It is necessary to clear MC13892_SWITCHERS0_SWxHI bit when set voltage to the
voltage range from 1100000 to 1375000. Leaving MC13892_SWITCHERS0_SWxHI bit
untouched may result in wrong voltage setting.
For example, currently switch voltage from 1400000 to 1300000 will set the
voltage to 1800000 because the HI bit is still set.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@sirena.org.uk>
It's safe to call regulator_unregister() with NULL, thus remove the NULL test
before regulator_unregister() calls.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@sirena.org.uk>
Patch adds device tree probe support for mc13783-regulator driver.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Mark Brown <broonie@sirena.org.uk>
This patch adds a warning about incorrect regulators instead of
printing the names of non-information message about the wrong amount.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Mark Brown <broonie@sirena.org.uk>
* pm-cpufreq: (57 commits)
cpufreq: MAINTAINERS: Add co-maintainer
cpufreq: pxa2xx: initialize variables
ARM: S5pv210: compiling issue, ARM_S5PV210_CPUFREQ needs CONFIG_CPU_FREQ_TABLE=y
cpufreq: cpu0: Put cpu parent node after using it
cpufreq: ARM big LITTLE: Adapt to latest cpufreq updates
cpufreq: ARM big LITTLE: put DT nodes after using them
cpufreq: Don't call __cpufreq_governor() for drivers without target()
cpufreq: exynos5440: Protect OPP search calls with RCU lock
cpufreq: dbx500: Round to closest available freq
cpufreq: Call __cpufreq_governor() with correct policy->cpus mask
cpufreq / intel_pstate: Optimize intel_pstate_set_policy
cpufreq: OMAP: instantiate omap-cpufreq as a platform_driver
arm: exynos: Enable OPP library support for exynos5440
cpufreq: exynos: Remove error return even if no soc is found
cpufreq: exynos: Add cpufreq driver for exynos5440
cpufreq: AMD "frequency sensitivity feedback" powersave bias for ondemand governor
cpufreq: ondemand: allow custom powersave_bias_target handler to be registered
cpufreq: convert cpufreq_driver to using RCU
cpufreq: powerpc/platforms/cell: move cpufreq driver to drivers/cpufreq
cpufreq: sparc: move cpufreq driver to drivers/cpufreq
...
Conflicts:
MAINTAINERS (with commit a8e39c3 from pm-cpuidle)
drivers/cpufreq/cpufreq_governor.h (with commit beb0ff3)
* pm-cpuidle: (51 commits)
cpuidle: add maintainer entry
ARM: s3c64xx: cpuidle: use init/exit common routine
SH: cpuidle: use init/exit common routine
cpuidle: fix comment format
ARM: imx: cpuidle: use init/exit common routine
ARM: davinci: cpuidle: use init/exit common routine
ARM: kirkwood: cpuidle: use init/exit common routine
ARM: calxeda: cpuidle: use init/exit common routine
ARM: tegra: cpuidle: use init/exit common routine for tegra3
ARM: tegra: cpuidle: use init/exit common routine for tegra2
ARM: OMAP4: cpuidle: use init/exit common routine
ARM: shmobile: cpuidle: use init/exit common routine
ARM: tegra: cpuidle: use init/exit common routine
ARM: OMAP3: cpuidle: use init/exit common routine
ARM: at91: cpuidle: use init/exit common routine
ARM: ux500: cpuidle: use init/exit common routine
cpuidle: make a single register function for all
ARM: ux500: cpuidle: replace for_each_online_cpu by for_each_possible_cpu
cpuidle: remove en_core_tk_irqen flag
ARM: OMAP3: remove cpuidle_wrap_enter
...
* pm-assorted:
PM / OPP: add documentation to RCU head in struct opp
PM / sleep: invalidate TEST_CPUS and TEST_CORE support for freeze state
PM / sleep: add TEST_PLATFORM support for freeze state
* acpica: (33 commits)
ACPICA: Update version to 20130328
ACPICA: Add a lock to the internal object reference count mechanism
ACPICA: Fix a format string for 64-bit generation
ACPICA: Remove FORCE_DELETE option for global reference count mechanism
ACPICA: Improve error message for Index() operator
ACPICA: FADT: Remove extraneous warning for very large GPE registers
ACPICA: Fix a typo in a function header, no functional change
ACPICA: Fix a typo in an error message
ACPICA: Fix for some comments/headers
ACPICA: _OSI Support: handle any errors from acpi_os_acquire_mutex()
ACPICA: Predefine names: Add allowed argument types to master info table
ACPI: Set length even for TYPE_END_TAG acpi resource
ACPICA: Update version to 20130214
ACPICA: Object repair: Allow 0-length packages for variable-length packages
ACPICA: Disassembler: Add warnings for unresolved control methods
ACPICA: Return object repair: Add resource template repairs
ACPICA: Return object repair: Add string-to-unicode conversion
ACPICA: Split object conversion functions to a new file
ACPICA: Add mechanism for early object repairs on a per-name basis
ACPICA: Remove trailing comma in enum declarations
...
* acpi-lpss:
ACPI / LPSS: make code less confusing for reader
ACPI / LPSS: Add support for exposing LTR registers to user space
ACPI / scan: Add special handler for Intel Lynxpoint LPSS devices
* acpi-hotplug:
ACPI / memhotplug: Remove info->failed bit
ACPI / memhotplug: set info->enabled for memory present at boot time
ACPI: Verify device status after eject
acpi: remove reference to ACPI_HOTPLUG_IO
ACPI: Update _OST handling for notify
ACPI: Update PNPID match handling for notify
ACPI: Update PNPID set/free interfaces
ACPI: Remove acpi_device dependency in acpi_device_set_id()
ACPI / hotplug: Make acpi_hotplug_profile_ktype static
ACPI / scan: Make memory hotplug driver use struct acpi_scan_handler
ACPI / container: Use hotplug profile user space interface
ACPI / hotplug: Introduce user space interface for hotplug profiles
ACPI / scan: Introduce acpi_scan_handler_matching()
ACPI / container: Use common hotplug code
ACPI / scan: Introduce common code for ACPI-based device hotplug
ACPI / scan: Introduce acpi_scan_match_handler()
A late-arriving fix for musb on OMAP4, resolving an issue where the musb
IP won't be clocked and thus not functional. Small in scope, most of the
lines changed is a longish comment.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=pHY5
-----END PGP SIGNATURE-----
Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fix from Olof Johansson:
"A late-arriving fix for musb on OMAP4, resolving an issue where the
musb IP won't be clocked and thus not functional. Small in scope,
most of the lines changed is a longish comment."
* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
ARM: OMAP4: hwmod data: make 'ocp2scp_usb_phy_phy_48m" as the main clock
I think we could just move the full vm_iomap_memory() function into
util.h or similar, but I didn't get any reply from anybody actually
using nommu even to this trivial patch, so I'm not going to touch it any
more than required.
Here's the fairly minimal stub to make the nommu case at least
potentially work. It doesn't seem like anybody cares, though.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It has been reported that there is a new version (different USB rev)
of the Logitech DFGT in the 'wild'.
This patch allows the kernel to recognise this wheel and send it the
command to enter native mode.
Reported-by: "Denis Jovic" <djovic78@gmail.com>
Signed-off-by: Simon Wood <simon@mungewell.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
In cpuset_hotplug_workfn(), partition_sched_domains() is called without
hotplug lock held, which is actually needed (stated in the function
header of partition_sched_domains()).
This patch tries to use rebuild_sched_domains() to solve the above
issue, and makes the code looks a little simpler.
Signed-off-by: Li Zhong <zhong@linux.vnet.ibm.com>
Signed-off-by: Li Zefan <lizefan@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
this MUSB no longer works on omap4 based devices.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=MBEd
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v3.9-rc6/fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes
From Tony Lindgren:
One MUSB regression fix that I forgot to send earlier. Without
this MUSB no longer works on omap4 based devices.
* tag 'omap-for-v3.9-rc6/fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: OMAP4: hwmod data: make 'ocp2scp_usb_phy_phy_48m" as the main clock
Signed-off-by: Olof Johansson <olof@lixom.net>
Add Viresh as a co-maintainer of cpufreq framework.
This would mostly be for cpufreq core and ARM drivers but not
restricted to them.
Also add a pointer to the git tree cpufreq patches are pulled into.
[rjw: Changelog]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Tentatively-acked-by: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Currently cpuidle drivers are spread across different archs.
As a result, there are several different paths for cpuidle patch
submissions: cpuidle core changes go through linux-pm, ARM driver
changes go to the arm-soc or SoC-specific trees, sh changes go
through the sh arch tree, pseries changes go through the PowerPC tree
and finally intel changes go through the Len's tree while ACPI idle
changes go through linux-pm.
That makes it difficult to consolidate code and to propagate
modifications from the cpuidle core to the different drivers.
Hopefully, a movement has started to put the majority of cpuidle
drivers under drivers/cpuidle like cpuidle-calxeda.c and
cpuidle-kirkwood.c.
Add a maintainer entry for cpuidle to MAINTAINERS to clarify the
situation and to indicate to new cpuidle driver authors that those
drivers should not go into arch-specific directories.
The upstreaming process is unchanged: Rafael takes patches for
merging into his tree, but with an Acked-by: tag from the driver's
maintainer, so indicate in the drivers' headers who maintains them.
The arrangement will be the same as for cpufreq.
[rjw: Changelog]
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Andrew Lunn <andrew@lunn.ch> #for kirkwood
Acked-by: Jason Cooper <jason@lakedaemon.net> #for kirkwood
Acked-by: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
I mistakenly removed the call to eventfd->poll() while I was actually
intending to remove the return value...
Calling evenfd->poll() will hook cgroup_event_wake() to the poll
waitqueue, which will be called to unregister eventfd when rmdir a
cgroup or close eventfd.
Signed-off-by: Li Zefan <lizefan@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Try:
# mount -t cgroup xxx /cgroup
# mkdir /cgroup/sub && rmdir /cgroup/sub && umount /cgroup
And you might see this:
ida_remove called for id=1 which is not allocated.
It's because cgroup_kill_sb() is called to destroy root->cgroup_ida
and free cgrp->root before ida_simple_removed() is called. What's
worse is we're accessing cgrp->root while it has been freed.
Signed-off-by: Li Zefan <lizefan@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Ensure to unregister all regulators before return error in probe().
The regulator register order depends on the regulator ID pass to
ab3100_regulator_register() function. Thus we need to scan ab3100_regulator_desc
and find the index of successfully registered regulators, or alternatively just
call ab3100_regulators_remove() to unregister all registered regulators.
Since current code uses a static ab3100_regulators table, explicitly set
reg->rdev = NULL after regulator_unregister() call to ensure calling
ab3100_regulators_remove() in the unwind path always work.
Also move ab3100_regulators_remove() to avoid forward declaration.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
All regulators have ascendant voltage list in this driver.
Use regulator_map_voltage_ascend for them.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Pull media fixes from Mauro Carvalho Chehab:
"Two driver fixes.
One avoids reading any file at a system with a cx25821 board
(fortunately, this is not a common device). The other one prevents
reading after a buffer with ISDB-T devices based on mb86a20s."
* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
[media] cx25821: do not expose broken video output streams
[media] mb86a20s: Fix estimate_rate setting
