As the code in this file is being executed within irq context in some
cases, we must avoid the clk_get_rate which uses mutex internally.
Switch the code to use clk_hw_get_rate instead which is non-locking.
This fixes an issue where PM runtime will hang the system if enabled
with a serial console before a suspend-resume cycle.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Tested-by: Tony Lindgren <tony@atomide.com>
Fixes: a53ad8ef3d ("clk: ti: Convert to clk_hw based provider APIs")
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
- Two scsiback fixes (resource leak and spurious warning).
- Fix DMA mapping of compound pages on arm/arm64.
- Fix some pciback regressions in MSI-X handling.
- Fix a pcifront crash due to some uninitialize state.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJWyvatAAoJEFxbo/MsZsTRBFcH+wWnv0/N+gKib3cKCI4lwmTg
n8iVgf8dNWwD36M2s/OlzCAglAIt8Xr6ySNvPqTerpm7lT9yXlIVQxGXTbIGuTAA
h8Kt8WiC0BNLHHlLxBuCz62KR47DvMhsr84lFURE8FmpUiulFjXmRcbrZkHIMYRS
l/X+xJWO1vxwrSYho0P9n3ksTWHm488DTPvZz3ICNI2G2sndDfbT3gv3tMDaQhcX
ZaQR93vtIoldqk29Ga59vaVtksbgxHZIbasY9PQ8rqOxHJpDQbPzpjocoLxAzf50
cioQVyKQ7i9vUvZ+B3TTAOhxisA2hDwNhLGQzmjgxe2TXeKdo3yjYwO6m1dDBzY=
=VY/S
-----END PGP SIGNATURE-----
Merge tag 'for-linus-4.5-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen bug fixes from David Vrabel:
- Two scsiback fixes (resource leak and spurious warning).
- Fix DMA mapping of compound pages on arm/arm64.
- Fix some pciback regressions in MSI-X handling.
- Fix a pcifront crash due to some uninitialize state.
* tag 'for-linus-4.5-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/pcifront: Fix mysterious crashes when NUMA locality information was extracted.
xen/pcifront: Report the errors better.
xen/pciback: Save the number of MSI-X entries to be copied later.
xen/pciback: Check PF instead of VF for PCI_COMMAND_MEMORY
xen: fix potential integer overflow in queue_reply
xen/arm: correctly handle DMA mapping of compound pages
xen/scsiback: avoid warnings when adding multiple LUNs to a domain
xen/scsiback: correct frontend counting
Pull networking fixes from David Miller:
"Looks like a lot, but mostly driver fixes scattered all over as usual.
Of note:
1) Add conditional sched in nf conntrack in cleanup to avoid NMI
watchdogs. From Florian Westphal.
2) Fix deadlock in nfnetlink cttimeout, also from Floarian.
3) Fix handling of slaves in bonding ARP monitor validation, from Jay
Vosburgh.
4) Callers of ip_cmsg_send() are responsible for freeing IP options,
some were not doing so. Fix from Eric Dumazet.
5) Fix per-cpu bugs in mvneta driver, from Gregory CLEMENT.
6) Fix vlan handling in mv88e6xxx DSA driver, from Vivien Didelot.
7) bcm7xxx PHY driver bug fixes from Florian Fainelli.
8) Avoid unaligned accesses to protocol headers wrt. GRE, from
Alexander Duyck.
9) SKB leaks and other problems in arc_emac driver, from Alexander
Kochetkov.
10) tcp_v4_inbound_md5_hash() releases listener socket instead of
request socket on error path, oops. Fix from Eric Dumazet.
11) Missing socket release in pppoe_rcv_core() that seems to have
existed basically forever. From Guillaume Nault.
12) Missing slave_dev unregister in dsa_slave_create() error path,
from Florian Fainelli.
13) crypto_alloc_hash() never returns NULL, fix return value check in
__tcp_alloc_md5sig_pool. From Insu Yun.
14) Properly expire exception route entries in ipv4, from Xin Long.
15) Fix races in tcp/dccp listener socket dismantle, from Eric
Dumazet.
16) Don't set IFF_TX_SKB_SHARING in vxlan, geneve, or GRE, it's not
legal. These drivers modify the SKB on transmit. From Jiri Benc.
17) Fix regression in the initialziation of netdev->tx_queue_len.
From Phil Sutter.
18) Missing unlock in tipc_nl_add_bc_link() error path, from Insu Yun.
19) SCTP port hash sizing does not properly ensure that table is a
power of two in size. From Neil Horman.
20) Fix initializing of software copy of MAC address in fmvj18x_cs
driver, from Ken Kawasaki"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (129 commits)
bnx2x: Fix 84833 phy command handler
bnx2x: Fix led setting for 84858 phy.
bnx2x: Correct 84858 PHY fw version
bnx2x: Fix 84833 RX CRC
bnx2x: Fix link-forcing for KR2
net: ethernet: davicom: fix devicetree irq resource
fmvj18x_cs: fix incorrect indexing of dev->dev_addr[] when copying the MAC address
Driver: Vmxnet3: Update Rx ring 2 max size
net: netcp: rework the code for get/set sw_data in dma desc
soc: ti: knav_dma: rename pad in struct knav_dma_desc to sw_data
net: ti: netcp: restore get/set_pad_info() functionality
MAINTAINERS: Drop myself as xen netback maintainer
sctp: Fix port hash table size computation
can: ems_usb: Fix possible tx overflow
Bluetooth: hci_core: Avoid mixing up req_complete and req_complete_skb
net: bcmgenet: Fix internal PHY link state
af_unix: Don't use continue to re-execute unix_stream_read_generic loop
unix_diag: fix incorrect sign extension in unix_lookup_by_ino
bnxt_en: Failure to update PHY is not fatal condition.
bnxt_en: Remove unnecessary call to update PHY settings.
...
Remove an un-necessary speed_index lookup for thermal hook in the gpio-fan
driver. The unnecessary speed lookup can hog the system.
Handle negative conversion values correctly in the ads1015 driver.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=luAI
-----END PGP SIGNATURE-----
Merge tag 'hwmon-for-linus-v4.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
"Two fixes headed for stable:
- Remove an unnecessary speed_index lookup for thermal hook in the
gpio-fan driver. The unnecessary speed lookup can hog the system.
- Handle negative conversion values correctly in the ads1015 driver"
* tag 'hwmon-for-linus-v4.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (gpio-fan) Remove un-necessary speed_index lookup for thermal hook
hwmon: (ads1015) Handle negative conversion values correctly
- One fix ocrdma - The new CQ API support was added to ocrdma, but they
got the arming logic wrong, so without this, transfers eventually fail
when they fail to arm the interrupt properly under load
- Two related fixes for mlx4 - When we added the 64bit extended counters
support to the core IB code, they forgot to update the RoCE side of the
mlx4 driver (the IB side they properly updated). I debated whether or
not to include these patches as they could be considered feature
enablement patches, but the existing code will blindy copy the 32bit
counters, whether any counters were requested at all (a bug). These
two patches make it A) check to see that counters were requested and
B) copy the right counters (the 64bit support is new, the 32bit is
not). For that reason I went ahead and took them.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=QD36
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma
Pull rdma fixes from Doug Ledford:
"One ocrdma fix:
- The new CQ API support was added to ocrdma, but they got the arming
logic wrong, so without this, transfers eventually fail when they
fail to arm the interrupt properly under load
Two related fixes for mlx4:
- When we added the 64bit extended counters support to the core IB
code, they forgot to update the RoCE side of the mlx4 driver (the
IB side they properly updated).
I debated whether or not to include these patches as they could be
considered feature enablement patches, but the existing code will
blindy copy the 32bit counters, whether any counters were requested
at all (a bug).
These two patches make it (a) check to see that counters were
requested and (b) copy the right counters (the 64bit support is
new, the 32bit is not). For that reason I went ahead and took
them"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma:
IB/mlx4: Add support for the port info class for RoCE ports
IB/mlx4: Add support for extended counters over RoCE ports
RDMA/ocrdma: Fix arm logic to align with new cq API
Pull i2c fixes from Wolfram Sang:
"Some bugfixes from I2C for you:
A fix for a RuntimePM regression with OMAP, a fix to enable TCO for
Lewisburg platforms, and a typo fix while we are here"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: i801: Adding Intel Lewisburg support for iTCO
i2c: uniphier: fix typos in error messages
i2c: omap: Fix PM regression with deferred probe for pm_runtime_reinit
- EOI handling for LPIs when GICv3 is in EOImode==1
- Another fallout from changing page size while allocating ITS tables
- Missing memory barrier in the 32bit GICv3 code
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=ZtCQ
-----END PGP SIGNATURE-----
Merge tag 'gic-fixes-4.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent
Pull GIC fixes for 4.5-rc5 from Marc Zyngier:
- EOI handling for LPIs when GICv3 is in EOImode==1
- Another fallout from changing page size while allocating ITS tables
- Missing memory barrier in the 32bit GICv3 code
It has been observed that sometimes disabling the dc6 fails
and dc6 state pops back up, brief moment after disabling. This
has to be dmc save/restore timing issue or other bug in the
way dc states are handled.
Try to work around this issue as we don't have firmware fix
yet available. Verify that the value we wrote for the dmc sticks,
and also enforce it by rewriting it, if it didn't.
v2: Zero rereads on rewrite for extra paranoia (Imre)
Testcase: kms_flip/basic-flip-vs-dpms
References: https://bugs.freedesktop.org/show_bug.cgi?id=93768
Cc: Patrik Jakobsson <patrik.jakobsson@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1455811089-27884-1-git-send-email-mika.kuoppala@intel.com
(cherry picked from commit 779cb5d3dd)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The DMC can incorrectly run off and allow DC states on it's own. We
don't know the root-cause for this yet but this patch makes it more
visible.
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Patrik Jakobsson <patrik.jakobsson@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1455808874-22089-2-git-send-email-mika.kuoppala@intel.com
(cherry picked from commit 832dba889e)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
set_power_state defaults to no displays, so we need to update
the display configuration after setting up the powerstate on the
first call. In most cases this is not an issue since ends up
getting called multiple times at any given modeset and the proper
order is achieved in the display changed handling at the top of
the function.
Reviewed-by: Christian König <christian.koenig@amd.com>
Acked-by: Jordan Lazare <Jordan.Lazare@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
set_power_state defaults to no displays, so we need to update
the display configuration after setting up the powerstate on the
first call. In most cases this is not an issue since ends up
getting called multiple times at any given modeset and the proper
order is achieved in the display changed handling at the top of
the function.
Reviewed-by: Christian König <christian.koenig@amd.com>
Acked-by: Jordan Lazare <Jordan.Lazare@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
I.e., doesn't make sense to change power states or check the
temperature when the asic is powered off.
Reviewed-by: Christian König <christian.koenig@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Looks like a copy paste typo when we added powerplay
support.
Reviewed-by: Christian König <christian.koenig@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Looks like a copy/paste typo.
Reviewed-by: Christian König <christian.koenig@amd.com>
Noticed-by: David Panariti <David.Panariti@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Some Skylake machines show the codec probe errors in certain
situations, e.g. HP Z240 desktop fails to probe the onboard Realtek
codec at reloading the snd-hda-intel module like:
snd_hda_intel 0000:00:1f.3: spurious response 0x200:0x2, last cmd=0x000000
snd_hda_intel 0000:00:1f.3: azx_get_response timeout, switching to polling mode: lastcmd=0x000f0000
snd_hda_intel 0000:00:1f.3: No response from codec, disabling MSI: last cmd=0x000f0000
snd_hda_intel 0000:00:1f.3: Codec #0 probe error; disabling it...
hdaudio hdaudioC0D2: no AFG or MFG node found
snd_hda_intel 0000:00:1f.3: no codecs initialized
Also, HP G470 G3 suffers from the similar problem, as reported in
bugzilla below. On this machine, the codec probe error appears even
at a fresh boot.
As Libin suggested, the same workaround used for Broxton in the commit
[6639484dda: ALSA: hda - disable dynamic clock gating on Broxton
before reset] can be applied for Skylake in order to fix this problem.
The Intel HW team also confirmed that this is needed for SKL.
This patch makes the workaround applied to both SKL and BXT
platforms. The referred macros are moved and one superfluous macro
(IS_BROXTON()) is another one (IS_BXT()) as well.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=112731
Suggested-by: Libin Yang <libin.yang@linux.intel.com>
Cc: <stable@vger.kernel.org> # v4.4+
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Users can pass options to tracepoints defined in the BPF script. For
example:
# perf record -e ./test.c/no-inherit/ bash
# dd if=/dev/zero of=/dev/null count=10000
# exit
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.022 MB perf.data (139 samples) ]
(no-inherit works, only the sys_read issued by bash are captured, at
least 10000 sys_read issued by dd are skipped.)
test.c:
#define SEC(NAME) __attribute__((section(NAME), used))
SEC("func=sys_read")
int bpf_func__sys_read(void *ctx)
{
return 1;
}
char _license[] SEC("license") = "GPL";
int _version SEC("version") = LINUX_VERSION_CODE;
no-inherit is applied to the kprobe event defined in test.c.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Cody P Schafer <dev@codyps.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jeremie Galarneau <jeremie.galarneau@efficios.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kirill Smelkov <kirr@nexedi.com>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1456132275-98875-10-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch introduces basic facilities to support config different slots
in a BPF map one by one.
array.nr_ranges and array.ranges are introduced into 'struct
parse_events_term', where ranges is an array of indices range (start,
length) which will be configured by this config term. nr_ranges is the
size of the array. The array is passed to 'struct bpf_map_priv'. To
indicate the new type of configuration, BPF_MAP_KEY_RANGES is added as a
new key type. bpf_map_config_foreach_key() is extended to iterate over
those indices instead of all possible keys.
Code in this commit will be enabled by following commit which enables
the indices syntax for array configuration.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Cody P Schafer <dev@codyps.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jeremie Galarneau <jeremie.galarneau@efficios.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kirill Smelkov <kirr@nexedi.com>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1456132275-98875-8-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The assumption when adding the intel_display_power_is_enabled() checks
was that if it returns success the power can't be turned off afterwards
during the HW access, which is guaranteed by modeset locks. This isn't
always true, so make sure we hold a dedicated reference for the time of
the access.
Spotted-by: Mika Kuoppala <mika.kuoppala@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=93441
CC: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1455719489-3008-1-git-send-email-imre.deak@intel.com
(cherry picked from commit 4d80003023)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The assumption when adding the intel_display_power_is_enabled() checks
was that if it returns success the power can't be turned off afterwards
during the HW access, which is guaranteed by modeset locks. This isn't
always true, so make sure we hold a dedicated reference for the time of
the access.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1455296121-4742-13-git-send-email-imre.deak@intel.com
(cherry picked from commit ecb2448218)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The assumption when adding the intel_display_power_is_enabled() checks
was that if it returns success the power can't be turned off afterwards
during the HW access, which is guaranteed by modeset locks. This isn't
always true, so make sure we hold a dedicated reference for the time of
the access.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1455296121-4742-12-git-send-email-imre.deak@intel.com
(cherry picked from commit 5b0921748c)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The assumption when adding the intel_display_power_is_enabled() checks
was that if it returns success the power can't be turned off afterwards
during the HW access, which is guaranteed by modeset locks. This isn't
always true, so make sure we hold a dedicated reference for the time of
the access.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1455296121-4742-11-git-send-email-imre.deak@intel.com
(cherry picked from commit 3f3f42b887)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The assumption when adding the intel_display_power_is_enabled() checks
was that if it returns success the power can't be turned off afterwards
during the HW access, which is guaranteed by modeset locks. This isn't
always true, so make sure we hold a dedicated reference for the time of
the access.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1455296121-4742-10-git-send-email-imre.deak@intel.com
(cherry picked from commit 6fa9a5ecf7)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The assumption when adding the intel_display_power_is_enabled() checks
was that if it returns success the power can't be turned off afterwards
during the HW access, which is guaranteed by modeset locks. This isn't
always true, so make sure we hold a dedicated reference for the time of
the access.
While at it also add the missing reference around the HW access in
i915_interrupt_info().
v2:
- update the commit message mentioning that this also fixes the
HW access in the interrupt info debugfs entry (Daniel)
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1455296121-4742-9-git-send-email-imre.deak@intel.com
(cherry picked from commit e129649b7a)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The assumption when adding the intel_display_power_is_enabled() checks
was that if it returns success the power can't be turned off afterwards
during the HW access, which is guaranteed by modeset locks. This isn't
always true, so make sure we hold a dedicated reference for the time of
the access.
CC: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1455296121-4742-8-git-send-email-imre.deak@intel.com
(cherry picked from commit e27daab497)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The assumption when adding the intel_display_power_is_enabled() checks
was that if it returns success the power can't be turned off afterwards
during the HW access, which is guaranteed by modeset locks. This isn't
always true, so make sure we hold a dedicated reference for the time of
the access.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=93439
CC: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1455296121-4742-7-git-send-email-imre.deak@intel.com
(cherry picked from commit 1c8fdda1ea)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The assumption when adding the intel_display_power_is_enabled() checks
was that if it returns success the power can't be turned off afterwards
during the HW access, which is guaranteed by modeset locks. This isn't
always true, so make sure we hold a dedicated reference for the time of
the access.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1455296121-4742-6-git-send-email-imre.deak@intel.com
(cherry picked from commit 4feed0ebfa)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The assumption when adding the intel_display_power_is_enabled() checks
was that if it returns success the power can't be turned off afterwards
during the HW access, which is guaranteed by modeset locks. This isn't
always true, so make sure we hold a dedicated reference for the time of
the access.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1455296121-4742-5-git-send-email-imre.deak@intel.com
(cherry picked from commit 6392f8478e)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The assumption when adding the intel_display_power_is_enabled() checks
was that if it returns success the power can't be turned off afterwards
during the HW access, which is guaranteed by modeset locks. This isn't
always true, so make sure we hold a dedicated reference for the time of
the access.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1455296121-4742-4-git-send-email-imre.deak@intel.com
(cherry picked from commit 12fda3876d)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The assumption when adding the intel_display_power_is_enabled() checks
was that if it returns success the power can't be turned off afterwards
during the HW access, which is guaranteed by modeset locks. This isn't
always true, so make sure we hold a dedicated reference for the time of
the access.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Revieved-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1455296121-4742-3-git-send-email-imre.deak@intel.com
(cherry picked from commit 1729050eb4)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
We have many places in the code where we check if a given display power
domain is enabled and if so access registers backed by this power
domain. We assumed that some modeset lock will prevent the power
reference from vanishing in the middle of the HW access, but this
assumption doesn't always hold. In such cases we get either the wakeref
not held, or an unclaimed register access error message. To fix this in
a future-proof way that's independent of other locks wrap any such
access with a get_ref_if_enabled()/put_ref() pair.
Kudos to Ville and Joonas for the ideas of this new interface.
v2:
- init the power_domains ptr when declaring it everywhere (Joonas)
v3:
- don't report the device to be powered if runtime PM is disabled
CC: Mika Kuoppala <mika.kuoppala@intel.com>
CC: Chris Wilson <chris@chris-wilson.co.uk>
CC: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
CC: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1455711462-7442-1-git-send-email-imre.deak@intel.com
(cherry picked from commit 0973128002)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
bpf__apply_obj_config() is introduced as the core API to apply object
config options to all BPF objects. This patch also does the real work
for setting values for BPF_MAP_TYPE_PERF_ARRAY maps by inserting value
stored in map's private field into the BPF map.
This patch is required because we are not always able to set all BPF
config during parsing. Further patch will set events created by perf to
BPF_MAP_TYPE_PERF_EVENT_ARRAY maps, which is not exist until
perf_evsel__open().
bpf_map_foreach_key() is introduced to iterate over each key needs to be
configured. This function would be extended to support more map types
and different key settings.
In perf record, before start recording, call bpf__apply_config() to turn
on all BPF config options.
Test result:
# cat ./test_bpf_map_1.c
/************************ BEGIN **************************/
#include <uapi/linux/bpf.h>
#define SEC(NAME) __attribute__((section(NAME), used))
struct bpf_map_def {
unsigned int type;
unsigned int key_size;
unsigned int value_size;
unsigned int max_entries;
};
static void *(*map_lookup_elem)(struct bpf_map_def *, void *) =
(void *)BPF_FUNC_map_lookup_elem;
static int (*trace_printk)(const char *fmt, int fmt_size, ...) =
(void *)BPF_FUNC_trace_printk;
struct bpf_map_def SEC("maps") channel = {
.type = BPF_MAP_TYPE_ARRAY,
.key_size = sizeof(int),
.value_size = sizeof(int),
.max_entries = 1,
};
SEC("func=sys_nanosleep")
int func(void *ctx)
{
int key = 0;
char fmt[] = "%d\n";
int *pval = map_lookup_elem(&channel, &key);
if (!pval)
return 0;
trace_printk(fmt, sizeof(fmt), *pval);
return 0;
}
char _license[] SEC("license") = "GPL";
int _version SEC("version") = LINUX_VERSION_CODE;
/************************* END ***************************/
# echo "" > /sys/kernel/debug/tracing/trace
# ./perf record -e './test_bpf_map_1.c/map:channel.value=11/' usleep 10
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.012 MB perf.data ]
# cat /sys/kernel/debug/tracing/trace
# tracer: nop
#
# entries-in-buffer/entries-written: 1/1 #P:8
[SNIP]
# TASK-PID CPU# |||| TIMESTAMP FUNCTION
# | | | |||| | |
usleep-18593 [007] d... 2394714.395539: : 11
# ./perf record -e './test_bpf_map_1.c/map:channel.value=101/' usleep 10
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.012 MB perf.data ]
# cat /sys/kernel/debug/tracing/trace
# tracer: nop
#
# entries-in-buffer/entries-written: 1/1 #P:8
[SNIP]
# TASK-PID CPU# |||| TIMESTAMP FUNCTION
# | | | |||| | |
usleep-18593 [007] d... 2394714.395539: : 11
usleep-19000 [006] d... 2394831.057840: : 101
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Cody P Schafer <dev@codyps.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jeremie Galarneau <jeremie.galarneau@efficios.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kirill Smelkov <kirr@nexedi.com>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1456132275-98875-6-git-send-email-wangnan0@huawei.com
Signed-off-by: He Kuang <hekuang@huawei.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch adds the final step for BPF map configuration. A new syntax
is appended into parser so user can config BPF objects through '/' '/'
enclosed config terms.
After this patch, following syntax is available:
# perf record -e ./test_bpf_map_1.c/map:channel.value=10/ ...
It would takes effect after appling following commits.
Test result:
# cat ./test_bpf_map_1.c
/************************ BEGIN **************************/
#include <uapi/linux/bpf.h>
#define SEC(NAME) __attribute__((section(NAME), used))
struct bpf_map_def {
unsigned int type;
unsigned int key_size;
unsigned int value_size;
unsigned int max_entries;
};
static void *(*map_lookup_elem)(struct bpf_map_def *, void *) =
(void *)BPF_FUNC_map_lookup_elem;
static int (*trace_printk)(const char *fmt, int fmt_size, ...) =
(void *)BPF_FUNC_trace_printk;
struct bpf_map_def SEC("maps") channel = {
.type = BPF_MAP_TYPE_ARRAY,
.key_size = sizeof(int),
.value_size = sizeof(int),
.max_entries = 1,
};
SEC("func=sys_nanosleep")
int func(void *ctx)
{
int key = 0;
char fmt[] = "%d\n";
int *pval = map_lookup_elem(&channel, &key);
if (!pval)
return 0;
trace_printk(fmt, sizeof(fmt), *pval);
return 0;
}
char _license[] SEC("license") = "GPL";
int _version SEC("version") = LINUX_VERSION_CODE;
/************************* END ***************************/
- Normal case:
# ./perf record -e './test_bpf_map_1.c/map:channel.value=10/' usleep 10
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.012 MB perf.data ]
- Error case:
# ./perf record -e './test_bpf_map_1.c/map:channel.value/' usleep 10
event syntax error: '..ps:channel:value/'
\___ Config value not set (missing '=')
Hint: Valid config term:
map:[<arraymap>]:value=[value]
(add -v to see detail)
Run 'perf list' for a list of valid events
Usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
-e, --event <event> event selector. use 'perf list' to list available events
# ./perf record -e './test_bpf_map_1.c/xmap:channel.value=10/' usleep 10
event syntax error: '..pf_map_1.c/xmap:channel.value=10/'
\___ Invalid object config option
[SNIP]
# ./perf record -e './test_bpf_map_1.c/map:xchannel.value=10/' usleep 10
event syntax error: '..p_1.c/map:xchannel.value=10/'
\___ Target map not exist
[SNIP]
# ./perf record -e './test_bpf_map_1.c/map:channel.xvalue=10/' usleep 10
event syntax error: '..ps:channel.xvalue=10/'
\___ Invalid object map config option
[SNIP]
# ./perf record -e './test_bpf_map_1.c/map:channel.value=x10/' usleep 10
event syntax error: '..nnel.value=x10/'
\___ Incorrect value type for map
[SNIP]
Change BPF_MAP_TYPE_ARRAY to '1' in test_bpf_map_1.c:
# ./perf record -e './test_bpf_map_1.c/map:channel.value=10/' usleep 10
event syntax error: '..ps:channel.value=10/'
\___ Can't use this config term to this type of map
Hint: Valid config term:
map:[<arraymap>].value=[value]
(add -v to see detail)
Signed-off-by: Wang Nan <wangnan0@huawei.com>
[for parser part]
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Cody P Schafer <dev@codyps.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jeremie Galarneau <jeremie.galarneau@efficios.com>
Cc: Kirill Smelkov <kirr@nexedi.com>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1456132275-98875-5-git-send-email-wangnan0@huawei.com
Signed-off-by: He Kuang <hekuang@huawei.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
bpf__config_obj() is introduced as a core API to config BPF object after
loading. One configuration option of maps is introduced. After this
patch BPF object can accept assignments like:
map:my_map.value=1234
(map.my_map.value looks pretty. However, there's a small but hard to fix
problem related to flex's greedy matching. Please see [1]. Choose ':'
to avoid it in a simpler way.)
This patch is more complex than the work it does because the
consideration of extension. In designing BPF map configuration, the
following things should be considered:
1. Array indices selection: perf should allow user setting different
value for different slots in an array, with syntax like:
map:my_map.value[0,3...6]=1234;
2. A map should be set by different config terms, each for a part
of it. For example, set each slot to the pid of a thread;
3. Type of value: integer is not the only valid value type. A perf
counter can also be put into a map after commit 35578d7984
("bpf: Implement function bpf_perf_event_read() that get the
selected hardware PMU counter")
4. For a hash table, it should be possible to use a string or other
value as a key;
5. It is possible that map configuration is unable to be setup
during parsing. A perf counter is an example.
Therefore, this patch does the following:
1. Instead of updating map element during parsing, this patch stores
map config options in 'struct bpf_map_priv'. Following patches
will apply those configs at an appropriate time;
2. Link map operations in a list so a map can have multiple config
terms attached, so different parts can be configured separately;
3. Make 'struct bpf_map_priv' extensible so that the following patches
can add new types of keys and operations;
4. Use bpf_obj_config__map_funcs array to support more map config options.
Since the patch changing the event parser to parse BPF object config is
relative large, I've put it in another commit. Code in this patch can be
tested after applying the next patch.
[1] http://lkml.kernel.org/g/564ED621.4050500@huawei.com
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Cody P Schafer <dev@codyps.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jeremie Galarneau <jeremie.galarneau@efficios.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kirill Smelkov <kirr@nexedi.com>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1456132275-98875-4-git-send-email-wangnan0@huawei.com
Signed-off-by: He Kuang <hekuang@huawei.com>
[ Changes "maps:my_map.value" to "map:my_map.value", improved error messages ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The dynamic entry is created for each field in a tracepoint event.
Since they have no fixed hpp format index, it should skip when
perf_hpp__reset_width() is called.
This caused following assertion failure..
$ perf record -e sched:sched_switch -a sleep 1
$ perf report -s comm,next_pid --stdio
perf: ui/hist.c:651: perf_hpp__reset_width:
Assertion `!(fmt->idx >= PERF_HPP__MAX_INDEX)' failed.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1456064558-13086-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It missed to update column length of the 'trace' sort key in the
hists__calc_col_len() so it might truncate the output. It calculated
the column length in the ->cmp() callback originally but it doesn't
guarantee it's called always.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1456064558-13086-5-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The srcline, srcfile and trace sort keys can have long entries. With
commit 89fee70943 ("perf hists: Do column alignment on the format
iterator"), it now aligns output with hist_entry__snprintf_alignment().
So each (possibly long) sort entries don't need to do it themselves.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1456101153-14519-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Normally the hist entry's srcline and/or srcfile is set during sorting.
However sometime it's possible to a hist entry's srcline is not set yet
after the sorting. This is because the entry is so unique and other
sort keys already make it distinct. Then the srcline/file sort didn't
have a chance to be called during the sorting. In that case it has NULL
srcline/srcfile field and shows nothing.
Before:
$ perf report -s comm,sym,srcline
...
Overhead Command Symbol
-----------------------------------------------------------------
34.42% swapper [k] intel_idle intel_idle.c:0
2.44% perf [.] __poll_nocancel (null)
1.70% gnome-shell [k] fw_domains_get (null)
1.04% Xorg [k] sock_poll (null)
After:
34.42% swapper [k] intel_idle intel_idle.c:0
2.44% perf [.] __poll_nocancel .:0
1.70% gnome-shell [k] fw_domains_get fw_domains_get+42
1.04% Xorg [k] sock_poll socket.c:0
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1456101111-14400-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
A dynamic entry is created for each tracepoint event. When it sets up
the sort key, it checks with existing keys using ->equal() callback.
But it missed to set the ->equal for dynamic entries. The following
segfault was due to the missing ->equal() callback.
(gdb) bt
#0 0x0000000000140003 in ?? ()
#1 0x0000000000537769 in fmt_equal (b=0x2106980, a=0x21067a0) at ui/hist.c:548
#2 perf_hpp__setup_output_field (list=0x8c6d80 <perf_hpp_list>) at ui/hist.c:560
#3 0x00000000004e927e in setup_sorting (evlist=<optimized out>) at util/sort.c:2642
#4 0x000000000043cf50 in cmd_report (argc=<optimized out>, argv=<optimized out>, prefix=<optimized out>)
at builtin-report.c:932
#5 0x00000000004865a1 in run_builtin (p=p@entry=0x8bbce0 <commands+192>, argc=argc@entry=7,
argv=argv@entry=0x7ffd24d56ce0) at perf.c:390
#6 0x000000000042dc1f in handle_internal_command (argv=0x7ffd24d56ce0, argc=7) at perf.c:451
#7 run_argv (argv=0x7ffd24d56a70, argcp=0x7ffd24d56a7c) at perf.c:495
#8 main (argc=7, argv=0x7ffd24d56ce0) at perf.c:620
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1456064558-13086-2-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Older compilers don't like this, for instance, on RHEL6.7:
CC /tmp/build/perf/util/parse-events.o
util/parse-events.c:844: error: redefinition of typedef ‘config_term_func_t’
util/parse-events.c:353: note: previous declaration of ‘config_term_func_t’ was here
So remove the second definition, that should've been just moved in 43d0b97817
("perf tools: Enable config and setting names for legacy cache events"), not copied.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: 43d0b97817 ("perf tools: Enable config and setting names for legacy cache events")
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In RHEL 6.7:
CC /tmp/build/perf/util/parse-events.o
cc1: warnings being treated as errors
util/parse-events.c: In function ‘parse_events_add_cache’:
util/parse-events.c:366: error: declaration of ‘error’ shadows a global declaration
util/util.h:136: error: shadowed declaration is here
Rename it to 'err'.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: 43d0b97817 ("perf tools: Enable config and setting names for legacy cache events")
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
git commit 904818e2f2
"s390/kernel: introduce fpu-internal.h with fpu helper functions"
introduced the fpregs_store / fp_regs_load helper. These function
fail to save and restore the floating pointer control registers.
The effect is that the FPC is not correctly handled on signal
delivery and signal return.
Cc: stable@vger.kernel.org # 4.4
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
git commit 8070361799
"s390: add support for vector extension"
broke 31-bit compat processes in regard to signal handling.
The restore_sigregs_ext32() function is used to restore the additional
elements from the user space signal frame. Among the additional elements
are the upper registers halves for 64-bit register support for 31-bit
processes. The copy_from_user that is used to retrieve the high-gprs
array from the user stack uses an incorrect length, 8 bytes instead of
64 bytes. This causes incorrect upper register halves to get loaded.
Cc: stable@vger.kernel.org # 3.8+
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
We can get a hash pte fault with 4k base page size and find the pte
already inserted with 64K base page size. In that case we need to clear
the existing slot information from the old pte. Fix this correctly
With THP, we also clear the slot information with respect to all
the 64K hash pte mapping that 16MB page. They are all invalid
now. This make sure we don't find the slot valid when we fault with
4k base page size. Finding the slot valid should not result in any wrong
behavior because we do check again in hash page table for the validity.
But we can avoid that check completely.
Fixes: a43c0eb836 ("powerpc/mm: Convert 4k hash insert to C")
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
During error recovery, the device could be removed as part of the
partial hotplug. The criterion used to come with partial hotplug
is: if the device driver provides error_detected(), slot_reset()
and resume() callbacks, it's immune from hotplug. Otherwise,
it's going to experience partial hotplug during EEH recovery. But
the criterion isn't correct enough: mlx4_core driver for Mellanox
adapters provides error_detected(), slot_reset() callbacks, but
resume() isn't there. Those Mellanox adapters won't be to involved
in the partial hotplug.
This fixes the criterion to a practical one: adpater with driver
that provides error_detected(), slot_reset() will be immune from
partial hotplug. resume() isn't mandatory.
Fixes: f2da4ccf ("powerpc/eeh: More relaxed hotplug criterion")
Cc: stable@vger.kernel.org #v4.4+
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
-----BEGIN PGP SIGNATURE-----
iQEcBAABCgAGBQJWycVaAAoJED07qiWsqSVqhoIIAKNVMLApOlvduZ2JQYSUJ+tC
IWjRSuB3sOwCIMKx4DXWhovkTU6j00jxQiEHF5phSOA9n5n+wwJMhgZQeOehAYoS
smwkKMjJhgvEd4lZ7+OBWj6Xi1mStU3ddYYubE7MkTE/4E6vsnJ6/iVbCyIv4d0F
7zGnWaq/bca+ccZyrVO9hk3mg8ZD+2L6hGR47E5vWerR4mupifMK0LvmfgIPBsMk
FVMKhddDek2xUTZxdUesXCvAoOewSfhFbNG3uMH6AFKVjEhFoEC8c0Wn7zLrJ5Zn
FCec9e4qXRHwQo1MgobLn6SXgrwEoPqXUFTQfNVG8rYkX/vXScXX9V7JZCCuC8U=
=0Qdk
-----END PGP SIGNATURE-----
Merge tag 'linux-can-fixes-for-4.5-20160221' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2016-02-21
this is a pull reqeust of one patch for net/master.
The patch is by Gerhard Uttenthaler and fixes a potential tx overflow in the
ems_usb driver.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Yuval Mintz says:
====================
bnx2x: Fix 848xx phys
This series contains link-related fixes, mostly for the 848xx phys
[2 patches are for 84833, and 2 patches are for 84858].
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
