Pull btrfs fixes from Chris Mason:
"These are small and assorted. Neil's is the oldest, I dropped the
ball thinking he was going to send it in"
* 'for-linus-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
Btrfs: support NFSv2 export
Btrfs: open_ctree: Fix possible memory leak
Btrfs: fix deadlock when finalizing block group creation
Btrfs: update fix for read corruption of compressed and shared extents
Btrfs: send, fix corner case for reference overwrite detection
The fixes for this week include one small patch that was years in the
making and that finally fixes using all eight CPUs on exynos542x.
The rest are lots of minor changes for sunxi, imx, exynos and shmobile
* fixing the minimum voltage for Allwinner A20
* thermal boot issue on SMDK5250.
* invalid clock used for FIMD IOMMU.
* audio on Renesas r8a7790/r8a7791
* invalid clock used for FIMD IOMMU
* LEDs on exynos5422-odroidxu3-common
* usb pin control for imx-rex
* imx53: fix PMIC interrupt level
* a Makefile typo
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIVAwUAVhbS1GCrR//JCVInAQLwiQ/+LeAAqODQKpLI9BhKSSa1YiPgs8zr/O+q
6SpyNf969j2d67hhDbBNIrcNw7bdYElogq+2emrPnsJ/o/GX18VFs+41s+zb2P1r
dxmH9LA7wrUg05nc/TgyYXJZQa+JIZBymYJ6Kc9cdbkhmRZazAcV6POT4ZG5qfER
QDwPGwBn/wXLMZ0yJnocUVexTn+GUdy0b7XRg141PYtYHg+mA0EEPHqul1IyB/rV
W5u9HoA86mWLH+8CEzl7RTCXEPga/+ScxqimDFMW7Ok6F+CkPnD7u5z92p8dU38T
J0Dc/xSA9w+8Y4AQuN1qM7g5W/qNszozaBusshIMF+UK5dDEEwWpdpvRr4mLpqLS
hohu7zUel3V5n846Rwkr181Hh9yn5V7MiJ0vjj5gYmYeteLs5Gar94I/vnd9BMrD
7lJo0aTMcoQNIvf2i1SEfyhQW/YOdWiU452sxtzNFe/wJ/6hdQxx/qgBMA1Dxm7/
s1+bQ3ndBa5qiiTcVg5XBAGnxe5Eo7lqHStDyJ6hy3v8nt5ew1iPbBt8XEwHonDC
8whzRKQMI70hz5nQoMLjEwiGhT3yFQu2IyrFD2yPldq2i4VC2iZybWianKa5BXlu
16Easzhk05uZu340+tqCxxGwTaVSjNcJ+HRHRvW4cw6sReCeUPOtlnzlOGRufZpO
pi2gCB3aTnY=
=IsHY
-----END PGP SIGNATURE-----
Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Arnd Bergmann:
"The fixes for this week include one small patch that was years in the
making and that finally fixes using all eight CPUs on exynos542x.
The rest are lots of minor changes for sunxi, imx, exynos and shmobile
- fixing the minimum voltage for Allwinner A20
- thermal boot issue on SMDK5250.
- invalid clock used for FIMD IOMMU.
- audio on Renesas r8a7790/r8a7791
- invalid clock used for FIMD IOMMU
- LEDs on exynos5422-odroidxu3-common
- usb pin control for imx-rex
- imx53: fix PMIC interrupt level
- a Makefile typo"
* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
ARM: dts: Fix wrong clock binding for sysmmu_fimd1_1 on exynos5420
ARM: dts: Fix bootup thermal issue on smdk5250
ARM: shmobile: r8a7791 dtsi: Add CPG/MSTP Clock Domain for sound
ARM: shmobile: r8a7790 dtsi: Add CPG/MSTP Clock Domain for sound
arm-cci500: Don't enable PMU driver by default
ARM: dts: fix usb pin control for imx-rex dts
ARM: imx53: qsrb: fix PMIC interrupt level
ARM: imx53: include IRQ dt-bindings header
ARM: dts: add suspend opp to exynos4412
ARM: dts: Fix LEDs on exynos5422-odroidxu3
ARM: EXYNOS: reset Little cores when cpu is up
ARM: dts: Fix Makefile target for sun4i-a10-itead-iteaduino-plus
ARM: dts: sunxi: Raise minimum CPU voltage for sun7i-a20 to meet SoC specifications
Hardware virtualisation of GICv3 is only supported by 64bit hosts for
the moment. Some VGICv3 bits are missing from the 32bit side, and this
patch allows to still be able to build 32bit hosts when CONFIG_ARM_GIC_V3
is selected.
To this end, we introduce a new option, CONFIG_KVM_ARM_VGIC_V3, that is
only enabled on the 64bit side. The selection is done unconditionally
because CONFIG_ARM_GIC_V3 is always enabled on arm64.
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
This patch allows ARM guests to use GICv3 on an arm64 host
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Implement the system and memory-mapped register accesses in
asm/arch_gicv3.h for 32bit architectures.
This patch is a straightforward translation of the arm64 header. 64bit
accesses are done in two times and don't need atomicity: TYPER is
read-only, and the upper-word of IROUTER is always zero on 32bit
architectures.
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
On 32bit platforms, we cannot assure that an I/O ldrd or strd will be
done atomically. Besides, an hypervisor would be unable to emulate such
accesses.
In order to allow the AArch32 version of the driver to split them into
two 32bit accesses while keeping the requirement for atomic writes, this
patch specializes the IROUTER and TYPER accesses.
Since the latter is an ID register, it won't need to be read atomically,
but we still avoid future confusion by using gic_read_typer instead of a
generic gic_readq.
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
This patch does a few simple compatibility-related changes:
- change the system register access prototypes to their actual size,
- homogenise mpidr accesses with unsigned long,
- force the 64bit register values to unsigned long long.
Note: the list registers are 64bit on GICv3, but the AArch32 vGIC driver
will need to split their values into two 32bit registers: LRn and LRCn.
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
This patch moves the GICv3 system register access helpers to
arch/arm64/. Their 32bit counterparts will need to use mrc/mcr accesses
instead of mrs_s/msr_s.
[maz: fixed conflict with Cavium erratum handling]
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
APM X-Gene GICv2m implementation has an erratum where the
MSI data needs to be the offset from the spi_start in order to
trigger the correct MSI interrupt. This is different from the
standard GICv2m implementation where the MSI data is the absolute
value within the range from spi_start to (spi_start + num_spis)
of each v2m frame.
This patch reads MSI_IIDR register (present in all GICv2m
implementations) to identify X-Gene GICv2m implementation and
apply workaround to change the data portion of MSI vector.
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Duc Dang <dhdang@apm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
The current requirements do not describe the case where a GICv3
system gets booted with system register access disabled, and
expect the kernel to drive GICv3 in GICv2 mode.
Describe the expected settings for that particular case.
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
When using a GICv3 in compatibility (v2) mode, having GICv3 system
register access enabled is not really compliant with the architecture.
Warn if the firmware (or the hypervisor) has been lazy.
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
As the firmware (or the hypervisor) may have disabled SRE access,
check that SRE can actually be enabled before declaring that we
do have that capability.
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
In order for gic_enable_sre to be used by the arm64 core code,
move it to arm-gic-v3.h. As a bonus, we now also check if
system registers have been already enabled, and return early
if they have.
In all cases, the function now returns a boolean indicating if
the enabling has been successful.
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Contrary to what was originally expected, EL3 firmware can (for whatever
reason) disable GICv3 system register access. In this case, the kernel
explodes very early.
Work around this by testing if the SRE bit sticks or not. If it doesn't,
abort the GICv3 setup, and pray that the firmware has passed a DT that
doesn't contain a GICv3 node.
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Commit 76c44f6d80 introduced the possibly for "Overflow" to be reported
by the snapshot device's status. Older userspace (e.g. lvm2) does not
handle the "Overflow" status response.
Fix this incompatibility by requiring newer userspace code, that can
cope with "Overflow", request the persistent store with overflow support
by using "PO" (Persistent with Overflow) for the snapshot store type.
Reported-by: Zdenek Kabelac <zkabelac@redhat.com>
Fixes: 76c44f6d80 ("dm snapshot: don't invalidate on-disk image on snapshot write overflow")
Reviewed-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Switch to the new of_io_request_and_map() call, so the IO resource is
properly held, and also shows up in /proc/iomem.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: http://lkml.kernel.org/r/1444063334-19832-3-git-send-email-wens@csie.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The device tree node name is typically "interrupt-controller", which is
rather useless when used in printk messages and irq chip names for
identification purposes. Use the driver name "sunxi-nmi" instead.
While at it move the identifier from pr_err() calls to the pr_fmt macro.
Also remove the "__func__" identifier from the error message in the
interrupt type setting callback, sunxi_sc_nmi_set_type(). The driver
name in the pr_fmt macro should be enough.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: http://lkml.kernel.org/r/1444063334-19832-2-git-send-email-wens@csie.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
When a CPU is offlined all interrupts that have an action are migrated to
other still online CPUs. However, if the interrupt has chained handler
installed this is not done. Chained handlers are used by GPIO drivers which
support interrupts, for instance.
When the affinity is not corrected properly we end up in situation where
most interrupts are not arriving to the online CPUs anymore. For example on
Intel Braswell system which has SD-card card detection signal connected to
a GPIO the IO-APIC routing entries look like below after CPU1 is offlined:
pin30, enabled , level, low , V(52), IRR(0), S(0), logical , D(03), M(1)
pin31, enabled , level, low , V(42), IRR(0), S(0), logical , D(03), M(1)
pin32, enabled , level, low , V(62), IRR(0), S(0), logical , D(03), M(1)
pin5b, enabled , level, low , V(72), IRR(0), S(0), logical , D(03), M(1)
The problem here is that the destination mask still contains both CPUs even
if CPU1 is already offline. This means that the IO-APIC still routes
interrupts to the other CPU as well.
We solve the problem by providing a default action for chained interrupts.
This action allows the migration code to correct affinity (as it finds
desc->action != NULL).
Also make the default action handler to emit a warning if for some reason a
chained handler ends up calling it.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Link: http://lkml.kernel.org/r/1444039935-30475-1-git-send-email-mika.westerberg@linux.intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
As we're about to remove the of_node field from the irqdomain
structure, introduce an accessor for it. Subsequent patches
will take care of the actual repainting.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Link: http://lkml.kernel.org/r/1444402211-1141-1-git-send-email-marc.zyngier@arm.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
A recent cleanup removed the 'irq' parameter from many functions, but
left the documentation for this in place for at least one function.
This removes it.
Fixes: bd0b9ac405 ("genirq: Remove irq argument from irq flow handlers")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Grygorii Strashko <grygorii.strashko@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: kbuild-all@01.org
Cc: Austin Schuh <austin@peloton-tech.com>
Cc: Santosh Shilimkar <ssantosh@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/5400000.cD19rmgWjV@wuerfel
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
A cleanup of the omap gpio driver introduced a use of the
handle_bad_irq() function in a device driver that can be
a loadable module.
This broke the ARM allmodconfig build:
ERROR: "handle_bad_irq" [drivers/gpio/gpio-omap.ko] undefined!
This patch exports the handle_bad_irq symbol in order to
allow the use in modules.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Grygorii Strashko <grygorii.strashko@ti.com>
Cc: Santosh Shilimkar <ssantosh@kernel.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Austin Schuh <austin@peloton-tech.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/5847725.4IBopItaOr@wuerfel
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The cleaner policy doesn't make use of the per cache block hint space in
the metadata (unlike the other policies). When switching from the
cleaner policy to mq or smq a NULL pointer crash (in dm_tm_new_block)
was observed. The crash was caused by bugs in dm-cache-metadata.c
when trying to skip creation of the hint btree.
The minimal fix is to change hint size for the cleaner policy to 4 bytes
(only hint size supported).
Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Cc: stable@vger.kernel.org
The commit 55ce74d4bf (md/raid1: ensure
device failure recorded before write request returns) is causing crash in
the LVM2 testsuite test shell/lvchange-raid.sh. For me the crash is 100%
reproducible.
The reason for the crash is that the newly added code in raid1d moves the
list from conf->bio_end_io_list to tmp, then tests if tmp is non-empty and
then incorrectly pops the bio from conf->bio_end_io_list (which is empty
because the list was alrady moved).
Raid-10 has a similar bug.
Kernel Fault: Code=15 regs=000000006ccb8640 (Addr=0000000100000000)
CPU: 3 PID: 1930 Comm: mdX_raid1 Not tainted 4.2.0-rc5-bisect+ #35
task: 000000006cc1f258 ti: 000000006ccb8000 task.ti: 000000006ccb8000
YZrvWESTHLNXBCVMcbcbcbcbOGFRQPDI
PSW: 00001000000001001111111000001111 Not tainted
r00-03 000000ff0804fe0f 000000001059d000 000000001059f818 000000007f16be38
r04-07 000000001059d000 000000007f16be08 0000000000200200 0000000000000001
r08-11 000000006ccb8260 000000007b7934d0 0000000000000001 0000000000000000
r12-15 000000004056f320 0000000000000000 0000000000013dd0 0000000000000000
r16-19 00000000f0d00ae0 0000000000000000 0000000000000000 0000000000000001
r20-23 000000000800000f 0000000042200390 0000000000000000 0000000000000000
r24-27 0000000000000001 000000000800000f 000000007f16be08 000000001059d000
r28-31 0000000100000000 000000006ccb8560 000000006ccb8640 0000000000000000
sr00-03 0000000000249800 0000000000000000 0000000000000000 0000000000249800
sr04-07 0000000000000000 0000000000000000 0000000000000000 0000000000000000
IASQ: 0000000000000000 0000000000000000 IAOQ: 000000001059f61c 000000001059f620
IIR: 0f8010c6 ISR: 0000000000000000 IOR: 0000000100000000
CPU: 3 CR30: 000000006ccb8000 CR31: 0000000000000000
ORIG_R28: 000000001059d000
IAOQ[0]: call_bio_endio+0x34/0x1a8 [raid1]
IAOQ[1]: call_bio_endio+0x38/0x1a8 [raid1]
RP(r2): raid_end_bio_io+0x88/0x168 [raid1]
Backtrace:
[<000000001059f818>] raid_end_bio_io+0x88/0x168 [raid1]
[<00000000105a4f64>] raid1d+0x144/0x1640 [raid1]
[<000000004017fd5c>] kthread+0x144/0x160
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Fixes: 55ce74d4bf ("md/raid1: ensure device failure recorded before write request returns.")
Fixes: 95af587e95 ("md/raid10: ensure device failure recorded before write request returns.")
Signed-off-by: NeilBrown <neilb@suse.com>
When scaling_available_frequencies is read on an offlined cpu, then
either lockup or junk values are displayed. This is caused by
freed freq_table, which policy is using.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The Atmel sdhci device needs the
SDHCI_QUIRK2_NEED_DELAY_AFTER_INT_CLK_RST quirk. Without it, the
internal clock could never stabilised when changing the sd clock
frequency.
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The Atmel sdhci device needs a new quirk. sdhci_set_clock set the Clock
Control Register to 0 before computing the new value and writing it.
It disables the internal clock which causes a reset mecanism. If we
write the new value before this reset mecanism is done, it will prevent
the stabilisation of the internal clock, so a delay is needed. This
delay is about 2-3 cycles of the base clock. To be safe, a 1 ms delay is
used.
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
In case of armada_38x_quirks error, all clocks should be cleaned-up, same
as after mv_conf_mbus_windows failure.
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Cc: <stable@vger.kernel.org> # v4.2
Reviewed-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
According to 'FE-2946959' erratum the clock inversion option is
needed to support slow frequencies when the card input hold time
requirement is high. This setting is not required for high speed
MMC and might cause timing violation.
Signed-off-by: Nadav Haklai <nadavh@marvell.com>
Cc: <stable@vger.kernel.org> # v4.2
Reviewed-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
shci-pxav3 driver is enabling by default the
SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN quirk. However this quirk is not
required for Armada 38x and leads to wrong clock setting in the divider.
Signed-off-by: Nadav Haklai <nadavh@marvell.com>
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Cc: <stable@vger.kernel.org> # v4.2
Reviewed-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
For some reason, only the little-endian flavor of
powerpc provided the zero_bytemask() implementation.
Reported-by: Michal Sojka <sojkam1@fel.cvut.cz>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Chris Metcalf <cmetcalf@ezchip.com>
Starting with commit 7d607f9170 ("mmc: host: omap_hsmmc: use
devm_regulator_get_optional() for vmmc") MMC on omap3 stopped working
for legacy booting.
This is because legacy booting sets up some of the resource in the
platform init code, and for optional regulators always seem to
return -EPROBE_DEFER for the legacy booting.
Let's fix the issue by checking for device tree based booting for
now. Then when omap3 boots in device tree only mode, this patch
can be just reverted.
Fixes: 7d607f9170 ("mmc: host: omap_hsmmc: use
devm_regulator_get_optional() for vmmc")
Cc: Felipe Balbi <balbi@ti.com>
Cc: Kishon Vijay Abraham I <kishon@ti.com>
Cc: Nishanth Menon <nm@ti.com>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Tested-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
This reverts commit c55d7a0553.
Without reverting this commit we get "unbalanced disables for pbias_mmc_omap4"
errors on omap4430. It seems that 4430 and 4460 behave in a different way for
the PBIAS regulator registers and until that has been debugged further we
cannot rely on the regulator status registers in hardare on 4430.
Fixes: 7d607f9170 ("mmc: host: omap_hsmmc: use
devm_regulator_get_optional() for vmmc")
Cc: Felipe Balbi <balbi@ti.com>
Cc: Kishon Vijay Abraham I <kishon@ti.com>
Cc: Nishanth Menon <nm@ti.com>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Tested-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Most distributions end up enabling SWIOTLB already with 32-bit
kernels due to the combination of CONFIG_HYPERVISOR_GUEST|CONFIG_XEN=y
as those end up requiring the SWIOTLB.
However for those that are not interested in virtualization and
run in 32-bit they will discover that: "32-bit PAE 4.2.0 kernel
(no IOMMU code) would hang when writing to my USB disk. The kernel
spews million(-ish messages per sec) to syslog, effectively
"hanging" userspace with my kernel.
Oct 2 14:33:06 voodoochild kernel: [ 223.287447] nommu_map_sg:
overflow 25dcac000+1024 of device mask ffffffff
Oct 2 14:33:06 voodoochild kernel: [ 223.287448] nommu_map_sg:
overflow 25dcac000+1024 of device mask ffffffff
Oct 2 14:33:06 voodoochild kernel: [ 223.287449] nommu_map_sg:
overflow 25dcac000+1024 of device mask ffffffff
... etc ..."
Enabling it makes the problem go away.
N.B. With a6dfa128ce
"config: Enable NEED_DMA_MAP_STATE by default when SWIOTLB is selected"
we also have the important part of the SG macros enabled to make this
work properly - in case anybody wants to backport this patch.
Reported-and-Tested-by: Christian Melki <christian.melki@t2data.com>
Signed-off-by: Christian Melki <christian.melki@t2data.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Quite a few fixes here but they're all very small and driver specific,
none of them really stand out if you aren't using the relevant hardware
but they're all useful if you do happen to have an affected device.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJWFTcnAAoJECTWi3JdVIfQATYH+wSTTl5PecusiHmrb3kS08V7
Ka7EgqP+PyPRh4QxqxA+fBQJOcbiD42I1FzYyj16INmaDP10AE2fNc/Q1xSmFVRd
6iJl7mKlJqNgYmORWFynlrnrPVipJIBmS5SXt9z3GeRo6jhJk5G3UiJkA+WkKzDN
r+3ASeEdZHeLKj5zeAPsY0KTMOaBskpSVFer5g7kQE5+naYFOzXJ4NsivjML2cge
TH/8Ef22oJi8FNtfFCnz8hTMKFo0mnBYbjmZZcwhj0/Ne0yeJhE0VOaZroaS2Ec2
VjvKcA5pWPAAbsZtjO1A2x35V3oy5T4N8HsiQfvuJ5+6rSNpsJ2V8qXCSl7RTCw=
=4n+5
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v4.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v4.3
Quite a few fixes here but they're all very small and driver specific,
none of them really stand out if you aren't using the relevant hardware
but they're all useful if you do happen to have an affected device.
3w controller don't dma map small single SGL entry commands but instead
bounce buffer them. Add a helper to identify these commands and don't
call scsi_dma_unmap for them.
Based on an earlier patch from James Bottomley.
Fixes: 118c85 ("3w-9xxx: fix command completion race")
Reported-by: Tóth Attila <atoth@atoth.sote.hu>
Tested-by: Tóth Attila <atoth@atoth.sote.hu>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Adam Radford <aradford@gmail.com>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
- A couple of locking fixes for RT kernels
- Avoid printing bogus initrd warnings when initrd isn't present
- Performance fix for random mmap file readahead
- Typo fix
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABCgAGBQJWFO+aAAoJELescNyEwWM0z14IALpleyenZXl+xqxMjNyOXouG
/2SbTZH7iD/vnfCL6G7/Poq00I2ghtBSRFGXajfg7V0mjH1HTfVXVN19IXaUUwjW
IfAMqSyC43dDBdsGn3A1ZqPRNk+chxjwz7zimGqPowuM87C4aj/sqetBSnuybZtB
lSYfCFGpDj8cpsJ0xwYYhuq8xUgixQMslTj+rVAFtfsLkDHUu175l+vP7t2xOv5v
bmyPlz15O/v9febnLYFVFPWZB2IWfvaFkR30qUGsMe6BGWdGDe/RGUPksZDLlPdL
Yj4AKq+9Bx0lPvO+vNEqfvScKdVjMpttVEMfi2cQ8kUbD1rRPZ7ZTHsfcEOuB1w=
=Zi+I
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"This addresses a couple of issues found with RT, a broken initrd
message in the console log and a simple performance fix for some MMC
workloads.
Summary:
- A couple of locking fixes for RT kernels
- Avoid printing bogus initrd warnings when initrd isn't present
- Performance fix for random mmap file readahead
- Typo fix"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: replace read_lock to rcu lock in call_break_hook
arm64: Don't relocate non-existent initrd
arm64: convert patch_lock to raw lock
arm64: readahead: fault retry breaks mmap file read random detection
arm64: debug: Fix typo in debug-monitors.c
* fbdev: Minor fixes to broadsheetfb, fsl-diu-fb, mb862xxfb, tridentfb, omapfb
* display-timing: Fix memory leak in error path
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=hZoA
-----END PGP SIGNATURE-----
Merge tag 'fbdev-fixes-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux
Pull fbdev fixes from Tomi Valkeinen:
- fbdev: Minor fixes to broadsheetfb, fsl-diu-fb, mb862xxfb, tridentfb,
omapfb
- display-timing: Fix memory leak in error path
* tag 'fbdev-fixes-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux:
video: of: fix memory leak
fbdev: broadsheetfb: fix memory leak
OMAPDSS: panel-sony-acx565akm: Export OF module alias information
fbdev: omap2: connector-dvi: use of_get_i2c_adapter_by_node interface
tridentfb: Fix set_lwidth on TGUI9440 and CYBER9320
tridentfb: fix hang on Blade3D with CONFIG_CC_OPTIMIZE_FOR_SIZE
video: fbdev: mb862xx: Fix module autoload for OF platform driver
video: fbdev: fsl: Fix the sleep function for FSL DIU module
- Fix build break on (at least) powerpc due to sample_reg_masks, not being
available for linking (Sukadev Bhattiprolu)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=Dr5G
-----END PGP SIGNATURE-----
Merge tag 'perf-urgent-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent
Pull perf/urgent fix from Arnaldo Carvalho de Melo:
- Fix build break on (at least) powerpc due to sample_reg_masks, not being
available for linking. (Sukadev Bhattiprolu)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
perf_regs.c does not get built on Powerpc as CONFIG_PERF_REGS is false.
So the weak definition for 'sample_regs_masks' doesn't get picked up.
Adding perf_regs.o to util/Build unconditionally, exposes a redefinition
error for 'perf_reg_value()' function (due to the static inline version
in util/perf_regs.h). So use #ifdef HAVE_PERF_REGS_SUPPORT' around that
function.
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: linuxppc-dev@ozlabs.org
Link: http://lkml.kernel.org/r/20150930182836.GA27858@us.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
A couple of fixes for the debugfs information on the register map,
fixing issues with very small reads potentially causing underflows and
wraparounds.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJWFPtTAAoJECTWi3JdVIfQlRUH/1j/cFl0+eDBnjQjg25+bMOn
HhGQtxcGlOXIwDzRc7vCzuH8RjqJnY6jLlYzAjbYiIEoRAHVOEtWZCeSMN8bTfaK
lUe2XN6TLrAweJYP+LC+NoIXKzW4jUDXG3ZqhkRllsnn9eoLsIFBxBV+E5jS4LNo
8AFMfdlzbKaEIrAu9w6c5pHmgwacyXETOKej+GuJ/RP6a5SRPAS1FWCznLc8gY7n
NBh+vMeYdtRV57PpXxVa/sAFjqkglwXhf4C7Gkhcv5Ecu4utf5LqL3w9i5Al5Rmz
5DxO3JaFdK4ae74wdo8iCFddXJBu+TiB9UB6mvhrZ63W8ECw3xjcE4PcYuL3BN0=
=QeA5
-----END PGP SIGNATURE-----
Merge tag 'regmap-fix-v4.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap fixes from Mark Brown:
"A couple of fixes for the debugfs information on the register map,
fixing issues with very small reads potentially causing underflows and
wraparounds"
* tag 'regmap-fix-v4.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: debugfs: Don't bother actually printing when calculating max length
regmap: debugfs: Ensure we don't underflow when printing access masks
A couple of very minor fixes, one for error handling in the Davinci
driver probe function and another making the Renesas sh-msiof DT binding
documentation correspond to what's actually implemented.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJWFPjZAAoJECTWi3JdVIfQvWcH/0aOEA6dcgurWr4IlWpI9vS0
ueMrT3CEDwyJOhkizxMTQSDs7K01OGOag1Dq6nZm2k38niFD7CeUU6iNXZrKoTXf
TSBiqgRitZ5HnpYJhYz/HP8HTktAZVuFaTD2IpSX6+gqiTinIYKVX4MrnZmIcRjR
uGXosAd2n3552hXjcDVOuRlmvjmd30wP96/hc0/24yfrehEcBoksM4dgnpMDC5d4
OQaP6Y8ZXkqeYYrL+xN4i6w9wwTdt+Io+7cYZoRVKJ3+CB9jHAnONRJzTPqRWEDz
vhOA2/fHmvLierP1JySz1CZzYdVekVpPYsobmsYHKddoLXBLvlaYWJajj1kTMlc=
=RMP1
-----END PGP SIGNATURE-----
Merge tag 'spi-fix-v4.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A couple of very minor fixes, one for error handling in the Davinci
driver probe function and another making the Renesas sh-msiof DT
binding documentation correspond to what's actually implemented"
* tag 'spi-fix-v4.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: sh-msiof: Match renesas,rx-fifo-size in DT bindings doc with driver
spi: davinci: fix handling platform_get_irq result
Two fixes here, one device specific fix for axp20x and a core fix for
cases where one regulator is supplying another which broke probe
deferral, substituting in a dummy regulator too aggressively.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJWFO2YAAoJECTWi3JdVIfQl6YH/iBuGvFaDNJn6qBI1/qae9KO
HQYWda7fVKB8l/4aotV4tfzW0ikIDMeIzSzvekpZK6SKgVnKAr3dzKLL3tkDT9IE
tl5ibs5nJOynGk30liVSALfUFU2IPqV0ikNQxbhBq13mIR9YJinFuow8kcCAWoSj
BJUIE/cp6fHoDXWMqJDETCBtwERBmU7VZ6WWhaZZKTrmMzM0zdfNyjisrOTx+Npm
k2+4zAs8ep7MCn0Q9V4Q+DdNOq3zZPcMjx6yMLZt71pJBiG+TP/wK89AIAq7vyjk
y5qUqdFBN/4cvtmLCLI4F9lThSBgRHLSl1NOJc9TWQgu/xT8YEmK2xqE9J+cyLQ=
=xZTQ
-----END PGP SIGNATURE-----
Merge tag 'regulator-fix-v4.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"Two fixes here, one device specific fix for axp20x and a core fix for
cases where one regulator is supplying another which broke probe
deferral, substituting in a dummy regulator too aggressively"
* tag 'regulator-fix-v4.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: core: Handle probe deferral from DT when resolving supplies
regulator: axp20x: Fix enable bit indexes for DCDC4 and DCDC5
If of_parse_display_timing() fails we are printing an error message and
jumping to the error path but we missed freeing "dt".
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
