The IPMI driver used enable_irq and disable_irq when it got into situations
where it couldn't allocate memory; it did this to avoid having the interrupt
just lock the machine when it couldn't get memory to perform the transaction
to disable the interrupt.
This patch modifies the driver to not use disable_irq and enable_irq. It
instead sends the messages to the BMC to perform this operation. It also
makes sure interrupts are cleanly disabled when the interface is shut down and
cleans up some shutdown things that are no longer necessary.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add support for of_platform_driver to the ipmi_si module. When loading the
module, the driver will be registered to of_platform. The driver will be
probed for all devices with the type ipmi. It's supporting devices with
compatible settings ipmi-kcs, ipmi-smic and ipmi-bt. Only ipmi-kcs could be
tested.
Signed-off-by: Christian Krafft <krafft@de.ibm.com>
Acked-by: Heiko J Schick <schihei@de.ibm.com>
Signed-off-by: Corey Minyard <minyard@acm.org>
Acked-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Teach the dentry slab shrinker to aggressively shrink parent dentries when
shrinking the dentry cache.
This is done to attempt to improve the situation where the dentry slab cache
gets a lot of internal fragmentation due to pages containing directory
dentries. It is expected that this change will cause some of those dentries
to be reaped earlier, and with less scanning.
Needs careful testing.
Cc: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The time shrink_dcache_parent() takes, grows quadratically with the depth
of the tree under 'parent'. This starts to get noticable at about 10,000.
These kinds of depths don't occur normally, and filesystems which invoke
shrink_dcache_parent() via d_invalidate() seem to have other depth
dependent timings, so it's not even easy to expose this problem.
However with FUSE it's easy to create a deep tree and d_invalidate()
will also get called. This can make a syscall hang for a very long
time.
This is the original discovery of the problem by Russ Cox:
http://article.gmane.org/gmane.comp.file-systems.fuse.devel/3826
The following patch fixes the quadratic behavior, by optionally allowing
prune_dcache() to prune ancestors of a dentry in one go, instead of doing
it one at a time.
Common code in dput() and prune_one_dentry() is extracted into a new helper
function d_kill().
shrink_dcache_parent() as well as shrink_dcache_sb() are converted to use
the ancestry-pruner option. Only for shrink_dcache_memory() is this
behavior not desirable, so it keeps using the old algorithm.
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Maneesh Soni <maneesh@in.ibm.com>
Acked-by: "Paul E. McKenney" <paulmck@us.ibm.com>
Cc: Dipankar Sarma <dipankar@in.ibm.com>
Cc: Neil Brown <neilb@suse.de>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This past week I was playing around with that pahole tool
(http://oops.ghostprotocols.net:81/acme/dwarves/) and looking at the size
of various struct in the kernel. I was surprised by the size of the
task_struct on x86_64, approaching 4K. I looked through the fields in
task_struct and found that a number of them were declared as "unsigned
long" rather than "unsigned int" despite them appearing okay as 32-bit
sized fields. On x86_64 "unsigned long" ends up being 8 bytes in size and
forces 8 byte alignment. Is there a reason there a reason they are
"unsigned long"?
The patch below drops the size of the struct from 3808 bytes (60 64-byte
cachelines) to 3760 bytes (59 64-byte cachelines). A couple other fields
in the task struct take a signficant amount of space:
struct thread_struct thread; 688
struct held_lock held_locks[30]; 1680
CONFIG_LOCKDEP is turned on in the .config
[akpm@linux-foundation.org: fix printk warnings]
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Taken from http://bugzilla.kernel.org/show_bug.cgi?id=5079
signed long ranges from -2.147.483.648 to 2.147.483.647 on x86 32bit
10000011110110100100111110111101 .. -2,082,844,739
10000011110110100100111110111101 .. 2,212,122,557 <- this currently gets
stored on the disk but when converting it to a 64bit signed long value it loses
its sign and becomes positive.
Cc: Andreas Dilger <adilger@dilger.ca>
Cc: <linux-ext4@vger.kernel.org>
Andreas says:
This patch is now treating timestamps with the high bit set as negative
times (before Jan 1, 1970). This means we lose 1/2 of the possible range
of timestamps (lopping off 68 years before unix timestamp overflow -
now only 30 years away :-) to handle the extremely rare case of setting
timestamps into the distant past.
If we are only interested in fixing the underflow case, we could just
limit the values to 0 instead of storing negative values. At worst this
will skew the timestamp by a few hours for timezones in the far east
(files would still show Jan 1, 1970 in "ls -l" output).
That said, it seems 32-bit systems (mine at least) allow files to be set
into the past (01/01/1907 works fine) so it seems this patch is bringing
the x86_64 behaviour into sync with other kernels.
On the plus side, we have a patch that is ready to add nanosecond timestamps
to ext3 and as an added bonus adds 2 high bits to the on-disk timestamp so
this extends the maximum date to 2242.
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
/proc/$PID/fd has r-x------ permissions, so if process does setuid(), it
will not be able to access /proc/*/fd/. This breaks fstatat() emulation
in glibc.
open("foo", O_RDONLY|O_DIRECTORY) = 4
setuid32(65534) = 0
stat64("/proc/self/fd/4/bar", 0xbfafb298) = -1 EACCES (Permission denied)
Signed-off-by: Alexey Dobriyan <adobriyan@openvz.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: James Morris <jmorris@namei.org>
Cc: Chris Wright <chrisw@sous-sol.org>
Cc: Ulrich Drepper <drepper@redhat.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Acked-By: Kirill Korotaev <dev@openvz.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
block_write_full_page() forgot to propagate ENPSOC into the address_space.
Cc: Guillaume Chazarain <guichaz@yahoo.fr>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Cleanup: setting an outstanding error on a mapping was open coded too many
times. Factor it out in mapping_set_error().
Signed-off-by: Guillaume Chazarain <guichaz@yahoo.fr>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The ever-vigilant users of linode.com noticed that an idle 2.6 UML has a
persistent load average of ~.4.
It turns out that because the UML timer handler processed softirqs before
actually delivering the tick, the tick was counted in the context of the idle
thread about half the time.
Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
hostfs needed some style goodness.
Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch allows hostfs_setattr() to work on unlinked open files by calling
set_attr() (the userspace part) with the inode's fd.
Without this, applications that depend on doing attribute changes to unlinked
open files will fail.
It works by using the fd versions instead of the path ones (for example
fchmod() instead of chmod(), fchown() instead of chown()) when an fd is
available.
Signed-off-by: Alberto Bertogli <albertito@gmail.com>
Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Use SLAB_PANIC and delete duplicated panic().
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Ian Molton <spyro@f2s.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Andi Kleen <ak@suse.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch is add white list into modpost.c for some functions and
ia64's section to fix section mismatchs.
sparse_index_alloc() and zone_wait_table_init() calls bootmem allocator
at boot time, and kmalloc/vmalloc at hotplug time. If config
memory hotplug is on, there are references of bootmem allocater(init text)
from them (normal text). This is cause of section mismatch.
Bootmem is called by many functions and it must be
used only at boot time. I think __init of them should keep for
section mismatch check. So, I would like to register sparse_index_alloc()
and zone_wait_table_init() into white list.
In addition, ia64's .machvec section is function table of some platform
dependent code. It is mixture of .init.text and normal text. These
reference of __init functions are valid too.
Signed-off-by: Yasunori Goto <y-goto@jp.fujitsu.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is to fix many section mismatches of code related to memory hotplug.
I checked compile with memory hotplug on/off on ia64 and x86-64 box.
Signed-off-by: Yasunori Goto <y-goto@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There are two problems with the existing redzone implementation.
Firstly, it's causing misalignment of structures which contain a 64-bit
integer, such as netfilter's 'struct ipt_entry' -- causing netfilter
modules to fail to load because of the misalignment. (In particular, the
first check in
net/ipv4/netfilter/ip_tables.c::check_entry_size_and_hooks())
On ppc32 and sparc32, amongst others, __alignof__(uint64_t) == 8.
With slab debugging, we use 32-bit redzones. And allocated slab objects
aren't sufficiently aligned to hold a structure containing a uint64_t.
By _just_ setting ARCH_KMALLOC_MINALIGN to __alignof__(u64) we'd disable
redzone checks on those architectures. By using 64-bit redzones we avoid that
loss of debugging, and also fix the other problem while we're at it.
When investigating this, I noticed that on 64-bit platforms we're using a
32-bit value of RED_ACTIVE/RED_INACTIVE in the 64-bit memory location set
aside for the redzone. Which means that the four bytes immediately before
or after the allocated object at 0x00,0x00,0x00,0x00 for LE and BE
machines, respectively. Which is probably not the most useful choice of
poison value.
One way to fix both of those at once is just to switch to 64-bit
redzones in all cases.
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Christoph Lameter <clameter@engr.sgi.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
I think we might just need the blk_map_kern users now. For the async
execute I added the bounce code already and the block SG_IO has it
atleady. I think the blk_map_kern bounce code got dropped because we
thought the correct gfp_t would be passed in. But I think all we need is
the patch below and all the paths are take care of. The patch is not
tested. Patch was made against scsi-misc.
The last place that is sending non sg commands may just be md/dm-emc.c
but that is is just waiting on alasdair to take some patches that fix
that and a bunch of junk in there including adding bounce support. If
the patch below is ok though and dm-emc finally gets converted then it
will have sg and bonce buffer support.
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
The boxed flag for units was never cleared. This doesn't hurt, but on
ACL updates the error recovery could reopen more units than needed.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Swen Schillig <swen@vnet.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Must clear adapter failed flag if an fsf request times out. This is
necessary because on link down situations the failed flags gets set
but the QDIO queues are still up. Since an adapter reopen will be
skipped if the failed flag is set an adapter_reopen that is issued
on fsf request timeout has no effect if the local link is down.
Might lead to locked up system if the SCSI stack is waiting for abort
completion.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Swen Schillig <swen@vnet.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Simplify request ID management and make sure that frequently used
functions are inlined. Also fix a memory leak in zfcp_adapter_enqueue()
which only gets hit in error handling.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Swen Schillig <swen@vnet.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
The SCSI stack requires low level drivers to register and
unregister devices. For zfcp this leads to the situation where
zfcp calls the SCSI stack, the SCSI tries to scan the new device
and the scan SCSI command fails. This would require the zfcp erp,
but the erp thread is already blocked in the register call.
The fix is to make sure that the calls from the ERP thread to
the SCSI stack do not block the ERP thread. In detail:
1) Use a workqueue to avoid blocking of the scsi_scan_target calls.
2) When removing a unit make sure that no scsi_scan_target call is
pending.
3) Replace scsi_flush_work with scsi_target_unblock. This avoids
blocking and has the same result.
Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: Swen Schillig <swen@vnet.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
There is a possible race condition while generating the unique
request ids and sequence numbers. Both might be read at the
same time and have the same value. Fix this by serializing the
access through the queue lock of the adapter: First call
zfcp_fsf_req_sbal_get that acquires the lock, then read and
increment the unique ids.
Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: Swen Schillig <swen@vnet.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
S_ID and D_ID are defined in the FCP spec as 3 byte fields.
Change the output in zfcp print statements accordingly to print
them with only 3 bytes.
Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: Swen Schillig <swen@vnet.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Use a newly added PCI API to issue a PCI Fundamental reset
(warm reset) to a new ipr PCI-E adapter. Typically, the
ipr adapter uses the start BIST bit in config space to reset
an adapter. Issuing start BIST on this particular adapter
results in the PCI-E logic on the card losing sync, which
causes PCI-E errors, making the card unusable. The only reset
mechanism that exists on this hardware that does not have this
problem is PCI Fundamental reset (warm reset).
Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Supported ISP types include ISP2422 and revision-2 type
ISP2432 chips.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Hardcoding the qlport_down_retry module-parameter
effectively disallowed any user-defined NVRAM setting to go
into effect.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Remove a stale check against ha->device_flags
(DFLG_NO_CABLE) as topology scanning is performed within the
DPC-thread context.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
For each request that is sent to the FCP adapter, zfcp allocates
memory. Status information and data that is being read from the
device is written to this memory by the hardware. After that,
the hardware signals this via the response queue and zfcp
continues processing.
Now, if zfcp detects that there is a signal for an incoming
response from the hardware, but there is no outstanding request
for that request id, then some memory that can be in use anywhere
in the system has just been overwritten. This should never happen,
but if it does, stop the system with a panic.
Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: Swen Schillig <swen@vnet.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
_ convert void* to struct mesh_state*
- remove unused irq argument from mesh_interrupt()
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Cc: James Bottomley <James.Bottomley@steeleye.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
For this driver cond_resched() seems to be a better alternative
Signed-off-by: Amol Lad <amol@verismonetworks.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
drivers/scsi/megaraid.c: In function 'megaraid_probe_one':
drivers/scsi/megaraid.c:4893: warning: implicit declaration of function 'mega_create_proc_entry'
drivers/scsi/megaraid.c: In function 'megaraid_remove_one':
drivers/scsi/megaraid.c:4968: warning: unused variable 'buf'
Fix by adding #defines
Signed-off-by: walter harms <wharms@bfs.de>
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Change Kconfig objects from "menu, config" into "menuconfig" so
that the user can disable the whole feature without having to
enter the menu first.
Signed-off-by: Jan Engelhardt <jengelh@gmx.de>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
This lets us get rid of some of the macro-generated functions and
shrinks the driver size significantly (about 9%).
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Use the driver data structure as the main device reference, instead of
the i2c client. It makes the driver a bit smaller, and makes more sense
as this is an hybrid driver, supporting both I2C and ISA devices.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
* Fix voltage rounding
* Drop useless macros
* Drop useless casts
* Turn macros evaluating their parameters more than once into inline
functions
* Use signed variables for temperatures
Signed-off-by: Jean Delvare <khali@linux-fr.org>
It is not an error if a system has no ams hardware. Do not clutter dmesg
in this case.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Michael Hanselmann <linux-kernel@hansmi.ch>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
A driver for the Analog Devices AD7416, AD7417 and AD7418 chips.
Signed-off-by: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Add the support for the digital temperature sensor found in recent
Intel Core CPUs.
Signed-off-by: Rudolf Marek <r.marek@assembler.cz>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Use safe MSR functions provided by arch/*/lib/msr-on-cpu.c in
arch/i386/kernel/msr.c.
Signed-off-by: Nicolas Boichat <nicolas@boichat.ch>
Cc: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
