Pull drm fixes from Dave Airlie:
"Not a huge amount happening, some MAINTAINERS updates, radeon, vmwgfx
and tegra fixes"
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
drm/vmwgfx: avoid null pointer dereference at failure paths
drm/vmwgfx: Make sure backing mobs are cleared when allocated. Update driver date.
drm/vmwgfx: Remove some unused surface formats
drm/radeon: enable speaker allocation setup on dce3.2
drm/radeon: change audio enable logic
drm/radeon: fix audio disable on dce6+
drm/radeon: free uvd ring on unload
drm/radeon: disable pll sharing for DP on DCE4.1
drm/radeon: fix missing bo reservation
drm/radeon: print the supported atpx function mask
MAINTAINERS: update drm git tree entry
MAINTAINERS: add entry for drm radeon driver
drm/tegra: Add guard to avoid double disable/enable of RGB outputs
gpu: host1x: do not check previously handled gathers
drm/tegra: fix typo 'CONFIG_TEGRA_DRM_FBDEV'
more radeon fixes
* 'drm-fixes-3.14' of git://people.freedesktop.org/~agd5f/linux:
drm/radeon: enable speaker allocation setup on dce3.2
drm/radeon: change audio enable logic
drm/radeon: fix audio disable on dce6+
drm/radeon: free uvd ring on unload
drm/radeon: disable pll sharing for DP on DCE4.1
drm/radeon: fix missing bo reservation
drm/radeon: print the supported atpx function mask
Apparently we've missed a few more than what Fengguang's 0-day tester
recently reported in i915_irq.c ... Makes sparse happy again (ignore
some spurious stuff about ksyms of exported functions).
Cc: kbuild test robot <fengguang.wu@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
vmw_takedown_otable_base() and vmw_mob_unbind() check for
potential vmw_fifo_reserve() failure and print error message,
but then immediately dereference NULL pointer.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Backing mob contents is propagated to user-space, so make sure backing
mobs are cleared when allocated. This also accidently fix rendering errors
with celestia when emulating legacy mode.
Also update driver date.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
The 'order' parameter for IOMMU-aware dma-mapping implementation was
introduced mainly as a hack to reduce size of the bitmap used for
tracking IO virtual address space. Since now it is possible to dynamically
resize the bitmap, this hack is not needed and can be removed without any
impact on the client devices. This way the parameters for
arm_iommu_create_mapping() becomes much easier to understand. 'size'
parameter now means the maximum supported IO address space size.
The code will allocate (resize) bitmap in chunks, ensuring that a single
chunk is not larger than a single memory page to avoid unreliable
allocations of size larger than PAGE_SIZE in atomic context.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Now that Christian fixed the performance problems with
the feedback buffer in mesa, we can enable variable UVD
clocks. There are multiple UVD power states associated
with different types and numbers of streams. This uses
the appropriate state based on that information rather
than always using the fastest UVD clocks which saves some
power. One possible downside is that this may adversely
affect decode benchmarks since these power states target
specific playback requirements rather than maximum
performance. If that becomes an issue, we can add a
sysfs attribute to force the max UVD state.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
We no longer need to take the ring lock while checking for
a gpu lockup, so just cleanup the code.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Use atomics and jiffies_64, so that we don't need to have the
ring mutex locked any more and avoid wrap arounds.
v2: fix some checkpatch warnings
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Now that we disable audio while setting up the audio
hw, we should be able to set this up without hangs.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Disable audio around audio hw setup. This may avoid
hangs on certain asics.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Properly clear the enable bit when audio disable is requested.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Cc: stable@vger.kernel.org
Need to free the uvd ring. Also reshuffle gart tear down to
happen after uvd tear down.
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Cc: stable@vger.kernel.org
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Causes display problems. We had already disabled
sharing for non-DP displays.
Based on a patch from:
Niels Ole Salscheider <niels_ole@salscheider-online.de>
bug:
https://bugzilla.kernel.org/show_bug.cgi?id=58121
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Otherwise we might get a crash here.
Signed-off-by: Christian König <christian.koenig@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Print the supported functions mask in addition to
the version. This is useful in debugging PX
problems since we can see what functions are available.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
We call this "clflush" in /proc/cpuinfo, and have
cpu_has_clflush()... let's be consistent and just call it that.
Cc: Gleb Natapov <gleb@kernel.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Alan Cox <alan@linux.intel.com>
Link: http://lkml.kernel.org/n/tip-mlytfzjkvuf739okyn40p8a5@git.kernel.org
So this is the initial pull request for radeon drm-next 3.15. Highlights:
- VCE bringup including DPM support
- Few cleanups for the ring handling code
* 'drm-next-3.15' of git://people.freedesktop.org/~deathsimple/linux:
drm/radeon: cleanup false positive lockup handling
drm/radeon: drop radeon_ring_force_activity
drm/radeon: drop drivers copy of the rptr
drm/radeon/cik: enable/disable vce cg when encoding v2
drm/radeon: add support for vce 2.0 clock gating
drm/radeon/dpm: properly enable/disable vce when vce pg is enabled
drm/radeon/dpm: enable dynamic vce state switching v2
drm/radeon: add vce dpm support for KV/KB
drm/radeon: enable vce dpm on CI
drm/radeon: add vce dpm support for CI
drm/radeon: fill in set_vce_clocks for CIK asics
drm/radeon/dpm: fetch vce states from the vbios
drm/radeon/dpm: fill in some initial vce infrastructure
drm/radeon/dpm: move platform caps fetching to a separate function
drm/radeon: add callback for setting vce clocks
drm/radeon: add VCE version parsing and checking
drm/radeon: add VCE ring query
drm/radeon: initial VCE support v4
drm/radeon: fix CP semaphores on CIK
Updates from Jean-Fracois for the TDA998x driver, which are on top of
the fixes you have previously pulled, except these changes aren't
intended for -rc, but the next merge window.
Several of these are issues of correctness - passing more correct HDMI
info packets, not reading registers in older chips documented as write
only (despite appearing to be read/write in later chips). Others are
code cleanups (using definitions rather than constants where we have
them already in the kernel).
Additional functionality is also added by way of optional support for
the IRQ from the TDA998x, which allows us to avoid busy-waiting for
the EDID reads.
* 'tda998x-devel' of git://ftp.arm.linux.org.uk/~rmk/linux-cubox:
drm/i2c: tda998x: always use the same device for all kernel messages
drm/i2c: tda998x: adjust the audio clock divider for S/PDIF
drm/i2c: tda998x: code optimization
drm/i2c: tda998x: remove the unused variable ca_i2s
drm/i2c: tda998x: make the audio code more readable
drm/i2c: tda998x: use irq for connection status and EDID read
drm/i2c: tda998x: always enable EDID read IRQ
drm/i2c: tda998x: add DT documentation
drm/i2c: tda998x: add DT support
drm/i2c: tda998x: don't read write-only registers
drm/i2c: tda998x: don't freeze the system at audio startup time
drm/i2c: tda998x: change probe message origin
drm/i2c: tda998x: code cleanup
drm/i2c: tda998x: clean up error chip version checking
drm/i2c: tda998x: check more I/O errors
drm/i2c: tda998x: simplify the i2c read/write functions
drm/i2c: tda998x: use ALSA IEC958 definitions and update audio frequency
drm/i2c: tda998x: add the active aspect in HDMI AVI frame
drm/i2c: tda998x: use HDMI constants
- Yet more steps towards atomic modeset from Ville.
- DP panel power sequencing improvements from Paulo.
- irq code cleanups from Ville.
- 5.4 GHz dp lane clock support for bdw/hsw from Todd.
- Clock readout support for hsw/bdw (aka fastboot) from Jesse.
- Make pipe underruns report at ERROR level (Ville). This is to check our
improved watermarks code.
- Full ppgtt support from Ben for gen7.
- More fbc fixes and improvements from Ville all over the place, unfortunately
not yet enabled by default on more platforms.
- w/a cleanups from Ville.
- HiZ stall optimization settings (Chia-I Wu).
- Display register mmio offset refactor patch from Antti.
- RPS improvements for corner-cases from Jeff McGee.
* tag 'drm-intel-next-2014-02-07' of ssh://git.freedesktop.org/git/drm-intel: (166 commits)
drm/i915: Update rps interrupt limits
drm/i915: Restore rps/rc6 on reset
drm/i915: Prevent recursion by retiring requests when the ring is full
drm/i915: Generate a hang error code
drm/i915: unify FLIP_DONE macro names
drm/i915: vlv: s/spin_lock_irqsave/spin_lock/ in irq handler
drm/i915: factor out valleyview_pipestat_irq_handler
drm/i915: vlv: don't unmask IIR[DISPLAY_PIPE_A/B_VBLANK] interrupt
drm/i915: Reorganize display pipe register accesses
drm/i915: Treat using a purged buffer as a source of EFAULT
drm/i915: Convert EFAULT into a silent SIGBUS
drm/i915: release mutex in i915_gem_init()'s error path
drm/i915: check for oom when allocating private_default_ctx
drm/i915/vlv: WA to fix Voltage not getting dropped to Vmin when Gfx is power gated.
drm/i915: Get rid of acthd based guilty batch search
drm/i915: Use hangcheck score to find guilty context
drm/i915: Drop WaDisablePSDDualDispatchEnable:ivb for IVB GT2
drm/i915: Fix IVB GT2 WaDisableDopClockGating and WaDisablePSDDualDispatchEnable
drm/i915: Don't access snooped pages through the GTT (even for error capture)
drm/i915: Only print information for filing bug reports once
...
Conflicts:
drivers/gpu/drm/i915/intel_dp.c
This series of patches implements a small framework that abstracts away
some of the functionality that the DisplayPort AUX channel provides. It
comes with a set of generic helpers that use the driver implementations
to reduce code duplication.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=SovB
-----END PGP SIGNATURE-----
Merge tag 'drm/dp-aux-for-3.15-rc1' of git://anongit.freedesktop.org/tegra/linux into drm-next
drm: DisplayPort AUX framework for v3.15-rc1
This series of patches implements a small framework that abstracts away
some of the functionality that the DisplayPort AUX channel provides. It
comes with a set of generic helpers that use the driver implementations
to reduce code duplication.
* tag 'drm/dp-aux-for-3.15-rc1' of git://anongit.freedesktop.org/tegra/linux:
drm/dp: Allow registering AUX channels as I2C busses
drm/dp: Add DisplayPort link helpers
drm/dp: Add drm_dp_dpcd_read_link_status()
drm/dp: Add AUX channel infrastructure
Implements an I2C-over-AUX I2C adapter on top of the generic drm_dp_aux
infrastructure. It extracts the retry logic from existing drivers, which
should help in porting those drivers to this new helper.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
---
Changes in v5:
- move comments partially to to header file
- keep MOT set between I2C messages
- return -EPROTO on short reads
Changes in v4:
- fix typo "bitrate" -> "bit rate"
Changes in v3:
- add back DRM_DEBUG_KMS and DRM_ERROR messages
- embed i2c_adapter within struct drm_dp_aux
- fix typo in comment
Add a helper to probe a DP link (read out the supported DPCD revision,
maximum rate, link count and capabilities) as well as power up the DP
link and configure it accordingly.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
---
Changes in v5:
- export helpers
Changes in v4:
- fix a couple of typos in comments as pointed out by Alex Deucher
Changes in v3:
- split into drm_dp_link_power_up() and drm_dp_link_configure()
- do not change sink state for DPCD versions earlier than 1.1
- sleep for 1-2 ms after setting local sink to D0 state
- read and write consecutive registers where possible
- read DPCD revision when link is probed
- remove duplicate kerneldoc
The function reads the link status (6 bytes starting at offset 0x202)
from the DPCD so that it can be conveniently passed to other DPCD
helpers.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
This is a superset of the current i2c_dp_aux bus functionality and can
be used to transfer native AUX in addition to I2C-over-AUX messages.
Helpers are provided to read and write the DPCD, either blockwise or
byte-wise. Many of the existing helpers for DisplayPort take a copy of a
portion of the DPCD and operate on that, without a way to write data
back to the DPCD (e.g. for configuration of the link).
Subsequent patches will build upon this infrastructure to provide common
functionality in a generic way.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
---
Changes in v5:
- move comments partially to struct drm_dp_aux_msg in header file
- return -EPROTO on short reads in DPCD helpers
Changes in v4:
- fix a typo in a comment
Changes in v3:
- reorder drm_dp_dpcd_writeb() arguments to be more intuitive
- return number of bytes transferred in drm_dp_dpcd_write()
- factor out drm_dp_dpcd_access()
- describe error codes
Merge "qcom driver changes for v3.15" from Kumar Gala:
We've split Qualcomm MSM support into legacy and multiplatform. These
drivers are only relevant on the multiplatform supported SoCs so switch the
Kconfig depends to ARCH_QCOM.
* tag 'qcom-drivers-for-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/galak/linux-qcom:
gpio: msm: switch Kconfig to ARCH_QCOM depends
hwrng: msm: switch Kconfig to ARCH_QCOM depends
power: reset: msm - switch Kconfig to ARCH_QCOM depends
drm/msm: drop ARCH_MSM Kconfig depend
tty: serial: msm: Enable building msm_serial for ARCH_QCOM
- Fix for a recent probing regression in the nouveau driver introduced
by an ACPI change related to the handling of _DSM from Jiang Liu.
- Fix for a dock station sysfs attribute that stopped working correctly
after recent changes in the ACPI core.
- cpufreq fix taking care of broken code related to CPU removal and
overlooked by a previous recent fix in that area. From Viresh Kumar.
- Two intel_pstate fixes related to Baytrail support added during
the 3.13 cycle (candidates for -stable) from Dirk Brandewie.
- ACPI video fix removing duplicate brightness values from the _BCL
table which makes its user space interface behave sanely. From
Hans de Goede.
- Fix for the powernow-k8 cpufreq driver making it initialize its
per-CPU data structures correctly from Srivatsa S. Bhat.
- Fix for an obscure memory leak in the ACPI PCI interrupt allocation
code (related to ISA) from Tomasz Nowicki.
- ACPI video blacklist changes moving several systems that should
use the native backlight interface instead of the ACPI one from
the general ACPI _OSI blacklist the the ACPI video driver's
blacklist where they belong. This consists of an ACPI video
driver update from Aaron Lu and a revert of a previous commit
adding systems to the ACPI _OSI blacklist requested by Takashi Iwai.
- Several fixes for build issues in ACPI drivers occuring when
CONFIG_PM_SLEEP is unset from Shuah Khan.
- Fix for an sscanf() format string in the ACPI Smart Battery
Subsystem (SBS) driver from Luis G.F.
/
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=5gW2
-----END PGP SIGNATURE-----
Merge tag 'pm+acpi-3.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI and power management fixes from Rafael Wysocki:
"These include two fixes for recent regressions related to ACPI, a
cpufreq fix for breakage overlooked by a previous fix commit, two
intel_pstate fixes for stuff added during the 3.13 cycle that need to
go into -stable, three fixes for older bugs that also are -stable
candidates, ACPI video blacklist changes related to BIOSes that behave
in a special way on Windows 8, several build fixes for CONFIG_PM_SLEEP
unset in ACPI drivers and an ACPI driver cleanup.
Specifics:
- Fix for a recent probing regression in the nouveau driver
introduced by an ACPI change related to the handling of _DSM from
Jiang Liu.
- Fix for a dock station sysfs attribute that stopped working
correctly after recent changes in the ACPI core.
- cpufreq fix taking care of broken code related to CPU removal and
overlooked by a previous recent fix in that area. From Viresh
Kumar.
- Two intel_pstate fixes related to Baytrail support added during the
3.13 cycle (candidates for -stable) from Dirk Brandewie.
- ACPI video fix removing duplicate brightness values from the _BCL
table which makes its user space interface behave sanely. From
Hans de Goede.
- Fix for the powernow-k8 cpufreq driver making it initialize its
per-CPU data structures correctly from Srivatsa S Bhat.
- Fix for an obscure memory leak in the ACPI PCI interrupt allocation
code (related to ISA) from Tomasz Nowicki.
- ACPI video blacklist changes moving several systems that should use
the native backlight interface instead of the ACPI one from the
general ACPI _OSI blacklist the the ACPI video driver's blacklist
where they belong. This consists of an ACPI video driver update
from Aaron Lu and a revert of a previous commit adding systems to
the ACPI _OSI blacklist requested by Takashi Iwai.
- Several fixes for build issues in ACPI drivers occuring when
CONFIG_PM_SLEEP is unset from Shuah Khan.
- Fix for an sscanf() format string in the ACPI Smart Battery
Subsystem (SBS) driver from Luis G.F"
* tag 'pm+acpi-3.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
intel_pstate: Add support for Baytrail turbo P states
intel_pstate: Use LFM bus ratio as min ratio/P state
ACPI / nouveau: fix probing regression related to _DSM
Revert "ACPI: Blacklist Win8 OSI for some HP laptop 2013 models"
ACPI / video: Add systems that should favour native backlight interface
ACPI / video: Filter the _BCL table for duplicate brightness values
cpufreq: powernow-k8: Initialize per-cpu data-structures properly
cpufreq: remove sysfs link when a cpu != policy->cpu, is removed
ACPI / PCI: Fix memory leak in acpi_pci_irq_enable()
ACPI / dock: Make 'docked' sysfs attribute work as documented
ACPI / SBS: Fix incorrect sscanf() string
ACPI / thermal: fix thermal driver compile error when CONFIG_PM_SLEEP is undefined
ACPI / SBS: fix SBS driver compile error when CONFIG_PM_SLEEP is undefined
ACPI / fan: fix fan driver compile error when CONFIG_PM_SLEEP is undefined
ACPI / button: fix button driver compile error when CONFIG_PM_SLEEP is undefined
ACPI / battery: fix battery driver compile error when CONFIG_PM_SLEEP is undefined
ACPI / AC: fix AC driver compile error when CONFIG_PM_SLEEP is undefined
Fix regression caused by commit b072e53, which breaks loading nouveau
driver on optimus laptops.
On some platforms, ACPI _DSM method (nouveau_op_dsm_muid, function 0)
has special requirements on the fourth parameter, which is different
from ACPI specifications. So revert to the private implementation
to check availability of _DSM functions instead of using common
acpi_check_dsm() interface.
Fixes: b072e53b0a (ACPI / nouveau: replace open-coded _DSM code with helper functions)
Reported-and-tested-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
[rjw: Subject]
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
These patches contain a fix for a potential hang when the RGB output is
disabled twice, a typofix that prevents the framebuffer console from
being restored on ->lastclose() and an optimization to do as little work
as possible during host1x job submission.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=pQjy
-----END PGP SIGNATURE-----
Merge tag 'drm/for-3.14-rc3' of git://anongit.freedesktop.org/tegra/linux into drm-fixes
drm/tegra: Fixes for v3.14-rc3
These patches contain a fix for a potential hang when the RGB output is
disabled twice, a typofix that prevents the framebuffer console from
being restored on ->lastclose() and an optimization to do as little work
as possible during host1x job submission.
* tag 'drm/for-3.14-rc3' of git://anongit.freedesktop.org/tegra/linux:
drm/tegra: Add guard to avoid double disable/enable of RGB outputs
gpu: host1x: do not check previously handled gathers
drm/tegra: fix typo 'CONFIG_TEGRA_DRM_FBDEV'
This patch fix spelling typo in Documentation/DocBook.
It is because .html and .xml files are generated by make htmldocs,
I have to fix a typo within the source files.
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Pull request of 2014-02-18
One compile fix and one memory leak.
* tag 'ttm-fixes-3.14-2014-02-18' of git://people.freedesktop.org/~thomash/linux:
drm/ttm: Fix memory leak in ttm_agp_backend.c
drm/ttm: declare 'struct device' in ttm_page_alloc.h
Pull request of 2014-02-18.
Nothing special. The biggest change is adding a couple of command defines and
packing the command data correctly.
* tag 'vmwgfx-fixes-3.14-2014-02-18' of git://people.freedesktop.org/~thomash/linux:
drm/vmwgfx: Fix command defines and checks
drm/vmwgfx: Fix possible integer overflow
drm/vmwgfx: Remove stray const
drm/vmwgfx: unlock on error path in vmw_execbuf_process()
drm/vmwgfx: Get maximum mob size from register SVGA_REG_MOB_MAX_SIZE
drm/vmwgfx: Fix a couple of sparse warnings and errors
The CP semaphore queue on CIK has a bug that triggers if uncompleted
waits use the same address while a signal is still pending. Work around
this by using different addresses for each sync.
Signed-off-by: Christian König <christian.koenig@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Static checkers complain that probably curly braces were intended here,
but actually it makes more sense to remove the extra tab.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Most laptops seems to have a vblank period of less than
300 and mclk switching works fine. Drop the quirk and
set the default threshold to 200.
bug:
https://bugzilla.kernel.org/show_bug.cgi?id=70701
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Some hardware may not support standard 64x64 cursors. Add
a drm cap to query the cursor size from the kernel. Some examples
include radeon CIK parts (128x128 cursors) and armada (32x64 or 64x32).
This allows things like device specific ddxes to remove asics specific
logic and also allows xf86-video-modesetting to work properly with hw
cursors on this hardware. Default to 64 if the driver doesn't specify
a size.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
We were already storing the bpc (bits per color) information
in radeon_crtc, so just use that everywhere rather than
calculating it everywhere we use it. This also allows us
to change it in one place if we ever want to override it.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Check always when we calculate the free dw, not just the first time.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
The reason for the false positives was fixed quite some time ago and since
most engines can still execute NOPs while being locked up it leads to false
negatives.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
In all cases where it really matters we are using the read functions anyway.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
