Several Lenovo users have reported problems with their Sierra
Wireless EM7455 modem. The driver has loaded successfully and
the MBIM management channel has appeared to work, including
establishing a connection to the mobile network. But no frames
have been received over the data interface.
The problem affects all EM7455 and MC7455, and is assumed to
affect other modems based on the same Qualcomm chipset and
baseband firmware.
Testing narrowed the problem down to what seems to be a
firmware timing bug during initialization. Adding a short sleep
while probing is sufficient to make the problem disappear.
Experiments have shown that 1-2 ms is too little to have any
effect, while 10-20 ms is enough to reliably succeed.
Reported-by: Stefan Armbruster <ml001@armbruster-it.de>
Reported-by: Ralph Plawetzki <ralph@purejava.org>
Reported-by: Andreas Fett <andreas.fett@secunet.com>
Reported-by: Rasmus Lerdorf <rasmus@lerdorf.com>
Reported-by: Samo Ratnik <samo.ratnik@gmail.com>
Reported-and-tested-by: Aleksander Morgado <aleksander@aleksander.es>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
If register_pernet_subsys() fails, we shouldn't try to call
unregister_pernet_subsys().
Fixes: 467fa15356 ("RDS-TCP: Support multiple RDS-TCP listen endpoints, one per netns.")
Cc: stable@vger.kernel.org
Cc: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Acked-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
User's values from .perfconfig could overload the default callchain
setup and cause this test to fail. Making sure the test is using
default callchain_param values.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1467634583-29147-3-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Storing NUMA info within struct numa_node instead of strings. This way
it's usable in future patches.
Also it turned out it's slightly less code involved than using strings.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1467634583-29147-2-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf buildid-cache --add <binary> scans given binary and add
the SDT events to probe cache. "sdt_" prefix is appended for
all SDT providers to avoid event-name clash with other pre-defined
events. It is possible to use the cached SDT events as other cached
events, via perf probe --add "sdt_<provider>:<event>=<event>".
e.g.
----
# perf buildid-cache --add /lib/libc-2.17.so
# perf probe --cache --list | head -n 5
/usr/lib/libc-2.17.so (a6fb821bdf53660eb2c29f778757aef294d3d392):
sdt_libc:setjmp=setjmp
sdt_libc:longjmp=longjmp
sdt_libc:longjmp_target=longjmp_target
sdt_libc:memory_heap_new=memory_heap_new
# perf probe -x /usr/lib/libc-2.17.so \
-a sdt_libc:memory_heap_new=memory_heap_new
Added new event:
sdt_libc:memory_heap_new (on memory_heap_new
in /usr/lib/libc-2.17.so)
You can now use it in all perf tools, such as:
perf record -e sdt_libc:memory_heap_new -aR sleep 1
# perf probe -l
sdt_libc:memory_heap_new (on new_heap+183 in /usr/lib/libc-2.17.so)
----
Note that SDT event entries in probe-cache file is somewhat different
from normal cached events. Normal one starts with "#", but SDTs are
starting with "%".
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/146736025058.27797.13043265488541434502.stgit@devbox
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Allow user to set group name for adding new event. Note that user must
ensure that the group name doesn't conflict with existing group name
carefully.
E.g. Existing group name can conflict with other events. Especially,
using the group name reserved for kernel modules can hide kernel
embedded events when loading modules.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/146736024091.27797.9471545190066268995.stgit@devbox
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch serves the initial support to identify and list SDT events in
binaries. When programs containing SDT markers are compiled, gcc with
the help of assembler directives identifies them and places them in the
section ".note.stapsdt".
To find these markers from the binaries, one needs to traverse through
this section and parse the relevant details like the name, type and
location of the marker. Also, the original location could be skewed due
to the effect of prelinking. If that is the case, the locations need to
be adjusted.
The functions in this patch open a given ELF, find out the SDT section,
parse the relevant details, adjust the location (if necessary) and
populate them in a list.
A typical note entry in ".note.stapsdt" section is as follows :
|--nhdr.n_namesz--|
------------------------------------
| nhdr | "stapsdt" |
----- |----------------------------------|
| | <location> <base_address> |
| | <semaphore> |
nhdr.n_descsize | "provider_name" "note_name" |
| | <args> |
----- |----------------------------------|
| nhdr | "stapsdt" |
|...
The above shows an excerpt from the section ".note.stapsdt". 'nhdr' is
a structure which has the note name size (n_namesz), note description
size (n_desc_sz) and note type (n_type).
So, in order to parse the note note info, we need nhdr to tell us where
to start from. As can be seen from <sys/sdt.h>, the name of the SDT
notes given is "stapsdt". But this is not the identifier of the note.
After that, we go to description of the note to find out its location, the
address of the ".stapsdt.base" section and the semaphore address.
Then, we find the provider name and the SDT marker name and then follow the
arguments.
Signed-off-by: Hemant Kumar <hemant@linux.vnet.ibm.com>
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/146736022628.27797.1201368329092908163.stgit@devbox
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
That appeared after 0.140, and will be used in the SDT code, so, to
avoid bisection break on older systems, add a feature detection and
provide a stub with a pr_debug() to keep it building.
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/n/tip-80y0eldgweorqnwha9rvfxjr@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
For ipv6+udp+geneve encapsulation data, the max_mtu should subtract
sizeof(ipv6hdr), instead of sizeof(iphdr).
Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The tree has been in the same location for a long time. Putting it in
MAINTAINERS makes it easy for those new to, or less familiar with IIO
to find the correct tree to base patches on.
Mostly basing on staging-next is fine as well unless working on a very
active driver.
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Some static channels are explicitly initialized with default values.
Remove them to enhance readability.
Signed-off-by: Gregor Boirie <gregor.boirie@parrot.com>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Enable support for triggered buffering of temperature samples.
Signed-off-by: Gregor Boirie <gregor.boirie@parrot.com>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Details scaling factors and offsets applied to raw temperature and pressure
samples.
Signed-off-by: Gregor Boirie <gregor.boirie@parrot.com>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Sampled pressure data are 24 bits long and should be stored in a 32 bits
word.
Signed-off-by: Gregor Boirie <gregor.boirie@parrot.com>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Ensure triggered buffering memory accesses are properly aligned on per
channel storagebits boundaries.
Signed-off-by: Gregor Boirie <gregor.boirie@parrot.com>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Retire this venerable driver as the basic support is now in the
generic st-sensors accelerometer driver.
There are a few missing features in the new driver:
* Threshold events.
* Access to the calibration adjustment registers (patch shortly)
In exchange it brings a cleaner and more maintainable code base that actually
gets tested more than once every few years. I'll actually be suprised
if anyone other than me has a board with one of these on that is running
an up to date kernel.
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Time to finally kill off the venerable (it was one of my first drivers)
lis3l02dq driver in favour of adding support in the st sensors framework.
This does loose us the event support that driver always had, but I think
that will reappear at some point and in the meantime the maintenance
advantages of dropping the 'special' driver for this one part outweigh
the issues.
It's worth noting this part is ancient and I may well be the only person
who still has any on hardware running recent kernels.
It has a few 'quirks'.
- No WAI register so that just became optional.
- A BDU option that really does block updates. Completely.
Whatever you do, you don't get any more data with it set.
It is documented the same as more modern parts but I presume they
are actually clearing for updates after a read of both bytes!
- Fixed scale.
- It's too quick. Even at slowest rate (280Hz) I can't read out fast
enough on my board (stargate 2) to beat new data coming in. Linus'
repeat read patch doesn't help in this case. It just means I get 10
readings before dying... So in reality this will get used with
software triggers only unless someone has this long out of production
device on a quick board.
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Denis CIOCCA <denis.ciocca@st.com>
Cc: Crestez Dan Leonard <leonard.crestez@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
This reverts commit 923b93e451.
Make sure consumers do not overwrite gpio flags for pins that have
already been claimed.
While adding support for gpio drivers to refuse a request using
unsupported flags, the order of when the requested flag was checked and
the new flags were applied was reversed to that consumers could
overwrite flags for already requested gpios.
This not only affects device-tree setups where two drivers could request
the same gpio using conflicting configurations, but also allowed user
space to clear gpio flags for already claimed pins simply by attempting
to export them through the sysfs interface. By for example clearing the
FLAG_ACTIVE_LOW flag this way, user space could effectively change the
polarity of a signal.
Reverting this change obviously prevents gpio drivers from doing sanity
checks on the flags in their request callbacks. Fortunately only one
recently added driver (gpio-tps65218 in v4.6) appears to do this, and a
follow up patch could restore this functionality through a different
interface.
Cc: stable <stable@vger.kernel.org> # 4.4
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This fixes the issue descirbe in bug 117531
(https://bugzilla.kernel.org/show_bug.cgi?id=117531).
It's a regression introduced in linux 4.5 that causes a Oops at load of
gpio_sch and prevents powering off the computer.
The issue is that sch_gpio_reg_set is called in sch_gpio_probe before
gpio_chip data is initialized with the pointer to the sch_gpio struct. As
sch_gpio_reg_set calls gpiochip_get_data, it returns NULL which causes
the Oops.
The patch follows Mika's advice (https://lkml.org/lkml/2016/5/9/61) and
consists in modifying sch_gpio_reg_get and sch_gpio_reg_set to take a
sch_gpio struct directly instead of a gpio_chip, which avoids the call to
gpiochip_get_data.
Thanks Mika for your patience with me :-)
Cc: stable@vger.kernel.org
Signed-off-by: Colin Pitrat <colin.pitrat@gmail.com>
Acked-by: Alexandre Courbot <acourbot@nvidia.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Right now when a new overlay inode is created, we initialize overlay
inode's ->i_mode from underlying inode ->i_mode but we retain only
file type bits (S_IFMT) and discard permission bits.
This patch changes it and retains permission bits too. This should allow
overlay to do permission checks on overlay inode itself in task context.
[SzM] It also fixes clearing suid/sgid bits on write.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Reported-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Fixes: 4bacc9c923 ("overlayfs: Make f_path always point to the overlay and f_inode to the underlay")
Cc: <stable@vger.kernel.org>
Before 4bacc9c923 ("overlayfs: Make f_path...") file->f_path pointed to
the underlying file, hence suid/sgid removal on write worked fine.
After that patch file->f_path pointed to the overlay file, and the file
mode bits weren't copied to overlay_inode->i_mode. So the suid/sgid
removal simply stopped working.
The fix is to copy the mode bits, but then ovl_setattr() needs to clear
ATTR_MODE to avoid the BUG() in notify_change(). So do this first, then in
the next patch copy the mode.
Reported-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Fixes: 4bacc9c923 ("overlayfs: Make f_path always point to the overlay and f_inode to the underlay")
Cc: <stable@vger.kernel.org>
virq is not required to be the same for all msi descs. Use the base irq number
from the desc in the debug printk.
Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
If devm_add_action() fails we are explicitly calling the cleanup to free
the resources allocated. Lets use the helper devm_add_action_or_reset()
and return directly in case of error, as we know that the cleanup function
has been already called by the helper if there was any error.
Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
The A31 companion pmic (axp221) does not generate vbus change interrupts
when the board is driving vbus, so we must poll when using the pmic for
vbus-det _and_ we're driving vbus.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
kzalloc will issue its own error message including a dump_stack()
so remote the site specific message.
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
kzalloc will issue its own error message including a dump_stack()
so remote the site specific message.
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
The usb-phy is fully enclosed in the general register files (GRF).
Therefore as seen from the device-tree it shouldn't be a separate
platform-device but instead a sub-device of the GRF - using the
simply-mfd mechanism.
As the usb-phy is part of the kernel for some releases now, we keep
the old (and now deprecated) binding for compatibility purposes.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
This is a new phy driver for the SoC USB controllers on the TI DA8xx
family of microcontrollers. The USB 1.1 PHY is just a simple on/off.
The USB 2.0 PHY also allows overriding the VBUS and ID pins.
Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Device tree binding for new phy-da8xx-usb driver.
Signed-off-by: David Lechner <david@lechnology.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Snooze is a poll idle state in powernv and pseries platforms. Snooze
has a timeout so that if a CPU stays in snooze for more than target
residency of the next available idle state, then it would exit
thereby giving chance to the cpuidle governor to re-evaluate and
promote the CPU to a deeper idle state. Therefore whenever snooze
exits due to this timeout, its last_residency will be target_residency
of the next deeper state.
Commit e93e59ce5b "cpuidle: Replace ktime_get() with local_clock()"
changed the math around last_residency calculation. Specifically,
while converting last_residency value from nano- to microseconds, it
carries out right shift by 10. Because of that, in snooze timeout
exit scenarios last_residency calculated is roughly 2.3% less than
target_residency of the next available state. This pattern is picked
up by get_typical_interval() in the menu governor and therefore
expected_interval in menu_select() is frequently less than the
target_residency of any state other than snooze.
Due to this we are entering snooze at a higher rate, thereby
affecting the single thread performance.
Fix this by using more precise division via ktime_us_delta().
Fixes: e93e59ce5b "cpuidle: Replace ktime_get() with local_clock()"
Reported-by: Anton Blanchard <anton@samba.org>
Bisected-by: Shilpasri G Bhat <shilpa.bhat@linux.vnet.ibm.com>
Signed-off-by: Shreyas B. Prabhu <shreyas@linux.vnet.ibm.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The user timer tu->qused counter may go to a negative value when
multiple concurrent reads are performed since both the check and the
decrement of tu->qused are done in two individual locked contexts.
This results in bogus read outs, and the endless loop in the
user-space side.
The fix is to move the decrement of the tu->qused counter into the
same spinlock context as the zero-check of the counter.
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The initial use for this is for PHYs that have a mode related to USB OTG.
There are several SoCs (e.g. TI OMAP and DA8xx) that have a mode setting
in the USB PHY to override OTG VBUS and ID signals.
Of course, the enum can be expaned in the future to include modes for
other types of PHYs as well.
Suggested-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: David Lechner <david@lechnology.com>
No functional change. Rename "enum phy_mode" to
"enum xgene_phy_mode" in xgene phy driver in
preparation for adding set_mode callback in
phy core.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Reviewed-by: Loc Ho <lho@apm.com>
Per VT-d spec Section 10.4.2 ("Capability Register"), the maximum
number of possible domains is 64K; indeed this is the maximum value
that the cap_ndoms() macro will expand to. Since the value 65536
will not fix in a u16, the 'did' variable must be promoted to an
int, otherwise the test for < 65536 will always be true and the
loop will never end.
The symptom, in my case, was a hung machine during suspend.
Fixes: 3bd4f9112f ("iommu/vt-d: Fix overflow of iommu->domains array")
Signed-off-by: Aaron Campbell <aaron@monkey.org>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Use the affinity hint in the irqdesc allocator. The hint is used to determine
the node for the allocation and to set the affinity of the interrupt.
If multiple interrupts are allocated (multi-MSI) then the allocator iterates
over the cpumask and for each set cpu it allocates on their node and sets the
initial affinity to that cpu.
If a single interrupt is allocated (MSI-X) then the allocator uses the first
cpu in the mask to compute the allocation node and uses the mask for the
initial affinity setting.
Interrupts set up this way are marked with the AFFINITY_MANAGED flag to
prevent userspace from messing with their affinity settings.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: linux-block@vger.kernel.org
Cc: linux-pci@vger.kernel.org
Cc: linux-nvme@lists.infradead.org
Cc: axboe@fb.com
Cc: agordeev@redhat.com
Link: http://lkml.kernel.org/r/1467621574-8277-5-git-send-email-hch@lst.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Pull fuse fix from Miklos Szeredi:
"This makes sure userspace filesystems are not broken by the parallel
lookups and readdir feature"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
fuse: serialize dirops by default
