It tries to "match" drivers for each interface (not "much").
Signed-off-by: Diego Herranz <diegoherranz@diegoherranz.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Otherwise generic-xhci and xhci-platform which have no data get wrongly
detected as XHCI_PLAT_TYPE_MARVELL_ARMADA by xhci_plat_type_is().
This fixes a regression in v4.5 for STiH407 family SoC's which use the
synopsis dwc3 IP, whereby the disable_clk error path gets taken due to
wrongly being detected as XHCI_PLAT_TYPE_MARVELL_ARMADA and the hcd never
gets added.
I suspect this will also fix other dwc3 DT platforms such as Exynos,
although I've only tested on STih410 SoC.
Fixes: 4efb2f6941 ("usb: host: xhci-plat: add struct xhci_plat_priv")
Cc: stable@vger.kernel.org
Cc: gregory.clement@free-electrons.com
Cc: yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
PCI hotpluggable xhci controllers such as some Alpine Ridge solutions will
remove the xhci controller from the PCI bus when the last USB device is
disconnected.
Add a flag to indicate that the host is being removed to avoid queueing
configure_endpoint commands for the dropped endpoints.
For PCI hotplugged controllers this will prevent 5 second command timeouts
For static xhci controllers the configure_endpoint command is not needed
in the removal case as everything will be returned, freed, and the
controller is reset.
For now the flag is only set for PCI connected host controllers.
Cc: <stable@vger.kernel.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes some wild pointers produced by xhci_mem_cleanup.
These wild pointers will cause system crash if xhci_mem_cleanup()
is called twice.
Reported-and-tested-by: Pengcheng Li <lpc.li@hisilicon.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes an issue that cannot work if R-Car Gen2/3 run on
above 4GB physical memory environment to use a quirk XHCI_NO_64BIT_SUPPORT.
Cc: <stable@vger.kernel.org>
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
On some xHCI controllers (e.g. R-Car SoCs), the AC64 bit (bit 0) of
HCCPARAMS1 is set to 1. However, the xHCs don't support 64-bit
address memory pointers actually. So, in this case, this driver should
call dma_set_coherent_mask(dev, DMA_BIT_MASK(32)) in xhci_gen_setup().
Otherwise, the xHCI controller will be died after a usb device is
connected if it runs on above 4GB physical memory environment.
So, this patch adds a new quirk XHCI_NO_64BIT_SUPPORT to resolve
such an issue.
Cc: <stable@vger.kernel.org>
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Give USB3 devices a better chance to enumerate at USB 3 speeds if
they are connected to a suspended host.
Solves an issue with NEC uPD720200 host hanging when partially
enumerating a USB3 device as USB2 after host controller runtime resume.
Cc: <stable@vger.kernel.org>
Tested-by: Mike Murdoch <main.haarp@gmail.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Broxton B0 also requires XHCI_PME_STUCK_QUIRK.
Adding PCI device ID for Broxton B and adding to quirk.
Cc: <stable@vger.kernel.org>
Signed-off-by: Rafal Redzimski <rafal.f.redzimski@intel.com>
Signed-off-by: Robert Dobrowolski <robert.dobrowolski@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Under some circumstances acm_tty_flush_chars() is called
with no buffer to flush. We simply need to do nothing.
Signed-off-by: Oliver Neukum <ONeukum@suse.com>
Reported-by: Torsten Hilbrich <torsten.hilbrich@secunet.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
User visible:
- Print callchains asked for events requested via 'perf trace --event' too:
(Arnaldo Carvalho de Melo)
# trace -e nanosleep --call dwarf --event sched:sched_switch/call-graph=fp/ usleep 1
0.346 (0.005 ms): usleep/24428 nanosleep(rqtp: 0x7fffa15a0540) ...
0.346 ( ): sched:sched_switch:usleep:24428 [120] S ==> swapper/3:0 [120])
__schedule+0xfe200402 ([kernel.kallsyms])
schedule+0xfe200035 ([kernel.kallsyms])
do_nanosleep+0xfe20006f ([kernel.kallsyms])
hrtimer_nanosleep+0xfe2000dc ([kernel.kallsyms])
sys_nanosleep+0xfe20007a ([kernel.kallsyms])
do_syscall_64+0xfe200062 ([kernel.kallsyms])
return_from_SYSCALL_64+0xfe200000 ([kernel.kallsyms])
__nanosleep+0xffff005b8d602010 (/usr/lib64/libc-2.22.so)
0.400 (0.059 ms): usleep/24428 ... [continued]: nanosleep()) = 0
__nanosleep+0x10 (/usr/lib64/libc-2.22.so)
usleep+0x34 (/usr/lib64/libc-2.22.so)
main+0x1eb (/usr/bin/usleep)
__libc_start_main+0xf0 (/usr/lib64/libc-2.22.so)
_start+0x29 (/usr/bin/usleep)
- Allow requesting that some CPUs or PIDs be highlighted in 'perf sched map' (Jiri Olsa)
- Compact 'perf sched map' to show just CPUs with activity, improving the output
in high core count systems (Jiri Olsa)
- Fix segfault with 'perf trace --no-syscalls -e syscall-names' by bailing out
such request, doesn't make sense to ask for no syscalls and then specify which
ones should be printed (Arnaldo Carvalho de Melo)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=VzVp
-----END PGP SIGNATURE-----
Merge tag 'perf-core-for-mingo-20160413' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
User visible changes:
- Print callchains asked for events requested via 'perf trace --event' too:
(Arnaldo Carvalho de Melo)
# trace -e nanosleep --call dwarf --event sched:sched_switch/call-graph=fp/ usleep 1
0.346 (0.005 ms): usleep/24428 nanosleep(rqtp: 0x7fffa15a0540) ...
0.346 ( ): sched:sched_switch:usleep:24428 [120] S ==> swapper/3:0 [120])
__schedule+0xfe200402 ([kernel.kallsyms])
schedule+0xfe200035 ([kernel.kallsyms])
do_nanosleep+0xfe20006f ([kernel.kallsyms])
hrtimer_nanosleep+0xfe2000dc ([kernel.kallsyms])
sys_nanosleep+0xfe20007a ([kernel.kallsyms])
do_syscall_64+0xfe200062 ([kernel.kallsyms])
return_from_SYSCALL_64+0xfe200000 ([kernel.kallsyms])
__nanosleep+0xffff005b8d602010 (/usr/lib64/libc-2.22.so)
0.400 (0.059 ms): usleep/24428 ... [continued]: nanosleep()) = 0
__nanosleep+0x10 (/usr/lib64/libc-2.22.so)
usleep+0x34 (/usr/lib64/libc-2.22.so)
main+0x1eb (/usr/bin/usleep)
__libc_start_main+0xf0 (/usr/lib64/libc-2.22.so)
_start+0x29 (/usr/bin/usleep)
- Allow requesting that some CPUs or PIDs be highlighted in 'perf sched map' (Jiri Olsa)
- Compact 'perf sched map' to show just CPUs with activity, improving the output
in high core count systems (Jiri Olsa)
- Fix segfault with 'perf trace --no-syscalls -e syscall-names' by bailing out
such request, doesn't make sense to ask for no syscalls and then specify which
ones should be printed (Arnaldo Carvalho de Melo)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
These identifiers are bogus. The interested architectures should define
HAVE_EFFICIENT_UNALIGNED_ACCESS whenever relevant to do so. If this
isn't true for some arch, it should be fixed in the arch definition.
Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on Sergey's test patch [1], this fixes zram with lz4 compression
on big endian cpus.
Note that the 64-bit preprocessor test is not a cleanup, it's part of
the fix, since those identifiers are bogus (for example, __ppc64__
isn't defined anywhere else in the kernel, which means we'd fall into
the 32-bit definitions on ppc64).
Tested on ppc64 with no regression on x86_64.
[1] http://marc.info/?l=linux-kernel&m=145994470805853&w=4
Cc: stable@vger.kernel.org
Suggested-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The commit 8950052029 ("dmaengine: dw: apply both HS interfaces and remove
slave_id usage") cleaned up the code to avoid usage of depricated slave_id
member of generic slave configuration.
Meanwhile it broke the master selection by removing important call to
dwc_set_masters() in ->device_alloc_chan_resources() which copied masters from
custom slave configuration to the internal channel structure.
Everything works until now since there is no customized connection of
DesignWare DMA IP to the bus, i.e. one bus and one or more masters are in use.
The configurations where 2 masters are connected to the different masters are
not working anymore. We are expecting one user of such configuration and need
to select masters properly. Besides that it is obviously a performance
regression since only one master is in use in multi-master configuration.
Select masters in accordance with what user asked for. Keep this patch in a form
more suitable for back porting.
We are safe to take necessary data in ->device_alloc_chan_resources() because
we don't support generic slave configuration embedded into custom one, and thus
the only way to provide such is to use the parameter to a filter function which
is called exactly before channel resource allocation.
While here, replase BUG_ON to less noisy dev_warn() and prevent channel
allocation in case of error.
Fixes: 8950052029 ("dmaengine: dw: apply both HS interfaces and remove slave_id usage")
Cc: stable@vger.kernel.org
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Pull m68knommu/coldfire fix from Greg Ungerer:
"Only a single change that removes a local arch specific gpio bus sysfs
device that now clashes with the generic gpio bus sysfs device
interface"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
m68k/gpio: remove arch specific sysfs bus device
A batch of fixes for -rc4, for various platforms. Nothing really
substantial and worth pointing out in particular; small fixes for various
bugs, see shortlog for details.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=5GPE
-----END PGP SIGNATURE-----
Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Olof Johansson:
"A batch of fixes for -rc4, for various platforms.
Nothing really substantial and worth pointing out in particular; small
fixes for various bugs, see shortlog for details"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
ARM: sa1100: remove references to the defunct handhelds.org
bus: uniphier-system-bus: fix condition of overlap check
ARM: uniphier: drop weird sizeof()
ARM: dts: am335x-baltos-ir5221: fix cpsw_emac0 link type
ARM: OMAP: Correct interrupt type for ARM TWD
ARM: DRA722: Add ID detect for Silicon Rev 2.0
ARM: dts: am43xx: fix edma memcpy channel allocation
ARM: dts: AM43x-epos: Fix clk parent for synctimer
ARM: OMAP2: Fix up interconnect barrier initialization for DRA7
documentation: Fix pinctrl documentation for Meson8 / Meson8b
ARM: dts: amlogic: Split pinctrl device for Meson8 / Meson8b
ARM: mvebu: Correct unit address for linksys
bus: mvebu-mbus: use %pa to print phys_addr_t
arm64: dts: vulcan: Update PCI ranges
ARM: u8500_defconfig: turn on the Synaptics RMI4 driver
ARM: pxa: fix the number of DMA requestor lines
ARM: OMAP2+: hwmod: Fix updating of sysconfig register
ARM: OMAP2+: Use srst_udelay for USB on dm814x
- Wrong indentation in the PMU code from the merge window
- A long-time bug occuring with running ntpd on the host, candidate for stable
- Properly handle (and warn about) the unsupported configuration of running on
systems with less than 40 bits of PA space
- More fixes to the PM and hotplug notifier stuff from the merge window
x86:
- leak of guest xcr0 (typically shows up as SIGILL)
- new maintainer (who is sending the pull request too)
- fix for merge window regression
- fix for guest CPUID
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJXCrBeAAoJEL/70l94x66DHlYIAJseQjhyXMm3J8vkZ1qoPjiM
IWUV3BoSDpMjIXZdiouDShCBwBE1zDoFCXzkGO8FGNpYTy/4WQ2DF+fQr8OFveOv
bpLJI6iYpCESh5ihhp8UDTD9oY4ZAxyPfNUx06Rirze2ijDr6rWkM16bKgdIlMpa
rzGUQWodZO0odCWVMAXSe08uistvqZ71iacpAIJQJrx3MJcq1u2+Y2daZO3df1R6
GnWxY5SK2ZvrNEwjQPXAYgCPGaJKEVUbr9BvWFoQ2O+qGA4TPv4jrOsAQ7bRh4Rr
SGOH465Qdj2EA7eJrP2/NAlD5N7H7RWkiLiyIGF4OTS6wJHU8jdnOLbYPx0VmQg=
=1OKc
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fixes from Radim Krčmář:
"ARM fixes:
- Wrong indentation in the PMU code from the merge window
- A long-time bug occuring with running ntpd on the host, candidate
for stable
- Properly handle (and warn about) the unsupported configuration of
running on systems with less than 40 bits of PA space
- More fixes to the PM and hotplug notifier stuff from the merge
window
x86:
- leak of guest xcr0 (typically shows up as SIGILL)
- new maintainer (who is sending the pull request too)
- fix for merge window regression
- fix for guest CPUID"
Paolo Bonzini points out:
"For the record, this tag is signed by me because I prepared the pull
request. Further pull requests for 4.6 will be signed and sent out by
Radim directly"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: mask CPUID(0xD,0x1).EAX against host value
kvm: x86: do not leak guest xcr0 into host interrupt handlers
KVM: MMU: fix permission_fault()
KVM: new maintainer on the block
arm64: KVM: unregister notifiers in hyp mode teardown path
arm64: KVM: Warn when PARange is less than 40 bits
KVM: arm/arm64: Handle forward time correction gracefully
arm64: KVM: Add braces to multi-line if statement in virtual PMU code
Doesn't make sense and was causing a segfault, fix it.
# trace -e clone --no-syscalls --event sched:*exec firefox
The -e option can't be used with --no-syscalls.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-ccrahezikdk2uebptzr1eyyi@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Those were converted to be evsel methods long ago, move the
source to where it belongs.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-vja8rjmkw3gd5ungaeyb5s2j@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Introducing --cpus option that will display only given cpus. Could be
used together with color-cpus option.
$ perf sched map --cpus 0,1
*A0 309999.786924 secs A0 => rcu_sched:7
*. 309999.786930 secs
*B0 . 309999.786931 secs B0 => rcuos/2:25
B0 *A0 309999.786947 secs
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1460467771-26532-9-git-send-email-jolsa@kernel.org
[ Added entry to man page ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding --color-cpus option to display selected cpus with background
color (red by default). It helps on navigating through the perf sched
map output.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1460467771-26532-8-git-send-email-jolsa@kernel.org
[ Added entry to man page ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding --color-pids option to display selected pids in color (blue by
default). It helps on navigating through the 'perf sched map' output.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1460467771-26532-7-git-send-email-jolsa@kernel.org
[ Added entry to man page ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It will be used in following patch.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1460467771-26532-6-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As preparation for next patch.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1460467771-26532-5-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding cpu_map__has() to return bool of cpu presence in cpus map.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1460467771-26532-3-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding thread_map__has() to return bool of pid presence in threads map.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1460467771-26532-2-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We already were able to ask for callchains for a specific event:
# trace -e nanosleep --call dwarf --event sched:sched_switch/call-graph=fp/ usleep 1
This would enable tracing just the "nanosleep" syscall, with callchains
at syscall exit and would ask the kernel for frame pointer callchains to
be enabled for the "sched:sched_switch" tracepoint event, its just that
we were not resolving the callchain and printing it in 'perf trace', do
it:
# trace -e nanosleep --call dwarf --event sched:sched_switch/call-graph=fp/ usleep 1
0.425 ( 0.013 ms): usleep/6718 nanosleep(rqtp: 0x7ffcc1d16e20) ...
0.425 ( ): sched:sched_switch:usleep:6718 [120] S ==> swapper/2:0 [120])
__schedule+0xfe200402 ([kernel.kallsyms])
schedule+0xfe200035 ([kernel.kallsyms])
do_nanosleep+0xfe20006f ([kernel.kallsyms])
hrtimer_nanosleep+0xfe2000dc ([kernel.kallsyms])
sys_nanosleep+0xfe20007a ([kernel.kallsyms])
do_syscall_64+0xfe200062 ([kernel.kallsyms])
return_from_SYSCALL_64+0xfe200000 ([kernel.kallsyms])
__nanosleep+0xffff008b8cbe2010 (/usr/lib64/libc-2.22.so)
0.486 ( 0.073 ms): usleep/6718 ... [continued]: nanosleep()) = 0
__nanosleep+0x10 (/usr/lib64/libc-2.22.so)
usleep+0x34 (/usr/lib64/libc-2.22.so)
main+0x1eb (/usr/bin/usleep)
__libc_start_main+0xf0 (/usr/lib64/libc-2.22.so)
_start+0x29 (/usr/bin/usleep)
#
Pretty compact, huh? DWARF callchains for raw_syscalls:sys_exit + frame
pointer callchains for a tracepoint, if your hardware supports LBR, go
wild with /call-graph=lbr/, guess the next step is to lift this from
'perf script':
-F, --fields <str> comma separated output fields prepend with 'type:'. Valid types: hw,sw,trace,raw.
Fields: comm,tid,pid,time,cpu,event,trace,ip,sym,dso,addr,symoff,period,iregs,brstack,brstacksym,flags
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-2e7yiv5hqdm8jywlmfivvx2v@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When we loop over all queued machine check error records to pass them
to the registered notifiers we use llist_for_each_entry(). But the loop
calls gen_pool_free() for the entry in the body of the loop - and then
the iterator looks at node->next after the free.
Use llist_for_each_entry_safe() instead.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: <stable@vger.kernel.org>
Cc: Gong Chen <gong.chen@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/0205920@agluck-desk.sc.intel.com
Link: http://lkml.kernel.org/r/1459929916-12852-4-git-send-email-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
At the moment, initialization path is using test_cpu_cap(&boot_cpu_data),
to detect PT, which is just open coding boot_cpu_has(). Use the latter
instead.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Acked-by: Borislav Petkov <bp@suse.de>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: eranian@google.com
Cc: vince@deater.net
Link: http://lkml.kernel.org/r/1459953307-14372-1-git-send-email-alexander.shishkin@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The uprobe_xol_ops structures are never modified, so declare them as const.
Done with the help of Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: kernel-janitors@vger.kernel.org
Link: http://lkml.kernel.org/r/1460200649-32526-1-git-send-email-Julia.Lawall@lip6.fr
Signed-off-by: Ingo Molnar <mingo@kernel.org>
While the previous commit fixed the missing monitor_present flag
update, it may be still in an inconsistent state while the driver
repolls: the flag itself is updated, but the eld_valid flag and the
contents don't follow until the repoll finishes (and may be repeated
for a few times).
The basic problem is that pin_eld->monitor_present is updated in the
caller side. This should have been updated only in update_eld(). So,
the proper fix is to avoid accessing pin_eld but only spec->temp_eld.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The commit [bd48128539: ALSA: hda - Fix forgotten HDMI
monitor_present update] covered the missing update of monitor_present
flag, but this caused a regression for devices without the i915 eld
notifier. Since the old code supposed that pin_eld->monitor_present
was updated by the caller side, the hdmi_present_sense_via_verbs()
doesn't update the temporary eld->monitor_present but only
pin_eld->monitor_present, which is now overridden in update_eld().
The fix is to update pin_eld->monitor_present as well before calling
update_eld().
Note that this may still leave monitor_present flag in an inconsistent
state when the driver repolls, but this is at least the old behavior.
More proper fix will follow in the later patch.
Fixes: bd48128539 ('ALSA: hda - Fix forgotten HDMI monitor_present update')
Signed-off-by: Hyungwon Hwang <hyungwon.hwang7@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
- Automagically create a 'bpf-output' event, easing the setup of BPF
C "scripts" that produce output via the perf ring buffer. Now it is
just a matter of calling any perf tool, such as 'trace', with a C
source file that references the __bpf_stdout__ output channel and
that channel will be created and connected to the script:
# trace -e nanosleep --event test_bpf_stdout.c usleep 1
0.013 ( 0.013 ms): usleep/2818 nanosleep(rqtp: 0x7ffcead45f40 ) ...
0.013 ( ): __bpf_stdout__:Raise a BPF event!..)
0.015 ( ): perf_bpf_probe:func_begin:(ffffffff81112460))
0.261 ( ): __bpf_stdout__:Raise a BPF event!..)
0.262 ( ): perf_bpf_probe:func_end:(ffffffff81112460 <- ffffffff81003d92))
0.264 ( 0.264 ms): usleep/2818 ... [continued]: nanosleep()) = 0
#
Further work is needed to reduce the number of lines in a perf bpf C source
file, this being the part where we greatly reduce the command line setup (Wang Nan)
- 'perf trace' now supports callchains, with 'trace --call-graph dwarf' using
libunwind, just like 'perf top', to ask the kernel for stack dumps for CFI
processing. This reduces the overhead by asking just for userspace callchains
and also only for the syscall exit tracepoint (raw_syscalls:sys_exit)
(Milian Wolff, Arnaldo Carvalho de Melo)
Try it with, for instance:
# perf trace --call dwarf ping 127.0.0.1
An excerpt of a system wide 'perf trace --call dwarf" session is at:
https://fedorapeople.org/~acme/perf/perf-trace--call-graph-dwarf--all-cpus.txt
You may need to bump the number of mmap pages, using -m/--mmap-pages,
but on a Broadwell machine the defaults allowed system wide tracing to
work without losing that many records, experiment with just some
syscalls, like:
# perf trace --call dwarf -e nanosleep,futex
All the targets available for 'perf record', 'perf top' (--pid, --tid, --cpu,
etc) should work. Also --duration may be interesting to try.
To get filenames from in various syscalls pointer args (open, ettc), add this
to the mix:
# perf probe 'vfs_getname=getname_flags:72 pathname=filename:string'
Making this work is next in line:
# trace --call dwarf --ev sched:sched_switch/call-graph=fp/ usleep 1
I.e. honouring per-tracepoint callchains in 'perf trace' in addition to
in raw_syscalls:sys_exit.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=jBSC
-----END PGP SIGNATURE-----
Merge tag 'perf-core-for-mingo-20160411' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core
Pull perf/core improvements from Arnaldo Carvalho de Melo:
User visible changes:
- Automagically create a 'bpf-output' event, easing the setup of BPF
C "scripts" that produce output via the perf ring buffer. Now it is
just a matter of calling any perf tool, such as 'trace', with a C
source file that references the __bpf_stdout__ output channel and
that channel will be created and connected to the script:
# trace -e nanosleep --event test_bpf_stdout.c usleep 1
0.013 ( 0.013 ms): usleep/2818 nanosleep(rqtp: 0x7ffcead45f40 ) ...
0.013 ( ): __bpf_stdout__:Raise a BPF event!..)
0.015 ( ): perf_bpf_probe:func_begin:(ffffffff81112460))
0.261 ( ): __bpf_stdout__:Raise a BPF event!..)
0.262 ( ): perf_bpf_probe:func_end:(ffffffff81112460 <- ffffffff81003d92))
0.264 ( 0.264 ms): usleep/2818 ... [continued]: nanosleep()) = 0
#
Further work is needed to reduce the number of lines in a perf bpf C source
file, this being the part where we greatly reduce the command line setup (Wang Nan)
- 'perf trace' now supports callchains, with 'trace --call-graph dwarf' using
libunwind, just like 'perf top', to ask the kernel for stack dumps for CFI
processing. This reduces the overhead by asking just for userspace callchains
and also only for the syscall exit tracepoint (raw_syscalls:sys_exit)
(Milian Wolff, Arnaldo Carvalho de Melo)
Try it with, for instance:
# perf trace --call dwarf ping 127.0.0.1
An excerpt of a system wide 'perf trace --call dwarf" session is at:
https://fedorapeople.org/~acme/perf/perf-trace--call-graph-dwarf--all-cpus.txt
You may need to bump the number of mmap pages, using -m/--mmap-pages,
but on a Broadwell machine the defaults allowed system wide tracing to
work without losing that many records, experiment with just some
syscalls, like:
# perf trace --call dwarf -e nanosleep,futex
All the targets available for 'perf record', 'perf top' (--pid, --tid, --cpu,
etc) should work. Also --duration may be interesting to try.
To get filenames from in various syscalls pointer args (open, ettc), add this
to the mix:
# perf probe 'vfs_getname=getname_flags:72 pathname=filename:string'
Making this work is next in line:
# trace --call dwarf --ev sched:sched_switch/call-graph=fp/ usleep 1
I.e. honouring per-tracepoint callchains in 'perf trace' in addition to
in raw_syscalls:sys_exit.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
User visible:
- Beautify more syscall arguments in 'perf trace', using the type column in
tracepoint /format fields to attach, for instance, a pid_t resolver to the
thread COMM, also attach a mode_t beautifier in the same fashion
(Arnaldo Carvalho de Melo)
- Build the syscall table id <-> name resolver using the same .tbl file
used in the kernel to generate headers, to avoid the delay in getting
new syscalls supported in the audit-libs external dependency, done so
far only for x86_64 (Arnaldo Carvalho de Melo)
- Improve the documentation of event specifications (Andi Kleen)
- Process update events in 'perf script', fixing up this use case:
# perf stat -a -I 1000 -e cycles record | perf script -s script.py
- Shared object symbol adjustment fixes, fixing symbol resolution in
Android (Wang Nan)
Infrastructure:
- Add dedicated unwind addr_space member into thread struct, to allow
tools to use thread->priv, noticed while working on having callchains
in 'perf trace' (Jiri Olsa)
Build fixes:
- Fix the build in Ubuntu 12.04 (Arnaldo Carvalho de Melo, Vinson Lee)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=AF/P
-----END PGP SIGNATURE-----
Merge tag 'perf-core-for-mingo-20160408' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
User visible changes:
- Beautify more syscall arguments in 'perf trace', using the type column in
tracepoint /format fields to attach, for instance, a pid_t resolver to the
thread COMM, also attach a mode_t beautifier in the same fashion
(Arnaldo Carvalho de Melo)
- Build the syscall table id <-> name resolver using the same .tbl file
used in the kernel to generate headers, to avoid the delay in getting
new syscalls supported in the audit-libs external dependency, done so
far only for x86_64 (Arnaldo Carvalho de Melo)
- Improve the documentation of event specifications (Andi Kleen)
- Process update events in 'perf script', fixing up this use case:
# perf stat -a -I 1000 -e cycles record | perf script -s script.py
- Shared object symbol adjustment fixes, fixing symbol resolution in
Android (Wang Nan)
Infrastructure changes:
- Add dedicated unwind addr_space member into thread struct, to allow
tools to use thread->priv, noticed while working on having callchains
in 'perf trace' (Jiri Olsa)
Build fixes:
- Fix the build in Ubuntu 12.04 (Arnaldo Carvalho de Melo, Vinson Lee)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
As Al pointed, d_revalidate should return RCU lookup before using d_inode.
This was originally introduced by:
commit 34286d6662 ("fs: rcu-walk aware d_revalidate method").
Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: stable <stable@vger.kernel.org>
Starting with 4.1 the tracing subsystem has its own filesystem
which is automounted in the tracing subdirectory of debugfs.
Prior to this debugfs could be bind mounted in a cloned mount
namespace, but if tracefs has been mounted under debugfs this
now fails because there is a locked child mount. This creates
a regression for container software which bind mounts debugfs
to satisfy the assumption of some userspace software.
In other pseudo filesystems such as proc and sysfs we're already
creating mountpoints like this in such a way that no dirents can
be created in the directories, allowing them to be exceptions to
some MNT_LOCKED tests. In fact we're already do this for the
tracefs mountpoint in sysfs.
Do the same in debugfs_create_automount(), since the intention
here is clearly to create a mountpoint. This fixes the regression,
as locked child mounts on permanently empty directories do not
cause a bind mount to fail.
Cc: stable@vger.kernel.org # v4.1+
Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
- fix USB adress register for Linksys Armada 388 based boards
- fix build warning in mvebu-mbus
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iEYEABECAAYFAlcGmgAACgkQCwYYjhRyO9WmLACgkLHkRxw3Xmp5/g3tSgBzh06A
Qb4An2adegesOnsQzbVwWeaCaJxdEbk/
=sMxU
-----END PGP SIGNATURE-----
Merge tag 'mvebu-fixes-4.6-1' of git://git.infradead.org/linux-mvebu into fixes
mvebu fixes for 4.6 (part 1)
- fix USB adress register for Linksys Armada 388 based boards
- fix build warning in mvebu-mbus
* tag 'mvebu-fixes-4.6-1' of git://git.infradead.org/linux-mvebu:
ARM: mvebu: Correct unit address for linksys
bus: mvebu-mbus: use %pa to print phys_addr_t
Signed-off-by: Olof Johansson <olof@lixom.net>
The website handhelds.org has been down for a long time and is
likely never coming back online.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
There is only a single fix for dma requestor lines initial
setup, triggered by dmaengine previous fix.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=NaUe
-----END PGP SIGNATURE-----
Merge tag 'pxa-fixes-v4.6' of https://github.com/rjarzmik/linux into fixes
ARM: pxa: fixes for v4.6
There is only a single fix for dma requestor lines initial
setup, triggered by dmaengine previous fix.
* tag 'pxa-fixes-v4.6' of https://github.com/rjarzmik/linux:
ARM: pxa: fix the number of DMA requestor lines
Signed-off-by: Olof Johansson <olof@lixom.net>
SoCs with few board fixes and a fix for a long time hwmod bug:
- Fix cpsw_emac0 link type for baltos-ir5221
- Fix interrupt type for TWD
- Fix edma memcpy channel allocation for am43x
- Fix am43x-epos sycntimer32k by using the correct assigned clock
- Fix interconnect barrier for dra7
- Fix a long time hwmod bug for updating sysconfig register properly
- Fix flakey booting on dm814x where USB reset needs a delay
And there is one minor change that is not strictly a fix, but is
good to have for proper hardware detection:
- Detect dra7 silicon revision 2.0 properly
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=5fhs
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v4.6/fixes-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes
Fixes for omaps against v4.6-rc1. Mostly minor fixes for the newer
SoCs with few board fixes and a fix for a long time hwmod bug:
- Fix cpsw_emac0 link type for baltos-ir5221
- Fix interrupt type for TWD
- Fix edma memcpy channel allocation for am43x
- Fix am43x-epos sycntimer32k by using the correct assigned clock
- Fix interconnect barrier for dra7
- Fix a long time hwmod bug for updating sysconfig register properly
- Fix flakey booting on dm814x where USB reset needs a delay
And there is one minor change that is not strictly a fix, but is
good to have for proper hardware detection:
- Detect dra7 silicon revision 2.0 properly
* tag 'omap-for-v4.6/fixes-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: am335x-baltos-ir5221: fix cpsw_emac0 link type
ARM: OMAP: Correct interrupt type for ARM TWD
ARM: DRA722: Add ID detect for Silicon Rev 2.0
ARM: dts: am43xx: fix edma memcpy channel allocation
ARM: dts: AM43x-epos: Fix clk parent for synctimer
ARM: OMAP2: Fix up interconnect barrier initialization for DRA7
ARM: OMAP2+: hwmod: Fix updating of sysconfig register
ARM: OMAP2+: Use srst_udelay for USB on dm814x
Signed-off-by: Olof Johansson <olof@lixom.net>
My intention was to ioremap a 4-byte register. Coincidentally enough,
sizeof(SZ_4) equals to SZ_4, but this code is weird anyway.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
This patch fixes the issue introduced by the ext4 crypto fix in a same manner.
For F2FS, however, we flush the pending IOs and wait for a while to acquire free
memory.
Fixes: c9af28fdd4 ("ext4 crypto: don't let data integrity writebacks fail with ENOMEM")
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch synced with the below two ext4 crypto fixes together.
In 4.6-rc1, f2fs newly introduced accessing f_path.dentry which crashes
overlayfs. To fix, now we need to use file_dentry() to access that field.
Fixes: c0a37d4878 ("ext4: use file_dentry()")
Fixes: 9dd78d8c9a ("ext4: use dget_parent() in ext4_file_open()")
Cc: Miklos Szeredi <mszeredi@redhat.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch updates fscrypto along with the below ext4 crypto change.
Fixes: 3d43bcfef5 ("ext4 crypto: use dget_parent() in ext4_d_revalidate()")
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Commit 254d4d111e ("drm/exynos: Add dependency for G2D in Kconfig") made
the DRM_EXYNOS_G2D symbol to only be selectable if the s5p-g2d V4L2 driver
is not enabled, since both use the same HW IP block.
But added the dependency as depends on !VIDEO_SAMSUNG_S5P_G2D which isn't
correct since Kconfig expressions are not boolean but tristate. So it will
only evaluate to 'n' if VIDEO_SAMSUNG_S5P_G2D=y but it will evaluate to m
if VIDEO_SAMSUNG_S5P_G2D=m.
This means that both the V4L2 and DRM drivers can be enabled if the former
is enabled as a module, which is not what we want.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The "ret = regmap_write()" assignment was missing so this error message
is never printed.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
