DRA722 is part of DRA72x family which are single core cortex A15 devices
with most infrastructure IPs otherwise same as whats on the DRA74x family.
So move the cpu nodes into dra74x.dtsi and dra72x.dtsi respectively.
Also add a minimal dra72-evm dts file.
Signed-off-by: Rajendra Nayak <rnayak@ti.com>
Cc: linux-doc@vger.kernel.org
Cc: devicetree@vger.kernel.org
Acked-by: Arnd Bergmann <arnd@arndb.de>
[tony@atomide.com: updated for Makefile sorting]
Signed-off-by: Tony Lindgren <tony@atomide.com>
"ti,dra752" is neither documented nor correct, since the device is actually a
dra742 device as rightly documented in dt bindings.
Signed-off-by: Rajendra Nayak <rnayak@ti.com>
Cc: devicetree@vger.kernel.org
Signed-off-by: Tony Lindgren <tony@atomide.com>
Add support of AW-NH387 (mwifiex) WiFi/BT chip connected to MMC3.
Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Add support for CM-T54 CoM and SBC-T54 board:
http://compulab.co.il/products/computer-on-modules/cm-t54/http://compulab.co.il/products/sbcs/sbc-t54/
SBC-T54 is a single board computer based on OMAP5432 CPU.
It is implemented with a CM-T54 CoM providing most of the functions,
and SB-T54 carrier board providing connectors and several additional
functions.
Added basic support for:
* PMIC
* LED
* MMC/SD
* eMMC
* USB
* I2C1/4
* SB-T54 and CM-T54 EEPROMs
* RTC
Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il>
[tony@atomide.com: updated for Makefile sorting]
Signed-off-by: Tony Lindgren <tony@atomide.com>
Expose the PMU on OMAP5.
Tested with perf on OMAP5 uEVM.
Signed-off-by: Nathan Lynch <nathan_lynch@mentor.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The N950/N9 uses two additional regulators from the twl 4030 for CSI-2
receiver (vaux2) and cameras (vaux3).
Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
Signed-off-by: Tony Lindgren <tony@atomide.com>
This patch adds support for the Nokia N900's sound
system.
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Reviewed-by: Mark Brown <broonie@linaro.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Add madc node to twl4030, so that board DTS
files can simply reference the A/D converter.
Signed-off-by: Sebastian Reichel <sre@debian.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Add device tree support for the wireless chip
built into the Nokia N900.
Signed-off-by: Sebastian Reichel <sre@debian.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Enable
- USB PHY
- USB
for am43x-epos-evm
Signed-off-by: George Cherian <george.cherian@ti.com>
Acked-by: Roger Quadros <rogerq@ti.com>
Acked-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Enable
- USB PHY
- USB
for am437x-gp-evm
Signed-off-by: George Cherian <george.cherian@ti.com>
Acked-by: Roger Quadros <rogerq@ti.com>
Acked-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Add nodes for 2 instances each of
- ocp2scp
- USB PHY control module
- USB PHY
- dwc3_omap
- USB
for AM43xx.
Signed-off-by: George Cherian <george.cherian@ti.com>
Acked-by: Roger Quadros <rogerq@ti.com>
Acked-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Add USB and USB PHY reference clock data
Signed-off-by: George Cherian <george.cherian@ti.com>
Acked-by: Roger Quadros <rogerq@ti.com>
Acked-by: Felipe Balbi <balbi@ti.com>
[tony@atomide.com: tabified]
Signed-off-by: Tony Lindgren <tony@atomide.com>
Venice2 can detect write-protect on the SD card. Add the required
DT entries to allow this.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
[swarren: fixed GPIO polarity per Thierry's testing]
Tested-by: Thierry Reding <treding@nvidia.com>
With ARCH_OMAP2PLUS being separated out into OMAP2/3/4/5 etc all the TI device
tree blobs are built no matter the combination of SoCs that are enabled. This
often causes a bunch of irrelevant .dts to be built on a multi platform kernel,
this enables the building of just the ones relevant to the SoCs that are
actually enabled. It also orders the dts file alphabetically.
This also helps to avoid trivial merge conflicts when adding support
for new boards.
[tony@atomide.com: updated the order for am335x and am43x, moved am3517 to omap3]
Signed-off-by: Tony Lindgren <tony@atomide.com>
MTD NAND partition for file-system should start at offset=0xA00000
Signed-off-by: Pekon Gupta <pekon@ti.com>
[tony@atomide.com: changed to lower case hex like we tend to use]
Signed-off-by: Tony Lindgren <tony@atomide.com>
- Use generic node names
- Fix up some weird formatting and white spaces
- Update copyright info
Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
The mpu_clk, main_clk, and dbg_base_clk outputs from the main PLL go through a
pre-divider. Update socfpga.dtsi to represent those dividers for these
clocks.
Re-use the "div-reg" property that was used for the socfpga-gate-clock as this
is the same thing. Also update the documentation.
Signed-off-by: Dinh Nguyen <dinguyen@altera.com>
Add the necessary #reset-cells property to the rst-mgr node and
provide a header-file with all possible resets specified.
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Dinh Nguyen <dinguyen@altera.com>
The timers and uart can get their clock frequencies using the common clock
driver.
Reviewed-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Dinh Nguyen <dinguyen@altera.com>
The Altera Cyclone5 and Arria5 devkit has an EEPROM and a RTC on the
board. This patch adds support for them.
Signed-off-by: Dinh Nguyen <dinguyen@altera.com>
---
v2: Remove LCD as the driver has not been upstreamed.
Convert all socfpga DT files to the dtc preprocessor include syntax.
This allows to include header files in the devicetrees like other
SoC-types already do.
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Dinh Nguyen <dinguyen@altera.com>
The SOCrates has an M41T82M RTC on i2c0. Add it.
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Dinh Nguyen <dinguyen@altera.com>
The SOCrates is a SOCFpga-Cyclone5 based board from EBV.
Add support for it.
Reviewed-by: Pavel Machek <pavel@denx.de>
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Dinh Nguyen <dinguyen@altera.com>
Add both can controllers to the dtsi.
Reviewed-by: Pavel Machek <pavel@denx.de>
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Dinh Nguyen <dinguyen@altera.com>
The first interrupt is not at 180 but 104. Fix it.
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Dinh Nguyen <dinguyen@altera.com>
Remove use of property ti,vcc-aux-disable-is-sleep, which does not
exist.
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The CubieTruck has an AMPAK AP6210 WiFi+Bluetooth module. The WiFi
part is a BCM43362 IC connected to MMC3 in the A20 SoC via SDIO.
The IC also takes a power enable signal via GPIO.
The WiFi module supports out-of-band interrupt signaling via GPIO,
but this is not supported in this patch.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
- more support for at91sam9rl and its associated EK board
- some improvements to at91sam9g45 (ADC, TS, PWM leds)
- addition of some missing pieces for describing audio
of SAMA5D3-EK in DT
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
iQEcBAABAgAGBQJTUaATAAoJEAf03oE53VmQ48oH/3T2Uj8MY6J3gtFkBgys1IrQ
ZfOMEscf4wDoyoYKTyifu1iRr0KLCxdaS1BUtimzgOkDPZj3aHoK97uoIn+NWUZt
hJTSGPDh3neMAMT8W5/dqIXY5Fwt9qWjJygWCtzh+TLGDZPdnkdLMblRCX8w6Y/T
dZDEtbfcpGD+N4BqOrbEO49wKHdUAtetvF3FTxu5+2GcbO/n1Hn3K28F4m+7mmBe
9NFw1Su5xHXEIjCaKJUO4BZDS7QQXjR2afbYSr/JAZ/x1ij8Rz3OZ+RWrE7JqvPf
+VidFo6oLnOgp9FbkDxAbPbC6mWiFz1PGDsrFjR8GlvJpEzgBpme4WcN4o6bXko=
=3kLo
-----END PGP SIGNATURE-----
Merge tag 'at91-dt' of git://github.com/at91linux/linux-at91 into next/dt
Merge "at91: DT for 3.16 #1" from Nicolas Ferre:
3.16: first DT series:
- more support for at91sam9rl and its associated EK board
- some improvements to at91sam9g45 (ADC, TS, PWM leds)
- addition of some missing pieces for describing audio
of SAMA5D3-EK in DT
* tag 'at91-dt' of git://github.com/at91linux/linux-at91:
ARM: at91: sama5d3: clock for ssc from rk pin
ARM: at91: sama5d3: add the missing property
ARM: at91: sama5d3: correct the sound compatible string
ARM: at91: sama5d3: disable sound by default
ARM: at91: sama5d3: add DMA property for SSC devices
ARM: at91/dt: at91sam9m10g45ek PWM leds polarity is inversed
ARM: at91/dt: at91sam9m10g45ek: add ADC and touchscreen support
ARM: at91/dt: sam9g45: improve ADC/touchscreen support
ARM: at91/dt: add peripherals to the at91sam9rlek board
ARM: at91/dt: sam9rl: add lcd, adc, usb gadget and pwm support
Signed-off-by: Olof Johansson <olof@lixom.net>
AM4372 has two clk domains 100f and 200s. Provide register mapping,
interrupt information and compatibility flags associated with it.
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Signed-off-by: Afzal Mohammed <afzal@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
We have currently marked the DRA7 L3 as being compatible with
omap4-l3-noc This is not true considering the differences in data
involved.
Now that we have proper support for ti,dra7-l3-noc, add the clock
modules clk1 and clk3 (clk2 submodule will be handled by the driver)
and switch compatibility flag to use the proper data.
Signed-off-by: Rajendra Nayak <ranayak@ti.com>
[nm@ti.com: map up full address range]
Signed-off-by: Nishanth Menon <nm@ti.com>
Add CPSW fck and CPTS clock and clock names for AM4372
Signed-off-by: George Cherian <george.cherian@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
- mvebu
- fix NOR bus width on Armada XP boards
- use qsgmii on Armada XP GP board
- add i2c bus freq for Armada 370 DB board
- add SATA interface for Armada 375 DB
- kirkwood
- fix double probe of audio codec for T5325
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQIcBAABAgAGBQJTX5qGAAoJEP45WPkGe8Zn7iMP/1PxcEqs0Eb+vfOg7O5W/j72
DTNswSUN/L/mG6rDIAy2vrpx8qlkVknu0UpL/wb6pWXrSg7db6nTtfmHU77d4lTD
XhatamU4hquBkAIcXP7r/spIgL5FfCwlRMFfK+NmpAmYDq/KTofErBgR8llTYfRK
HUrsH9RKdTe/Omh6Wv5ogwoqMe2S6dx5R4U0yR2tP4mcgYrDu59hzDi+Ca8EXD9r
D+BqLJWg1JQOwY1PBZuzdSTNXbascleg004xW2nyV6MFWegqzgrgYhxPseiJIzwI
D7nQDlMuo4fOAC4mbyAcjaDYJAaTU1EGazhV7XQXoAKDgrCtN8hPJ7sBv/MfrVjH
KZhtJNEwaDh7YRCctF2eqWveEiFe7hcjViOBda/8EGXqHtPe4jL+IjVyruYPMUmh
nKaJooxOVNFzo2QimobRxMtOhQfr57UVjHngh+9u0fvnr81uFhMig2+ddNWIn7HP
ZELGcyyJr5kXYt8e9j13lnGUdHKUtdSD2ILng2ETTC8pnWRP0TPkfjtXbyZ1BqWN
fLR3jd5nAepRILynS4Ct55FVy2FjsNtCYYekeJrTmIgNps8NaOjyI7Jx+MsGSOpm
QOWz4iejohwFDc6vVMwEzh5i4JW4qBSBFPksX9Q5BWevi14uVXWujGnGEzZs34h+
Z/Pxh9rydne+wyYakHcr
=6yRE
-----END PGP SIGNATURE-----
Merge tag 'mvebu-dt-fixes-3.15' of git://git.infradead.org/linux-mvebu into fixes
From Jason Cooper:
mvebu DT fixes for v3.15
- mvebu
- fix NOR bus width on Armada XP boards
- use qsgmii on Armada XP GP board
- add i2c bus freq for Armada 370 DB board
- add SATA interface for Armada 375 DB
- kirkwood
- fix double probe of audio codec for T5325
* tag 'mvebu-dt-fixes-3.15' of git://git.infradead.org/linux-mvebu:
ARM: Kirkwood: T5325: Fix double probe of Codec
ARM: mvebu: enable the SATA interface on Armada 375 DB
ARM: mvebu: specify I2C bus frequency on Armada 370 DB
ARM: mvebu: use qsgmii phy-mode for Armada XP GP interfaces
ARM: mvebu: fix NOR bus-width in Armada XP OpenBlocks AX3 Device Tree
ARM: mvebu: fix NOR bus-width in Armada XP DB Device Tree
ARM: mvebu: fix NOR bus-width in Armada XP GP Device Tree
Signed-off-by: Olof Johansson <olof@lixom.net>
timings for smc911x LAN9220 (and potentially LAN9221) devices
that were noted on a cm-t3730 system. Also fix THUMB mode
for SMP, and mailbox related warnings when booted with device
tree.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=8NVy
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v3.15/fixes-gpmc' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes
Merge fixes from Tony Lindgren:
Mostly fixes for occasional memory corruption caused by bad
timings for smc911x LAN9220 (and potentially LAN9221) devices
that were noted on a cm-t3730 system. Also fix THUMB mode
for SMP, and mailbox related warnings when booted with device
tree.
* tag 'omap-for-v3.15/fixes-gpmc' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: AM3517: Disable absent IPs inherited from OMAP3
ARM: dts: OMAP2: Fix interrupts for OMAP2420 mailbox
ARM: dts: OMAP5: Add mailbox dt node to fix boot warning
ARM: OMAP5: Switch to THUMB mode if needed on secondary CPU
ARM: dts: am437x-gp-evm: Do not reset gpio5
ARM: dts: omap3-igep0020: use SMSC9221 timings
ARM: dts: Fix GPMC timings for LAN9220
ARM: dts: Fix GPMC Ethernet timings for omap cm-t sbc-t boards for device tree
ARM: dts: Fix bad OTG muxing for cm-t boards
Signed-off-by: Olof Johansson <olof@lixom.net>
The cd pin settings have been taken from the original firmware fex files,
and have been confirmed to work on the actual boards.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
This adds pin-muxing info for the mmc controller / port combinations which
are known to be used on actual boards.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Add nodes for the 4 mmc controllers found on A20 SoCs to
arch/arm/boot/dts/sun7i-a20.dtsi.
Signed-off-by: David Lanzendörfer <david.lanzendoerfer@o2s.ch>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Add a new sun6i-a31-m9 dts file for the Mele M9 / Mele A1000G Quad. These
HTPCs use the same board in a different case, for more details see:
http://linux-sunxi.org/Mele_M9
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Add nodes for the 4 mmc controllers found on A31 SoCs to
arch/arm/boot/dts/sun6i-a31.dtsi.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
