Separate driver probing from SPI transfer functions.
Signed-off-by: Jan Glauber <jglauber@cavium.com>
Tested-by: Steven J. Hill <steven.hill@cavium.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Move the register definitions to the drivers directory because they
are only used there.
Signed-off-by: Jan Glauber <jglauber@cavium.com>
Tested-by: Steven J. Hill <steven.hill@cavium.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Instead of hard-coding the register offsets put them into a struct
and set them in the probe function.
Signed-off-by: Jan Glauber <jglauber@cavium.com>
Tested-by: Steven J. Hill <steven.hill@cavium.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Storing the system clock frequency in struct octeon_spi avoids
calling the MIPS specific octeon_get_io_clock_rate() for every transfer.
Signed-off-by: Jan Glauber <jglauber@cavium.com>
Tested-by: Steven J. Hill <steven.hill@cavium.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Remove all calls to cvmx_read_csr()/cvmx_write_csr() and use
the portable readq()/writeq() functions.
Signed-off-by: Steven J. Hill <steven.hill@cavium.com>
Signed-off-by: Jan Glauber <jglauber@cavium.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
wait_for_completion_timeout returns unsigned long not int so the check for
<= 0 should be == 0 here, and the type unsigned long. The function return
is set to -ETIMEDOUT to reflect the actual problem.
Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
wait_for_completion_timeout returns unsigned long not int so the check for
<= 0 should be == 0 here.
Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
We triggered soft-lockup under stress test which
open/access/write/close one file concurrently on more than
five different CPUs:
WARN: soft lockup - CPU#0 stuck for 11s! [who:30631]
...
[<ffffffc0003986f8>] dput+0x100/0x298
[<ffffffc00038c2dc>] terminate_walk+0x4c/0x60
[<ffffffc00038f56c>] path_lookupat+0x5cc/0x7a8
[<ffffffc00038f780>] filename_lookup+0x38/0xf0
[<ffffffc000391180>] user_path_at_empty+0x78/0xd0
[<ffffffc0003911f4>] user_path_at+0x1c/0x28
[<ffffffc00037d4fc>] SyS_faccessat+0xb4/0x230
->d_lock trylock may failed many times because of concurrently
operations, and dput() may execute a long time.
Fix this by replacing cpu_relax() with cond_resched().
dput() used to be sleepable, so make it sleepable again
should be safe.
Cc: <stable@vger.kernel.org>
Signed-off-by: Wei Fang <fangwei1@huawei.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
commit 6c51e513a3 ("lookup_dcache(): lift d_alloc() into callers")
removed the need_lookup argument from lookup_dcache(), but the
comment was forgotten. Also it no longer allocates a new dentry
if nothing was found.
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
On Marvell mv88f6180 with pin control driver one can not use multi
purpose pins 35 through 44.
I'm using this controller on an embedded board and i found that the
pin multiplexing is not the same as in the hardware spezification.
This patch alters the pin description so that mpp pins 0 to 19 as well
as 35 to 44 are usable.
Pin settings i used can be found here:
http://www.marvell.com/embedded-processors/kirkwood/assets/HW_88F6180_OpenSource.pdf
Signed-off-by: Andreas Klinger <ak@it-klinger.de>
Reviewed-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add the missing clk_disable_unprepare() before return
from k3_dma_probe() in the error handling case.
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
We get a warning about the missing MODULE_LICENSE tag for this newly
added driver module:
WARNING: modpost: missing MODULE_LICENSE() in drivers/dma/xilinx/zynqmp_dma.o
see include/linux/module.h for more information
This adds a "GPL" license, matching the "version 2 or later" information in
the comment at the start of the file.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Kedareswara rao Appana <appanad@xilinx.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Use for_each_matching_node() macro instead of open coding it.
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Acked-by: Sinan Kaya <okaya@codeaurora.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Initial support for interleaved transfer with sDMA.
The implementation only supports DMA_MEM_TO_MEM and frame_size must be 1.
sDMA needs to be configured for double indexing when ICG is needed.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
that caused misdirected requests, tagged for stable.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJXk4kSAAoJEEp/3jgCEfOLvpsIAKJTs1ELIQ5RmfvwdvqyqI0N
DoSA6rBYIwQvjqBjevJw72w5HKR7hhJoxaEjXEFrw9zbRmXMNnlk5xZpgD8vy5E3
1iCA8LtscFp4ld4ZNWIus45mUpf6/a5ugPd9Mr3V5C4J05LWqZeXufpAHNHyFbII
++hTu6J/RAg8DddEUhBcDl7c65tQpc8ai0h8ll0pLRYNFLPeCoYO3yTitEYax4fR
i6erB3+7pNWnZIsPnUTrXS4B2NG5kPmflVkD7UH9i14PwdQ4QO85LSXD1o8xYrpa
Occ9EvgFuT8zTJHckCEcT2Y0dINz2uHiE05DUea3Udz82keV9zKeZhZUDwJ95RE=
=P1qk
-----END PGP SIGNATURE-----
Merge tag 'ceph-for-4.7-rc8' of git://github.com/ceph/ceph-client
Pull ceph fix from Ilya Dryomov:
"A fix for a long-standing bug in the incremental osdmap handling code
that caused misdirected requests, tagged for stable"
The tag is signed with a brand new key - Sage is on vacation and I
didn't anticipate this"
* tag 'ceph-for-4.7-rc8' of git://github.com/ceph/ceph-client:
libceph: apply new_state before new_up_client on incrementals
In commit:
21cbc2822aa1 ("x86/mm/cpa: Unbreak populate_pgd(): stop trying to deallocate failed PUDs")
I intended to add this comment, but I failed at using git.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/242baf8612394f4e31216f96d13c4d2e9b90d1b7.1469293159.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Valdis Kletnieks bisected a boot failure back to this recent commit:
360cb4d155 ("x86/mm/cpa: In populate_pgd(), don't set the PGD entry until it's populated")
I broke the case where a PUD table got allocated -- populate_pud()
would wander off a pgd_none entry and get lost. I'm not sure how
this survived my testing.
Fix the original issue in a much simpler way. The problem
was that, if we allocated a PUD table, failed to populate it, and
freed it, another CPU could potentially keep using the PGD entry we
installed (either by copying it via vmalloc_fault or by speculatively
caching it). There's a straightforward fix: simply leave the
top-level entry in place if this happens. This can't waste any
significant amount of memory -- there are at most 256 entries like
this systemwide and, as a practical matter, if we hit this failure
path repeatedly, we're likely to reuse the same page anyway.
For context, this is a reversion with this hunk added in:
if (ret < 0) {
+ /*
+ * Leave the PUD page in place in case some other CPU or thread
+ * already found it, but remove any useless entries we just
+ * added to it.
+ */
- unmap_pgd_range(cpa->pgd, addr,
+ unmap_pud_range(pgd_entry, addr,
addr + (cpa->numpages << PAGE_SHIFT));
return ret;
}
This effectively open-codes what the now-deleted unmap_pgd_range()
function used to do except that unmap_pgd_range() used to try to
free the page as well.
Reported-by: Valdis Kletnieks <Valdis.Kletnieks@vt.edu>
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luis R. Rodriguez <mcgrof@suse.com>
Cc: Mike Krinkin <krinkin.m.u@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Toshi Kani <toshi.kani@hp.com>
Link: http://lkml.kernel.org/r/21cbc2822aa18aa812c0215f4231dbf5f65afa7f.1469249789.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The kprobe enablement work has uncovered that changes made by
a guest to MDSCR_EL1 were propagated to the host when VHE was
enabled, leading to unexpected exception being delivered.
Moving this register to the list of registers that are always
context-switched fixes the issue.
Fixes: 9c6c356832 ("arm64: KVM: VHE: Split save/restore of registers shared between guest and host")
Cc: stable@vger.kernel.org #4.6
Reported-by: Tirumalesh Chalamarla <Tirumalesh.Chalamarla@cavium.com>
Tested-by: Tirumalesh Chalamarla <Tirumalesh.Chalamarla@cavium.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
References at the rst files for C functions generated via
kernel-doc should use :c:func:.
Fix it.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
changeset b7e67f6c1b ("doc-rst: linux_tv: supress lots of warnings")
were meant to touch only on media files, but it also touched
at this script by mistake. Revert such change.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Better document a note on this header.
While here, better format dvb_ringbuffer_pkt_read_user()
to adjust it to CodingStyle.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Sphinx can't handle well typedefs. Change two typedef
occurrences, in order to cleanup some of such warnings.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Reorganize the order of the document, putting the chapters
on a more logical order and renaming some sections.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Now that the only remaining chapters at v4l2-framework are
the introduction ones, let' s rename the file.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Move the v4l2 clocks stuff from v4l2-framework to a separate
file and adds an attention that came from the v4l2-clk.h.
Note: as this is meant to be a temporary kAPI, and it is
used only by two drivers (soc_camera and em28xx), where
the first one is in deprecation process, it probably not
a worth effort to document its header.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Several functions weren't documented. Document them all.
While here, makes checkpatch.pl happy.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Move the v4l2 event-specific text from v4l2-framework.rst
to v4l2-event.rst. That helps to keep the text together with
the functions it describes, and makes easier to identify
documentation gaps.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
As we merged the videobuf chapter at the kABI section, and it
is a way more complete, just remove the small videobuf chapter
that came from framework.txt.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Add cross-references for the functions/structs and add
the markup tags to improve its display.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Add documentation for v4l2-dev.h, and put it at v4l2-framework.rst,
where struct video_device is currently documented.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Not all functions at v4l2-common.h are documented. Add
documentation for some other ones.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
There are some subdev-specific functions at v4l2-common.h
that are mentioned at v4l2-subdev.rst.
Document them.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The two new sections were missing cross-references, and had
some other minor issues with the markups. Add such things.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
