Impact: cleanup
Clean up all the target_cpus() namespace overlap that exists
between bigsmp, es7000, mach-default, numaq and summit - by
separating the different functions into different names.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Remove the wrapper macros IRQ_DEST_MODE and IRQ_DELIVERY_MODE.
The typical 32-bit and the 64-bit build all dereference via the genapic,
so it's pointless to hide that indirection via these ugly macros.
Furthermore, it also obscures subarchitecture details.
So replace it with apic->irq_dest_mode / etc. accesses.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
int_delivery_mode is supposed to mean 'interrupt delivery mode', but
it's quite a misnomer as 'int' we usually think of as an integer type ...
The standard naming for such attributes is 'irq' - so rename the following
fields and macros:
int_delivery_mode => irq_delivery_mode
INT_DELIVERY_MODE => IRQ_DELIVERY_MODE
int_dest_mode => irq_dest_mode
INT_DEST_MODE => IRQ_DEST_MODE
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup
x86 subarchitectures each defined a "apic_id_registered()" method,
which could be an inline function depending on which subarch we build
for, and which was also the name of a genapic field.
Untangle this namespace spaghetti by giving each of the instances
a separate name.
Also remove wrapper macro obfuscation.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: refactor code
x86 subarchitectures each defined a "acpi_madt_oem_check()" method,
which could be an inline function, or an extern, or a static function,
and which was also the name of a genapic field.
Untangle this namespace spaghetti by setting ->acpi_madt_oem_check()
to NULL on those subarchitectures that have no detection quirks,
and rename the other ones (summit, es7000) that do.
Also change default_acpi_madt_oem_check() to handle NULL entries,
and clean its control flow up as well.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The APIC_INIT() / APICFUNC / IPIFUNC macros were ugly and obfuscated
the true identity of various APIC driver methods.
Now that they are not used anymore, remove them.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Clean up the APIC driver template:
- order fields properly
- use the macro names explicitly (so that they can be renamed later)
- fill in NULL entries as well
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Clean up the APIC driver template:
- order fields properly
- use the macro names explicitly (so that they can be renamed later)
- fill in NULL entries as well
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Clean up the APIC driver template:
- order fields properly
- use the macro names explicitly (so that they can be renamed later)
- fill in NULL entries as well
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Clean up the APIC driver template:
- order fields properly
- use the macro names explicitly (so that they can be renamed later)
- fill in NULL entries as well
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Clean up the APIC driver template:
- order fields properly
- use the macro names explicitly (so that they can be renamed later)
- fill in NULL entries as well
Signed-off-by: Ingo Molnar <mingo@elte.hu>
- reorder fields so that they appear in struct genapic field ordering
- add zero-initialized fields too so that it's apparent which functionality
is default / missing.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
- reorder fields so that they appear in struct genapic field ordering
- add zero-initialized fields too so that it's apparent which functionality
is default / missing.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
- reorder fields so that they appear in struct genapic field ordering
- add zero-initialized fields too so that it's apparent which functionality
is default / missing.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
- reorder fields so that they appear in struct genapic field ordering
- add zero-initialized fields too so that it's apparent which functionality
is default / missing.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
- reorder fields so that they appear in struct genapic field ordering
- add zero-initialized fields too so that it's apparent which functionality
is default / missing.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Rename genapic-> to apic-> references because in a future chagne we'll
open-code all the indirect calls (instead of obscuring them via macros),
so we want this reference to be as short as possible.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: pre unification cleanup
Make genapic_32.h similar to genapic_64.h: reorder fields, unify types
and bring in new entries.
No existing functionality is affected.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: pre unification cleanup
Make genapic_64.h similar to genapic_32.h: reorder fields, unify types
and bring in new entries.
No existing functionality is affected.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
After btrfs_readdir has gone through all the directory items, it
sets the directory f_pos to the largest possible int. This way
applications that mix readdir with creating new files don't
end up in an endless loop finding the new directory items as they go.
It was a workaround for a bug in git, but the assumption was that if git
could make this looping mistake than it would be a common problem.
The largest possible int chosen was INT_LIMIT(typeof(file->f_pos),
and it is possible for that to be a larger number than 32 bit glibc
expects to come out of readdir.
This patches switches that to INT_LIMIT(off_t), which should keep
applications happy on 32 and 64 bit machines.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Reported-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
who also provided a first version of the fix.
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
1394-2008 clause 16.3.4.1 (1394b-2002 clause 16.3.1.1) defines tighter
limits than 1394-2008 clause 6.2.2.3 (1394a-2000 clause 6.2.2.3).
Our previously too large limit doesn't matter though if the controller
reports its max_receive correctly.
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
This makes sbp2 behave more like firewire-sbp2 which reports 0xff000000
as immediate value if there are no unit directory entries for model_id
or firmware_revision.
It does not reduce matches with the currently existing quirks table; the
only zero entry there is for a device which actually does have a zero
model_id. It only changes how model_id and firmware_revision are logged
if they are missing.
Other functionally unrelated changes: The model_id member of quirks
list entries is renamed to model; the value (but not the effect) of
SBP2_ROM_VALUE_WILDCARD is changed. Now this part of the source is
identical with firewire-sbp2 for easier maintenance.
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
1394-2008 clause 16.3.4.1 (1394b-2002 clause 16.3.1.1) defines tighter
limits than 1394-2008 clause 6.2.2.3 (1394a-2000 clause 6.2.2.3).
Our previously too large limit doesn't matter though if the controller
reports its max_receive correctly.
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
The hard-wired configuration of the top speed (until now S800) was
unnecessary, remove it.
If the local link layer controller supports S1600 or S3200, we now
assume this speed for all present 1394b PHYs (except if they are
behind 1394a repeaters) until nodemgr figured out the actual speed
while fetching the config ROM.
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
PM1a_STS and PM1b_STS are twins that get OR'd together
on reads, and all writes are repeated to both.
The fields in PM1x_STS are single bits only,
there are no multi-bit fields.
So it is not necessary to lock PM1x_STS reads against
writes because it is impossible to read an intermediate
value of a single bit. It will either be 0 or 1,
even if a write is in progress during the read.
Reads are asynchronous to writes no matter if a lock
is used or not.
Signed-off-by: Len Brown <len.brown@intel.com>
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
powerpc/mm: Fix handling of _PAGE_COHERENT in BAT setup code
powerpc/pseries: Correct VIO bus accounting problem in CMO env.
powerpc: More printing warning fixes for the l64 to ll64 conversion
powerpc: Remove arch/ppc cruft from Kconfig
powerpc: Printing fix for l64 to ll64 conversion: phyp_dump.c
powerpc/embedded6xx: Update defconfigs
powerpc/8xx: Update defconfigs
powerpc/86xx: Update defconfigs
powerpc/83xx: Update defconfigs
powerpc/85xx: Update defconfigs
powerpc/mpc8313erdb: fix kernel panic because mdio device is not probed
powerpc/4xx: Update multi-board PowerPC 4xx defconfigs
powerpc/44x: Update PowerPC 44x defconfigs
powerpc/40x: Update PowerPC 40x defconfigs
powerpc/85xx: Fix typo in mpc8572ds dts
powerpc/44x: Warp patches for the new NDFC driver
powerpc/4xx: DTS: Add Add'l SDRAM0 Compatible and Interrupt Info
When there are multiple L1-aliasing userland mappings of the same physical
page, we currently remap each of them uncached, to prevent VIVT cache
aliasing issues. (E.g. writes to one of the mappings not being immediately
visible via another mapping.) However, when we do this remapping, there
could still be stale data in the L2 cache, and an uncached mapping might
bypass L2 and go straight to RAM. This would cause reads from such
mappings to see old data (until the dirty L2 line is eventually evicted.)
This issue is solved by forcing a L2 cache flush whenever the shared page
is made L1 uncacheable.
Ideally, we would make L1 uncacheable and L2 cacheable as L2 is PIPT. But
Feroceon does not support that combination, and the TEX=5 C=0 B=0 encoding
for XSc3 doesn't appear to work in practice.
Signed-off-by: Nicolas Pitre <nico@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
m68knommu: fix 5329 ColdFire periphal addressing
uclinux: add process name to allocation error message
m68knommu: correct the mii calculations for 532x ColdFire FEC
m68knommu: add ColdFire M532x to the FEC configuration options
m68knommu: fix syscall restarting
m68knommu: remove the obsolete and long unused comempci chip support
m68knommu: remove the no longer used PCI support option
m68knommu: remove obsolete and unused eLIA board
m68knommu: set NO_DMA
m68knommu: fix cache flushing for the 527x ColdFire processors
m68knommu: fix ColdFire 5272 serial baud rates in mcf.c
m68knommu: use one exist from execption
Commit d7b1956fed ("DMI: Introduce
dmi_first_match to make the interface more flexible") introduced compile
errors like the following when !CONFIG_DMI
drivers/ata/sata_sil.c: In function 'sil_broken_system_poweroff':
drivers/ata/sata_sil.c:713: error: implicit declaration of function 'dmi_first_match'
drivers/ata/sata_sil.c:713: warning: initialization makes pointer from integer without a cast
We just need a dummy version of dmi_first_match() to fix this all up.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Schedule a vblank signal, kill the process, and we'll go walking over freed
memory. Given that no open-source userland exists using this, nor have I
ever heard of a consumer, just let this code die.
Signed-off-by: Eric Anholt <eric@anholt.net>
Requested-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Dave Airlie <airlied@linux.ie>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The function to traverse and dirty the LPT was still not
dirtying all nodes, with the result that the LPT could
run out of space.
Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Aaro says:
> With spinlock debugs enabled I get might_sleep() warnings when using
> ptrace.
tracked down to a missing enable_irq before calling do_undefinstr().
Reported-by: Aaro Koskinen <aaro.koskinen@nokia.com>
Tested-by: Aaro Koskinen <aaro.koskinen@nokia.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
arch/arm/mach-msm/board-halibut.c:45: error: implicit declaration of function 'MSM_GPIO_TO_INT'
arch/arm/mach-msm/board-halibut.c:45: error: initializer element is not constant
arch/arm/mach-msm/board-halibut.c:45: error: (near initialization for 'smc91x_resources[1].start')
arch/arm/mach-msm/board-halibut.c:46: error: initializer element is not constant
arch/arm/mach-msm/board-halibut.c:46: error: (near initialization for 'smc91x_resources[1].end')
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
