The current kernel behaviour is to reenable interrupts unconditionally
when taking a page fault. This patch changes this to only enable them
if interrupts were previously enabled.
It also fixes a problem seen with this fix in place: the kernel previously
flushed the vsyscall page when handling a signal, which is not only
unncessary, but caused a possible sleep with interrupts disabled.
Signed-off-by: Stuart Menefy <stuart.menefy@st.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Add implementation of flush_icache_range() suitable for signal handler
and kprobes. Remove flush_cache_sigtramp() and change signal.c to use
flush_icache_range().
Signed-off-by: Chris Smith <chris.smith@st.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
sh_pcic_io_xxx function are very old.
In linux-2.4, mrshpc_ss socket driver used this function.
But there is not this driver to the present kernel.
I deleted these cords and checked operation.
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
The CPU of AP-325RXA is SH7723, but a CPU becomes selectable.
This patch fixes this problem.
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Enable SH-Ether support and NFS userland support.
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Add support SH-Ether for Hitachi Solution Engine.
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
This patch contains the following cleanups:
- make the following needlessly global code static:
- cf-enabler.c: cf_init()
- cpu/clock.c: __clk_enable()
- cpu/clock.c: __clk_disable()
- process_32.c: default_idle()
- time_32.c: struct clocksource_sh
- timers/timer-tmu.c: struct tmu_timer_ops
- remove the following unused functions (no CONFIG_BLK_DEV_FD on sh):
- process_{32,64}.c: disable_hlt()
- process_{32,64}.c: enable_hlt()
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
This patch makes the needlessly global pcibios_max_latency static.
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
This patch makes the needlessly global EARLY_PCI_OP's static.
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
This patch makes the needlessly global aica_rtc_{get,set}timeofday()
static.
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
The connect and disconnect functions are unnecessary - everything they do can be
accomplished in the initial probe - so remove them.
Signed-off-by: Adrian McMenamin <adrian@mcmen.demon.co.uk>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
This patch adds basic support for the SH7763RDP board.
This supports a basic stuff provided in SH7763, like SCIF,
NOR Flash and USB host.
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
SH7763 has 3 SCIF device. Current code supports SCIF0 and 1.
SCIF0 and 1 are same register constitution, but only SCIF2 is different.
I added support of SCIF2.
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
This board is SH7723 base board.
This has SCIF, LCDC, USB Host controler, NOR/NAND Flash, Sound,
Ether and other.
This patch supports SCIF, NOR Flash.
Signed-off-by: Yusuke Goda <goda.yusuke@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
This consolidates everything but the bare assembly routines, which we
will sync up in a follow-up patch.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
16kB is a useful size on nommu, while 64kB still tends to be too big to
be useful. Newer MMUs are likely to support this as well, so plug it
in in anticipation of those, too.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
PAGE_SIZE doesn't need to be fixed at 4096 on nommu, so stub in a !MMU
case for the various PAGE_SIZE Kconfig options.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
This moves get_fs/set_fs() and friends in to asm/segment.h. The
mm_segment_t definition is likewise consolidated from the _32/_64 split.
This is prepatory groundwork for using the generic address space limit
and verification routines across mmu/nommu configs.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Currently this is only linked in for CONFIG_BINFMT_ELF, make it dependent
on CONFIG_ELF_CORE, so it's both selectable there and also linked in for
CONFIG_BINFMT_ELF_FDPIC.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
While implementing binfmt_elf_fdpic on SH it quickly became apparent
that SH was the first platform to support both binfmt_elf_fdpic and
binfmt_elf, as well as the only of the FDPIC platforms to make use of the
auxvt.
Currently binfmt_elf_fdpic uses a special version of NEW_AUX_ENT() where
the first argument is the entry displacement after csp has been adjusted,
being reset after each adjustment. As we have no ability to sort this out
through the platform's ARCH_DLINFO, this index needs to be managed
entirely in create_elf_fdpic_tables(). Presently none of the platforms
that set their own auxvt entries are able to do so through their
respective ARCH_DLINFOs when using binfmt_elf_fdpic.
In addition to this, binfmt_elf_fdpic has been looking at
DLINFO_ARCH_ITEMS for the number of architecture-specific entries in the
auxvt. This is legacy cruft, and is not defined by any platforms in-tree,
even those that make heavy use of the auxvt. AT_VECTOR_SIZE_ARCH is
always available, and contains the number that is of interest here, so we
switch to using that unconditionally as well.
As this has direct bearing on how much stack is used, platforms that have
configurable (or dynamically adjustable) NEW_AUX_ENT calls need to either
make AT_VECTOR_SIZE_ARCH more fine-grained, or leave it as a worst-case
and live with some lost stack space if those entries aren't pushed (some
platforms may also need to purposely sacrifice some space here for
alignment considerations, as noted in the code -- although not an issue
for any FDPIC-capable platform today).
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Acked-by: David Howells <dhowells@redhat.com>
This patch fixes the following build error:
<-- snip -->
...
MODPOST 1837 modules
ERROR: "board_pci_channels" [drivers/pcmcia/yenta_socket.ko] undefined!
...
make[2]: *** [__modpost] Error 1
<-- snip -->
I freely admit that it's a pathological configuration, but as long as
it is allowed it should build.
Reported-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
CONFIG_SUPERH32 is currently trickling into userspace unistd.h. Attached
patch uses __SH5__ define in userspace.
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
When using single_open(), single_release() should be used instead
of seq_release(), otherwise there is a memory leak.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
These days most of the attributes in struct inode are properly kept in
sync by XFS. This patch removes the need for vn_revalidate completely by:
- keeping inode.i_flags uptodate after any flags are updated in
xfs_ioctl_setattr
- keeping i_mode, i_uid and i_gid uptodate in xfs_setattr
SGI-PV: 984566
SGI-Modid: xfs-linux-melb:xfs-kern:31679a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Tim Shimmin <tes@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
it can be switched to take struct iattr directly and thus simplify the
implementation greatly. Also rename the ATTR_ flags to XFS_ATTR_ to not
conflict with the ATTR_ flags used by the VFS.
SGI-PV: 984565
SGI-Modid: xfs-linux-melb:xfs-kern:31678a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Tim Shimmin <tes@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
->setattr but also addition XFS-specific attributes: project id, inode
flags and extent size hint. Having these in a single function makes it
more complicated and forces to have us a bhv_vattr intermediate structure
eating up stackspace.
This patch adds a new xfs_ioctl_setattr helper for the XFS ioctls that set
these attributes and remove the code to set them through xfs_setattr.
SGI-PV: 984564
SGI-Modid: xfs-linux-melb:xfs-kern:31677a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Tim Shimmin <tes@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
particular case, the delta param which is supposed to describe the region
where extents have changed was not updated appropriately.
SGI-PV: 984030
SGI-Modid: xfs-linux-melb:xfs-kern:31663a
Signed-off-by: Tim Shimmin <tes@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Olaf Weber <olaf@sgi.com>
Remount currently happily accept any option thrown at it, although the
only filesystem specific option it actually handles is barrier/nobarrier.
And it actually doesn't handle these correctly either because it only uses
the value it parsed when we're doing a ro->rw transition. In addition to
that there's also a bad bug in xfs_parseargs which doesn't touch the
actual option in the mount point except for a single one,
XFS_MOUNT_SMALL_INUMS and thus forced any filesystem that's every
remounted in some way to not support 64bit inodes with no way to recover
unless unmounted.
This patch changes xfs_fs_remount to use it's own linux/parser.h based
options parse instead of xfs_parseargs and reject all options except for
barrier/nobarrier and to the right thing in general. Eventually I'd like
to have a single big option table used for mount aswell but that can wait
for a while.
SGI-PV: 983964
SGI-Modid: xfs-linux-melb:xfs-kern:31382a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Tim Shimmin <tes@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
md raid1 can pass down barriers, but does not set an ordered flag on the
queue, so xfs does not even attempt a barrier write, and will never use
barriers on these block devices.
Remove the flag check and just let the barrier write test determine
barrier support.
A possible risk here is that if something does not set an ordered flag and
also does not properly return an error on a barrier write... but if it's
any consolation jbd/ext3/reiserfs never test the flag, and don't even do a
test write, they just disable barriers the first time an actual journal
barrier write fails.
SGI-PV: 983924
SGI-Modid: xfs-linux-melb:xfs-kern:31377a
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Tim Shimmin <tes@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Currently the xfs module init/exit code is a mess. It's farmed out over a
lot of function with very little error checking. This patch makes sure we
propagate all initialization failures properly and clean up after them.
Various runtime initializations are replaced with compile-time
initializations where possible to make this easier. The exit path is
similarly consolidated.
There's now split out function to create/destroy the kmem zones and
alloc/free the trace buffers. I've also changed the ktrace allocations to
KM_MAYFAIL and handled errors resulting from that.
And yes, we really should replace the XFS_*_TRACE ifdefs with a single
XFS_TRACE..
SGI-PV: 976035
SGI-Modid: xfs-linux-melb:xfs-kern:31354a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
can use the _ACL_TYPE_* definitions in linux-2.6/xfs_xattr.c. The
forthcoming generic acl code will also fix this problem.
SGI-PV: 982343
SGI-Modid: xfs-linux-melb:xfs-kern:31369a
Signed-off-by: Tim Shimmin <tes@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
If we don't do the blocksize/PAGESIZE check before calling
xfs_sb_validate_fsb_count() we can assert if we try to mount with a
blocksize > pagesize. The assert is valid so leave it and just move the
blocksize/pagesize check earlier.
SGI-PV: 983734
SGI-Modid: xfs-linux-melb:xfs-kern:31365a
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: David Chinner <dgc@sgi.com>
As reported by Michael-John Turner XFS updates the mtime on the source
inode of a rename call in case it's a directory and changes the parent.
This doesn't make any sense, is not mentioned in the standards and not
performed by any other Linux filesystems so remove it.
SGI-PV: 983684
SGI-Modid: xfs-linux-melb:xfs-kern:31364a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Barry Naujok <bnaujok@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
algorithm
If xfs_bmbt_split() cannot find an AG with sufficient free space to
satisfy a full extent btree split then fall back to the lowspace allocator
algorithm.
SGI-PV: 983338
SGI-Modid: xfs-linux-melb:xfs-kern:31359a
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: David Chinner <dgc@sgi.com>
When free space is running low the extent allocator may choose to allocate
an extent from an AG without leaving sufficient space for a btree split
when inserting the new extent (see where xfs_bmap_btalloc() sets minleft
to 0). In this case the allocator will enable the lowspace algorithm which
is supposed to allow further allocations (such as btree splits and
newroots) to allocate from sequential AGs. This algorithm has been broken
for a long time and this patch restores its behaviour.
SGI-PV: 983338
SGI-Modid: xfs-linux-melb:xfs-kern:31358a
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: David Chinner <dgc@sgi.com>
The bmap btree split code relies on a previous data extent allocation
(from xfs_bmap_btalloc()) to find an AG that has sufficient space to
perform a full btree split, when inserting the extent. When converting
unwritten extents we don't allocate a data extent so a btree split will be
the first allocation. In this case we need to set minleft so the allocator
will pick an AG that has space to complete the split(s).
SGI-PV: 983338
SGI-Modid: xfs-linux-melb:xfs-kern:31357a
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: David Chinner <dgc@sgi.com>
