Or Gerlitz says:
====================
Here's a batch of fixes to the mlx4 core and ethernet drivers for 3.9
The commit that disabled RFS when running in SRIOV mode fixes a regression which was
introduced in 3.9-rc1 but actually present also in the 3.8 -stable series. It turns out
that a slightly different fix is needed there and we will generate and submit it there.
Patches done against net commit 66d29cbc59 "benet: Wait f/w POST until timeout"
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 37706996 "mlx4_en: fix allocation of CPU affinity reverse-map" fixed
a bug when mlx4_dev->caps.comp_pool is larger from the device rx rings, but
introduced a regression.
When the mlx4_core is activating its "legacy mode" (e.g when running in SRIOV
mode) w.r.t to EQs/IRQs usage, comp_pool becomes zero and we're crashing on
divide by zero alloc_cpu_rmap.
Fix that by enabling RFS only when running in non-legacy mode.
Reported-by: Yan Burman <yanb@mellanox.com>
Cc: Kleber Sacilotto de Souza <klebers@linux.vnet.ibm.com>
Signed-off-by: Amir Vadai <amirv@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Make sure we cleanup all MAC related resources (entries in the port MAC
table and steering rules) when stopping a port or when the driver is unloaded.
The leak was introduced by commit 07cb4b0a "net/mlx4_en: Manage hash of MAC
addresses per port".
Signed-off-by: Yan Burman <yanb@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Remove unnecessary use of workqueue for the device MAC address setting
flow, and fix a race when setting MAC address which was introduced by
commit c07cb4b0a "net/mlx4_en: Manage hash of MAC addresses per port"
The race happened when mlx4_en_replace_mac was being executed in parallel
with a successive call to ndo_set_mac_address, e.g witn an A/B/A MAC
setting configuration test, the third set fails.
With this change we also properly report an error if set MAC fails.
Signed-off-by: Yan Burman <yanb@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The set_param_l function assumes casting a u64 pointer to a u32 pointer
allows to access the lower 32bits, but it results in writing the upper
32 bits on big endian systems.
The fixed function reads the upper 32 bits of the 64 argument, and or's
them with the 32 bits of the 32-bit value passed to the function.
Since this is now a "read-modify-write" operation, we got many
"unintialized variable" warnings which needed to be fixed as well.
Reported-by: Alexander Schmidt <alexschm@de.ibm.com>.
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Older kernels detect DMFS (device-managed flow steering) from the HCA
device capability directly, regardless of whether the capability was
enabled in INIT_HCA, this is fixed by commit 7b8157bed "mlx4_core: Adjustments
to Flow Steering activation logic for SR-IOV"
To protect against guests running kernels without this fix, the host driver
should turn off the DMFS capability bit in mlx4_QUERY_DEV_CAP_wrapper.
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Guests kernels may not correctly detect if DMFS (device-enabled flow steering) is
activated by the host. If DMFS is activated, the master should return error to guests
which try to use the B0-steering flow calls (mlx4_QP_ATTACH).
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The code cleanups fix up W=1 compiler warnings and some unnecessary checks. The
new Kconfig option, defaulting to N, allows the rarely used eCryptfs kernel to
userspace communication channel to be compiled out. This may be the first step
in it being eventually removed.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=XwgS
-----END PGP SIGNATURE-----
Merge tag 'ecryptfs-3.9-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs
Pull ecryptfs fixes from Tyler Hicks:
"Minor code cleanups and new Kconfig option to disable /dev/ecryptfs
The code cleanups fix up W=1 compiler warnings and some unnecessary
checks. The new Kconfig option, defaulting to N, allows the rarely
used eCryptfs kernel to userspace communication channel to be compiled
out. This may be the first step in it being eventually removed."
Hmm. I'm not sure whether these should be called "fixes", and it
probably should have gone in the merge window. But I'll let it slide.
* tag 'ecryptfs-3.9-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs:
eCryptfs: allow userspace messaging to be disabled
eCryptfs: Fix redundant error check on ecryptfs_find_daemon_by_euid()
ecryptfs: ecryptfs_msg_ctx_alloc_to_free(): remove kfree() redundant null check
eCryptfs: decrypt_pki_encrypted_session_key(): remove kfree() redundant null check
eCryptfs: remove unneeded checks in virt_to_scatterlist()
eCryptfs: Fix -Wmissing-prototypes warnings
eCryptfs: Fix -Wunused-but-set-variable warnings
eCryptfs: initialize payload_len in keystore.c
Make the code for zapping the oldest mmu page, placed at the tail of the
active list, a separate function.
Reviewed-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Takuya Yoshikawa <yoshikawa_takuya_b1@lab.ntt.co.jp>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
We are traversing the linked list, invalid_list, deleting each entry by
kvm_mmu_free_page(). _safe version is there for such a case.
Reviewed-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Takuya Yoshikawa <yoshikawa_takuya_b1@lab.ntt.co.jp>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
The expression (sp)->gfn should not be expanded using @gfn.
Although no user of these macros passes a string other than gfn now,
this should be fixed before anyone sees strange errors.
Note: ignored the following checkpatch errors:
ERROR: Macros with complex values should be enclosed in parenthesis
ERROR: trailing statements should be on next line
Reviewed-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Takuya Yoshikawa <yoshikawa_takuya_b1@lab.ntt.co.jp>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Pablo Neira Ayuso says:
====================
The following patchset contains Netfilter fixes for your net tree,
they are:
* Don't generate audit log message if audit is not enabled, from Gao Feng.
* Fix logging formatting for packets dropped by helpers, by Joe Perches.
* Fix a compilation warning in nfnetlink if CONFIG_PROVE_RCU is not set,
from Paul Bolle.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Jeff Kirsher says:
====================
This series contains updates to e1000e only.
All three patches come from Konstantin Khlebnikov to resolve power
management issues. The first patch removes redundant and unbalanced
pci_disable_device() from the shutdown function. The second patch
removes redundant actions from the driver and fixes the interaction
with actions in pci-bus runtime power management code. The third
and last patch fixes some messages like 'Error reading PHY register'
and 'Hardware Erorr' and saves several seconds on reboot.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add missing address space annotations to all put_guest()/get_guest() callers.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
The code can be significantly shortened. There is no functional change,
except that for large (> PAGE_SIZE) copies the guest translation would
be done more frequently.
However, there is not a single user which does this currently. If one
gets added later on this functionality can be added easily again.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
The put_guest_u*/get_guest_u* are nothing but wrappers for the regular
put_user/get_user uaccess functions. The only difference is that before
accessing user space the guest address must be translated to a user space
address.
Change the order of arguments for the guest access functions so they
match their uaccess parts. Also remove the u* suffix, so we simply
have put_guest/get_guest which will automatically use the right size
dependent on pointer type of the destination/source that now must be
correct.
In result the same behaviour as put_user/get_user except that accesses
must be aligned.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Let's change to the paradigm that every return code from guest memory
access functions that is not zero translates to -EFAULT and do not
explictly compare.
Explictly comparing the return value with -EFAULT has already shown to
be a bit fragile. In addition this is closer to the handling of
copy_to/from_user functions, which imho is in general a good idea.
Also shorten the return code handling in interrupt.c a bit.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
When out-of-memory the tprot code incorrectly injected a program check
for the guest which reported an addressing exception even if the guest
address was valid.
Let's use the new gmap_translate() which translates a guest address to
a user space address whithout the chance of running into an out-of-memory
situation.
Also make it more explicit that for -EFAULT we won't find a vma.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Implement gmap_translate() function which translates a guest absolute address
to a user space process address without establishing the guest page table
entries.
This is useful for kvm guest address translations where no memory access
is expected to happen soon (e.g. tprot exception handler).
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Guest access functions like copy_to/from_guest() call __guestaddr_to_user()
which in turn call gmap_fault() in order to translate a guest address to a
user space address.
In error case __guest_addr_to_user() returns either -EFAULT or -ENOMEM.
The copy_to/from_guest functions just pass these return values down to the
callers.
The -ENOMEM case however is problematic since there are several places
which access guest memory like:
rc = copy_to_guest(...);
if (rc == -EFAULT)
error_handling();
So in case of -ENOMEM the code assumes that the guest memory access
succeeded even though it failed.
This can cause guest data or state corruption.
If __guestaddr_to_user() returns -ENOMEM the meaning is that a valid user
space mapping exists, but there was not enough memory available when trying
to build the guest mapping. In other words an out-of-memory situation
occured.
For normal user space accesses an out-of-memory situation causes the page
fault handler to map -ENOMEM to -EFAULT (see fixup code in do_no_context()).
We need to do exactly the same for the kvm gaccess functions.
So __guestaddr_to_user() should just map all error codes to -EFAULT.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
The logic for calculating the value with which we call kvm_set_cr0/4 was
broken (will definitely be visible with nested unrestricted guest mode
support). Also, we performed the check regarding CR0_ALWAYSON too early
when in guest mode.
What really needs to be done on both CR0 and CR4 is to mask out L1-owned
bits and merge them in from L1's guest_cr0/4. In contrast, arch.cr0/4
and arch.cr0/4_guest_owned_bits contain the mangled L0+L1 state and,
thus, are not suited as input.
For both CRs, we can then apply the check against VMXON_CRx_ALWAYSON and
refuse the update if it fails. To be fully consistent, we implement this
check now also for CR4. For CR4, we move the check into vmx_set_cr4
while we keep it in handle_set_cr0. This is because the CR0 checks for
vmxon vs. guest mode will diverge soon when adding unrestricted guest
mode support.
Finally, we have to set the shadow to the value L2 wanted to write
originally.
Reviewed-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Properly set those bits to 1 that the spec demands in case bit 55 of
VMX_BASIC is 0 - like in our case.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
The MIP_ADDRESS state has 2 meanings. If the texture has one sample
per pixel, it's a pointer to the mipmap chain. If the texture has
multiple samples per pixel, it's a pointer to FMASK, a metadata buffer
needed for reading compressed MSAA textures. The mipmap
alignment rules do not apply to FMASK.
Signed-off-by: Marek Olšák <maraeo@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The MC is mostly likely busy (e.g., display requests), not hung
so no need to reset it. Doing an MC reset is tricky and not
particularly reliable. Fixes hangs in certain cases.
Reported-by: Josh Boyer <jwboyer@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
vbios values are wrong leading to colors that are
too bright. Use the default values instead.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Avoids splatter if the interrupt handler is not registered due
to acceleration being disabled.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Jerome Glisse <jglisse@redhat.com>
Cc: stable@vger.kernel.org
Recent GCC versions (e.g. GCC-4.7.2) perform optimizations based on
assumptions about the implementation of memset and similar functions.
The current ARM optimized memset code does not return the value of
its first argument, as is usually expected from standard implementations.
For instance in the following function:
void debug_mutex_lock_common(struct mutex *lock, struct mutex_waiter *waiter)
{
memset(waiter, MUTEX_DEBUG_INIT, sizeof(*waiter));
waiter->magic = waiter;
INIT_LIST_HEAD(&waiter->list);
}
compiled as:
800554d0 <debug_mutex_lock_common>:
800554d0: e92d4008 push {r3, lr}
800554d4: e1a00001 mov r0, r1
800554d8: e3a02010 mov r2, #16 ; 0x10
800554dc: e3a01011 mov r1, #17 ; 0x11
800554e0: eb04426e bl 80165ea0 <memset>
800554e4: e1a03000 mov r3, r0
800554e8: e583000c str r0, [r3, #12]
800554ec: e5830000 str r0, [r3]
800554f0: e5830004 str r0, [r3, #4]
800554f4: e8bd8008 pop {r3, pc}
GCC assumes memset returns the value of pointer 'waiter' in register r0; causing
register/memory corruptions.
This patch fixes the return value of the assembly version of memset.
It adds a 'mov' instruction and merges an additional load+store into
existing load/store instructions.
For ease of review, here is a breakdown of the patch into 4 simple steps:
Step 1
======
Perform the following substitutions:
ip -> r8, then
r0 -> ip,
and insert 'mov ip, r0' as the first statement of the function.
At this point, we have a memset() implementation returning the proper result,
but corrupting r8 on some paths (the ones that were using ip).
Step 2
======
Make sure r8 is saved and restored when (! CALGN(1)+0) == 1:
save r8:
- str lr, [sp, #-4]!
+ stmfd sp!, {r8, lr}
and restore r8 on both exit paths:
- ldmeqfd sp!, {pc} @ Now <64 bytes to go.
+ ldmeqfd sp!, {r8, pc} @ Now <64 bytes to go.
(...)
tst r2, #16
stmneia ip!, {r1, r3, r8, lr}
- ldr lr, [sp], #4
+ ldmfd sp!, {r8, lr}
Step 3
======
Make sure r8 is saved and restored when (! CALGN(1)+0) == 0:
save r8:
- stmfd sp!, {r4-r7, lr}
+ stmfd sp!, {r4-r8, lr}
and restore r8 on both exit paths:
bgt 3b
- ldmeqfd sp!, {r4-r7, pc}
+ ldmeqfd sp!, {r4-r8, pc}
(...)
tst r2, #16
stmneia ip!, {r4-r7}
- ldmfd sp!, {r4-r7, lr}
+ ldmfd sp!, {r4-r8, lr}
Step 4
======
Rewrite register list "r4-r7, r8" as "r4-r8".
Signed-off-by: Ivan Djelic <ivan.djelic@parrot.com>
Reviewed-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
To use the tracing snapshot feature, writing a '1' into the snapshot
file causes the snapshot buffer to be allocated if it has not already
been allocated and dose a 'swap' with the main buffer, so that the
snapshot now contains what was in the main buffer, and the main buffer
now writes to what was the snapshot buffer.
To free the snapshot buffer, a '0' is written into the snapshot file.
To clear the snapshot buffer, any number but a '0' or '1' is written
into the snapshot file. But if the file is not allocated it returns
-EINVAL error code. This is rather pointless. It is better just to
do nothing and return success.
Acked-by: Hiraku Toyooka <hiraku.toyooka.gu@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
When cat'ing the snapshot file, instead of showing an empty trace
header like the trace file does, show how to use the snapshot
feature.
Also, this is a good place to show if the snapshot has been allocated
or not. Users may want to "pre allocate" the snapshot to have a fast
"swap" of the current buffer. Otherwise, a swap would be slow and might
fail as it would need to allocate the snapshot buffer, and that might
fail under tight memory constraints.
Here's what it looked like before:
# tracer: nop
#
# entries-in-buffer/entries-written: 0/0 #P:4
#
# _-----=> irqs-off
# / _----=> need-resched
# | / _---=> hardirq/softirq
# || / _--=> preempt-depth
# ||| / delay
# TASK-PID CPU# |||| TIMESTAMP FUNCTION
# | | | |||| | |
Here's what it looks like now:
# tracer: nop
#
#
# * Snapshot is freed *
#
# Snapshot commands:
# echo 0 > snapshot : Clears and frees snapshot buffer
# echo 1 > snapshot : Allocates snapshot buffer, if not already allocated.
# Takes a snapshot of the main buffer.
# echo 2 > snapshot : Clears snapshot buffer (but does not allocate)
# (Doesn't have to be '2' works with any number that
# is not a '0' or '1')
Acked-by: Hiraku Toyooka <hiraku.toyooka.gu@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
hid_output_raw_report() makes a direct call to usb_control_msg(). However,
some USB3 boards have shown that the usb device is not ready during the
.probe(). This blocks the entire usb device, and the paired mice, keyboards
are not functional. The dmesg output is the following:
[ 11.912287] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-2/input2
[ 11.912537] logitech-djreceiver 0003:046D:C52B.0003: logi_dj_probe:logi_dj_recv_query_paired_devices error:-32
[ 11.912636] logitech-djreceiver: probe of 0003:046D:C52B.0003 failed with error -32
Relying on the scheduled call to usbhid_submit_report() fixes the problem.
related bugs:
10720821039143https://bugzilla.redhat.com/show_bug.cgi?id=840391https://bugzilla.kernel.org/show_bug.cgi?id=49781
Reported-and-tested-by: Bob Bowles <bobjohnbowles@gmail.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Set card->private_data in snd_ice1712_create for fixing NULL
dereference in snd_ice1712_remove().
Signed-off-by: Sean Connor <sconnor004@allyinics.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The delayed inode code batches up changes to the btree in hopes of doing
them in bulk. As the changes build up, processes kick off worker
threads and wait for them to make progress.
The current code kicks off an async work queue item for each delayed
node, which creates a lot of churn. It also uses a fixed 1 HZ waiting
period for the throttle, which allows us to build a lot of pending
work and can slow down the commit.
This changes us to watch a sequence counter as it is bumped during the
operations. We kick off fewer work items and have each work item do
more work.
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
This patch fixes some annoying messages like 'Error reading PHY register' and
'Hardware Erorr' and saves several seconds on reboot.
Cc: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Borislav Petkov <bp@suse.de>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
This patch removes redundant actions from driver and fixes its interaction
with actions in pci-bus runtime power management code.
It removes pci_save_state() from __e1000_shutdown() for normal adapters,
PCI bus callbacks pci_pm_*() will do all this for us. Now __e1000_shutdown()
switches to D3-state only quad-port adapters, because they needs quirk for
clearing false-positive error from downsteam pci-e port.
pci_save_state() now called after clearing bus-master bit, thus __e1000_resume()
and e1000_io_slot_reset() must set it back after restoring configuration space.
This patch set get_link_status before calling pm_runtime_put() in e1000_open()
to allow e1000_idle() get real link status and schedule first runtime suspend.
This patch also enables wakeup for device if management mode is enabled
(like for WoL) as result pci_prepare_to_sleep() would setup wakeup without
special actions like custom 'enable_wakeup' sign.
Cc: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Borislav Petkov <bp@suse.de>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
This patch removes redundant and unbalanced pci_disable_device() from
__e1000_shutdown(). pci_clear_master() is enough, device can go into
suspended state with elevated enable_cnt.
Bug was introduced in commit 23606cf5d1
("e1000e / PCI / PM: Add basic runtime PM support (rev. 4)") in v2.6.35
Cc: Bruce Allan <bruce.w.allan@intel.com>
CC: Stable <stable@kernel.org>
Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Borislav Petkov <bp@suse.de>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Add missing MODULE_ALIAS_FS("ocfs2") how did I miss that?
Remove unnecessary MODULE_ALIAS_FS("devpts") devpts can not be modular.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Let the bus code process scm availability information and
notify scm device drivers about the new state.
Reviewed-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Stop writing to scm after certain error conditions such as a concurrent
firmware upgrade. Resume to normal state once scm_blk_set_available is
called (due to an scm availability notification).
Reviewed-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Extend the notify callback of scm_driver by an event parameter
to allow to distinguish between different notifications.
Reviewed-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
If a block device driver cannot fetch all requests from the blocklayer
it's in his responsibility to call the request function at a later time.
Normally this would be done after the next irq for the underlying device
is handled. However in situations where we have no outstanding request
we have to schedule the request function for a later time.
This is determined using an internal counter of requests issued to the
hardware.
In some cases where we give a request back to the block layer unhandled
the number of queued requests was not adjusted. Fix this class of
failures by adjusting queued_requests in all functions used to give
a request back to the block layer.
Reviewed-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Move the zero check `hda_frame_size_words == 0' before the modulus
`buffer_size_words % hda_frame_size_words'.
Also remove the redundant null check `buffer_addx == NULL'.
Signed-off-by: Xi Wang <xi.wang@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
If the new control cannot be created, this function will return to avoid
snd_hda_ctl_add dereferencing a NULL control pointer.
Signed-off-by: Mengdong Lin <mengdong.lin@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
If the SPDIF control array cannot be reallocated, the function
will return to avoid dereferencing a NULL pointer.
Signed-off-by: Mengdong Lin <mengdong.lin@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A few driver fixes, none of them terribly dramatic.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=Yton
-----END PGP SIGNATURE-----
Merge tag 'asoc-v3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v3.9
A few driver fixes, none of them terribly dramatic.
