Commit graph

98450 commits

Author SHA1 Message Date
Olof Johansson
732bee4c85 [POWERPC] pasemi: update pasemi_defconfig, enable electra_cf
Refresh pasemi_defconfig and enable ELECTRA_CF=y.

Signed-off-by: Olof Johansson <olof@lixom.net>
2008-05-27 16:11:13 -05:00
Olof Johansson
c433a1b642 electra_cf: Add MODULE_DEVICE_TABLE()
Add a module device table to electra_cf so that modules can be
auto-probed/loaded.

Signed-off-by: Olof Johansson <olof@lixom.net>
2008-05-27 16:07:45 -05:00
Tony Luck
4dcc29e157 [IA64] Workaround for RSE issue
Problem: An application violating the architectural rules regarding
operation dependencies and having specific Register Stack Engine (RSE)
state at the time of the violation, may result in an illegal operation
fault and invalid RSE state.  Such faults may initiate a cascade of
repeated illegal operation faults within OS interruption handlers.
The specific behavior is OS dependent.

Implication: An application causing an illegal operation fault with
specific RSE state may result in a series of illegal operation faults
and an eventual OS stack overflow condition.

Workaround: OS interruption handlers that switch to kernel backing
store implement a check for invalid RSE state to avoid the series
of illegal operation faults.

The core of the workaround is the RSE_WORKAROUND code sequence
inserted into each invocation of the SAVE_MIN_WITH_COVER and
SAVE_MIN_WITH_COVER_R19 macros.  This sequence includes hard-coded
constants that depend on the number of stacked physical registers
being 96.  The rest of this patch consists of code to disable this
workaround should this not be the case (with the presumption that
if a future Itanium processor increases the number of registers, it
would also remove the need for this patch).

Move the start of the RBS up to a mod32 boundary to avoid some
corner cases.

The dispatch_illegal_op_fault code outgrew the spot it was
squatting in when built with this patch and CONFIG_VIRT_CPU_ACCOUNTING=y
Move it out to the end of the ivt.

Signed-off-by: Tony Luck <tony.luck@intel.com>
2008-05-27 13:24:39 -07:00
Chris Wright
cc94bc37d5 LSM: remove stale web site from MAINTAINERS
Pointed out by Adrian Bunk.

Signed-off-by: Chris Wright <chrisw@sous-sol.org>
2008-05-27 12:29:49 -07:00
Brian King
ca61668b82 [SCSI] ibmvscsi: Non SCSI error status fixup
Some versions of the Virtual I/O Server on Power
return 0x99 in the non-SCSI error status field as success,
rather than 0. This fixes the ibmvscsi driver to treat this
response as success.

Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-05-27 11:10:57 -05:00
Michael Reed
7ba2db5f38 [SCSI] fusion mpt: fix target missing after resetting external raid
Following a hard reset of a SAS raid, one of the raid targets is occasionally
missing.  I tracked this down to a pretty obscure little bug.

The LSI fusion drivers for SAS and Fibre Channel both use their respective
transport layers.  Those transport layers increment the target number
assigned to new targets.

The routine __scsi_scan_target uses the "this_id" element of the Scsi_Host
structure to avoid scanning the scsi host adapter.  Both fusion drivers set
"this_id" from a value returned in a firmware PortFacts response.  For my
particular test case (SAS) the firmware id assigned to the initiator was
173.  After enough raid resets to cause the raid targets to go and come a
sufficient number of times, the id assigned by the transport to a raid
target would match the id assigned by the host adapter to the "this_id"
field, resulting in that target not being scanned.

Fix by not assigning this_id and not checking it in slave_configure. 

Signed-off-by: Michael Reed <mdr@sgi.com>
Acked-by: "Moore, Eric" <Eric.Moore@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-05-27 10:58:09 -05:00
Linus Torvalds
3dbfd0801b Merge git://git.kernel.org/pub/scm/linux/kernel/git/hskinnemoen/avr32-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/hskinnemoen/avr32-2.6:
  avr32: Fix cpufreq oops when ondemand governor is default
  avr32: Update defconfigs
  avr32: export strnlen_user
  avr32: export copy_page
2008-05-27 08:27:20 -07:00
David Woodhouse
edb2301f29 ck804rom: fix driver_data in probe table.
There's a reason why using C99 initialisers even in the supposedly
trivial structs is a good idea.

Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-27 07:34:38 -07:00
Gerrit Renker
825de27d9e dccp ccid-3: Fix "t_ipi explosion" bug
The identification of this bug is thanks to Cheng Wei and Tomasz
Grobelny.

To avoid divide-by-zero, the implementation previously ignored RTTs
smaller than 4 microseconds when performing integer division RTT/4.

When the RTT reached a value less than 4 microseconds (as observed on
loopback), this prevented the Window Counter CCVal value from
advancing. As a result, the receiver stopped sending feedback. This in
turn caused non-ending expiries of the nofeedback timer at the sender,
so that the sending rate was progressively reduced until reaching the
minimum of one packet per 64 seconds.

The patch fixes this bug by handling integer division more
intelligently. Due to consistent use of dccp_sample_rtt(),
divide-by-zero-RTT is avoided.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-27 06:33:54 -07:00
Wei Yongjun
6079a463cf dccp: Fix to handle short sequence numbers packet correctly
RFC4340 said:
  8.5.  Pseudocode
       ...
       If P.type is not Data, Ack, or DataAck and P.X == 0 (the packet
             has short sequence numbers), drop packet and return

But DCCP has some mistake to handle short sequence numbers packet, now
it drop packet only if P.type is Data, Ack, or DataAck and P.X == 0.

Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Acked-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-27 06:22:38 -07:00
Haavard Skinnemoen
f04d264afc avr32: Fix cpufreq oops when ondemand governor is default
Move the AP7 cpufreq init to late_initcall() so that we don't try to
bring up cpufreq until the governor is ready. x86 also uses
late_initcall() for this.

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-05-27 09:37:42 +02:00
Huang Weiyi
87a54a2897 Input: apanel - remove duplicate include
Remove duplicate include file <linux/module.h>.

Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-05-27 01:38:45 -04:00
Mark Brown
43f83a8f99 Input: wm9713 - support five wire panels
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-05-27 01:37:26 -04:00
Mark Brown
5de4cd431d Input: wm97xx-core - fix race on PHY init
The chip phy_init() function must be called before the dig_enable() function
but dig_enable() is called when the device is opened and we only call
phy_init() after having reigstered the device, meaning the two can race.
Fix this by doing the phy_init() before we register the input device.

Thanks to Rodolfo Giometti <giometti@enneenne.com> for the report.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-05-27 01:37:19 -04:00
Mark Brown
ef9db4929a Input: wm97xx-core - fix driver name
Fix driver name - thanks to Guennadi Liakhovetski <g.liakhovetski@gmx.de> for
reporting this.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-05-27 01:37:08 -04:00
Mark Brown
6b32ca39d7 Input: wm97xx-core - report a phys for WM97xx touchscreens
phys is displayed in diagnostic output like that from evbug so ensure
that it is set to something.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-05-27 01:36:47 -04:00
Bruno Prémont
d35895db7a Input: i8042 - make sure Dritek quirk is invoked at resume
Also do not fail i8042 entire initialization if enabling dritek extension
fails.

Signed-off-by: Bruno Prémont <bonbons@linux-vserver.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-05-27 01:36:04 -04:00
Chien Tung
5f62560667 MAINTAINERS: Update NetEffect (iw_nes) entry
Add Chien and remove Nishi from maintainers list for NetEffect.

Signed-off-by: Chien Tung <ctung@neteffect.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-05-26 15:23:32 -07:00
Ralph Campbell
03031f71c7 IB/ipath: Fix device capability flags
The driver supports a few features (RNR NAK, port active event, SRQ
resize) that were not reported in the device capability flags.  This
patch fixes that.

Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-05-26 15:22:17 -07:00
Roland Dreier
e8ffef73c8 IB/ipath: Avoid test_bit() on u64 SDMA status value
Gabriel C <nix.or.die@googlemail.com> pointed out that when the x86
bitops are updated to operate on unsigned long, the code in
sdma_abort_task() will produce warnings:

    drivers/infiniband/hw/ipath/ipath_sdma.c: In function 'sdma_abort_task':
    drivers/infiniband/hw/ipath/ipath_sdma.c:267: warning: passing argument 2 of 'constant_test_bit' from incompatible pointer type

and so on, because it uses test_bit() to operation on a u64 value
(returned by ipath_read_kref64() for a hardware register).

Fix up these warnings by converting the test_bit() operations to &ing
with appropriate symbolic defines of the bits within the hardware
register.  This has the benign side-effect of making the code more
self-documenting as well.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-05-26 15:20:34 -07:00
Linus Torvalds
e490517a03 Linux 2.6.26-rc4 2008-05-26 11:08:11 -07:00
Oleg Nesterov
cbaffba12c posix timers: discard SI_TIMER signals on exec
Based on Roland's patch. This approach was suggested by Austin Clements
from the very beginning, and then by Linus.

As Austin pointed out, the execing task can be killed by SI_TIMER signal
because exec flushes the signal handlers, but doesn't discard the pending
signals generated by posix timers. Perhaps not a bug, but people find this
surprising. See http://bugzilla.kernel.org/show_bug.cgi?id=10460

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Austin Clements <amdragon+kernelbugzilla@mit.edu>
Cc: Roland McGrath <roland@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-26 10:37:07 -07:00
Oleg Nesterov
c8e85b4f4b posix timers: sigqueue_free: don't free sigqueue if it is queued
Currently sigqueue_free() removes sigqueue from list, but doesn't cancel the
pending signal. This is not consistent, the task should either receive the
"full" signal along with siginfo_t, or it shouldn't receive the signal at all.

Change sigqueue_free() to clear SIGQUEUE_PREALLOC but leave sigqueue on list
if it is queued.

This is a user-visible change. If the signal is blocked, it stays queued
after sys_timer_delete() until unblocked with the "stale" si_code/si_value,
and of course it is still counted wrt RLIMIT_SIGPENDING which also limits
the number of posix timers.

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Austin Clements <amdragon+kernelbugzilla@mit.edu>
Cc: Roland McGrath <roland@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-26 10:37:06 -07:00
Linus Torvalds
84a881657d Merge branch 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6
* 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6:
  i2c: Align i2c_device_id
  tuner: Do not alter i2c_client.name
2008-05-26 10:24:06 -07:00
Linus Torvalds
1434b65731 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/slab-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/slab-2.6:
  slub: ksize() abuse checks
  slob: Fix to return wrong pointer
2008-05-26 10:21:26 -07:00
Linus Torvalds
4934ed888e Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6.26
* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6.26:
  sh: Drop broken URAM support on SH7723.
  sh: update Migo-R defconfig
  sh: use sm501 8250 mfd support on r2d boards
  sh: add probe support for new sh7723 cut
  sh: fix VPU interrupt vector for sh7723
  sh: fix USBF resource for sh7722
2008-05-26 10:20:40 -07:00
Linus Torvalds
0dfdf77ab8 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6:
  sparc64: global_reg_snapshot is not for userspace
2008-05-26 10:14:37 -07:00
Linus Torvalds
c5e6fd28e5 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (52 commits)
  vlan: Use bitmask of feature flags instead of seperate feature bits
  fmvj18x_cs: add NextCom NC5310 rev B support
  xirc2ps_cs: re-initialize the multicast address in do_reset
  3C509: rx_bytes should not be increased when alloc_skb failed
  NETFRONT: Use __skb_queue_purge()
  VIRTIO: Use __skb_queue_purge()
  phylib: do EXPORT_SYMBOL on get_phy_id
  netlink: Fix nla_parse_nested_compat() to call nla_parse() directly
  WAN: protect HDLC proto list while insmod/rmmod
  drivers/net/fs_enet: remove null pointer dereference
  S2io: Version update for napi and MSI-X patches
  S2io: Added napi support when MSIX is enabled.
  S2io: Move all the transmit completions to a single msi-x (alarm) vector
  drivers/net/ehea - remove unnecessary memset after kzalloc
  au1000_eth: remove useless check
  Blackfin EMAC Driver: Removed duplicated include <linux/ethtool.h>
  cpmac bugfixes and enhancements
  e1000e: use resource_size_t, not unsigned long, for phys addrs
  net/usb: add support for Apple USB Ethernet Adapter
  uli526x: add support for netpoll
  ...
2008-05-26 10:14:02 -07:00
Eric Sandeen
571640cad3 ext4: enable barriers by default
I can't think of any valid reason for ext4 to not use barriers when
they are available;  I believe this is necessary for filesystem
integrity in the face of a volatile write cache on storage.

An administrator who trusts that the cache is sufficiently battery-
backed (and power supplies are sufficiently redundant, etc...)
can always turn it back off again.

SuSE has carried such a patch for ext3 for quite some time now.

Also document the mount option while we're at it.

Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-05-26 12:29:46 -04:00
Theodore Ts'o
034772b068 jbd2: Fix barrier fallback code to re-lock the buffer head
If the device doesn't support write barriers, the write is retried
without ordered mode.  But the buffer head needs to be re-locked or
submit_bh will fail with on BUG(!buffer_locked(bh)).

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-06-03 22:31:11 -04:00
Theodore Ts'o
cd0b6a39a1 ext4: Display the journal_async_commit mount option in /proc/mounts
Cc: Andreas Dilger <adilger@clusterfs.com>
Cc: Girish Shilamkar <girish@clusterfs.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-05-26 10:28:28 -04:00
Theodore Ts'o
624080eded jbd2: If a journal checksum error is detected, propagate the error to ext4
If a journal checksum error is detected, the ext4 filesystem will call
ext4_error(), and the mount will either continue, become a read-only
mount, or cause a kernel panic based on the superblock flags
indicating the user's preference of what to do in case of filesystem
corruption being detected.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-06-06 17:50:40 -04:00
Theodore Ts'o
8ea76900be jbd2: Fix memory leak when verifying checksums in the journal
Cc: Andreas Dilger <adilger@clusterfs.com>
Cc: Girish Shilamkar <girish@clusterfs.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-05-26 10:28:09 -04:00
Josef Bacik
944600930a ext4: fix online resize bug
There is a bug when we are trying to verify that the reserve inode's
double indirect blocks point back to the primary gdt blocks.  The fix is
obvious, we need to mod the gdb count by the addr's per block.  This was
verified using the same testcase as with the ext3 equivalent of this
patch.

Signed-off-by: Josef Bacik <jbacik@redhat.com>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-06-06 18:05:52 -04:00
Jose R. Santos
0bf7e8379c ext4: Fix uninit block group initialization with FLEX_BG
With FLEX_BG block bitmaps, inode bitmaps and inode tables _MAY_ be
allocated outside the group.  So, when initializing an uninitialized
block bitmap, we need to check the location of this blocks before
setting the corresponding bits in the block bitmap of the newly
initialized group.  Also return the right number of free blocks when
counting the available free blocks in uninit group.

Tested-by: Aneesh Kumar K.V <aneesh.kumar@inux.vnet.ibm.com>
Signed-off-by: Jose R. Santos <jrs@us.ibm.com>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-06-03 14:07:29 -04:00
Aneesh Kumar K.V
03cddb80ed ext4: Fix use of uninitialized data with debug enabled.
Fix use of uninitialized data with debug enabled.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-06-05 20:59:29 -04:00
Jiri Slaby
2548baa07d i2c: Align i2c_device_id
Align i2c_device_id.driver_data to 8 bytes to not fail on crossbuilds.

(Added in d2653e9273.)

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-05-26 16:08:40 +02:00
Michael Krufky
7271e60a95 tuner: Do not alter i2c_client.name
The tuner driver used to change i2c_client.name for its own needs, but
it really shouldn't, as this field is used by i2c-core to do the
device/driver matching. So, create and use a separate field for the
tuner driver needs.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-05-26 16:08:40 +02:00
Haavard Skinnemoen
d56acacdcd avr32: Update defconfigs
Just provide reasonable defaults for the new stuff. Tickless and
hrtimers are turned on for all boards except ATSTK1004.

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-05-26 13:38:29 +02:00
Adrian Bunk
01575995de avr32: export strnlen_user
This patch fixes the following build error:

<--  snip  -->

...
  MODPOST 1327 modules
ERROR: "strnlen_user" [drivers/input/misc/uinput.ko] undefined!
...
make[2]: *** [__modpost] Error 1

<--  snip  -->

Reported-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-05-26 13:26:36 +02:00
Adrian Bunk
a0ed3d8d94 avr32: export copy_page
This patch fixes the following build error:

<--  snip  -->

...
  MODPOST 61 modules
ERROR: "copy_page" [fs/fuse/fuse.ko] undefined!
...
make[2]: *** [__modpost] Error 1

<--  snip  -->

Also add an empty line since *_page aren't "String functions".

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-05-26 13:26:36 +02:00
Adrian Bunk
551dec47bb sparc64: global_reg_snapshot is not for userspace
global_reg_snapshot shouldn't be visible in our userspace headers.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-25 22:50:16 -07:00
Paul Mundt
9c28faaab1 sh: Drop broken URAM support on SH7723.
This was copied over from the previous MobileR bits, which doesn't
apply to R2. The URAM block on R2 is recycled for the L2 instead.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-05-26 11:45:45 +09:00
Linus Torvalds
b3733034f1 Merge git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-fixes
* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-fixes:
  Kconfig: introduce ARCH_DEFCONFIG to DEFCONFIG_LIST
  .gitignore: match ncscope.out
  scripts/ver_linux use 'gcc -dumpversion'
2008-05-25 15:00:27 -07:00
Linus Torvalds
c8ff99a7c2 Merge git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog
* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog:
  [WATCHDOG] Add ICH9DO into the iTCO_wdt.c driver
  [WATCHDOG] Fix booke_wdt.c on MPC85xx SMP system's
  [WATCHDOG] Add a watchdog driver based on the CS5535/CS5536 MFGPT timers
  [WATCHDOG] hpwdt: Fix NMI handling.
  [WATCHDOG] Blackfin Watchdog Driver: split platform device/driver
  [WATCHDOG] Add w83697h_wdt early_disable option
  [WATCHDOG] Make w83697h_wdt timeout option string similar to others
  [WATCHDOG] Make w83697h_wdt void-like functions void
2008-05-25 14:59:59 -07:00
Linus Torvalds
32522bfdae Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  [ALSA] hda - Fix capture mute Widget for stac9250/9251
  [ALSA] snd-pcsp - fix pcsp_treble_info() to honour an item number
  [ALSA] hda - Added support for Foxconn P35AX-S mainboard
  [ALSA] hda - Fix COEF and EAPD in ALC889 auto-configuration mode
  [ALSA] hda - Fix noise on VT1708 codec
  [ALSA] hda - Add model for ASUS P5K-E/WIFI-AP
2008-05-25 14:59:27 -07:00
Sam Ravnborg
73531905ed Kconfig: introduce ARCH_DEFCONFIG to DEFCONFIG_LIST
init/Kconfig contains a list of configs that are searched
for if 'make *config' are used with no .config present.
Extend this list to look at the config identified by
ARCH_DEFCONFIG.

With this change we now try the defconfig targets last.

This fixes a regression reported
by: Linus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
2008-05-25 23:03:18 +02:00
Jike Song
9723c046bd .gitignore: match ncscope.out
Sometimes I got this:

    $ git-status
    {snip}
    # On branch master
    # Untracked files:
    #   (use "git add <file>..." to include in what will be committed)
    #
    #       ncscope.out
    nothing added to commit but untracked files present (use "git add"
to track)

Fix it.

Signed-off-by: Jike Song <albcamus@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-05-25 23:02:48 +02:00
Gabriel C
656a3f7978 scripts/ver_linux use 'gcc -dumpversion'
These magic greps and hacks in ver_linux to get the gcc version always break after some gcc releases.

Since now gcc >4.3 allows compiling with '--with-pkgversion' ( which can be everything 'My Cool Gcc' or something )
ver_linux will report random junk for these.

Simply use 'gcc -dumpversion' to get the gcc version which should always work.

Signed-off-by: Gabriel C <nix.or.die@googlemail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-05-25 23:02:43 +02:00
Mauro Carvalho Chehab
587755f1f6 [ALSA] hda - Fix capture mute Widget for stac9250/9251
Fix capture mute widget for STAC9250/9251 codecs.  The widget 0x09
has no mute but 0x14 does actually.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-05-25 18:21:18 +02:00