the tcp and udp code creates a set of struct file_operations at runtime
while it can also be done at compile time, with the added benefit of then
having these file operations be const.
the trickiest part was to get the "THIS_MODULE" reference right; the naive
method of declaring a struct in the place of registration would not work
for this reason.
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Zheng Liang(lzheng@redhat.com) found a bug that if we config bonding with
arp monitor, sometimes bonding driver cannot get the speed and duplex from
its slaves, it will assume them to be 100Mb/sec and Full, please see
/proc/net/bonding/bond0.
But there is no such problem when uses miimon.
(Take igb for example)
I find that the reason is that after dev_open() in bond_enslave(),
bond_update_speed_duplex() will call igb_get_settings()
, but in that function,
it runs ethtool_cmd_speed_set(ecmd, -1); ecmd->duplex = -1;
because igb get an error value of status.
So even dev_open() is called, but the device is not really ready to get its
settings.
Maybe it is safe for us to call igb_get_settings() only after
this message shows up, that is "igb: p4p1 NIC Link is Up 1000 Mbps Full Duplex,
Flow Control: RX".
So I prefer to update the speed and duplex for a slave when reseices
NETDEV_CHANGE/NETDEV_UP event.
Changelog
V2:
1 remove the "fake 100/Full" logic in bond_update_speed_duplex(),
set speed and duplex to -1 when it gets error value of speed and duplex.
2 delete the warning in bond_enslave() if bond_update_speed_duplex() returns
error.
3 make bond_info_show_slave() handle bad values of speed and duplex.
Signed-off-by: Weiping Pan <wpan@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When (de)configuring a vlan interface, the IFF_ALLMULTI ans IFF_PROMISC
flags are cleared or set on the underlying interface. So, if these flags
are changed on a vlan interface that is not up, the flags underlying
interface might be set or cleared twice.
Only propagating flag changes when a device is up makes sure this does
not happen. It also makes sure that an underlying device is not set to
promiscuous or allmulti mode for a vlan device that is down.
Signed-off-by: Matthijs Kooijman <matthijs@stdin.nl>
Signed-off-by: David S. Miller <davem@davemloft.net>
Whatever situations make this state legitimate when SMP
also would be legitimate when !SMP and f.e. preemption is
enabled.
This is dubious enough that we should just delete it entirely. If we
want to add debugging for neigh timer races, better more thorough
mechanisms are needed.
Signed-off-by: David S. Miller <davem@davemloft.net>
* 'pstore' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux:
pstore: make pstore write function return normal success/fail value
pstore: change mutex locking to spin_locks
pstore: defer inserting OOPS entries into pstore
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (62 commits)
mlx4_core: Deprecate log_num_vlan module param
IB/mlx4: Don't set VLAN in IBoE WQEs' control segment
IB/mlx4: Enable 4K mtu for IBoE
RDMA/cxgb4: Mark QP in error before disabling the queue in firmware
RDMA/cxgb4: Serialize calls to CQ's comp_handler
RDMA/cxgb3: Serialize calls to CQ's comp_handler
IB/qib: Fix issue with link states and QSFP cables
IB/mlx4: Configure extended active speeds
mlx4_core: Add extended port capabilities support
IB/qib: Hold links until tuning data is available
IB/qib: Clean up checkpatch issue
IB/qib: Remove s_lock around header validation
IB/qib: Precompute timeout jiffies to optimize latency
IB/qib: Use RCU for qpn lookup
IB/qib: Eliminate divide/mod in converting idx to egr buf pointer
IB/qib: Decode path MTU optimization
IB/qib: Optimize RC/UC code by IB operation
IPoIB: Use the right function to do DMA unmap pages
RDMA/cxgb4: Use correct QID in insert_recv_cqe()
RDMA/cxgb4: Make sure flush CQ entries are collected on connection close
...
* git://github.com/herbertx/crypto: (48 commits)
crypto: user - Depend on NET instead of selecting it
crypto: user - Add dependency on NET
crypto: talitos - handle descriptor not found in error path
crypto: user - Initialise match in crypto_alg_match
crypto: testmgr - add twofish tests
crypto: testmgr - add blowfish test-vectors
crypto: Make hifn_795x build depend on !ARCH_DMA_ADDR_T_64BIT
crypto: twofish-x86_64-3way - fix ctr blocksize to 1
crypto: blowfish-x86_64 - fix ctr blocksize to 1
crypto: whirlpool - count rounds from 0
crypto: Add userspace report for compress type algorithms
crypto: Add userspace report for cipher type algorithms
crypto: Add userspace report for rng type algorithms
crypto: Add userspace report for pcompress type algorithms
crypto: Add userspace report for nivaead type algorithms
crypto: Add userspace report for aead type algorithms
crypto: Add userspace report for givcipher type algorithms
crypto: Add userspace report for ablkcipher type algorithms
crypto: Add userspace report for blkcipher type algorithms
crypto: Add userspace report for ahash type algorithms
...
In sysfs_rename we need to remove the optimization of not calling
sysfs_unlink_sibling and sysfs_link_sibling if the renamed parent
directory is not changing. This optimization is no longer valid now
that sysfs dirents are stored in an rbtree sorted by name.
Move the assignment of s_ns before the call of sysfs_link_sibling. With
no sysfs_dirent fields changing after the call of sysfs_link_sibling
this allows sysfs_link_sibling to take any of the directory entries into
account when it builds the rbtrees, and s_ns looks like a prime canidate
to be used in the rbtree in the future.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Cc: Jiri Slaby <jirislaby@gmail.com>
Cc: Greg KH <gregkh@suse.de>
Cc: David Miller <davem@davemloft.net>
Cc: Mikulas Patocka <mpatocka@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The board changes in the imx/devel branch conflict with other changes in
the device imx/dt branch.
Conflicts:
arch/arm/mach-mx5/board-mx53_loco.c
arch/arm/mach-mx5/board-mx53_smd.c
arch/arm/plat-mxc/include/mach/common.h
arch/arm/plat-mxc/include/mach/memory.h
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This is the fifth version of the patchset (with one tiny whitespace fix)
to the Linux kernel to support the Qualcomm Hexagon architecture.
Between now and the next pull requests, Richard Kuo should have his key
signed, etc., and should be back on kernel.org. In the meantime, this
got merged as a emailed patch-series.
* Hexagon: (36 commits)
Add extra arch overrides to asm-generic/checksum.h
Hexagon: Add self to MAINTAINERS
Hexagon: Add basic stacktrace functionality for Hexagon architecture.
Hexagon: Add configuration and makefiles for the Hexagon architecture.
Hexagon: Comet platform support
Hexagon: kgdb support files
Hexagon: Add page-fault support.
Hexagon: Add page table header files & etc.
Hexagon: Add ioremap support
Hexagon: Provide DMA implementation
Hexagon: Implement basic TLB management routines for Hexagon.
Hexagon: Implement basic cache-flush support
Hexagon: Provide basic implementation and/or stubs for I/O routines.
Hexagon: Add user access functions
Hexagon: Add locking types and functions
Hexagon: Add SMP support
Hexagon: Provide basic debugging and system trap support.
Hexagon: Add ptrace support
Hexagon: Add time and timer functions
Hexagon: Add interrupts
...
There are plausible reasons for architectures to provide their own
versions of csum_partial_copy_nocheck and csum_tcpudp_magic.
By protecting these, the architecture can still re-use the
asm-generic checksum.h, instead of copying it.
Signed-off-by: Linas Vepstas <linas@codeaurora.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Richard Kuo <rkuo@codeaurora.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Mostly all stubs, as the TLB is managed by the hypervisor.
Signed-off-by: Richard Kuo <rkuo@codeaurora.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Modules should be compiled as ordinary .o's; shared objects are not
supported.
Signed-off-by: Linas Vepstas <linas@codeaurora.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Richard Kuo <rkuo@codeaurora.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This reverts commit 0db3bfc72a (""HID: multitouch: decide if hid-multitouch
needs to handle mt devices").
The generic detection of hid-mt devices has two major flaws, and was
merged prematurely. Firstly, the hid-multitouch gets loaded even when
the device is handled by a special device. Secondly, the patch only
partially duplicates the device whitelist already present in hid-core,
effectively rendering a number of devices non-functional.
Reported-by: Sean Young <sean@mess.org>
Tested-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
It is not possible to take the lock in device if device is NULL.
The mutex_lock is thus moved after the NULL test. New error handling
labels are added at the end to differentiate between the cases where
different sets of locks should be unlocks, and between whether or not
reader should be freed (only on error).
The semantic match that finds this problem is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@r@
expression E, E1;
identifier f;
statement S1,S2,S3;
@@
if (E == NULL)
{
... when != if (E == NULL || ...) S1 else S2
when != E = E1
*E->f
... when any
return ...;
}
else S3
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
