Commit graph

3463 commits

Author SHA1 Message Date
Tejun Heo
ea1dd4e130 [PATCH] libata: clear only affected flags during ata_dev_configure()
ata_dev_configure() should not clear dynamic device flags determined
elsewhere.  Lower eight bits are reserved for feature flags, define
ATA_DFLAG_CFG_MASK and clear only those bits before configuring
device.  Without this patch, ATA_DFLAG_PIO gets turned off during
revalidation making PIO mode unuseable.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-02 10:09:19 -04:00
Tejun Heo
198e0fed9e [PATCH] libata: rename ATA_FLAG_PORT_DISABLED to ATA_FLAG_DISABLED
Rename ATA_FLAG_PORT_DISABLED to ATA_FLAG_DISABLED for consistency.
(ATA_FLAG_* are always about ports).

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-02 10:09:19 -04:00
Tejun Heo
949b38af40 [PATCH] libata: clean up constants
* Reorder ATA_DFLAG_* such that feature flags determined by
  ata_dev_configure() are on lower bits.  Reserve lower eight bits
  for this purpose and allocate dynamic flags from bit 8.

* Reorder ATA_FLAG_* such that feature flags determined during driver
  initiailization are on bits 0:15, dynamic flags on 16:23 and LLDD
  specific flags on 24:31.

* Kill trailing white space and lower-case an one line comment for
  consistency.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-02 10:09:19 -04:00
Tejun Heo
c43c555c3a [PATCH] libata: ATA_FLAG_IN_EH is not used, kill it
Kill unused flag ATA_FLAG_IN_EH.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-02 10:09:19 -04:00
Tejun Heo
14d2bac187 [PATCH] libata: improve ata_bus_probe()
Improve ata_bus_probe() such that configuration failures are handled
better.  Each device is given ATA_PROBE_MAX_TRIES chances, but any
non-transient error (revalidation failure with -ENODEV, configuration
failure with -EINVAL...) disables the device directly.  Any IO error
results in SATA PHY speed down and ata_set_mode() failure lowers
transfer mode.  The last try always puts a device into PIO-0.

After each failure, the whole port is reset to make sure that the
controller and all the devices are in a known and stable state.  The
reset also applies SATA SPD configuration if necessary.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-02 10:02:57 -04:00
Tejun Heo
1c3fae4d7e [PATCH] libata: implement ap->sata_spd_limit and helpers
ap->sata_spd_limit contrains SATA PHY speed of the port.  It is
initialized to the configured value prior to probing thus preserving
BIOS configured value.  hardreset is responsible for applying SPD
limit and sata_std_hardreset() is updated to do that.  SATA SPD limit
will be used to enhance failure handling during probing and later by
EH.

This patch also normalizes some comments around affected code.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-02 10:02:57 -04:00
Tejun Heo
002c8054fa [PATCH] libata: implement ata_dev_absent()
For the time being we cannot use ata_dev_present() as it was renamed
to ata_dev_enabled() but we still need presence test.  Implement
negation of the test.  Conveniently, the negated result is needed in
more places.  This is suggested by Jeff Garzik.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-02 10:02:57 -04:00
Martin Waitz
a580290c3e Documentation: fix minor kernel-doc warnings
This patch updates the comments to match the actual code.

Signed-off-by: Martin Waitz <tali@admingilde.org>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-04-02 13:59:55 +02:00
Hans Verkuil
9bc7400a9d V4L/DVB (3692): Keep experimental SLICED_VBI defines under an #if 0
The sliced VBI defines added in videodev2.h are removed since requires
more discussion.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-04-02 04:56:04 -03:00
Samuel Thibault
b9ec4e109d Input: add support for Braille devices
- Add KEY_BRL_* input keys and K_BRL_* keycodes;
- Add emulation of how braille keyboards usually combine braille dots
  to the console keyboard driver;
- Add handling of unicode U+28xy diacritics.

Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-04-02 00:10:28 -05:00
Dmitry Torokhov
95d465fd75 Manual merge with Linus.
Conflicts:
	arch/powerpc/kernel/setup-common.c
	drivers/input/keyboard/hil_kbd.c
	drivers/input/mouse/hil_ptr.c
2006-04-02 00:08:05 -05:00
Krzysztof Halasa
58a7ce6442 [PATCH] Goramo PCI200SYN WAN driver subsystem ID patch
Goramo finally got PCI subsystem ID for their PCI200SYN card. The
attached patch adds support for it - cards with old EEPROM data
will emit a warning with URL for update tool.

Signed-off-by: Krzysztof Halasa <khc@pm.waw.pl>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-01 14:32:52 -05:00
Jeff Garzik
6e07e16404 Merge branch 'upstream' 2006-04-01 14:29:12 -05:00
Tejun Heo
e1211e3fa7 [PATCH] libata: implement ata_dev_enabled and disabled()
This patch renames ata_dev_present() to ata_dev_enabled() and adds
ata_dev_disabled().  This is to discern the state where a device is
present but disabled from not-present state.  This disctinction is
necessary when configuring transfer mode because device selection
timing must not be violated even if a device fails to configure.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-01 12:33:45 -05:00
Dmitry Mishin
2722971cbe [NETFILTER]: iptables 32bit compat layer
This patch extends current iptables compatibility layer in order to get
32bit iptables to work on 64bit kernel. Current layer is insufficient due
to alignment checks both in kernel and user space tools.

Patch is for current net-2.6.17 with addition of move of ipt_entry_{match|
target} definitions to xt_entry_{match|target}.

Signed-off-by: Dmitry Mishin <dim@openvz.org>
Acked-off-by: Kirill Korotaev <dev@openvz.org>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-04-01 02:25:19 -08:00
Yasuyuki Kozakai
a89ecb6a2e [NETFILTER]: x_tables: unify IPv4/IPv6 multiport match
This unifies ipt_multiport and ip6t_multiport to xt_multiport.
As a result, this addes support for inversion and port range match
to IPv6 packets.

Signed-off-by: Yasuyuki Kozakai <yasuyuki.kozakai@toshiba.co.jp>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-04-01 02:22:54 -08:00
Yasuyuki Kozakai
dc5ab2faec [NETFILTER]: x_tables: unify IPv4/IPv6 esp match
This unifies ipt_esp and ip6t_esp to xt_esp. Please note that now
a user program needs to specify IPPROTO_ESP as protocol to use esp match
with IPv6. This means that ip6tables requires '-p esp' like iptables.

Signed-off-by: Yasuyuki Kozakai <yasuyuki.kozakai@toshiba.co.jp>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-04-01 02:22:30 -08:00
Kalin KOZHUHAROV
8ba8e95ed1 Fix comments: s/granuality/granularity/
I was grepping through the code and some `grep ganularity -R .` didn't
catch what I thought. Then looking closer I saw the term "granuality"
used in only four places (in comments) and granularity in many more
places describing the same idea. Some other facts:

dictionary.com does not know such a word
define:granuality on google is not found (and pages for granuality are
mostly related to patches to the kernel)
it has not been discussed as a term on LKML, AFAICS (=Can Search)

To be consistent, I think granularity should be used everywhere.

Signed-off-by: Kalin KOZHUHAROV <kalin@thinrope.net>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-04-01 01:41:22 +02:00
Linus Torvalds
4b75679f60 Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6:
  [NET]: Allow skb headroom to be overridden
  [TCP]: Kill unused extern decl for tcp_v4_hash_connecting()
  [NET]: add SO_RCVBUF comment
  [NET]: Deinline some larger functions from netdevice.h
  [DCCP]: Use NULL for pointers, comfort sparse.
  [DECNET]: Fix refcount
2006-03-31 12:52:30 -08:00
Adrian Bunk
a244e1698a [PATCH] fs/namei.c: make lookup_hash() static
As announced, lookup_hash() can now become static.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-31 12:19:01 -08:00
Antonino A. Daplas
a536093a2f [PATCH] fbcon: Fix big-endian bogosity in slow_imageblit()
The monochrome->color expansion routine that handles bitmaps which have
(widths % 8) != 0 (slow_imageblit) produces corrupt characters in big-endian.
This is caused by a bogus bit test in slow_imageblit().

Fix.

This patch may deserve to go to the stable tree.  The code has already been
well tested in little-endian machines.  It's only in big-endian where there is
uncertainty and Herbert confirmed that this is the correct way to go.

It should not introduce regressions.

Signed-off-by: Antonino Daplas <adaplas@pol.net>
Acked-by: Herbert Poetzl <herbert@13thfloor.at>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-31 12:19:00 -08:00
Richard Purdie
6ca017658b [PATCH] backlight: Backlight Class Improvements
Backlight class attributes are currently easy to implement incorrectly.
Moving certain handling into the backlight core prevents this whilst at the
same time makes the drivers simpler and consistent.  The following changes are
included:

The brightness attribute only sets and reads the brightness variable in the
backlight_properties structure.

The power attribute only sets and reads the power variable in the
backlight_properties structure.

Any framebuffer blanking events change a variable fb_blank in the
backlight_properties structure.

The backlight driver has only two functions to implement.  One function is
called when any of the above properties change (to update the backlight
brightness), the second is called to return the current backlight brightness
value.  A new attribute "actual_brightness" is added to return this brightness
as determined by the driver having combined all the above factors (and any
driver/device specific factors).

Additionally, the backlight core takes care of checking the maximum brightness
is not exceeded and of turning off the backlight before device removal.

The corgi backlight driver is updated to reflect these changes.

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-31 12:19:00 -08:00
Eric W. Biederman
3e7e241f8c [PATCH] dcache: Add helper d_hash_and_lookup
It is very common to hash a dentry and then to call lookup.  If we take fs
specific hash functions into account the full hash logic can get ugly.
Further full_name_hash as an inline function is almost 100 bytes on x86 so
having a non-inline choice in some cases can measurably decrease code size.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-31 12:19:00 -08:00
Eric W. Biederman
92476d7fc0 [PATCH] pidhash: Refactor the pid hash table
Simplifies the code, reduces the need for 4 pid hash tables, and makes the
code more capable.

In the discussions I had with Oleg it was felt that to a large extent the
cleanup itself justified the work.  With struct pid being dynamically
allocated meant we could create the hash table entry when the pid was
allocated and free the hash table entry when the pid was freed.  Instead of
playing with the hash lists when ever a process would attach or detach to a
process.

For myself the fact that it gave what my previous task_ref patch gave for free
with simpler code was a big win.  The problem is that if you hold a reference
to struct task_struct you lock in 10K of low memory.  If you do that in a user
controllable way like /proc does, with an unprivileged but hostile user space
application with typical resource limits of 1000 fds and 100 processes I can
trigger the OOM killer by consuming all of low memory with task structs, on a
machine wight 1GB of low memory.

If I instead hold a reference to struct pid which holds a pointer to my
task_struct, I don't suffer from that problem because struct pid is 2 orders
of magnitude smaller.  In fact struct pid is small enough that most other
kernel data structures dwarf it, so simply limiting the number of referring
data structures is enough to prevent exhaustion of low memory.

This splits the current struct pid into two structures, struct pid and struct
pid_link, and reduces our number of hash tables from PIDTYPE_MAX to just one.
struct pid_link is the per process linkage into the hash tables and lives in
struct task_struct.  struct pid is given an indepedent lifetime, and holds
pointers to each of the pid types.

The independent life of struct pid simplifies attach_pid, and detach_pid,
because we are always manipulating the list of pids and not the hash table.
In addition in giving struct pid an indpendent life it makes the concept much
more powerful.

Kernel data structures can now embed a struct pid * instead of a pid_t and
not suffer from pid wrap around problems or from keeping unnecessarily
large amounts of memory allocated.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-31 12:19:00 -08:00
Eric W. Biederman
8c7904a00b [PATCH] task: RCU protect task->usage
A big problem with rcu protected data structures that are also reference
counted is that you must jump through several hoops to increase the reference
count.  I think someone finally implemented atomic_inc_not_zero(&count) to
automate the common case.  Unfortunately this means you must special case the
rcu access case.

When data structures are only visible via rcu in a manner that is not
determined by the reference count on the object (i.e.  tasks are visible until
their zombies are reaped) there is a much simpler technique we can employ.
Simply delaying the decrement of the reference count until the rcu interval is
over.

What that means is that the proc code that looks up a task and later
wants to sleep can now do:

rcu_read_lock();
task = find_task_by_pid(some_pid);
if (task) {
	get_task_struct(task);
}
rcu_read_unlock();

The effect on the rest of the kernel is that put_task_struct becomes cheaper
and immediate, and in the case where the task has been reaped it frees the
task immediate instead of unnecessarily waiting an until the rcu interval is
over.

Cleanup of task_struct does not happen when its reference count drops to
zero, instead cleanup happens when release_task is called.  Tasks can only
be looked up via rcu before release_task is called.  All rcu protected
members of task_struct are freed by release_task.

Therefore we can move call_rcu from put_task_struct into release_task.  And
we can modify release_task to not immediately release the reference count
but instead have it call put_task_struct from the function it gives to
call_rcu.

The end result:

- get_task_struct is safe in an rcu context where we have just looked
  up the task.

- put_task_struct() simplifies into its old pre rcu self.

This reorganization also makes put_task_struct uncallable from modules as
it is not exported but it does not appear to be called from any modules so
this should not be an issue, and is trivially fixed.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-31 12:18:59 -08:00
Andrew Morton
158d9ebd19 [PATCH] resurrect __put_task_struct
This just got nuked in mainline.  Bring it back because Eric's patches use it.

Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-31 12:18:59 -08:00
Con Kolivas
d425b274ba [PATCH] sched: activate SCHED BATCH expired
To increase the strength of SCHED_BATCH as a scheduling hint we can
activate batch tasks on the expired array since by definition they are
latency insensitive tasks.

Signed-off-by: Con Kolivas <kernel@kolivas.org>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-31 12:18:59 -08:00
Con Kolivas
3dee386e14 [PATCH] sched: cleanup task_activated()
The activated flag in task_struct is used to track different sleep types and
its usage is somewhat obfuscated.  Convert the variable to an enum with more
descriptive names without altering the function.

Signed-off-by: Con Kolivas <kernel@kolivas.org>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-31 12:18:58 -08:00
Jack Steiner
db1b1fefc2 [PATCH] sched: reduce overhead of calc_load
Currently, count_active_tasks() calls both nr_running() &
nr_interruptible().  Each of these functions does a "for_each_cpu" & reads
values from the runqueue of each cpu.  Although this is not a lot of
instructions, each runqueue may be located on different node.  Depending on
the architecture, a unique TLB entry may be required to access each
runqueue.

Since there may be more runqueues than cpu TLB entries, a scan of all
runqueues can trash the TLB.  Each memory reference incurs a TLB miss &
refill.

In addition, the runqueue cacheline that contains nr_running &
nr_uninterruptible may be evicted from the cache between the two passes.
This causes unnecessary cache misses.

Combining nr_running() & nr_interruptible() into a single function
substantially reduces the TLB & cache misses on large systems.  This should
have no measureable effect on smaller systems.

On a 128p IA64 system running a memory stress workload, the new function
reduced the overhead of calc_load() from 605 usec/call to 324 usec/call.

Signed-off-by: Jack Steiner <steiner@sgi.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-31 12:18:58 -08:00
Thomas Gleixner
00362e33f6 [PATCH] hrtimer: create generic sleeper
The removal of the data field in the hrtimer structure enforces the
embedding of the timer into another data structure.  nanosleep now uses a
private implementation of the most common used timer callback function
(simple task wakeup).

In order to avoid the reimplentation of such functionality all over the
place a generic hrtimer_sleeper functionality is created.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-31 12:18:58 -08:00
Richard Purdie
2bfb646cdf [PATCH] LED: Add IDE disk activity LED trigger
Add an LED trigger for IDE disk activity to the ide-disk driver.

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Acked-by: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-31 12:18:57 -08:00
Richard Purdie
c3bc9956ec [PATCH] LED: add LED trigger tupport
Add support for LED triggers to the LED subsystem.  "Triggers" are events
which change the state of an LED.  Two kinds of trigger are available, simple
ones which can be added to exising code with minimum disruption and complex
ones for implementing new or more complex functionality.

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-31 12:18:56 -08:00
Richard Purdie
c72a1d608d [PATCH] LED: add LED class
Add the foundations of a new LEDs subsystem.  This patch adds a class which
presents LED devices within sysfs and allows their brightness to be
controlled.

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-31 12:18:56 -08:00
Rafael J. Wysocki
0ca07731e4 [PATCH] vt: add TIOCL_GETKMSGREDIRECT
Add TIOCL_GETKMSGREDIRECT needed by the userland suspend tool to get the
current value of kmsg_redirect from the kernel so that it can save it and
restore it after resume.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Pavel Machek <pavel@suse.cz>
Cc: Michael Kerrisk <mtk-manpages@gmx.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-31 12:18:56 -08:00
Andrew Morton
f79e2abb9b [PATCH] sys_sync_file_range()
Remove the recently-added LINUX_FADV_ASYNC_WRITE and LINUX_FADV_WRITE_WAIT
fadvise() additions, do it in a new sys_sync_file_range() syscall instead.
Reasons:

- It's more flexible.  Things which would require two or three syscalls with
  fadvise() can be done in a single syscall.

- Using fadvise() in this manner is something not covered by POSIX.

The patch wires up the syscall for x86.

The sycall is implemented in the new fs/sync.c.  The intention is that we can
move sys_fsync(), sys_fdatasync() and perhaps sys_sync() into there later.

Documentation for the syscall is in fs/sync.c.

A test app (sync_file_range.c) is in
http://www.zip.com.au/~akpm/linux/patches/stuff/ext3-tools.tar.gz.

The available-to-GPL-modules do_sync_file_range() is for knfsd: "A COMMIT can
say NFS_DATA_SYNC or NFS_FILE_SYNC.  I can skip the ->fsync call for
NFS_DATA_SYNC which is hopefully the more common."

Note: the `async' writeout mode SYNC_FILE_RANGE_WRITE will turn synchronous if
the queue is congested.  This is trivial to fix: add a new flag bit, set
wbc->nonblocking.  But I'm not sure that we want to expose implementation
details down to that level.

Note: it's notable that we can sync an fd which wasn't opened for writing.
Same with fsync() and fdatasync()).

Note: the code takes some care to handle attempts to sync file contents
outside the 16TB offset on 32-bit machines.  It makes such attempts appear to
succeed, for best 32-bit/64-bit compatibility.  Perhaps it should make such
requests fail...

Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Michael Kerrisk <mtk-manpages@gmx.net>
Cc: Ulrich Drepper <drepper@redhat.com>
Cc: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-31 12:18:54 -08:00
Corey Minyard
453823ba08 [PATCH] IPMI: fix startup race condition
Matt Domsch noticed a startup race with the IPMI kernel thread, it was
possible (though extraordinarly unlikely) that a message could come in
before the upper layer was ready to handle it.  This patch splits the
startup processing of an IPMI interface into two parts, one to get ready
and one to actually start the processes to receive messages from the
interface.

[akpm@osdl.org: cleanups]
Signed-off-by: Corey Minyard <minyard@acm.org>
Cc: Matt Domsch <Matt_Domsch@dell.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-31 12:18:54 -08:00
Joe Korty
68eef3b479 [PATCH] Simplify proc/devices and fix early termination regression
Make baby-simple the code for /proc/devices.  Based on the proven design
for /proc/interrupts.

This also fixes the early-termination regression 2.6.16 introduced, as
demonstrated by:

    # dd if=/proc/devices bs=1
    Character devices:
      1 mem
    27+0 records in
    27+0 records out

This should also work (but is untested) when /proc/devices >4096 bytes,
which I believe is what the original 2.6.16 rewrite fixed.

[akpm@osdl.org: cleanups, simplifications]
Signed-off-by: Joe Korty <joe.korty@ccur.com>
Cc: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-31 12:18:53 -08:00
Oleg Nesterov
3691c5199e [PATCH] kill __init_timer_base in favor of boot_tvec_bases
Commit a4a6198b80:
	[PATCH] tvec_bases too large for per-cpu data

introduced "struct tvec_t_base_s boot_tvec_bases" which is visible at
compile time.  This means we can kill __init_timer_base and move
timer_base_s's content into tvec_t_base_s.

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-31 12:18:52 -08:00
Nick Piggin
93fac7041f [PATCH] mm: schedule find_trylock_page() removal
find_trylock_page() is an odd interface in that it doesn't take a reference
like the others.  Now that XFS no longer uses it, and its last remaining
caller actually wants an elevated refcount, opencode that callsite and
schedule find_trylock_page() for removal.

Signed-off-by: Nick Piggin <npiggin@suse.de>
Acked-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-31 12:18:49 -08:00
Christoph Lameter
9bf9e89c3d [PATCH] migrate_pages_to() must be defined for the no swap case
Fix migrate_pages_to() definition.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-31 12:18:49 -08:00
Adrian Bunk
0500abf521 [PATCH] drivers/mtd/: small cleanups
- chips/sharp.c: make two needlessly global functions static

- move some declarations to a header file where they belong to

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Acked-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-31 12:18:48 -08:00
Ingo Molnar
48b192686d [PATCH] sem2mutex: drivers/mtd/
Semaphore to mutex conversion.

The conversion was generated via scripts, and the result was validated
automatically via a script as well.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Acked-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-31 12:18:48 -08:00
Anton Blanchard
025be81e83 [NET]: Allow skb headroom to be overridden
Previously we added NET_IP_ALIGN so an architecture can override the
padding done to align headers. The next step is to allow the skb
headroom to be overridden.

We currently always reserve 16 bytes to grow into, meaning all DMAs
start 16 bytes into a cacheline. On ppc64 we really want DMA writes to
start on a cacheline boundary, so we increase that headroom to one
cacheline.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-31 02:27:06 -08:00
Linus Torvalds
256414dee4 Merge branch 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  [PATCH] sata_mv: three bug fixes
  [PATCH] libata: ata_dev_init_params() fixes
  [PATCH] libata: Fix interesting use of "extern" and also some bracketing
  [PATCH] libata: Simplex and other mode filtering logic
  [PATCH] libata - ATA is both ATA and CFA
  [PATCH] libata: Add ->set_mode hook for odd drivers
  [PATCH] libata: BMDMA handling updates
  [PATCH] libata: kill trailing whitespace
  [PATCH] libata: add FIXME above ata_dev_xfermask()
  [PATCH] libata: cosmetic changes in ata_bus_softreset()
  [PATCH] libata: kill E.D.D.
2006-03-30 14:29:20 -08:00
Jens Axboe
5abc97aa25 [PATCH] splice: add support for SPLICE_F_MOVE flag
This enables the caller to migrate pages from one address space page
cache to another.  In buzz word marketing, you can do zero-copy file
copies!

Signed-off-by: Jens Axboe <axboe@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-30 12:28:18 -08:00
Jens Axboe
5274f052e7 [PATCH] Introduce sys_splice() system call
This adds support for the sys_splice system call. Using a pipe as a
transport, it can connect to files or sockets (latter as output only).

From the splice.c comments:

   "splice": joining two ropes together by interweaving their strands.

   This is the "extended pipe" functionality, where a pipe is used as
   an arbitrary in-memory buffer. Think of a pipe as a small kernel
   buffer that you can use to transfer data from one end to the other.

   The traditional unix read/write is extended with a "splice()" operation
   that transfers data buffers to or from a pipe buffer.

   Named by Larry McVoy, original implementation from Linus, extended by
   Jens to support splicing to files and fixing the initial implementation
   bugs.

Signed-off-by: Jens Axboe <axboe@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-30 12:28:18 -08:00
Jeff Garzik
4f0e7c51ae Merge branch 'upstream'
Conflicts:

	drivers/scsi/sata_mv.c
2006-03-29 19:59:39 -05:00
Jeff Garzik
79072f3890 Merge branch 'upstream' 2006-03-29 19:58:22 -05:00
Alan Cox
5444a6f405 [PATCH] libata: Simplex and other mode filtering logic
Add a field to the host_set called 'flags' (was host_set_flags changed
to suit Jeff)
Add a simplex_claimed field so we can remember who owns the DMA channel
Add a ->mode_filter() hook to allow drivers to filter modes
Add docs for mode_filter and set_mode
Filter according to simplex state
Filter cable in core

This provides the needed framework to support all the mode rules found
in the PATA world. The simplex filter deals with 'to spec' simplex DMA
systems found in older chips. The cable filter avoids duplicating the
same rules in each chip driver with PATA. Finally the mode filter is
neccessary because drive/chip combinations have errata that forbid
certain modes with some drives or types of ATA object.

Drive speed setup remains per channel for now and the filters now use
the framework Tejun put into place which cleans them up a lot from the
older libata-pata patches.

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-29 19:30:28 -05:00
Alan Cox
e35a9e01f2 [PATCH] libata: Add ->set_mode hook for odd drivers
Some hardware doesn't want the usual mode setup logic running. This
allows the hardware driver to replace it for special cases in the least
invasive way possible.

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-29 19:30:27 -05:00