Fix the following section warning in drivers/iommu/amd_iommu.c :
WARNING: vmlinux.o(.text+0x526e77): Section mismatch in reference from the function prealloc_protection_domains() to the function .init.text:alloc_passthrough_domain()
The function prealloc_protection_domains() references
the function __init alloc_passthrough_domain().
This is often because prealloc_protection_domains lacks a __init
annotation or the annotation of alloc_passthrough_domain is wrong.
Cc: stable@vger.kernel.org
Signed-off-by: Steffen Persvold <sp@numascale.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
We're currently not freeing card->rtd in cases where the card is
unregistered before being instantiated - convert it to devm_kzalloc() to
make sure that happens.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@ti.com>
* tag 'imx25-iomux-ds' of git://git.pengutronix.de/git/imx/linux-2.6:
iomux-mx25.h slew rate adjusted for LCD __LD pins
(update to v3.3-rc6)
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This is an initial drm/kms driver for the displaylink devices.
Supports fb_defio,
supports KMS dumb interface
supports 24bpp via conversion to 16bpp, hw can do this better.
supports hot unplug using new drm core features.
On an unplug, it disables connector polling, unplugs connectors
from sysfs, unplugs fbdev layer (using Kay's API), drops all the
USB device URBs, and call the drm core to unplug the device.
This driver is based in large parts on udlfb.c so I've licensed
it under GPLv2.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Two parts to this, one is simple unplug from sysfs for the device node.
The second adds an unplugged state, if we have device opens, we
just set the unplugged state and return, if we have no device
opens we drop the drm device.
If after a lastclose we discover we are unplugged we then
drop the drm device.
v2: use an atomic for unplugged and wrap it for users,
add checks on open + mmap + ioctl entry points.
Signed-off-by: Dave Airlie <airlied@redhat.com>
In order to get correct ordering at hot-unplug for userspace,
we need to tear down all the sysfs bits at the correct time.
This adds a helper to allow drivers to remove the sysfs nodes
for all connectors.
Signed-off-by: Dave Airlie <airlied@redhat.com>
a step towards correct hot unplug for USB devices, we need to
remove the userspace facing bits at the unplug time for correct
udev operation.
Signed-off-by: Dave Airlie <airlied@redhat.com>
The USB graphics card driver delays the unregistering of the framebuffer
device to a workqueue, which breaks the userspace visible remove uevent
sequence. Recent userspace tools started to support USB graphics card
hotplug out-of-the-box and rely on proper events sent by the kernel.
The framebuffer device is a direct child of the USB interface which is
removed immediately after the USB .disconnect() callback. But the fb device
in /sys stays around until its final cleanup, at a time where all the parent
devices have been removed already.
To work around that, we remove the sysfs fb device directly in the USB
.disconnect() callback and leave only the cleanup of the internal fb
data to the delayed work.
Before:
add /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2 (usb)
add /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0 (usb)
add /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/graphics/fb0 (graphics)
remove /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0 (usb)
remove /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2 (usb)
remove /2-1.2:1.0/graphics/fb0 (graphics)
After:
add /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2 (usb)
add /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0 (usb)
add /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/graphics/fb1 (graphics)
remove /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/graphics/fb1 (graphics)
remove /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0 (usb)
remove /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2 (usb)
Cc: stable@vger.kernel.org
Tested-by: Bernie Thompson <bernie@plugable.com>
Acked-by: Bernie Thompson <bernie@plugable.com>
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Commit 3ccf3e8306 ("printk/sched: Introduce special
printk_sched() for those awkward moments") overlooked
an #ifdef, so move code around to respect these directives.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Randy Dunlap <rdunlap@xenotime.net>
Link: http://lkml.kernel.org/r/1331811337.18960.179.camel@twins
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Add a check to the init-path of the AMD IOMMUv2 driver if
the hardware is available in the system. Only allocate all
the resources if it is really available.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
mach-ux500/timer.c lacked the inclusion of mach/irqs.h, and thus
failed to compile. Fix it and also remove an unused variable.
Test compiled only.
Reported-by: Lee Jones <lee.jones@linaro.org>
Cc: Arnd Bergman <arnd@arndb.de>
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Since the kernel.org relaunch the URL for the IOMMU git tree
changed. Update MAINTAINERS file accordingly.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Add a helper function to copy a display mode. Use it in
drm_mode_duplicate() and nouveau mode_fixup hooks.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
The blob property data is always allocated immediately after the object
header. No need for the extra indirection when accessing it, just use
a flexible array member.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Check drm_mode_object_get() return value everywhere.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
drm_crtc_convert_umode() and drm_crtc_convert_to_umode() are never
used outside drm_crtc.c, so make them static. Also make the input
mode structure const for both functions.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Change drm_mode_attachmode_crtc() to take an "all or nothing" approach.
If an error is returned, there are no side effects visible.
Also change the function to always duplicate the mode passed in.
Also change the function to not give up when it finds the first
connector without and encoder.
A simpler approach would be to just remove the function completely as
it's unused currently.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Make sure the requested CRTC viewport fits inside the
framebuffer.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
The internal mode representation drm_display_mode uses signed data
types. When converting the user mode to internal representation,
check that the unsigned values don't overflow the signed datatypes.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
The mode passed to the .set_config() hook was never freed. The drivers
will make a copy of the mode, so simply free it when done.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
drm_mode_attachmode() always returns 0. Change the return type to void.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
The crtc x/y panning coordinates are stored as signed integers
internally. The user provides them as unsigned, so we should check
that the user provided values actually fit in the internal datatypes.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
When converting from a drm_display_mode to drm_mode_modeinfo, print a
warning if the the timings values don't fit into the __u16 datatype.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
The drm_display_mode type is a bitmask so it should be unsigned.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
When doing a mode set with the special fb id -1, reject the mode set if
no fb is currently bound to the crtc.
Also remove the pointless list traversal to find the current crtc based
on the current crtc :)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
We fall apart somewhat on resume because we don't invoke all the resume
methods as we should. Fix the silly error in the logic.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Current sh-hspi had wrong write/read method which was not linux standard.
If spi_transfer requests tx[2], rx[2] len=2,
then, driver should run tx[0], rx[0], tx[1], rx[1].
But current sh-hspi runs tx[0], tx[1], rx[0], rx[1].
This patch fixes it up.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
* 'exynos-drm-fixes' of git://git.infradead.org/users/kmpark/linux-samsung:
drm exynos: use drm_fb_helper_set_par directly
drm/exynos: Fix fb_videomode <-> drm_mode_modeinfo conversion
drm/exynos: fix runtime_pm fimd device state on probe
drm/exynos: use correct 'exynos-drm' name for platform device
Current sh-hspi had used platform-specific speed.
This patch remove it, and use spi_transfer specific speed.
It removes unnecessary flags from struct sh_hspi_info,
but struct sh_hspi_info is still exist, since sh-hspi needs
platform info in the future.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Commit 054ebc (spi: Compatibility with direction which is used in samsung
DMA operation) does not build as one hunk adds a brace to the first branch
of an if statement without adding at least the correspoding close. Remove
the unwanted brace.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
msg->complete will be called in spi_finalize_current_message().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
The status variable is guaranteed to be 0 at that location anyway.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
mixed bag here, a few minor diagnostic tweaks, some driver enhancements
and the dmaengine conversion for ep93xx drivers which was tested a while
ago and just waiting for a signoff.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
iQIcBAABAgAGBQJPYKHPAAoJEBus8iNuMP3dWVwQAJ00p2eZfvN25aWtOLgAoZAT
Z6s8AfKBTN/sHa8uxGT9RIxnYuPc7AQRG998xZSPLqAv129Hzb6y/iHmK3anVMWS
7kwL5HlqhfVqpAwGDtXgMkLGVYVR1j0wpBRisSBFWrc/pXC7uTrffryi4Ko0DAZz
D6TMW69KAov8AaNXsB762mDKzcfhWtKEH68AYHIFqL5fqV83CEzvz2lRxYUpur7l
zNvWK9wO+7XU2IsRLi67opB94psSMqBWMNlGvsUczr5A9MS9uoJDfBHrD3mhmxaz
M+W7ezesufyGQLmWq01Gbgx9YfSxb8Jb4vJNt+zRe51isv7goGuLe5vxb7v3FuGH
kFHFfXgLswENvJYCnQRBXOpkbne/PPb7Yb/w3X7pol3+v/xpWXqHIaxKItnpTa1b
ty9pDtZMAzKSxv5i5vMCR6DsMJXO0QwZH93wi3jQAf8d/MUbohzfxT1GVEWnGGYI
G4bfXgAY/1lXpVCEBYtngOybQmHQA0o8vSF2E1C6ZYyRQj3XES0jUNE2J2P6IGIm
myUSXzu73jLU3reudFZypop7CHtwbLRJiCF3jzF71qB9ZkQ6dXVLpy5hN3vE/D0t
BoxgtDW1X3qH7h9Sa18Dkajg102hcgzCCER5C6Q5Fjw5nlMregZVFizx+u05WW9T
jAe4veUEbiK9t9laGJIs
=AOrs
-----END PGP SIGNATURE-----
Merge tag 'asoc-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into topic/asoc
Linus decided to go for another week so here's a few more updates - a
mixed bag here, a few minor diagnostic tweaks, some driver enhancements
and the dmaengine conversion for ep93xx drivers which was tested a while
ago and just waiting for a signoff.
GFP_ATOMIC is used in snd_pcm_link() just because the kmalloc is
called inside a lock. Since this function isn't too critical for
speed and is rarely called in practice, better to allocate the chunk
at first before spinlock and free it in error paths, so that
GFP_KERNEL can be used.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Allows the constraint lists to be declared const by drivers which seems
reasonable; there's plenty of other constification we could do if we were
being complete but this was easy and quick.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
info->fix.visual already is correctly set from drm_fb_helper_fill_fix.
info->fix.line_length is also set from drm_fb_helper_fill_fix,
so drm_fb_helper_set_par directly instead of a custom
exynos_drm_fbdev_set_par.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
The fb_videomode structure stores the front porch and back porch in the
right_margin and left_margin fields respectively. right_margin should
thus be computed with hsync_start - hdisplay, and left_margin with
htotal - hsync_end. The same holds for the vertical direction.
Active Front Sync Back
Region Porch Porch
<-------------------><----------------><-------------><---------------->
//////////////////|
////////////////// |
////////////////// |.................. ..................
_______________
<------ xres -------><- right_margin -><- hsync_len -><- left_margin -->
<---- hdisplay ----->
<------------ hsync_start ------------>
<--------------------- hsync_end -------------------->
<--------------------------------- htotal ----------------------------->
Fix the fb_videomode <-> drm_mode_modeinfo conversion functions
accordingly.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
A call to pm_runtime_set_active() forces device to be at the active
state and skips calling its runtime suspend/resume callbacks. This
results in a freeze with a new power domain code based on gen_pd. Fimd
driver does all required runtime power management calls, so this
pm_runtime_set_active call is buggy. This patch removes it and corrects
clock management in probe function (clocks are now enabled by
pm_runtime_get_sync() call).
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Currently Exynos DRM driver uses DRIVER_NAME ('exynos') name for the
core platform device. This is confusing, because it doesn't refer to the
function the platform device is performing. This patch renames the
platform device to the 'exynos-drm', which matches the convention for
naming the platform devices. The name used inside DRM subsystem has not
been changed.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Add the base support for the new policy extensions. This does not bring
any additional functionality, or change current semantics.
Signed-off-by: John Johansen <john.johansen@canonical.com>
Acked-by: Kees Cook <kees@ubuntu.com>
We should use the 'ifdebug' wrapper rather than trying to inline
tests of nfs_debug, so that the code compiles correctly when we
don't define NFS_DEBUG.
Reported-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
"struct file_operations"->poll() expects "unsigned int" return value.
All files in /sys/kernel/security/tomoyo/ directory other than
/sys/kernel/security/tomoyo/query and /sys/kernel/security/tomoyo/audit should
return POLLIN | POLLRDNORM | POLLOUT | POLLWRNORM rather than -ENOSYS.
Also, /sys/kernel/security/tomoyo/query and /sys/kernel/security/tomoyo/audit
should return POLLOUT | POLLWRNORM rather than 0 when there is no data to read.
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: James Morris <james.l.morris@oracle.com>
