* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
ceph: select CRYPTO
ceph: check mapping to determine if FILE_CACHE cap is used
ceph: only send one flushsnap per cap_snap per mds session
ceph: fix cap_snap and realm split
ceph: stop sending FLUSHSNAPs when we hit a dirty capsnap
ceph: correctly set 'follows' in flushsnap messages
ceph: fix dn offset during readdir_prepopulate
ceph: fix file offset wrapping at 4GB on 32-bit archs
ceph: fix reconnect encoding for old servers
ceph: fix pagelist kunmap tail
ceph: fix null pointer deref on anon root dentry release
Fsync performance for small files achieved by cfq on high-end disks is
lower than what deadline can achieve, due to idling introduced between
the sync write happening in process context and the journal commit.
Moreover, when competing with a sequential reader, a process writing
small files and fsync-ing them is starved.
This patch fixes the two problems by:
- marking journal commits as WRITE_SYNC, so that they get the REQ_NOIDLE
flag set,
- force all queues that have REQ_NOIDLE requests to be put in the noidle
tree.
Having the queue associated to the fsync-ing process and the one associated
to journal commits in the noidle tree allows:
- switching between them without idling,
- fairness vs. competing idling queues, since they will be serviced only
after the noidle tree expires its slice.
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Tested-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Corrado Zoccolo <czoccolo@gmail.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Rather than calculating the qstrs for . and .. each time
we need them, its better to keep a constant version of
these and just refer to them when required.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Reviewed-by: Christoph Hellwig <hch@infradead.org>
The recovery workqueue can be freezable since
we want it to finish what it is doing if the system is to
be frozen (although why you'd want to freeze a cluster node
is beyond me since it will result in it being ejected from
the cluster). It does still make sense for single node
GFS2 filesystems though.
The glock workqueue will benefit from being able to run more
work items concurrently. A test running postmark shows
improved performance and multi-threaded workloads are likely
to benefit even more. It needs to be high priority because
the latency directly affects the latency of filesystem glock
operations.
The delete workqueue is similar to the recovery workqueue in
that it must not get blocked by memory allocations, and may
run for a long time.
Potentially other GFS2 threads might also be converted to
workqueues, but I'll leave that for a later patch.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>
GFS2's idea of which return codes it needs to handle was based
upon those listed in dlm.h. Those didn't cover all the possible
codes and listed some which never happen. This updates GFS2 to
handle all the codes which can actually be returned from the
DLM under various circumstances.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Due to the design of the VFS, it is quite usual for operations on GFS2
to consist of a lookup (requiring a shared lock) followed by an
operation requiring an exclusive lock. If a remote node has cached an
exclusive lock, then it will receive two demote events in rapid succession
firstly for a shared lock and then to unlocked. The existing min hold time
code was triggering in this case, even if the node was otherwise idle
since the state change time was being updated by the initial demote.
This patch introduces logic to skip the min hold timer in the case that
a "double demote" of this kind has occurred. The min hold timer will
still be used in all other cases.
A new glock flag is introduced which is used to keep track of whether
there have been any newly queued holders since the last glock state
change. The min hold time is only applied if the flag is set.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Tested-by: Abhijith Das <adas@redhat.com>
This patch adds support for fallocate to gfs2. Since the gfs2 does not support
uninitialized data blocks, it must write out zeros to all the blocks. However,
since it does not need to lock any pages to read from, gfs2 can write out the
zero blocks much more efficiently. On a moderately full filesystem, fallocate
works around 5 times faster on average. The fallocate call also allows gfs2 to
add blocks to the file without changing the filesize, which will make it
possible for gfs2 to preallocate space for the rindex file, so that gfs2 can
grow a completely full filesystem.
Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This adds a check to ensure that if we reach the block allocator
that we don't try and proceed if there is no alloc structure
hanging off the inode. This should only happen if there is a bug
in GFS2. The error return code is distinctive in order that it
will be easily spotted.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
With the update of the truncate code, ip->i_disksize and
inode->i_size are merely copies of each other. This means
we can remove ip->i_disksize and use inode->i_size exclusively
reducing the size of a GFS2 inode by 8 bytes.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This updates GFS2's truncate code to use the new truncate
sequence correctly. This is a stepping stone to being
able to remove ip->i_disksize in favour of using i_size
everywhere now that the two sizes are always identical.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Cc: Nick Piggin <npiggin@suse.de>
Cc: Christoph Hellwig <hch@lst.de>
Commit 2fde99cb55 "UBIFS: mark VFS SB RO too"
introduced regression. This commit made UBIFS set the 'MS_RDONLY' flag in the
VFS superblock when it switches to R/O mode due to an error. This was done
to make VFS show the R/O UBIFS flag in /proc/mounts.
However, several places in UBIFS relied on the 'MS_RDONLY' flag and assume this
flag can only change when we re-mount. For example, 'ubifs_put_super()'.
This patch introduces new UBIFS flag - 'c->ro_mount' which changes only when
we re-mount, and preserves the way UBIFS was originally mounted (R/W or R/O).
This allows us to de-initialize UBIFS cleanly in 'ubifs_put_super()'.
This patch also changes all 'ubifs_assert(!c->ro_media)' assertions to
'ubifs_assert(!c->ro_media && !c->ro_mount)', because we never should write
anything if the FS was mounter R/O.
All the places where we test for 'MS_RDONLY' flag in the VFS SB were changed
and now we test the 'c->ro_mount' flag instead, because it preserves the
original UBIFS mount type, unlike the 'MS_RDONLY' flag.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Coda's REQ_* defines were renamed to avoid clashes with the block layer
(commit 4aeefdc69f: "coda: fixup clash with block layer REQ_*
defines").
However one was missed and response messages are no longer matched with
requests and waiting threads are no longer woken up. This patch fixes
this.
Signed-off-by: Jan Harkes <jaharkes@cs.cmu.edu>
[ Also fixed up whitespace while at it -Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
mmotm/fs/ocfs2/cluster/tcp.c: In function ‘o2net_send_message_vec’:
mmotm/fs/ocfs2/cluster/tcp.c:980:6: warning: ‘ret’ may be used uninitialized in this function
It seems a real bug introduced by commit 9af0b38ff3 (ocfs2/net:
Use wait_event() in o2net_send_message_vec()).
cc: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
A synchronous rename can be interrupted by a SIGKILL. If that happens
during a sillyrename operation, it's possible for the rename call to
be sent to the server, but the task exits before processing the
reply. If this happens, the sillyrenamed file won't get cleaned up
during nfs_dentry_iput and the server is left with a dangling .nfs* file
hanging around.
Fix this problem by turning sillyrename into an asynchronous operation
and have the task doing the sillyrename just wait on the reply. If the
task is killed before the sillyrename completes, it'll still proceed
to completion.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
...since that's where most of the sillyrenaming code lives. A comment
block is added to the beginning as well to clarify how sillyrenaming
works. Also, make nfs_async_unlink static as nfs_sillyrename is the only
caller.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Right now, v3 and v4 have their own variants. Create a standard struct
that will work for v3 and v4. v2 doesn't get anything but a simple error
and so isn't affected by this.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Each NFS version has its own version of the rename args container.
Standardize them on a common one that's identical to the one NFSv4
uses.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
See if the i_data mapping has any pages to determine if the FILE_CACHE
capability is currently in use, instead of assuming it is any time the
rdcache_gen value is set (i.e., issued -> used).
This allows the MDS RECALL_STATE process work for inodes that have cached
pages.
Signed-off-by: Sage Weil <sage@newdream.net>
Sending multiple flushsnap messages is problematic because we ignore
the response if the tid doesn't match, and the server may only respond to
each one once. It's also a waste.
So, skip cap_snaps that are already on the flushing list, unless the caller
tells us to resend (because we are reconnecting).
Signed-off-by: Sage Weil <sage@newdream.net>
Remove all remaining references to the struct nameidata from the low level
NFS layers. Again pass down a partially initialised struct nfs_open_context
when we want to do atomic open+create.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Remove references to 'struct nameidata' from the low-level open_revalidate
code, and replace them with a struct nfs_open_context which will be
correctly initialised upon success.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Start moving the 'struct nameidata' dependent code out of the lower level
NFS code in preparation for the removal of open intents.
Instead of the struct nameidata, we pass down a partially initialised
struct nfs_open_context that will be fully initialised by the atomic open
upon success.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
As a convenience, introduce a kernel command line option to enable
NFSROOT debugging messages.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Clean up: now that mount option parsing for nfsroot is handled
in fs/nfs/super.c, remove code in fs/nfs/nfsroot.c that is no
longer used. This includes code that constructs the legacy
nfs_mount_data structure, and code that does a MNT call to the
server.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Replace duplicate code in NFSROOT for mounting an NFS server on '/'
with logic that uses the existing mainline text-based logic in the NFS
client.
Add documenting comments where appropriate.
Note that this means NFSROOT mounts now use the same default settings
as v2/v3 mounts done via mount(2) from user space.
vers=3,tcp,rsize=<negotiated default>,wsize=<negotiated default>
As before, however, no version/protocol negotiation with the server is
done.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Clean up: To reduce confusion, rename nfs_root_name as nfs_root_parms,
as this buffer contains more than just the name of the remote server.
Introduce documenting comments around nfs_root_setup().
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
During boot, a random character is displayed instead of a tab.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The R/O state may have various reasons:
1. The UBI volume is R/O
2. The FS is mounted R/O
3. The FS switched to R/O mode because of an error
However, in UBIFS we have only one variable which represents cases
1 and 3 - 'c->ro_media'. Indeed, we set this to 1 if we switch to
R/O mode due to an error, and then we test it in many places to
make sure that we stop writing as soon as the error happens.
But this is very unclean. One consequence of this, for example, is
that in 'ubifs_remount_fs()' we use 'c->ro_media' to check whether
we are in R/O mode because on an error, and we print a message
in this case. However, if we are in R/O mode because the media
is R/O, our message is bogus.
This patch introduces new flag - 'c->ro_error' which is set when
we switch to R/O mode because of an error. It also changes all
"if (c->ro_media)" checks to "if (c->ro_error)" checks, because
this is what the checks actually mean. We do not need to check
for 'c->ro_media' because if the UBI volume is in R/O mode, we
do not allow R/W mounting, and now writes can happen. This is
guaranteed by VFS. But it is good to double-check this, so this
patch also adds many "ubifs_assert(!c->ro_media)" checks.
In the 'ubifs_remount_fs()' function this patch makes a bit more
changes - it fixes the error messages as well.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Looks like this crept in, in a recent update.
Reported-by: Krzysztof Urbaniak <urban@bash.org.pl>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
The cap_snap creation/queueing relies on both the current i_head_snapc
_and_ the i_snap_realm pointers being correct, so that the new cap_snap
can properly reference the old context and the new i_head_snapc can be
updated to reference the new snaprealm's context. To fix this, we:
- move inodes completely to the new (split) realm so that i_snap_realm
is correct, and
- generate the new snapc's _before_ queueing the cap_snaps in
ceph_update_snap_trace().
Signed-off-by: Sage Weil <sage@newdream.net>
All the blkdev_issue_* helpers can only sanely be used for synchronous
caller. To issue cache flushes or barriers asynchronously the caller needs
to set up a bio by itself with a completion callback to move the asynchronous
state machine ahead. So drop the BLKDEV_IFL_WAIT flag that is always
specified when calling blkdev_issue_* and also remove the now unused flags
argument to blkdev_issue_flush and blkdev_issue_zeroout. For
blkdev_issue_discard we need to keep it for the secure discard flag, which
gains a more descriptive name and loses the bitops vs flag confusion.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
When CONFIG_OCFS2_DEBUG_MASKLOG is undefined, we don't use the dentry
variable in ocfs2_sync_file(). Let's just move all access to the dentry
inside the logging call.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
This change extends the partition_meta_info structure to
support EFI GPT-specific metadata and ensures that data
is copied in on partition scanning.
Signed-off-by: Will Drewry <wad@chromium.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
I'm reposting this patch series as v4 since there have been no additional
comments, and I cleaned up one extra bit of unneeded code (in 3/3). The patches
are against Linus's tree: 2bfc96a127
(2.6.36-rc3).
Would this patchset be suitable for inclusion in an mm branch?
This changes adds a partition_meta_info struct which itself contains a
union of structures that provide partition table specific metadata.
This change leaves the union empty. The subsequent patch includes an
implementation for CONFIG_EFI_PARTITION-based metadata.
Signed-off-by: Will Drewry <wad@chromium.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
* 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6:
SUNRPC: Fix the NFSv4 and RPCSEC_GSS Kconfig dependencies
statfs() gives ESTALE error
NFS: Fix a typo in nfs_sockaddr_match_ipaddr6
sunrpc: increase MAX_HASHTABLE_BITS to 14
gss:spkm3 miss returning error to caller when import security context
gss:krb5 miss returning error to caller when import security context
Remove incorrect do_vfs_lock message
SUNRPC: cleanup state-machine ordering
SUNRPC: Fix a race in rpc_info_open
SUNRPC: Fix race corrupting rpc upcall
Fix null dereference in call_allocate
Tavis Ormandy pointed out that do_io_submit does not do proper bounds
checking on the passed-in iocb array:
if (unlikely(nr < 0))
return -EINVAL;
if (unlikely(!access_ok(VERIFY_READ, iocbpp, (nr*sizeof(iocbpp)))))
return -EFAULT; ^^^^^^^^^^^^^^^^^^
The attached patch checks for overflow, and if it is detected, the
number of iocbs submitted is scaled down to a number that will fit in
the long. This is an ok thing to do, as sys_io_submit is documented as
returning the number of iocbs submitted, so callers should handle a
return value of less than the 'nr' argument passed in.
Reported-by: Tavis Ormandy <taviso@cmpxchg8b.com>
Signed-off-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
cifs_get_smb_ses must be called on a server pointer on which it holds an
active reference. It first does a search for an existing SMB session. If
it finds one, it'll put the server reference and then try to ensure that
the negprot is done, etc.
If it encounters an error at that point then it'll return an error.
There's a potential problem here though. When cifs_get_smb_ses returns
an error, the caller will also put the TCP server reference leading to a
double-put.
Fix this by having cifs_get_smb_ses only put the server reference if
it found an existing session that it could use and isn't returning an
error.
Cc: stable@kernel.org
Reviewed-by: Suresh Jayaraman <sjayaraman@suse.de>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Stop sending FLUSHSNAP messages when we hit a capsnap that has dirty_pages
or is still writing. We'll send the newer capsnaps only after the older
ones complete.
Signed-off-by: Sage Weil <sage@newdream.net>
The 'follows' should match the seq for the snap context for the given snap
cap, which is the context under which we have been dirtying and writing
data and metadata. The snapshot that _contains_ those updates thus
_follows_ that context's seq #.
Signed-off-by: Sage Weil <sage@newdream.net>
