Some JIT compilers allocate memory for generated code with
posix_memalign() + mprotect() so we need to hook into mprotect()
to make sure 'perf' is aware that we're executing code in
anonymous memory.
[ penberg@cs.helsinki.fi: move the hook to sys_mprotect() ]
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
LKML-Reference: <Pine.LNX.4.64.0906082111030.12407@melkki.cs.Helsinki.FI>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Fill in amd_hw_cache_event_id[] with the AMD CPU specific events,
for family 0x0f, 0x10 and 0x11.
There's apparently no distinction between load and store events, so
we only fill in the load events.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Our async work synchronization was broken by "async: make sure
independent async domains can't accidentally entangle" (commit
d5a877e8dd), because it would report
the wrong lowest active async ID when there was both running and
pending async work.
This caused things like no being able to read the root filesystem,
resulting in missing console devices and inability to run 'init',
causing a boot-time panic.
This fixes it by properly returning the lowest pending async ID: if
there is any running async work, that will have a lower ID than any
pending work, and we should _not_ look at the pending work list.
There were alternative patches from Jaswinder and James, but this one
also cleans up the code by removing the pointless 'ret' variable and
the unnecesary testing for an empty list around 'for_each_entry()' (if
the list is empty, the for_each_entry() thing just won't execute).
Fixes-bug: http://bugzilla.kernel.org/show_bug.cgi?id=13474
Reported-and-tested-by: Chris Clayton <chris2553@googlemail.com>
Cc: Jaswinder Singh Rajput <jaswinder@kernel.org>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Using gcc 3.3.5 a "make allmodconfig" + "CONFIG_KVM=n"
triggers a build error:
arch/x86/mm/built-in.o(.init.text+0x43f7): In function `__change_page_attr':
arch/x86/mm/pageattr.c:114: undefined reference to `__udivdi3'
make: *** [.tmp_vmlinux1] Error 1
The culprit turned out to be a division in arch/x86/mm/memtest.c
For more info see this thread:
http://marc.info/?l=linux-kernel&m=124416232620683
The patch entirely removes the division that caused the build
error.
[ Impact: build fix with certain GCC versions ]
Reported-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: xiyou.wangcong@gmail.com
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: <stable@kernel.org>
LKML-Reference: <20090608170939.GB12431@alberich.amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Fix bug in the SGI UV macros that support systems with multiple
coherency domains. The macros used for referencing global MMR
(chipset registers) are failing to correctly "or" the NASID
(node identifier) bits that reside above M+N. These high bits
are supplied automatically by the chipset for memory accesses
coming from the processor socket.
However, the bits must be present for references to the special
global MMR space used to map chipset registers. (See uv_hub.h
for more details ...)
The bug results in references to invalid/incorrect nodes.
Signed-off-by: Jack Steiner <steiner@sgi.com>
Cc: <stable@kernel.org>
LKML-Reference: <20090608154405.GA16395@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The dx_map_entry structure doesn't support over 64KB block size by
current usage of its member("offs"). Because "offs" treats an offset
of copies of the ext4_dir_entry_2 structure as is. This member size is
16 bits. But real offset for over 64KB(256KB) block size needs 18
bits. However, real offset keeps 4 byte boundary, so lower 2 bits is
not used.
Therefore, we do the following to fix this limitation:
For "store":
we divide the real offset by 4 and then store this result to "offs"
member.
For "use":
we multiply "offs" member by 4 and then use this result
as real offset.
Signed-off-by: Toshiyuki Okajima <toshi.okajima@jp.fujitsu.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus:
MIPS: Outline udelay and fix a few issues.
MIPS: ioctl.h: Fix headers_check warnings
MIPS: Cobalt: PCI bus is always required to obtain the board ID
MIPS: Kconfig: Remove "Support for" from Cavium system type
MIPS: Sibyte: Honor CONFIG_CMDLINE
SSB: BCM47xx: Export ssb_watchdog_timer_set
The previous patch submission had a I typo I didn't catch but Bartlomiej
noted. Guess this proves the point about any patch being risky late in an rc
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Outlining fixes the issue were on certain CPUs such as the R10000 family
the delay loop would need an extra cycle if it overlaps a cacheline
boundary.
The rewrite also fixes build errors with GCC 4.4 which was changed in
way incompatible with the kernel's inline assembly.
Relying on pure C for computation of the delay value removes the need for
explicit. The price we pay is a slight slowdown of the computation - to
be fixed on another day.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Make ioctl.h compatible with asm-generic/ioctl.h and userspace
fix the following 'make headers_check' warning:
usr/include/asm-mips/ioctl.h:64: extern's make no sense in userspace
Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
this patch export ssb_watchdog_timer_set to allow to use it in a Linux
watchdog driver.
Signed-off-by: Matthieu CASTET <castet.matthieu@free.fr>
Acked-by : Michael Buesch <mb@bu3sch.de>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* master.kernel.org:/home/rmk/linux-2.6-arm:
[ARM] 5543/1: arm: serial amba: add missing declaration in serial.h
[ARM] pxa: fix pxa27x_udc default pullup GPIO
[ARM] pxa/imote2: fix UCAM sensor board ADC model number
mx[23]: don't put clock lookups in __initdata
fix oops when using console=ttymxcN with N > 0
[ARM] ARMv7 errata: only apply fixes when running on applicable CPU
[ARM] 5534/1: kmalloc must return a cache line aligned buffer
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc:
sdhci-of: Fix the wrong accessor to HOSTVER register
mvsdio: fix config failure with some high speed SDHC cards
mvsdio: ignore high speed timing requests from the core
mmc/omap: Use disable_irq_nosync() from within irq handlers.
sdhci-of: Add fsl,esdhc as a valid compatible to bind against
mvsdio: allow automatic loading when modular
mxcmmc: Fix missing return value checking in DMA setup code.
mxcmmc : Reset the SDHC hardware if software timeout occurs.
omap_hsmmc: Trivial fix for a typo in comment
mxcmmc: decrease minimum frequency to make MMC cards work
This patch makes the driver_filter function more readable by
reorganizing the code. The removal of a code code block to an upper
indentation level makes hard-to-read line-wraps unnecessary.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
There is no need to disable/enable irqs on each loop iteration. Just
disable irqs for the whole time the loop runs.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
The pr_* macros are shorter than the old printk(KERN_ ...) variant.
Change the dma-debug code to use the new macros and save a few
unnecessary line breaks. If lines don't break the source code can also
be grepped more easily.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
This patch changes the recent updates to dma-debug to conform with
coding style guidelines of Linux and the -tip tree.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Last patch series introduced some new comment which does not fit the
Kernel comment style guidelines. Fix it with this patch.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Standardize and tidy up all the messages we print during
perfcounter initialization.
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Fill in core2_hw_cache_event_id[] with the Atom model specific events.
The events can be used in all the tools via the -e (--event) parameter,
for example "-e l1-misses" or -"-e l2-accesses" or "-e l2-write-misses".
( Note: these are straight from the Intel manuals - not tested yet.)
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Fill in core2_hw_cache_event_id[] with the Core2 model specific events.
The events can be used in all the tools via the -e (--event) parameter,
for example "-e l1-misses" or -"-e l2-accesses" or "-e l2-write-misses".
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Under CONFIG_MAXSMP, cpus_hardware_enabled is allocated from the heap and
not statically initialized. This causes a crash on reboot when kvm thinks
vmx is enabled on random nonexistent cpus and accesses nonexistent percpu
lists.
Fix by explicitly clearing the variable.
Cc: stable@kernel.org
Reported-and-tested-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Avi Kivity <avi@redhat.com>
Before:
$ perf report
failed to open file: No such file or directory
After:
$ perf report
failed to open file: perf.data (try 'perf record' first)
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
If perf is run on a !CONFIG_PERF_COUNTER kernel right now it
bails out with no messages or with confusing messages.
Standardize this case some more and explain the situation.
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
On architectures/CPUs without PMU support but with perfcounters
enabled 'perf record' currently fails because it cannot create a
cycle based hw-perfcounter.
Fall back to the cpu-clock-tick sw-perfcounter in this case, which
is hrtimer based and will always work (as long as perfcounters
are enabled).
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
On architectures/CPUs without PMU support but with perfcounters
enabled 'perf top' currently fails because it cannot create a
cycle based hw-perfcounter.
Fall back to the cpu-clock-tick sw-perfcounter in this case, which
is hrtimer based and will always work (as long as perfcounters
is enabled).
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This header is sometimes included in the uncompress stage to get
register values, but no <linux/amba/bus.h> can be included there.
So declare "struct amba_device" here before using it in a prototype.
Signed-off-by: Alessandro Rubini <rubini@unipv.it>
Acked-by: Andrea Gallo <andrea.gallo@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Before:
$ perf stat ~/hackbench 5
error: syscall returned with -1 (No such device)
After:
$ perf stat ~/hackbench 5
Time: 1.640
Performance counter stats for '/home/mingo/hackbench 5':
6524.570382 task-clock-ticks # 3.838 CPU utilization factor
35704 context-switches # 0.005 M/sec
191 CPU-migrations # 0.000 M/sec
8958 page-faults # 0.001 M/sec
<not counted> cycles
<not counted> instructions
<not counted> cache-references
<not counted> cache-misses
Wall-clock time elapsed: 1699.999995 msecs
Also add -v (--verbose) option to allow the printing of failed
counter opens.
Plus dont print 'inf' if wall-time is zero (due to jiffies granularity),
instead skip the printing of the CPU utilization factor.
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
vfree() does its own 'NULL' check, so no need for check before
calling it.
In v2, remove the stray newline.
[ Impact: cleanup ]
Signed-off-by: Figo.zhang <figo1802@gmail.com>
Cc: Dmitry Adamushko <dmitry.adamushko@gmail.com>
LKML-Reference: <1244385036.3402.11.camel@myhost>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This fixes a stack corruption panic or null dereference oops
due to a bad GS in resume_userspace() when returning from
sys_vm86() and calling lockdep_sys_exit().
Only a problem when CONFIG_LOCKDEP and CONFIG_CC_STACKPROTECTOR
enabled.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Cc: H. Peter Anvin <hpa@zytor.com>
LKML-Reference: <1244384628.2323.4.camel@bimbo>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Ingo Molnar reported that read_apic is buggy novadays:
[ 0.000000] Using APIC driver default
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic"
[ 0.000000] APIC: disable apic facility
[ 0.000000] ------------[ cut here ]------------
[ 0.000000] WARNING: at arch/x86/kernel/apic/apic.c:254 native_apic_read_dummy+0x2d/0x3b()
[ 0.000000] Hardware name: HP OmniBook PC
Indeed we still rely on apic->read operation for SMP compiled
kernel. And instead of disfigure the SMP code with #ifdef we
allow to call apic->read. To capture any unexpected results
we check for apic->read being called for sane reason via
WARN_ON_ONCE but(!) instead of OR we should use AND logical
operation (thanks Yinghai for spotting the root of the problem).
Along with that we could be have bad MP table and we are
to fix it that way no SMP started and no complains about
BIOS bug if apic was just disabled via command line.
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <20090607124840.GD4547@lenovo>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The Dell Optiplex 360 hangs on reboot, just like the Optiplex 330, so
the same quirk is needed.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: Steve Conklin <steve.conklin@canonical.com>
Cc: Leann Ogasawara <leann.ogasawara@canonical.com>
Cc: <stable@kernel.org>
LKML-Reference: <200906051202.38311.jdelvare@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
pdc202xx_reset() calls pdc202xx_reset_host() twice, for both channels, while
that function actually twiddles the single, shared software reset bit -- the
net effect is a duplicated reset and horrendous 4 second delay happening not
only on a channel reset but also when dma_lost_irq() and dma_clear() methods
are called. Fold pdc202xx_reset_host() into pdc202xx_reset(), fix printk(),
and move it before the actual reset...
Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Commit ac95beedf8 (ide: add struct ide_port_ops
(take 2)) erroneously converted the driver's dma_timeout() and dma_lost_irq()
methods to call the driver's resetproc() method regardless of whether it was
defined for this specific controller while it hadn't been defined and hence
called for PDC20246. So the dma_clear() method, the successor of dma_timeout(),
shouldn't exist and the dma_lost_irq() method should be standard for PDC20246.
Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Remove model information, encoding/decoding and reduce bookkeeping.
This, besides removing a lot of code and cleaning up the code, also
enables these features on many more CPUs that were enumerated before.
Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
LKML-Reference: <1244224637.8212.6.camel@ht.satnam>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Merge reason: This branch was on an -rc5 base so pull almost-2.6.30
to resync with the latest upstream fixes and make sure
the combination works fine.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Some device drivers map the same physical address multiple times to a
dma address. Without an IOMMU this results in the same dma address being
put into the dma-debug hash multiple times. With a first-fit match in
hash_bucket_find() this function may return the wrong dma_debug_entry.
This can result in false positive warnings. This patch fixes it by
changing the first-fit behavior of hash_bucket_find() into a best-fit
algorithm.
Reported-by: Torsten Kaiser <just.for.lkml@googlemail.com>
Reported-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Cc: lethal@linux-sh.org
Cc: just.for.lkml@googlemail.com
Cc: hancockrwd@gmail.com
Cc: jens.axboe@oracle.com
Cc: bharrosh@panasas.com
Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: <stable@kernel.org>
LKML-Reference: <20090605104132.GE24836@amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The first snapshot reading often occur before any events have
been read in the mapped perfcounter files.
Just wait until we have at least one event before starting the
snapshot, or the delay before the first set of entries to be
displayed may be long in case of low refresh rate.
Note: we could also use a semaphore to wait before
"print_entries" number of eveents is reached, but again this
value is tunable and we can't ensure we will even reach it.
Also we could base on a default mimimum set of entries for the
first refresh, say 15, but again, the minimal sample is
tunable, and we could end up displaying nothing until we have a
minimal default set of events, which can take some time in case
of high samples filters.
Hence this simple solution which partially covers the default
case.
[ Impact: fix display artifacts in perf top ]
Signed-off-by: Frederic Weisbecker <fweisbeec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <1244322643-6447-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6:
x86/pci: fix mmconfig detection with 32bit near 4g
PCI: use fixed-up device class when configuring device
CONFIG_IMA=y inode activity leaks iint_cache and radix_tree_node objects
until the system runs out of memory. Nowhere is calling ima_inode_free()
a.k.a. ima_iint_delete(). Fix that by calling it from destroy_inode().
Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
