Adding voltage swing table for edp to support low vswings.
v2: Rebased.
Signed-off-by: Sonika Jindal <sonika.jindal@intel.com>
Reviewed-by: Sivakumar Thulasimani <sivakumar.thulasimani@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
According to the PCI docs and Rafael, we don't need to be doing explicit
enables and disables in our init and teardown routines, as they're taken
care of by the PCI core. So drop the pm_runtime_disable() at teardown
and pm_runtime_set_active() at init.
This fixes one failure of the basic-pci-d3-state test on my BYT.
v2: drop extra get_noresume() and put_noidle() (Rafael)
Signed-off-by: Jesse Barnes <jbarnes at virtuousgeek.org>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Acked-by: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Bit 16 of GuC status indicates resuming from RC6. The LAPIC_DONE
status is a reliable readiness flag only when resuming from RC6.
This fix a racing issue that allocation of doorbell fails whilst
GuC init is not finished.
Signed-off-by: Alex Dai <yu.dai@intel.com>
Reviewed-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Always name any variable pointing at the adjusted mode as
'adjustead_mode'. This will make it much easier to identify
when we should use the crtc_ timings and when we shoudln't.
Conversion was performed with coccinelle:
@@
expression E;
identifier I;
@@
- struct drm_display_mode *I = &E.adjusted_mode;
+ struct drm_display_mode *adjusted_mode = &E.adjusted_mode;
<...
- I
+ adjusted_mode
...>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
[danvet: Fixup conflicts.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Replace intel_dvo->panel_fixed_mode with the appropriate intel_panel
stuff. Now all connectors that have a fixed mode use intel_panel.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Another interesting criteria to work dmc as expected is pw1 to be
enabled by driver and dmc will shut it off in its execution
sequence. If already disabled by driver dmc will get confuse and
behave differently than expected found during pc10 entry issue
for skl.
So berfore we disable power-well 1, added check if dmc firmware is
present and driver will not disable power well 1, but for any reason
if firmware is not present of failed to load we can shut off the
power well 1 which will save some power.
As skl is currently fully dependent on dmc to go in lowest possible
power state (dc6) but the same is not applicable for bxt. Display
engine can enter into dc9 without dmc, hence unblocking disable call.
v1: Initial version.
v2: Rebased as per current patch series.
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Damien Lespiau <damien.lespiau@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Sunil Kamath <sunil.kamath@intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Signed-off-by: Vathsala Nagaraju <vathsala.nagaraju@intel.com>
Reviewed-by: A.Sunil Kamath <sunil.kamath@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
While display engine entering into low power state no need to disable
cdclk pll as CSR firmware of dmc will take care. If pll is already
enabled firmware execution sequence will be blocked. This is one
of the criteria for dmc to work properly.
v1: Initial version.
v2: Based on review comment from Daniel added code commnent.
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Damien Lespiau <damien.lespiau@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Sunil Kamath <sunil.kamath@intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Signed-off-bt: Vathsala Nagaraju <vathsala.nagaraju@intel.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.com>
Reviewed-by: A.Sunil Kamath <sunil.kamath@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This patch remove the function call to set the firmware
loading status as uninitialized during suspend.
Dmc firmware will restore the firmware in normal suspend. In previous
patch added a check to directly read the hardware status and load
the firmware if got reset during resume from suspend-hibernation.
Cc: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Signed-off-by: Vathsala Nagaraju <vathsala.nagaraju@intel.com>
Reviewed-by: A.Sunil Kamath <sunil.kamath@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Dmc will restore the csr program except DC9, cold boot,
warm reset, PCI function level reset, and hibernate/suspend.
intel_csr_load_program() function is used to load the firmware
data from kernel memory to csr address space.
All values of csr address space will be zero if it got reset and
the first byte of csr program is always a non-zero if firmware
is loaded successfuly. Based on hardware status will load the
firmware.
Without this condition check if we overwrite the firmware data the
counters exposed for dc5/dc6 (help for debugging) will be nullified.
Note: Above commit message seems to be confused and the real problem
apparently going on is that for suspend-to-idle and system standby the
firmware survives (it's like runtime pm), but it doesn't for
suspend-to-mem and hibernate-to-disk. All the other talking about DC9
and pci reset are irrelevant for the path touched here (only driver
load and system resume functions) and might not be true statements.
v1: Initial version.
v2: Based on review comments from Daniel,
- Added a check to know hardware status and load the firmware if not loaded.
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Damien Lespiau <damien.lespiau@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Sunil Kamath <sunil.kamath@intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Signed-off-by: Vathsala Nagaraju <vathsala.nagaraju@intel.com>
Reviewed-by: A.Sunil Kamath <sunil.kamath@intel.com>
[danvet: Explain clearly in the code comment when we need to reload
and when not and make it a FIXME. Also deconfuse the commit message
with a note. Also: Make. it. compile.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Virtualized systems often use a virtual P2X4 south bridge.
Detect this in intel_detect_pch and make a best guess as to which PCH
we should be using.
This was seen on vmware esxi hypervisor. When passing the graphics device
through to a guest, it can not pass through the PCH. Instead it simulates
a P2X4 southbridge.
Signed-off-by: Robert Beckett <robert.beckett@intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
In case we have less than maximum allowed channels (8) and autoconfiguration is
enabled the DWC_PARAMS read is wrong because it uses different arithmetic to
what is needed for channel priority setup.
Re-do the caclulations properly. This now works on AVR32 board well.
Fixes: fed2574b3c (dw_dmac: introduce software emulation of LLP transfers)
Cc: yitian.bu@tangramtek.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
->load is deprecated, bus functions are deprecated and everyone
should use drm_dev_alloc®ister.
So update the .tmpl (and pull a bunch of the overview docs into the
sourcecode to increase chances that it'll stay in sync in the future)
and add notes to functions which are deprecated. I didn't bother to
clean up and document the unload sequence similarly since that one is
still a bit a mess: drm_dev_unregister does way too much,
drm_unplug_dev does what _unregister should be doing but then has the
complication of promising something it doesn't actually do (it doesn't
unplug existing open fds for instance, only prevents new ones).
Motivated since I don't want to hunt every new driver for usage of
drm_platform_init any more ;-)
v2: Reword the deprecation note for ->load a bit, using Laurent's
suggestion as an example (but making the wording a bit stronger even).
Fix spelling in commit message.
v3: More spelling fixes from Laurent.
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: David Herrmann <dh.herrmann@gmail.com>
Acked-by: David Herrmann <dh.herrmann@gmail.com> (v2)
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The only thing mode_fixup was doing was set the adjusted_mode->vrefresh to
60, but it already has the value of 60 when the decon_mode_fixup() is
called. That means this call is actually pointless and can be removed.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The only thing mode_fixup was doing was set the adjusted_mode->vrefresh to
60, but it already has the value of 60 when the fimd_mode_fixup() is
called. That means this call is actually pointless and can be removed.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
This patch fixes an over flow issue with the TX ring descriptor. Each
descriptor is 32B in size and an operation requires 2 of these
descriptors.
Signed-off-by: Rameshwar Prasad Sahu <rsahu@apm.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
dma_release_channel() decrements privatecnt counter and almost all dma_get*
function increments it with the exception of dma_get_slave_channel().
In most cases this does not cause issue since normally the channel is not
requested and released, but if a driver requests DMA channel via
dma_get_slave_channel() and releases the channel the privatecnt will be
unbalanced and this will prevent for example getting channel for memcpy.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Protect the rotator_clk_crtl() function with an #ifdef CONFIG_PM guard
to avoid "defined but not used" warnings.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Protect the fimc_clk_ctrl() function with an #ifdef CONFIG_PM guard to
avoid "defined but not used" warnings.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Protect the suspend and resume callbacks with an #ifdef CONFIG_PM_SLEEP
guard to avoid "defined but not used" warnings.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Don't create a fake mmap offset in exynos_drm_gem_dumb_map_offset. If
not, it will call drm_gem_create_mmap_offset whenever user requests
DRM_IOCTL_MODE_MAP_DUMB ioctl.
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The drm_gem_object_release() function already performs this cleanup,
so there is no reason to do it explicitly.
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
All the user of these functions are inside exynos-drm driver and
you don't need to export the symbols for that case.
Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The beginning of statement in function is next line of a brace.
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
By if statment, some function callings are written twice. It needs
several line feed by indentation in if statment. Make to one function
calling from outside if statment.
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The exynos_drm_gem_init() is used only in exynos_drm_gem.c file. Make it
static and don't export it.
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
They will be freed right or was freed already, so NULL assignment is
unnecessary.
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
When obj->import_attach is existed, code calling drm_prime_gem_destroy()
was removed from commit 67e93c808b ("drm/exynos: stop copying sg
table"), and it's a fault.
The drm_prime_gem_destroy() is cleanup function which GEM drivers need
to call when they use drm_gem_prime_import() to import dma-bufs, so
exynos-drm driver using drm_gem_prime_import() needs calling
drm_prime_gem_destroy().
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
There is no guarantee that DMA addresses are the same as physical
addresses, but dma_to_pfn() knows how to convert a dma_addr_t to a PFN
which can then be converted to a struct page.
Suggested-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
We have requested the firmware and it was loaded but we missed releasing
it both on success and error.
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Backmerge to catch up with 4.3. slightly more involved conflict in the
irq code, but nothing beyond adjacent changes.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Currently, sun4i_dma_free_contract iterates over lists and frees memory
as it goes through them, causing reads to recently freed memory to
be performed. Fix this by using the safe version of the iterator, so
freed memory is not referenced at all.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Emilio López <emilio@elopez.com.ar>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
1. Finally fix booting of all 8 cores on Exynos Octa (Exynos542x): all
8 cores are booting and can be used. The fix, based on vendor
code and bootloader behavior, is as for time being only
for MCPM enabled path.
2. Fix thermal boot issue on SMDK5250.
3. Fix invalid clock used for FIMD IOMMU.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=Xcnj
-----END PGP SIGNATURE-----
Merge tag 'samsung-fixes-4.3' of http://github.com/krzk/linux into v4.3-samsung-fixes
Fixes for Exynos (DT and mach code):
1. Finally fix booting of all 8 cores on Exynos Octa (Exynos542x): all
8 cores are booting and can be used. The fix, based on vendor
code and bootloader behavior, is as for time being only
for MCPM enabled path.
2. Fix thermal boot issue on SMDK5250.
3. Fix invalid clock used for FIMD IOMMU.
Recent changes in the Hyper-V driver:
b4370df2b1 ("Drivers: hv: vmbus: add special crash handler")
broke the build when CONFIG_KEXEC_CORE is not set:
arch/x86/built-in.o: In function `hv_machine_crash_shutdown':
arch/x86/kernel/cpu/mshyperv.c:112: undefined reference to `native_machine_crash_shutdown'
Decorate all kexec related code with #ifdef CONFIG_KEXEC_CORE.
Reported-by: Jim Davis <jim.epost@gmail.com>
Reported-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: devel@linuxdriverproject.org
Cc: K. Y. Srinivasan <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1443002577-25370-1-git-send-email-vkuznets@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Writing the currently set governor into sysfs currently
seems to fail.
Fix this by setting the return code to zero before
leaving governor_store().
Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
The fib_table_lookup tracepoint found 2 places where the flowi4_flags is
not initialized.
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Because of the default 0 value of ret in dsa_slave_port_attr_set, a
driver may return -EOPNOTSUPP from the commit phase of a STP state,
which triggers a WARN() from switchdev.
This happened on a 6185 switch which does not support hardware bridging.
Fixes: 3563606258 ("switchdev: convert STP update to switchdev attr set")
Reported-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When compiling Documentation/ptp/testptp.c the following compiler
warnings are printed out:
Documentation/ptp/testptp.c: In function ‘main’:
Documentation/ptp/testptp.c:367:11: warning: format ‘%lld’ expects argument
of type ‘long long int’, but argument 3 has type ‘__s64’ [-Wformat=]
event.t.sec, event.t.nsec);
^
Documentation/ptp/testptp.c:505:5: warning: format ‘%lld’ expects argument
of type ‘long long int’, but argument 2 has type ‘__s64’ [-Wformat=]
(pct+2*i)->sec, (pct+2*i)->nsec);
^
Documentation/ptp/testptp.c:507:5: warning: format ‘%lld’ expects argument
of type ‘long long int’, but argument 2 has type ‘__s64’ [-Wformat=]
(pct+2*i+1)->sec, (pct+2*i+1)->nsec);
^
Documentation/ptp/testptp.c:509:5: warning: format ‘%lld’ expects argument
of type ‘long long int’, but argument 2 has type ‘__s64’ [-Wformat=]
(pct+2*i+2)->sec, (pct+2*i+2)->nsec);
This happens because __s64 is by default defined as "long" on ppc64,
not as "long long". However, to fix these warnings, it's possible to
define the __SANE_USERSPACE_TYPES__ so that __s64 gets defined to
"long long" on ppc64, too.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Both new_steering_entry() and existing_steering_entry() return values
based on their success or failure, but currently they fall through
silently. This can make troubleshooting difficult, as we were unable
to tell which one of these two functions returned errors or
specifically what code was returned. This patch remedies that
situation by passing the return codes to err, which is returned by
mlx4_qp_attach_common() itself.
This also addresses a leak in the call to mlx4_bitmap_free() as well.
Signed-off-by: Robb Manes <rmanes@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Frames destined to an unknown address must be forwarded to the CPU
port. Otherwise incoming ARP, dhcp leases, etc, do not work.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Earlier patch 6ae459bda tried to detect void ckecksum partial
skb by comparing pull length to checksum offset. But it does
not work for all cases since checksum-offset depends on
updates to skb->data.
Following patch fixes it by validating checksum start offset
after skb-data pointer is updated. Negative value of checksum
offset start means there is no need to checksum.
Fixes: 6ae459bda ("skbuff: Fix skb checksum flag on skb pull")
Reported-by: Andrew Vagin <avagin@odin.com>
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The data race happens on ps2dev->cmdcnt and ps2dev->cmdbuf contents.
__ps2_command reads that data concurrently with the interrupt handler. As
the result, for example, if a response arrives just after the timeout,
__ps2_command can copy out garbage from ps2dev->cmdbuf but then see that
ps2dev->cmdcnt is 0 and return success.
Stop the interrupt handler with serio_pause_rx() before reading the
results.
The data race was found with KernelThreadSanitizer (KTSAN).
Signed-off-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Another attempt at drm-misc for 4.4 ...
- better atomic helpers for runtime pm drivers
- atomic fbdev
- dp aux i2c STATUS_UPDATE handling (for short i2c replies from the sink)
- bunch of constify patches
- inital kerneldoc for vga switcheroo
- some vblank code cleanups from Ville and Thierry
- various polish all over
* tag 'topic/drm-misc-2015-09-25' of git://anongit.freedesktop.org/drm-intel: (57 commits)
drm/irq: Add drm_crtc_vblank_count_and_time()
drm/irq: Rename drm_crtc -> crtc
drm: drm_atomic_crtc_get_property should be static
drm/gma500: Remove DP_LINK_STATUS_SIZE redefinition
vga_switcheroo: Set active attribute to false for audio clients
drm/core: Preserve the fb id on close.
drm/core: Preserve the framebuffer after removing it.
drm: Use vblank timestamps to guesstimate how many vblanks were missed
drm: store_vblank() is never called with NULL timestamp
drm: Clean up drm_calc_vbltimestamp_from_scanoutpos() vbl_status
drm: Limit the number of .get_vblank_counter() retries
drm: Pass flags to drm_update_vblank_count()
drm/i915: Fix vblank count variable types
drm: Kill pixeldur_ns
drm: Stop using linedur_ns and pixeldur_ns for vblank timestamps
drm: Move timestamping constants into drm_vblank_crtc
drm/fbdev: Update legacy plane->fb refcounting for atomic restore
drm: fix kernel-doc warnings in drm_crtc.h
vga_switcheroo: Sort headers alphabetically
drm: Spell vga_switcheroo consistently
...
Wolfgang reported that IPv6 stack is ignoring oif in output route lookups:
With ipv6, ip -6 route get always returns the specific route.
$ ip -6 r
2001:db8:e2::1 dev enp2s0 proto kernel metric 256
2001:db8:e2::/64 dev enp2s0 metric 1024
2001:db8:e3::1 dev enp3s0 proto kernel metric 256
2001:db8:e3::/64 dev enp3s0 metric 1024
fe80::/64 dev enp3s0 proto kernel metric 256
default via 2001:db8:e3::255 dev enp3s0 metric 1024
$ ip -6 r get 2001:db8:e2::100
2001:db8:e2::100 from :: dev enp2s0 src 2001:db8:e3::1 metric 0
cache
$ ip -6 r get 2001:db8:e2::100 oif enp3s0
2001:db8:e2::100 from :: dev enp2s0 src 2001:db8:e3::1 metric 0
cache
The stack does consider the oif but a mismatch in rt6_device_match is not
considered fatal because RT6_LOOKUP_F_IFACE is not set in the flags.
Cc: Wolfgang Nothdurft <netdev@linux-dude.de>
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Otherwise 4294967295 (MBit/s) (-1) will be printed when there is no link.
Documentation/ABI/testing/sysfs-class-net does not state if this shall be
signed or unsigned.
Also remove the now unused variable fmt_udec.
Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Several functions can return negative value in case of error,
so their return type should be fixed as well as type of variables
to which this value is assigned.
The problem has been detected using proposed semantic patch
scripts/coccinelle/tests/assign_signed_to_unsigned.cocci [1].
[1]: http://permalink.gmane.org/gmane.linux.kernel/2046107
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Aaron Conole says:
====================
af_unix: return data from multiple SKBs on recv() with MSG_PEEK flag
This patch set implements a bugfix for kernel.org bugzilla #12323, allowing
MSG_PEEK to return all queued data on the unix domain socket, not just the
data contained in a single SKB.
This is the v3 version of this patch, which includes a suggested modification
by Eric Dumazet to convert the unix_sk() conversion macro to a static inline
function. These patches are independent and can be applied separately.
This set was tested over a 24-hour period, utilizing a loop continually
executing the bugzilla issue attached python code. It was instrumented with
a pr_err_once() ([ 13.798683] unix: went there at least one time).
v2->v3:
- Added Eric Dumazet's suggestion for #define to static inline
- Fixed an issue calling unix_state_lock() with an invalid argument
v3->v4:
- Eliminated an XXX comment
- Changed from goto unlock to explicit unix_state_unlock() and break
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
AF_UNIX sockets now return multiple skbs from recv() when MSG_PEEK flag
is set.
This is referenced in kernel bugzilla #12323 @
https://bugzilla.kernel.org/show_bug.cgi?id=12323
As described both in the BZ and lkml thread @
http://lkml.org/lkml/2008/1/8/444 calling recv() with MSG_PEEK on an
AF_UNIX socket only reads a single skb, where the desired effect is
to return as much skb data has been queued, until hitting the recv
buffer size (whichever comes first).
The modified MSG_PEEK path will now move to the next skb in the tree
and jump to the again: label, rather than following the natural loop
structure. This requires duplicating some of the loop head actions.
This was tested using the python socketpair python code attached to
the bugzilla issue.
Signed-off-by: Aaron Conole <aconole@bytheb.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
