is able to
report the transfer residue for a certain DMA channel. Check the granularity in
the generic dmaengine PCM driver and
a) Set the SNDRV_PCM_INFO_BATCH if the granularity is per period or worse.
b) Fallback to the (race condition prone) period counting if the driver does
not support any residue reporting.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
Currently we have two different snd_soc_platform_driver structs in the generic
dmaengine PCM driver. One for dmaengine drivers that support residue reporting
and one for those which do not. When registering the PCM component we check
whether the NO_RESIDUE flag is set or not and use the corresponding
snd_soc_platform_driver. This patch modifies the driver to only have one
snd_soc_platform_driver struct where the pointer() callback checks the
NO_RESIDUE flag at runtime. This allows us to set the NO_RESIDUE flag after the
PCM component has been registered. This becomes necessary when querying whether
the dmaengine driver supports residue reporting from the dmaengine driver itself
since the DMA channel might only be requested after the PCM component has been
registered.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
The pl330 driver currently does not support residue reporting, so set the
residue granularity to DMA_RESIDUE_GRANULARITY_DESCRIPTOR.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
This patch adds a new field to the dma_slave_caps struct which indicates the
granularity with which the driver is able to update the residue field of the
dma_tx_state struct. Making this information available to dmaengine users allows
them to make better decisions on how to operate. E.g. for audio certain features
like wakeup less operation or timer based scheduling only make sense and work
correctly if the reported residue is fine-grained enough.
Right now four different levels of granularity are supported:
* DESCRIPTOR: The DMA channel is only able to tell whether a descriptor has
been completed or not, which means residue reporting is not supported by
this channel. The residue field of the dma_tx_state field will always be
0.
* SEGMENT: The DMA channel updates the residue field after each successfully
completed segment of the transfer (For cyclic transfers this is after each
period). This is typically implemented by having the hardware generate an
interrupt after each transferred segment and then the drivers updates the
outstanding residue by the size of the segment. Another possibility is if
the hardware supports SG and the segment descriptor has a field which gets
set after the segment has been completed. The driver then counts the
number of segments without the flag set to compute the residue.
* BURST: The DMA channel updates the residue field after each transferred
burst. This is typically only supported if the hardware has a progress
register of some sort (E.g. a register with the current read/write address
or a register with the amount of bursts/beats/bytes that have been
transferred or still need to be transferred).
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
It's a bug that writing to the platform data directly, for it should
be constant. So just copy it before writing.
Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
To be consistent with the equivalent option in 'stat', also, for the
same reason, use -D as the one letter alias.
Suggested-by: Ingo Molnar <mingo@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-p5yjnopajb3a8x0xha7yl5w8@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
That is how the option summary describes it and so that we can free
--delay to replace --initial-delay and then be consistent with stat's
--delay equivalent option.
Suggested-by: Ingo Molnar <mingo@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-f8hd2010uhjl2zzb34hepbmi@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Instead of open-coding the intersecting of two rate masks (and getting slightly
wrong for some of the corner cases) use the new snd_pcm_rate_mask_intersect()
helper function.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
A bit of special care is necessary when creating the intersection of two rate
masks. This comes from the special meaning of the SNDRV_PCM_RATE_CONTINUOUS and
SNDRV_PCM_RATE_KNOT bits, which needs special handling when intersecting two
rate masks. SNDRV_PCM_RATE_CONTINUOUS means the hardware supports all rates in a
specific interval. SNDRV_PCM_RATE_KNOT means the hardware supports a set of
discrete rates specified by a list constraint. For all other cases the supported
rates are specified directly in the rate mask.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
SNDRV_PCM_RATE_CONTINUOUS means that all rates (possibly limited to a certain
interval) are supported. There is no need to manually set other rate bits.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Daniel Glöckner <daniel-gl@gmx.net>
Signed-off-by: Mark Brown <broonie@linaro.org>
SNDRV_PCM_RATE_CONTINUOUS means that all rates (possibly limited to a certain
interval) are supported. There is no need to manually set other rate bits.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
If none of the components (CODEC or CPU DAI) sets a maximum sample rate we'll
end up with the rate_max field of the runtime hardware set to 0. (Note that it
is still possible for the components to constrain the supported sample rates
using other methods, e.g. setting a list constraint) If rate_max is 0 this means
that the sound card doesn't support any rates at all, which is not the desired
result. So initialize rate_max to UINT_MAX. For symmetry reasons also set
rate_min to 0.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
The help text for RANDOMIZE_BASE_MAX_OFFSET was confusing. This has been
clarified, and updated to be an export-only tunable.
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: http://lkml.kernel.org/r/20131210202745.GA2961@www.outflux.net
Acked-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
When the core number exceeds 9, the size of the buffer storing the
alarm attribute name is insufficient and the attribute name is
truncated. This causes libsensors to skip these attributes as the
truncated name is not recognized.
Reported-by: Andreas Hollmann <hollmann@in.tum.de>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: stable@vger.kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
When kernfs_seq_start() fails to obtain an active reference, it
returns ERR_PTR(-ENODEV). kernfs_seq_stop() is then invoked with the
error pointer value; however, it still proceeds to invoke
kernfs_put_active() on the node leading to unbalanced put.
If kernfs_seq_stop() is called even after active ref failure, it
should skip invocation of @ops->seq_stop() and put_active.
Unfortunately, this is a bit complicated because active ref failure
isn't the only thing which may fail with ERR_PTR(-ENODEV).
@ops->seq_start/next() may also fail with the error value and
kernfs_seq_stop() doesn't have a way to tell apart those failures.
Work it around by factoring out the active part of kernfs_seq_stop()
into kernfs_seq_stop_active() and invoking it directly if
@ops->seq_start/next() fail with ERR_PTR(-ENODEV) and updating
kernfs_seq_stop() to skip kernfs_seq_stop_active() on
ERR_PTR(-ENODEV). This is a bit nasty but ensures that the active put
is skipped iff get_active failed in kernfs_seq_start().
tj: This was originally committed as d92d2e6bd7 but got reverted by
683bb2761f along with other kernfs self removal patches.
However, this one is an independent fix and shouldn't have been
reverted together. Reinstate the change. Sorry about the mess.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
. perf record: Add --initial-delay option (Andi Kleen)
. Column colouring improvements in 'diff' (Ramkumar Ramachandra)
Fixes:
. Don't show counter information when workload fails (Arnaldo Carvalho de Melo)
. Fixup leak on error path in parse events test. (Arnaldo Carvalho de Melo)
. Fix --delay option in 'stat' man page (Andi Kleen)
. Use the DWARF unwind info only if loaded (Jean Pihet):
Developer stuff:
. Improve forked workload error reporting by sending the errno in the signal
data queueing integer field, using sigqueue and by doing the signal setup in
the evlist methods, removing open coded equivalents in various tools. (Arnaldo Carvalho de Melo)
. Do more auto exit cleanup shores in the 'evlist' destructor, so that the tools
don't have to all do that sequence. (Arnaldo Carvalho de Melo)
. Pack 'struct perf_session_env' and 'struct trace' (Arnaldo Carvalho de Melo)
. Include tools/lib/api/ in MANIFEST, fixing detached tarballs (Arnaldo Carvalho de Melo)
. Add test for building detached source tarballs (Arnaldo Carvalho de Melo)
. Shut up libtracevent plugins make message (Jiri Olsa)
. Fix installation tests path setup (Jiri Olsa)
. Fix id_hdr_size initialization (Jiri Olsa)
. Move some header files from tools/perf/ to tools/include/ to make them available to
other tools/ dwelling codebases (Namhyung Kim)
. Fix 'probe' build when DWARF support libraries not present (Arnaldo Carvalho de Melo)
Refactorings:
. Move logic to warn about kptr_restrict'ed kernels to separate
function in 'report' (Arnaldo Carvalho de Melo)
. Move hist browser selection code to separate function (Arnaldo Carvalho de Melo)
. Move histogram entries collapsing to separate function (Arnaldo Carvalho de Melo)
. Introduce evlist__for_each() & friends (Arnaldo Carvalho de Melo)
. Automate setup of FEATURE_CHECK_(C|LD)FLAGS-all variables (Jiri Olsa)
. Move arch setup into seprate Makefile (Jiri Olsa)
Trivial stuff:
. Remove misplaced __maybe_unused in 'stat' (Arnaldo Carvalho de Melo)
. Remove old evsel_list usage in 'record' (Arnaldo Carvalho de Melo)
. Comment typo fix (Cody P Schafer)
. Remove unused test-volatile-register-var.c (Yann Droneaud)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.15 (GNU/Linux)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=a//S
-----END PGP SIGNATURE-----
Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core
Pull perf tooling updates from Arnaldo Carvalho de Melo:
New features:
* perf record: Add --initial-delay option (Andi Kleen)
* Column colouring improvements in 'diff' (Ramkumar Ramachandra)
Fixes:
* Don't show counter information when workload fails (Arnaldo Carvalho de Melo)
* Fixup leak on error path in parse events test. (Arnaldo Carvalho de Melo)
* Fix --delay option in 'stat' man page (Andi Kleen)
* Use the DWARF unwind info only if loaded (Jean Pihet):
Developer stuff:
* Improve forked workload error reporting by sending the errno in the signal
data queueing integer field, using sigqueue and by doing the signal setup in
the evlist methods, removing open coded equivalents in various tools. (Arnaldo Carvalho de Melo)
* Do more auto exit cleanup shores in the 'evlist' destructor, so that the tools
don't have to all do that sequence. (Arnaldo Carvalho de Melo)
* Pack 'struct perf_session_env' and 'struct trace' (Arnaldo Carvalho de Melo)
* Include tools/lib/api/ in MANIFEST, fixing detached tarballs (Arnaldo Carvalho de Melo)
* Add test for building detached source tarballs (Arnaldo Carvalho de Melo)
* Shut up libtracevent plugins make message (Jiri Olsa)
* Fix installation tests path setup (Jiri Olsa)
* Fix id_hdr_size initialization (Jiri Olsa)
* Move some header files from tools/perf/ to tools/include/ to make them available to
other tools/ dwelling codebases (Namhyung Kim)
* Fix 'probe' build when DWARF support libraries not present (Arnaldo Carvalho de Melo)
Refactorings:
* Move logic to warn about kptr_restrict'ed kernels to separate
function in 'report' (Arnaldo Carvalho de Melo)
* Move hist browser selection code to separate function (Arnaldo Carvalho de Melo)
* Move histogram entries collapsing to separate function (Arnaldo Carvalho de Melo)
* Introduce evlist__for_each() & friends (Arnaldo Carvalho de Melo)
* Automate setup of FEATURE_CHECK_(C|LD)FLAGS-all variables (Jiri Olsa)
* Move arch setup into seprate Makefile (Jiri Olsa)
Trivial stuff:
* Remove misplaced __maybe_unused in 'stat' (Arnaldo Carvalho de Melo)
* Remove old evsel_list usage in 'record' (Arnaldo Carvalho de Melo)
* Comment typo fix (Cody P Schafer)
* Remove unused test-volatile-register-var.c (Yann Droneaud)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The body of i2c_parent_is_i2c_adapter() is currently guarded by
I2C_MUX. It should be CONFIG_I2C_MUX instead.
Among potentially other problems, this resulted in i2c_lock_adapter()
only locking I2C mux child adapters, and not the parent adapter. In
turn, this could allow inter-mingling of mux child selection and I2C
transactions, which could result in I2C transactions being directed to
the wrong I2C bus, and possibly even switching between busses in the
middle of a transaction.
One concrete issue caused by this bug was corrupted HDMI EDID reads
during boot on the NVIDIA Tegra Seaboard system, although this only
became apparent in recent linux-next, when the boot timing was changed
just enough to trigger the race condition.
Fixes: 3923172b3d ("i2c: reduce parent checking to a NOOP in non-I2C_MUX case")
Cc: Phil Carmody <phil.carmody@partner.samsung.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
There are three files in oss for which I could not find an easy way to
replace interruptible_sleep_on_timeout with a non-racy version. This
patch instead just adds a private implementation of the function, now
named oss_broken_sleep_on, and changes over the remaining users in
sound/oss/ so we can remove the global interface.
[fixed coding style warnings by tiwai]
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The use of interruptible_sleep_on_timeout in the dmasound driver
is questionable and we want to kill off all sleep_on variants.
This replaces the calls with wait_event_interruptible_timeout
where possible, to wait for a particular event instead of blocking
in a racy way. In the sq_write function, the easiest solution is
an open-coded prepare_to_wait loop.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
sleep_on is known to be racy and going away because of this. All instances
of interruptible_sleep_on and interruptible_sleep_on_timeout in the midibuf
driver can trivially be replaced with wait_event_interruptible and
wait_event_interruptible_timeout.
[fixed coding style warnings by tiwai]
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Interruptible_sleep_on is racy and we want to remove it. This replaces
the use in the vwsnd driver with an open-coded prepare_to_wait
loop that fixes the race between concurrent open() and close() calls,
and also drops the global mutex while waiting here, which restores
the original behavior that was changed during the BKL removal.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
