No need to use CONFIG_SMP around update_cr16_clocksource(). It checks for
num_online_cpus() beeing greater than 1, which is always 1 in UP builds.
Signed-off-by: Helge Deller <deller@gmx.de>
Instead of using physical addresses for accounting of extra memory
areas available for ballooning switch to pfns as this is much less
error prone regarding partial pages.
Reported-by: Roger Pau Monné <roger.pau@citrix.com>
Tested-by: Roger Pau Monné <roger.pau@citrix.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
When a pv-domain (including dom0) is started it tries to size it's
p2m list according to the maximum possible memory amount it ever can
achieve. Limit the initial maximum memory size to the architectural
limit of the hardware in order to avoid overflows during remapping
of memory.
This problem will occur when dom0 is started with an initial memory
size being a multiple of 1GB, but without specifying it's maximum
memory size. The kernel must be configured without
CONFIG_XEN_BALLOON_MEMORY_HOTPLUG for the problem to happen.
Reported-by: Roger Pau Monné <roger.pau@citrix.com>
Tested-by: Roger Pau Monné <roger.pau@citrix.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Commit b1c9f169047b ("xen: split counting of extra memory pages...")
introduced an error when dom0 was started with limited memory occurring
only on some hardware.
The problem arises in case dom0 is started with initial memory and
maximum memory being the same. The kernel must be configured without
CONFIG_XEN_BALLOON_MEMORY_HOTPLUG for the problem to happen. If all
of this is true and the E820 map of the machine is sparse (some areas
are not covered) then the machine might crash early in the boot
process.
An example E820 map triggering the problem looks like this:
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cf7fafff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cf7fb000-0x00000000cf95ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000cf960000-0x00000000cfb62fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000cfb63000-0x00000000cfd14fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cfd15000-0x00000000cfd61fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000cfd62000-0x00000000cfd6cfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000cfd6d000-0x00000000cfd6ffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000cfd70000-0x00000000cfd70fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cfd71000-0x00000000cfea8fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000cfea9000-0x00000000cfeb9fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000cfeba000-0x00000000cfecafff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000cfecb000-0x00000000cfecbfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000cfecc000-0x00000000cfedbfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000cfedc000-0x00000000cfedcfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000cfedd000-0x00000000cfeddfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000cfede000-0x00000000cfee3fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000cfee4000-0x00000000cfef6fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000cfef7000-0x00000000cfefffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed61000-0x00000000fed70fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100001000-0x000000020effffff] usable
In this case the area a0000-dffff isn't present in the map. This will
confuse the memory setup of the domain when remapping the memory from
such holes to populated areas.
To avoid the problem the accounting of to be remapped memory has to
count such holes in the E820 map as well.
Reported-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Commit b1c9f169047b ("xen: split counting of extra memory pages...")
introduced an error when dom0 was started with limited memory.
The problem arises in case dom0 is started with initial memory and
maximum memory being the same and exactly a multiple of 1 GB. The
kernel must be configured without CONFIG_XEN_BALLOON_MEMORY_HOTPLUG
for the problem to happen. In this case it will crash very early
during boot due to the virtual mapped p2m list not being large
enough to be able to remap any memory:
(XEN) Freed 304kB init memory.
mapping kernel into physical memory
about to get started...
(XEN) traps.c:459:d0v0 Unhandled invalid opcode fault/trap [#6] on VCPU 0 [ec=0000]
(XEN) domain_crash_sync called from entry.S: fault at ffff82d080229a93 create_bounce_frame+0x12b/0x13a
(XEN) Domain 0 (vcpu#0) crashed on cpu#0:
(XEN) ----[ Xen-4.5.2-pre x86_64 debug=n Not tainted ]----
(XEN) CPU: 0
(XEN) RIP: e033:[<ffffffff81d120cb>]
(XEN) RFLAGS: 0000000000000206 EM: 1 CONTEXT: pv guest (d0v0)
(XEN) rax: ffffffff81db2000 rbx: 000000004d000000 rcx: 0000000000000000
(XEN) rdx: 000000004d000000 rsi: 0000000000063000 rdi: 000000004d063000
(XEN) rbp: ffffffff81c03d78 rsp: ffffffff81c03d28 r8: 0000000000023000
(XEN) r9: 00000001040ff000 r10: 0000000000007ff0 r11: 0000000000000000
(XEN) r12: 0000000000063000 r13: 000000000004d000 r14: 0000000000000063
(XEN) r15: 0000000000000063 cr0: 0000000080050033 cr4: 00000000000006f0
(XEN) cr3: 0000000105c0f000 cr2: ffffc90000268000
(XEN) ds: 0000 es: 0000 fs: 0000 gs: 0000 ss: e02b cs: e033
(XEN) Guest stack trace from rsp=ffffffff81c03d28:
(XEN) 0000000000000000 0000000000000000 ffffffff81d120cb 000000010000e030
(XEN) 0000000000010006 ffffffff81c03d68 000000000000e02b ffffffffffffffff
(XEN) 0000000000000063 000000000004d063 ffffffff81c03de8 ffffffff81d130a7
(XEN) ffffffff81c03de8 000000000004d000 00000001040ff000 0000000000105db1
(XEN) 00000001040ff001 000000000004d062 ffff8800092d6ff8 0000000002027000
(XEN) ffff8800094d8340 ffff8800092d6ff8 00003ffffffff000 ffff8800092d7ff8
(XEN) ffffffff81c03e48 ffffffff81d13c43 ffff8800094d8000 ffff8800094d9000
(XEN) 0000000000000000 ffff8800092d6000 00000000092d6000 000000004cfbf000
(XEN) 00000000092d6000 00000000052d5442 0000000000000000 0000000000000000
(XEN) ffffffff81c03ed8 ffffffff81d185c1 0000000000000000 0000000000000000
(XEN) ffffffff81c03e78 ffffffff810f8ca4 ffffffff81c03ed8 ffffffff8171a15d
(XEN) 0000000000000010 ffffffff81c03ee8 0000000000000000 0000000000000000
(XEN) ffffffff81f0e402 ffffffffffffffff ffffffff81dae900 0000000000000000
(XEN) 0000000000000000 0000000000000000 ffffffff81c03f28 ffffffff81d0cf0f
(XEN) 0000000000000000 0000000000000000 0000000000000000 ffffffff81db82e0
(XEN) 0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN) ffffffff81c03f38 ffffffff81d0c603 ffffffff81c03ff8 ffffffff81d11c86
(XEN) 0300000100000032 0000000000000005 0000000000000020 0000000000000000
(XEN) 0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN) 0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN) Domain 0 crashed: rebooting machine in 5 seconds.
This can be avoided by allocating aneough space for the p2m to cover
the maximum memory of dom0 plus the identity mapped holes required
for PCI space, BIOS etc.
Reported-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
The attached change fixes the condition used in the "sub" instruction.
A double word comparison is needed. This fixes the 64-bit LWS CAS
operation on 64-bit kernels.
I can now enable 64-bit atomic support in GCC.
Cc: <stable@vger.kernel.org>
Signed-off-by: John David Anglin <dave.anglin>
Signed-off-by: Helge Deller <deller@gmx.de>
When detecting a serial port on newer PA-RISC machines (with iosapic) we have a
long way to go to find the right IRQ line, registering it, then registering the
serial port and the irq handler for the serial port. During this phase spurious
interrupts for the serial port may happen which then crashes the kernel because
the action handler might not have been set up yet.
So, basically it's a race condition between the serial port hardware and the
CPU which sets up the necessary fields in the irq sructs. The main reason for
this race is, that we unmask the serial port irqs too early without having set
up everything properly before (which isn't easily possible because we need the
IRQ number to register the serial ports).
This patch is a work-around for this problem. It adds checks to the CPU irq
handler to verify if the IRQ action field has been initialized already. If not,
we just skip this interrupt (which isn't critical for a serial port at bootup).
The real fix would probably involve rewriting all PA-RISC specific IRQ code
(for CPU, IOSAPIC, GSC and EISA) to use IRQ domains with proper parenting of
the irq chips and proper irq enabling along this line.
This bug has been in the PA-RISC port since the beginning, but the crashes
happened very rarely with currently used hardware. But on the latest machine
which I bought (a C8000 workstation), which uses the fastest CPUs (4 x PA8900,
1GHz) and which has the largest possible L1 cache size (64MB each), the kernel
crashed at every boot because of this race. So, without this patch the machine
would currently be unuseable.
For the record, here is the flow logic:
1. serial_init_chip() in 8250_gsc.c calls iosapic_serial_irq().
2. iosapic_serial_irq() calls txn_alloc_irq() to find the irq.
3. iosapic_serial_irq() calls cpu_claim_irq() to register the CPU irq
4. cpu_claim_irq() unmasks the CPU irq (which it shouldn't!)
5. serial_init_chip() then registers the 8250 port.
Problems:
- In step 4 the CPU irq shouldn't have been registered yet, but after step 5
- If serial irq happens between 4 and 5 have finished, the kernel will crash
Signed-off-by: Helge Deller <deller@gmx.de>
Craig Estey noticed that we didn't checked for in_atomic() in our page fault
handler like other architectures. This commit adds this check by using
faulthandler_disabled() which includes a check for pagefault_disabled() and
in_atomic().
Reported-by: Craig Estey <cae370@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Commit 3cc2dac5be ("drivers/video/fbdev/atyfb: Replace MTRR UC hole
with strong UC") introduces calls to ioremap_wc and ioremap_uc. This
causes build failures with parisc:allmodconfig. Map the missing
functions to ioremap_nocache.
Fixes: 3cc2dac5be ("drivers/video/fbdev/atyfb:
Replace MTRR UC hole with strong UC")
Cc: Luis R. Rodriguez <mcgrof@suse.com>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Helge Deller <deller@gmx.de>
Max10 is a FPGA device. This patch adds defconfig based on Max10 hardware
reference design. Design is intended to run on Max10 development kit.
Signed-off-by: Chee Nouk Phoon <cnphoon@altera.com>
Signed-off-by: Ley Foon Tan <lftan@altera.com>
Max10 is a FPGA device. This patch adds Nios2 support for Max10.
This device tree is based on Max10 hardware reference design.
Signed-off-by: Chee Nouk Phoon <cnphoon@altera.com>
Signed-off-by: Ley Foon Tan <lftan@altera.com>
Commit f32393c943 ("powerpc/pseries: Correct cpu affinity for
dlpar added cpus") moved dlpar_acquire_drc() call to before
dlpar_configure_connector() call in dlpar_cpu_probe(), but missed
to release the DRC if dlpar_configure_connector() failed.
During CPU hotplug, if configure-connector fails for any reason,
then this will result in subsequent CPU hotplug attempts to fail.
Release the acquired DRC if dlpar_configure_connector() call fails
so that the DRC is left in right isolation and allocation state
for the subsequent hotplug operation to succeed.
Fixes: f32393c943 ("powerpc/pseries: Correct cpu affinity for dlpar added cpus")
Cc: stable@vger.kernel.org # 4.1+
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Removed some statistic counters to improve the performance of the handler.
Signed-off-by: Bernd Weiberg <bernd.weiberg@siemens.com>
Signed-off-by: Ley Foon Tan <lftan@altera.com>
Migrate nios2 driver to the new 'set-state' interface provided by clockevents core, the earlier 'set-mode' interface is marked obsolete now.
This also enables us to implement callbacks for new states of clockevent devices, for example: ONESHOT_STOPPED.
Cc: Ley Foon Tan <lftan@altera.com>
Cc: Tobias Klauser <tklauser@distanz.ch>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Dmitry Torokhov <dtor@chromium.org>
Cc: nios2-dev@lists.rocketboards.org
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Ley Foon Tan <lftan@altera.com>
While working on the 32-bit ARM port of UEFI, I noticed a strange
corruption in the kernel log. The following snprintf() statement
(in drivers/firmware/efi/efi.c:efi_md_typeattr_format())
snprintf(pos, size, "|%3s|%2s|%2s|%2s|%3s|%2s|%2s|%2s|%2s]",
was producing the following output in the log:
| | | | | |WB|WT|WC|UC]
| | | | | |WB|WT|WC|UC]
| | | | | |WB|WT|WC|UC]
|RUN| | | | |WB|WT|WC|UC]*
|RUN| | | | |WB|WT|WC|UC]*
| | | | | |WB|WT|WC|UC]
|RUN| | | | |WB|WT|WC|UC]*
| | | | | |WB|WT|WC|UC]
|RUN| | | | | | | |UC]
|RUN| | | | | | | |UC]
As it turns out, this is caused by incorrect code being emitted for
the string() function in lib/vsprintf.c. The following code
if (!(spec.flags & LEFT)) {
while (len < spec.field_width--) {
if (buf < end)
*buf = ' ';
++buf;
}
}
for (i = 0; i < len; ++i) {
if (buf < end)
*buf = *s;
++buf; ++s;
}
while (len < spec.field_width--) {
if (buf < end)
*buf = ' ';
++buf;
}
when called with len == 0, triggers an issue in the GCC SRA optimization
pass (Scalar Replacement of Aggregates), which handles promotion of signed
struct members incorrectly. This is a known but as yet unresolved issue.
(https://gcc.gnu.org/bugzilla/show_bug.cgi?id=65932). In this particular
case, it is causing the second while loop to be executed erroneously a
single time, causing the additional space characters to be printed.
So disable the optimization by passing -fno-ipa-sra.
Cc: <stable@vger.kernel.org>
Acked-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
The 32-bit TCE table initialization relies on the DMA window having a
size equal to a power of 2 (and checks for it explicitly). But
crashkernel= has no constraint that requires a power-of-2 be specified.
This causes the kdump kernel to fail to boot as none of the PCI devices
(including the disk controller) are successfully initialized.
After this change, the PCI devices successfully set up the 32-bit TCE
table and kdump succeeds.
Fixes: aca6913f55 ("powerpc/powernv/ioda2: Introduce helpers to allocate TCE pages")
Signed-off-by: Nishanth Aravamudan <nacc@linux.vnet.ibm.com>
Cc: stable@vger.kernel.org # 4.2
Tested-by: Jan Stancek <jstancek@redhat.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
When attempting to kdump with the 4.2 kernel, we see for each PCI
device:
pci 0003:01 : [PE# 000] Assign DMA32 space
pci 0003:01 : [PE# 000] Setting up 32-bit TCE table at 0..80000000
pci 0003:01 : [PE# 000] Failed to create 32-bit TCE table, err -22
PCI: Domain 0004 has 8 available 32-bit DMA segments
PCI: 4 PE# for a total weight of 70
pci 0004:01 : [PE# 002] Assign DMA32 space
pci 0004:01 : [PE# 002] Setting up 32-bit TCE table at 0..80000000
pci 0004:01 : [PE# 002] Failed to create 32-bit TCE table, err -22
pci 0004:0d : [PE# 005] Assign DMA32 space
pci 0004:0d : [PE# 005] Setting up 32-bit TCE table at 0..80000000
pci 0004:0d : [PE# 005] Failed to create 32-bit TCE table, err -22
pci 0004:0e : [PE# 006] Assign DMA32 space
pci 0004:0e : [PE# 006] Setting up 32-bit TCE table at 0..80000000
pci 0004:0e : [PE# 006] Failed to create 32-bit TCE table, err -22
pci 0004:10 : [PE# 008] Assign DMA32 space
pci 0004:10 : [PE# 008] Setting up 32-bit TCE table at 0..80000000
pci 0004:10 : [PE# 008] Failed to create 32-bit TCE table, err -22
and eventually the kdump kernel fails to boot as none of the PCI devices
(including the disk controller) are successfully initialized.
The EINVAL response is because the DMA window (the 2GB base window) is
larger than the kdump kernel's reserved memory (crashkernel=, in this
case specified to be 1024M). The check in question,
if ((window_size > memory_hotplug_max()) || !is_power_of_2(window_size))
is a valid sanity check for pnv_pci_ioda2_table_alloc_pages(), so adjust
the caller to pass in a smaller window size if our maximum memory value
is smaller than the DMA window.
After this change, the PCI devices successfully set up the 32-bit TCE
table and kdump succeeds.
The problem was seen on a Firestone machine originally.
Fixes: aca6913f55 ("powerpc/powernv/ioda2: Introduce helpers to allocate TCE pages")
Cc: stable@vger.kernel.org # 4.2
Signed-off-by: Nishanth Aravamudan <nacc@linux.vnet.ibm.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
[mpe: Coding style pedantry, use u64, change the indentation]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Compiler warning:
CC [M] arch/x86/kvm/emulate.o
arch/x86/kvm/emulate.c: In function "__do_insn_fetch_bytes":
arch/x86/kvm/emulate.c:814:9: warning: "linear" may be used uninitialized in this function [-Wmaybe-uninitialized]
GCC is smart enough to realize that the inlined __linearize may return before
setting the value of linear, but not smart enough to realize the same
X86EMU_CONTINUE blocks actual use of the value. However, the value of
'linear' can only be set to one value, so hoisting the one line of code
upwards makes GCC happy with the code.
Reported-by: Aruna Hewapathirane <aruna.hewapathirane@gmail.com>
Tested-by: Aruna Hewapathirane <aruna.hewapathirane@gmail.com>
Signed-off-by: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The process_smi_save_seg_64() function called only in the
process_smi_save_state_64() if the CONFIG_X86_64 is set. This
patch adds #ifdef CONFIG_X86_64 around process_smi_save_seg_64()
to prevent following warning message:
arch/x86/kvm/x86.c:5946:13: warning: ‘process_smi_save_seg_64’ defined but not used [-Wunused-function]
static void process_smi_save_seg_64(struct kvm_vcpu *vcpu, char *buf, int n)
^
Signed-off-by: Alexander Kuleshov <kuleshovmail@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This does not show up on all compiler versions, so it sneaked into the
first 4.3 pull request. The fix is to mimic the logic of the "print
sptes" loop in the "fill array" loop. Then leaf and root can be
both initialized unconditionally.
Note that "leaf" now points to the first unused element of the array,
not the last filled element.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Pull vfs updates from Al Viro:
"In this one:
- d_move fixes (Eric Biederman)
- UFS fixes (me; locking is mostly sane now, a bunch of bugs in error
handling ought to be fixed)
- switch of sb_writers to percpu rwsem (Oleg Nesterov)
- superblock scalability (Josef Bacik and Dave Chinner)
- swapon(2) race fix (Hugh Dickins)"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (65 commits)
vfs: Test for and handle paths that are unreachable from their mnt_root
dcache: Reduce the scope of i_lock in d_splice_alias
dcache: Handle escaped paths in prepend_path
mm: fix potential data race in SyS_swapon
inode: don't softlockup when evicting inodes
inode: rename i_wb_list to i_io_list
sync: serialise per-superblock sync operations
inode: convert inode_sb_list_lock to per-sb
inode: add hlist_fake to avoid the inode hash lock in evict
writeback: plug writeback at a high level
change sb_writers to use percpu_rw_semaphore
shift percpu_counter_destroy() into destroy_super_work()
percpu-rwsem: kill CONFIG_PERCPU_RWSEM
percpu-rwsem: introduce percpu_rwsem_release() and percpu_rwsem_acquire()
percpu-rwsem: introduce percpu_down_read_trylock()
document rwsem_release() in sb_wait_write()
fix the broken lockdep logic in __sb_start_write()
introduce __sb_writers_{acquired,release}() helpers
ufs_inode_get{frag,block}(): get rid of 'phys' argument
ufs_getfrag_block(): tidy up a bit
...
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=cIed
-----END PGP SIGNATURE-----
Merge tag 'media/v4.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- new DVB frontend drivers: ascot2e, cxd2841er, horus3a, lnbh25
- new HDMI capture driver: tc358743
- new driver for NetUP DVB new boards (netup_unidvb)
- IR support for DVBSky cards (smipcie-ir)
- Coda driver has gain macroblock tiling support
- Renesas R-Car gains JPEG codec driver
- new DVB platform driver for STi boards: c8sectpfe
- added documentation for the media core kABI to device-drivers DocBook
- lots of driver fixups, cleanups and improvements
* tag 'media/v4.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (297 commits)
[media] c8sectpfe: Remove select on undefined LIBELF_32
[media] i2c: fix platform_no_drv_owner.cocci warnings
[media] cx231xx: Use wake_up_interruptible() instead of wake_up_interruptible_nr()
[media] tc358743: only queue subdev notifications if devnode is set
[media] tc358743: add missing Kconfig dependency/select
[media] c8sectpfe: Use %pad to print 'dma_addr_t'
[media] DocBook media: Fix typo "the the" in xml files
[media] tc358743: make reset gpio optional
[media] tc358743: set direction of reset gpio using devm_gpiod_get
[media] dvbdev: document most of the functions/data structs
[media] dvb_frontend.h: document the struct dvb_frontend
[media] dvb-frontend.h: document struct dtv_frontend_properties
[media] dvb-frontend.h: document struct dvb_frontend_ops
[media] dvb: Use DVBFE_ALGO_HW where applicable
[media] dvb_frontend.h: document struct analog_demod_ops
[media] dvb_frontend.h: Document struct dvb_tuner_ops
[media] Docbook: Document struct analog_parameters
[media] dvb_frontend.h: get rid of dvbfe_modcod
[media] add documentation for struct dvb_tuner_info
[media] dvb_frontend: document dvb_frontend_tune_settings
...
Merge patch-bomb from Andrew Morton:
- a few misc things
- Andy's "ambient capabilities"
- fs/nofity updates
- the ocfs2 queue
- kernel/watchdog.c updates and feature work.
- some of MM. Includes Andrea's userfaultfd feature.
[ Hadn't noticed that userfaultfd was 'default y' when applying the
patches, so that got fixed in this merge instead. We do _not_ mark
new features that nobody uses yet 'default y' - Linus ]
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (118 commits)
mm/hugetlb.c: make vma_has_reserves() return bool
mm/madvise.c: make madvise_behaviour_valid() return bool
mm/memory.c: make tlb_next_batch() return bool
mm/dmapool.c: change is_page_busy() return from int to bool
mm: remove struct node_active_region
mremap: simplify the "overlap" check in mremap_to()
mremap: don't do uneccesary checks if new_len == old_len
mremap: don't do mm_populate(new_addr) on failure
mm: move ->mremap() from file_operations to vm_operations_struct
mremap: don't leak new_vma if f_op->mremap() fails
mm/hugetlb.c: make vma_shareable() return bool
mm: make GUP handle pfn mapping unless FOLL_GET is requested
mm: fix status code which move_pages() returns for zero page
mm: memcontrol: bring back the VM_BUG_ON() in mem_cgroup_swapout()
genalloc: add support of multiple gen_pools per device
genalloc: add name arg to gen_pool_get() and devm_gen_pool_create()
mm/memblock: WARN_ON when nid differs from overlap region
Documentation/features/vm: add feature description and arch support status for batched TLB flush after unmap
mm: defer flush of writable TLB entries
mm: send one IPI per CPU to TLB flush all entries after unmapping pages
...
rtc can either be supplied from internal 32k clock or external crystal
generated 32k clock. Internal clock is SOC specific and the external
clock is board dependent. Adding the corresponding nodes.
Signed-off-by: Keerthy <j-keerthy@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
With the SA1100 and PXA RTC drivers be mutually exclusive and no
longer sharing hardware, PXA27x/PXA3xx platforms must use the PXA RTC
driver as the SA1100 platform device is no longer registered.
This change should be almost transparent to userspace. Former users of
pxa-rtc should be aware that 2 RTCs will be available on their kernels,
rtc0 being sa1100-rtc and rtc1 being pxa-rtc. Any userspace relying on
the fact that rtc0 was pxa-rtc should be fixed.
As a consequence:
- the first reboot after the switch will have the wrong time,
- on dual boot platform where the other OS programs some logic into the
sa1100 rtc IP, a lack of fix in userspace, ie. a kernel changing
sa1100-rtc thinking it is pxa-rtc could have dire consequence, such
as wiping the other OS data partition.
(Thanks to Robert Jarmik for help on the above commit text.)
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Cc: Daniel Mack <daniel@zonque.org>
Cc: Haojian Zhuang <haojian.zhuang@gmail.com>
Cc: Sergey Lapin <slapin@ossfans.org>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Mike Rapoport <mike@compulab.co.il>
Cc: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Now that register definitions have been moved to the driver, regs-rtc.h is
no longer used and can be removed.
Signed-off-by: Rob Herring <robh@kernel.org>
Cc: Eric Miao <eric.y.miao@gmail.com>
Cc: Haojian Zhuang <haojian.zhuang@gmail.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Now that register definitions have been moved to the driver, we can remove
them from machine specific code.
Signed-off-by: Rob Herring <robh@kernel.org>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
The drivers for the SA1100 and PXA RTCs are now mutually exclusive, so
add the memory resource for the sa1100-rtc device. Since the memory
resource is already present in the pxa_rtc_resources, that makes
sa1100_rtc_resources and pxa_rtc_resources equivalent, so use
pxa_rtc_resources for both devices and remove the duplicate
sa1100_rtc_resources.
Signed-off-by: Rob Herring <robh@kernel.org>
Cc: Daniel Mack <daniel@zonque.org>
Cc: Haojian Zhuang <haojian.zhuang@gmail.com>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Currently, the rtc-sa1100 and rtc-pxa drivers co-exist as rtc-pxa has a
superset of functionality. Having 2 drivers sharing the same memory
resource is not allowed by the driver model if resources are properly
declared. This problem was avoided by not adding memory resources to the
SA1100 RTC driver, but that prevents clean-up of the SA1100 driver.
This commit converts the PXA RTC to use the exported SA1100 RTC
functions. Now the sa1100-rtc and pxa-rtc devices are mutually
exclusive, so we must remove the sa1100-rtc from pxa27x and pxa3xx.
Signed-off-by: Rob Herring <robh@kernel.org>
Cc: Daniel Mack <daniel@zonque.org>
Cc: Haojian Zhuang <haojian.zhuang@gmail.com>
Cc: Robert Jarzmik <robert.jarzmik@free.fr>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: rtc-linux@googlegroups.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
vm86 exposes an interesting attack surface against the entry
code. Since vm86 is mostly useless anyway if mmap_min_addr != 0,
just turn it off in that case.
There are some reports that vbetool can work despite setting
mmap_min_addr to zero. This shouldn't break that use case,
as CAP_SYS_RAWIO already overrides mmap_min_addr.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Austin S Hemmelgarn <ahferroin7@gmail.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Josh Boyer <jwboyer@fedoraproject.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stas Sergeev <stsp@list.ru>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This change modifies gen_pool_get() and devm_gen_pool_create() client
interfaces adding one more argument "name" of a gen_pool object.
Due to implementation gen_pool_get() is capable to retrieve only one
gen_pool associated with a device even if multiple gen_pools are created,
fortunately right at the moment it is sufficient for the clients, hence
provide NULL as a valid argument on both producer devm_gen_pool_create()
and consumer gen_pool_get() sides.
Because only one created gen_pool per device is addressable, explicitly
add a restriction to devm_gen_pool_create() to create only one gen_pool
per device, this implies two possible error codes returned by the
function, account it on client side (only misc/sram). This completes
client side changes related to genalloc updates.
[akpm@linux-foundation.org: gen_pool_get() cleanup]
Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
An IPI is sent to flush remote TLBs when a page is unmapped that was
potentially accesssed by other CPUs. There are many circumstances where
this happens but the obvious one is kswapd reclaiming pages belonging to a
running process as kswapd and the task are likely running on separate
CPUs.
On small machines, this is not a significant problem but as machine gets
larger with more cores and more memory, the cost of these IPIs can be
high. This patch uses a simple structure that tracks CPUs that
potentially have TLB entries for pages being unmapped. When the unmapping
is complete, the full TLB is flushed on the assumption that a refill cost
is lower than flushing individual entries.
Architectures wishing to do this must give the following guarantee.
If a clean page is unmapped and not immediately flushed, the
architecture must guarantee that a write to that linear address
from a CPU with a cached TLB entry will trap a page fault.
This is essentially what the kernel already depends on but the window is
much larger with this patch applied and is worth highlighting. The
architecture should consider whether the cost of the full TLB flush is
higher than sending an IPI to flush each individual entry. An additional
architecture helper called flush_tlb_local is required. It's a trivial
wrapper with some accounting in the x86 case.
The impact of this patch depends on the workload as measuring any benefit
requires both mapped pages co-located on the LRU and memory pressure. The
case with the biggest impact is multiple processes reading mapped pages
taken from the vm-scalability test suite. The test case uses NR_CPU
readers of mapped files that consume 10*RAM.
Linear mapped reader on a 4-node machine with 64G RAM and 48 CPUs
4.2.0-rc1 4.2.0-rc1
vanilla flushfull-v7
Ops lru-file-mmap-read-elapsed 159.62 ( 0.00%) 120.68 ( 24.40%)
Ops lru-file-mmap-read-time_range 30.59 ( 0.00%) 2.80 ( 90.85%)
Ops lru-file-mmap-read-time_stddv 6.70 ( 0.00%) 0.64 ( 90.38%)
4.2.0-rc1 4.2.0-rc1
vanilla flushfull-v7
User 581.00 611.43
System 5804.93 4111.76
Elapsed 161.03 122.12
This is showing that the readers completed 24.40% faster with 29% less
system CPU time. From vmstats, it is known that the vanilla kernel was
interrupted roughly 900K times per second during the steady phase of the
test and the patched kernel was interrupts 180K times per second.
The impact is lower on a single socket machine.
4.2.0-rc1 4.2.0-rc1
vanilla flushfull-v7
Ops lru-file-mmap-read-elapsed 25.33 ( 0.00%) 20.38 ( 19.54%)
Ops lru-file-mmap-read-time_range 0.91 ( 0.00%) 1.44 (-58.24%)
Ops lru-file-mmap-read-time_stddv 0.28 ( 0.00%) 0.47 (-65.34%)
4.2.0-rc1 4.2.0-rc1
vanilla flushfull-v7
User 58.09 57.64
System 111.82 76.56
Elapsed 27.29 22.55
It's still a noticeable improvement with vmstat showing interrupts went
from roughly 500K per second to 45K per second.
The patch will have no impact on workloads with no memory pressure or have
relatively few mapped pages. It will have an unpredictable impact on the
workload running on the CPU being flushed as it'll depend on how many TLB
entries need to be refilled and how long that takes. Worst case, the TLB
will be completely cleared of active entries when the target PFNs were not
resident at all.
[sasha.levin@oracle.com: trace tlb flush after disabling preemption in try_to_unmap_flush]
Signed-off-by: Mel Gorman <mgorman@suse.de>
Reviewed-by: Rik van Riel <riel@redhat.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When unmapping pages it is necessary to flush the TLB. If that page was
accessed by another CPU then an IPI is used to flush the remote CPU. That
is a lot of IPIs if kswapd is scanning and unmapping >100K pages per
second.
There already is a window between when a page is unmapped and when it is
TLB flushed. This series increases the window so multiple pages can be
flushed using a single IPI. This should be safe or the kernel is hosed
already.
Patch 1 simply made the rest of the series easier to write as ftrace
could identify all the senders of TLB flush IPIS.
Patch 2 tracks what CPUs potentially map a PFN and then sends an IPI
to flush the entire TLB.
Patch 3 tracks when there potentially are writable TLB entries that
need to be batched differently
Patch 4 increases SWAP_CLUSTER_MAX to further batch flushes
The performance impact is documented in the changelogs but in the optimistic
case on a 4-socket machine the full series reduces interrupts from 900K
interrupts/second to 60K interrupts/second.
This patch (of 4):
It is easy to trace when an IPI is received to flush a TLB but harder to
detect what event sent it. This patch makes it easy to identify the
source of IPIs being transmitted for TLB flushes on x86.
Signed-off-by: Mel Gorman <mgorman@suse.de>
Reviewed-by: Rik van Riel <riel@redhat.com>
Reviewed-by: Dave Hansen <dave.hansen@intel.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Rename watchdog_suspend() to lockup_detector_suspend() and
watchdog_resume() to lockup_detector_resume() to avoid confusion with the
watchdog subsystem and to be consistent with the existing name
lockup_detector_init().
Also provide comment blocks to explain the watchdog_running and
watchdog_suspended variables and their relationship.
Signed-off-by: Ulrich Obergfell <uobergfe@redhat.com>
Reviewed-by: Aaron Tomlin <atomlin@redhat.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Ulrich Obergfell <uobergfe@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Stephane Eranian <eranian@google.com>
Cc: Chris Metcalf <cmetcalf@ezchip.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Ingo Molnar <mingo@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Remove watchdog_nmi_disable_all() and watchdog_nmi_enable_all() since
these functions are no longer needed. If a subsystem has a need to
deactivate the watchdog temporarily, it should utilize the
watchdog_suspend() and watchdog_resume() functions.
[akpm@linux-foundation.org: fix build with CONFIG_LOCKUP_DETECTOR=m]
Signed-off-by: Ulrich Obergfell <uobergfe@redhat.com>
Reviewed-by: Aaron Tomlin <atomlin@redhat.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Ulrich Obergfell <uobergfe@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Stephane Eranian <eranian@google.com>
Cc: Chris Metcalf <cmetcalf@ezchip.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Ingo Molnar <mingo@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The kernel's NMI watchdog has nothing to do with the watchdog subsystem.
Its header declarations should be in linux/nmi.h, not linux/watchdog.h.
The code provided two sets of dummy functions if HARDLOCKUP_DETECTOR is
not configured, one in the include file and one in kernel/watchdog.c.
Remove the dummy functions from kernel/watchdog.c and use those from the
include file.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Cc: Stephane Eranian <eranian@google.com>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Don Zickus <dzickus@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
With lockdep support implemented on CRISv32, we get the following splat.
switch_mm() can be called both from the scheduler() (with interrupts
disabled) and from flush_old_exec (via activate_mm()), with interrupts
enabled. Fix it by disabling interrupts in activate_mm(), similar to
powerpc and hexagon.
t======================================================
[ INFO: HARDIRQ-safe -> HARDIRQ-unsafe lock order detected ]
3.19.0-08802-g20bc9f1-dirty #323 Not tainted
------------------------------------------------------
init/1 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire:
(mmu_context_lock){+.+...}, at: [<c0009290>] switch_mm+0x22/0xc6
and this task is already holding:
(&rq->lock){-.-.-.}, at: [<c01a0756>] __schedule+0x5e/0x648
which would create a new lock dependency:
(&rq->lock){-.-.-.} -> (mmu_context_lock){+.+...}
but this new dependency connects a HARDIRQ-irq-safe lock:
(&rq->lock){-.-.-.}
... which became HARDIRQ-irq-safe at:
[<c002b03c>] scheduler_tick+0x28/0x5e
[<c0007c6c>] timer_interrupt+0x4e/0x6a
[<c0043ac4>] handle_irq_event_percpu+0x54/0x13c
[<c004343c>] generic_handle_irq+0x2a/0x36
to a HARDIRQ-irq-unsafe lock:
(mmu_context_lock){+.+...}
... which became HARDIRQ-irq-unsafe at:
... [<c0039e60>] __lock_acquire+0x8f8/0x1d9c
[<c0009290>] switch_mm+0x22/0xc6
[<c009c260>] flush_old_exec+0x500/0x5d4
[<c00da4c6>] load_elf_phdrs+0x7a/0x84
[<c00dbdb0>] load_elf_binary+0x21c/0x13b4
[<c009cdb6>] do_execve+0x22/0x2c
[<c001dcf2>] ____call_usermodehelper+0x0/0x154
[<c000581e>] ret_from_kernel_thread+0xe/0x14
other info that might help us debug this:
Possible interrupt unsafe locking scenario:
CPU0 CPU1
---- ----
lock(mmu_context_lock);
local_irq_disable();
lock(&rq->lock);
lock(mmu_context_lock);
<Interrupt>
lock(&rq->lock);
*** DEADLOCK ***
1 lock held by init/1:
#0: (&rq->lock){-.-.-.}, at: [<c01a0756>] __schedule+0x5e/0x648
Call Trace:
[<c019fe9e>] printk+0x0/0x4e
[<c00368f8>] print_shortest_lock_dependencies+0x0/0x15c
[<c0048628>] print_stack_trace+0x0/0x88
[<c0038912>] __lock_is_held+0x3e/0x5e
[<c003b894>] lock_acquire+0x8a/0xcc
[<c01a50c4>] _raw_spin_lock+0x44/0x7a
[<c0009290>] switch_mm+0x22/0xc6
[<c01a06f8>] __schedule+0x0/0x648
[<c01a0d76>] schedule+0x36/0x7c
[<c0037d04>] trace_hardirqs_on+0x0/0x1e
[<c0004e18>] do_work_pending+0x30/0xd4
[<c000591a>] _work_pending+0xe/0x12
Signed-off-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
Now that we have stack tracing and irq flags tracing support,
we can also enable lockdep support
Signed-off-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
Add stacktrace support, which is required for lockdep and tracing. The
stack tracing simply looks at all kernel text symbols found on the
stack, similar to the trap stack dumping code, which can also be
converted to use this.
Signed-off-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
Use a call to local_irq_enable() instead of incline asm so that the
irqsoff latency tracer knows that interrupts are enabled here.
Signed-off-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
Add support irqflags tracing, which is required for things like lockdep
and ftrace.
Signed-off-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
