It is necessary to clear MC13892_SWITCHERS0_SWxHI bit when set voltage to the
voltage range from 1100000 to 1375000. Leaving MC13892_SWITCHERS0_SWxHI bit
untouched may result in wrong voltage setting.
For example, currently switch voltage from 1400000 to 1300000 will set the
voltage to 1800000 because the HI bit is still set.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@sirena.org.uk>
It's safe to call regulator_unregister() with NULL, thus remove the NULL test
before regulator_unregister() calls.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@sirena.org.uk>
Patch adds device tree probe support for mc13783-regulator driver.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Mark Brown <broonie@sirena.org.uk>
This patch adds a warning about incorrect regulators instead of
printing the names of non-information message about the wrong amount.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Mark Brown <broonie@sirena.org.uk>
* pm-cpufreq: (57 commits)
cpufreq: MAINTAINERS: Add co-maintainer
cpufreq: pxa2xx: initialize variables
ARM: S5pv210: compiling issue, ARM_S5PV210_CPUFREQ needs CONFIG_CPU_FREQ_TABLE=y
cpufreq: cpu0: Put cpu parent node after using it
cpufreq: ARM big LITTLE: Adapt to latest cpufreq updates
cpufreq: ARM big LITTLE: put DT nodes after using them
cpufreq: Don't call __cpufreq_governor() for drivers without target()
cpufreq: exynos5440: Protect OPP search calls with RCU lock
cpufreq: dbx500: Round to closest available freq
cpufreq: Call __cpufreq_governor() with correct policy->cpus mask
cpufreq / intel_pstate: Optimize intel_pstate_set_policy
cpufreq: OMAP: instantiate omap-cpufreq as a platform_driver
arm: exynos: Enable OPP library support for exynos5440
cpufreq: exynos: Remove error return even if no soc is found
cpufreq: exynos: Add cpufreq driver for exynos5440
cpufreq: AMD "frequency sensitivity feedback" powersave bias for ondemand governor
cpufreq: ondemand: allow custom powersave_bias_target handler to be registered
cpufreq: convert cpufreq_driver to using RCU
cpufreq: powerpc/platforms/cell: move cpufreq driver to drivers/cpufreq
cpufreq: sparc: move cpufreq driver to drivers/cpufreq
...
Conflicts:
MAINTAINERS (with commit a8e39c3 from pm-cpuidle)
drivers/cpufreq/cpufreq_governor.h (with commit beb0ff3)
* pm-cpuidle: (51 commits)
cpuidle: add maintainer entry
ARM: s3c64xx: cpuidle: use init/exit common routine
SH: cpuidle: use init/exit common routine
cpuidle: fix comment format
ARM: imx: cpuidle: use init/exit common routine
ARM: davinci: cpuidle: use init/exit common routine
ARM: kirkwood: cpuidle: use init/exit common routine
ARM: calxeda: cpuidle: use init/exit common routine
ARM: tegra: cpuidle: use init/exit common routine for tegra3
ARM: tegra: cpuidle: use init/exit common routine for tegra2
ARM: OMAP4: cpuidle: use init/exit common routine
ARM: shmobile: cpuidle: use init/exit common routine
ARM: tegra: cpuidle: use init/exit common routine
ARM: OMAP3: cpuidle: use init/exit common routine
ARM: at91: cpuidle: use init/exit common routine
ARM: ux500: cpuidle: use init/exit common routine
cpuidle: make a single register function for all
ARM: ux500: cpuidle: replace for_each_online_cpu by for_each_possible_cpu
cpuidle: remove en_core_tk_irqen flag
ARM: OMAP3: remove cpuidle_wrap_enter
...
* pm-assorted:
PM / OPP: add documentation to RCU head in struct opp
PM / sleep: invalidate TEST_CPUS and TEST_CORE support for freeze state
PM / sleep: add TEST_PLATFORM support for freeze state
* acpica: (33 commits)
ACPICA: Update version to 20130328
ACPICA: Add a lock to the internal object reference count mechanism
ACPICA: Fix a format string for 64-bit generation
ACPICA: Remove FORCE_DELETE option for global reference count mechanism
ACPICA: Improve error message for Index() operator
ACPICA: FADT: Remove extraneous warning for very large GPE registers
ACPICA: Fix a typo in a function header, no functional change
ACPICA: Fix a typo in an error message
ACPICA: Fix for some comments/headers
ACPICA: _OSI Support: handle any errors from acpi_os_acquire_mutex()
ACPICA: Predefine names: Add allowed argument types to master info table
ACPI: Set length even for TYPE_END_TAG acpi resource
ACPICA: Update version to 20130214
ACPICA: Object repair: Allow 0-length packages for variable-length packages
ACPICA: Disassembler: Add warnings for unresolved control methods
ACPICA: Return object repair: Add resource template repairs
ACPICA: Return object repair: Add string-to-unicode conversion
ACPICA: Split object conversion functions to a new file
ACPICA: Add mechanism for early object repairs on a per-name basis
ACPICA: Remove trailing comma in enum declarations
...
* acpi-lpss:
ACPI / LPSS: make code less confusing for reader
ACPI / LPSS: Add support for exposing LTR registers to user space
ACPI / scan: Add special handler for Intel Lynxpoint LPSS devices
* acpi-hotplug:
ACPI / memhotplug: Remove info->failed bit
ACPI / memhotplug: set info->enabled for memory present at boot time
ACPI: Verify device status after eject
acpi: remove reference to ACPI_HOTPLUG_IO
ACPI: Update _OST handling for notify
ACPI: Update PNPID match handling for notify
ACPI: Update PNPID set/free interfaces
ACPI: Remove acpi_device dependency in acpi_device_set_id()
ACPI / hotplug: Make acpi_hotplug_profile_ktype static
ACPI / scan: Make memory hotplug driver use struct acpi_scan_handler
ACPI / container: Use hotplug profile user space interface
ACPI / hotplug: Introduce user space interface for hotplug profiles
ACPI / scan: Introduce acpi_scan_handler_matching()
ACPI / container: Use common hotplug code
ACPI / scan: Introduce common code for ACPI-based device hotplug
ACPI / scan: Introduce acpi_scan_match_handler()
A late-arriving fix for musb on OMAP4, resolving an issue where the musb
IP won't be clocked and thus not functional. Small in scope, most of the
lines changed is a longish comment.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=pHY5
-----END PGP SIGNATURE-----
Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fix from Olof Johansson:
"A late-arriving fix for musb on OMAP4, resolving an issue where the
musb IP won't be clocked and thus not functional. Small in scope,
most of the lines changed is a longish comment."
* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
ARM: OMAP4: hwmod data: make 'ocp2scp_usb_phy_phy_48m" as the main clock
I think we could just move the full vm_iomap_memory() function into
util.h or similar, but I didn't get any reply from anybody actually
using nommu even to this trivial patch, so I'm not going to touch it any
more than required.
Here's the fairly minimal stub to make the nommu case at least
potentially work. It doesn't seem like anybody cares, though.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It has been reported that there is a new version (different USB rev)
of the Logitech DFGT in the 'wild'.
This patch allows the kernel to recognise this wheel and send it the
command to enter native mode.
Reported-by: "Denis Jovic" <djovic78@gmail.com>
Signed-off-by: Simon Wood <simon@mungewell.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Add some documentation about the self describing metadata and the
code templates used to implement it.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
The version 5 superblock has extended feature masks for compatible,
incompatible and read-only compatible feature sets. Implement the
masking and mount-time checking for these feature masks.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
With the addition of CRCs, there is such a wide and varied change to
the on disk format that it makes sense to bump the superblock
version number rather than try to use feature bits for all the new
functionality.
This commit introduces all the new superblock fields needed for all
the new functionality: feature masks similar to ext4, separate
project quota inodes, a LSN field for recovery and the CRC field.
This commit does not bump the superblock version number, however.
That will be done as a separate commit at the end of the series
after all the new functionality is present so we switch it all on in
one commit. This means that we can slowly introduce the changes
without them being active and hence maintain bisectability of the
tree.
This patch is based on a patch originally written by myself back
from SGI days, which was subsequently modified by Christoph Hellwig.
There is relatively little of that patch remaining, but the history
of the patch still should be acknowledged here.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
The buffer type passed to log recvoery in the buffer log item
overruns the blf_flags field. I had assumed that flags field was a
32 bit value, and it turns out it is a unisgned short. Therefore
having 19 flags doesn't really work.
Convert the buffer type field to numeric value, and use the top 5
bits of the flags field for it. We currently have 17 types of
buffers, so using 5 bits gives us plenty of room for expansion in
future....
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Add buffer types to the buffer log items so that log recovery can
validate the buffers and calculate CRCs correctly after the buffers
are recovered.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
There are two ways of doing this - the first is to add a CRC to the
remote attribute entry in the attribute block. The second is to
treat them similar to the remote symlink, where each fragment has
it's own header and identifies fragment location in the attribute.
The problem with the CRC in the remote attr entry is that we cannot
identify the owner of the metadata from the metadata blocks
themselves, or where the blocks fit into the remote attribute. The
down side to this approach is that we never know when the attribute
has been read from disk or not and so we have to verify it every
time it is read, and we must calculate it during the create
transaction and log it. We do not log CRCs for any other metadata,
and so this creates a unique set of coherency problems that, in
general, are best avoided.
Adding an identifying header to each allocated block allows us to
identify each fragment and where in the attribute it is located. It
enables us to rebuild the remote attribute from just the raw blocks
containing the attribute. It also provides us to do per-block CRCs
verification at IO time rather than during the transaction context
that creates it or every time it is read into a user buffer. Hence
it avoids all the problems that an external, logged CRC has, and
provides all the benefits of self identifying metadata.
The only complexity is that we have to add a header per fragment,
and we don't know how many fragments will be needed prior to
allocations. If we take the symlink example, the header is 56 bytes
and hence for a 4k block size filesystem, in the worst case 16
headers requires 1 extra block for the 64k attribute data. For 512
byte filesystems the worst case is an extra block for every 9
fragments (i.e. 16 extra blocks in the worse case). This will be
very rare and so it's not really a major concern.
Because allocation is done in two steps - the first finds a hole
large enough in the attribute file, the second does the allocation -
we only need to find a hole big enough for a worst case allocation.
We only need to allocate enough extra blocks for number of headers
required by the fragments, and we can calculate that as we go....
Hence it really only makes sense to use the same model as for
symlinks - it doesn't add that much complexity, does not require an
attribute tree format change, and does not require logging
calculated CRC values.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
