This patch adds device tree binding documentation for the HDMI transmitter
on i.MX6.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
This patch updates the device tree binding documentation for i.MX IPU/display
nodes using the OF graph bindings documented in
Documentation/devicetree/bindings/media/video-interfaces.txt.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Using of_graph_parse_endpoint recovers the port id from an endpoint device
tree node. This just replaces an open coded read of the "reg" property.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
This patch adds support to find the involved components connected to
the IPU display interface ports using the OF graph bindings documented
in Documentation/devicetree/bindings/media/video-interfaces.txt.
It makes use of the of_graph (formerly v4l2_of) parsing helpers and
thus depends on the patch that moves those out to drivers/of.
Each display interface needs to have an associated port node in the
device tree. We can associate this node with the crtc platform device
and use it to find the crtc corresponding to a given port node instead
of using a combination of parent device node and id number, as before.
Explicitly converting the void* cookie to the port device tree node
allows to get rid of the ipu_id and di_id fields. The multiplexer
setting on i.MX6 now can be obtained from the port id (reg property)
in the device tree.
The imx-drm node now needs a ports property that contains phandles
to each of the IPU display interface port nodes. From there, all
attached encoders are scanned and enabled encoders are added to a
waiting list.
The bind order makes sure that once all components are probed, crtcs
are bound before encoders, so that imx_drm_encoder_parse_of can be
called from the encoder bind callbacks.
For parsing the OF graph, temporary copies of the V4L2 OF graph
helpers are used, that can be removed again once those are available
at a generic place.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
PREPARE_[DELAYED_]WORK() are being phased out. They have few users
and a nasty surprise in terms of reentrancy guarantee as workqueue
considers work items to be different if they don't have the same work
function.
firewire core-device and sbp2 have been been multiplexing work items
with multiple work functions. Introduce fw_device_workfn() and
sbp2_lu_workfn() which invoke fw_device->workfn and
sbp2_logical_unit->workfn respectively and always use the two
functions as the work functions and update the users to set the
->workfn fields instead of overriding work functions using
PREPARE_DELAYED_WORK().
This fixes a variety of possible regressions since a2c1c57be8
"workqueue: consider work function when searching for busy work items"
due to which fw_workqueue lost its required non-reentrancy property.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Cc: linux1394-devel@lists.sourceforge.net
Cc: stable@vger.kernel.org # v3.9+
Cc: stable@vger.kernel.org # v3.8.2+
Cc: stable@vger.kernel.org # v3.4.60+
Cc: stable@vger.kernel.org # v3.2.40+
Add REQ_SYNC early, so rq_dispatched[] in blk_mq_rq_ctx_init
is set correctly.
Signed-off-by: Shaohua Li<shli@fusionio.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Lenovo IdeaPad 410Y with ALC282 codec makes loud click noises at boot
and shutdown. Also, it wrongly misdetects the acpi_thinkpad hook.
This patch adds a device-specific fixup for disabling the shutup
callback that is the cause of the click noise and also avoiding the
thinpad_helper calls.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=71511
Reported-and-tested-by: Guilherme Amadio <guilherme.amadio@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When copying between device and command protection scatters
we must take into account that device scatters might be offset
and we might copy outside scatter range. Thus for each cmd prot
scatter we must take the min between cmd prot scatter, dev prot
scatter, and whats left (and loop in case we havn't copied enough
from/to cmd prot scatter).
Example (single t_prot_sg of len 2048):
kernel: sbc_dif_copy_prot: se_cmd=ffff880380aaf970, left=2048, len=2048, dev_prot_sg_offset=3072, dev_prot_sg_len=4096
kernel: isert: se_cmd=ffff880380aaf970 PI error found type 0 at sector 0x2600 expected 0x0 vs actual 0x725f, lba=2580
Instead of copying 2048 from offset 3072 (copying junk outside sg
limit 4096), we must to copy 1024 and continue to next sg until
we complete cmd prot scatter.
This issue was found using iSER T10-PI offload over rd_mcp (wasn't
discovered with fileio since file_dev prot sglists are never offset).
Changes from v1:
- Fix sbc_copy_prot copy length miss-calculation
Changes from v0:
- Removed psg->offset consideration for psg_len computation
- Removed sg->offset consideration for offset condition
- Added copied consideraiton for len computation
- Added copied offset to paddr when doing memcpy
Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
The 64bit relocation code places a few symbols in the text segment.
These symbols are only 4 byte aligned where they need to be 8 byte
aligned. Add an explicit alignment.
Signed-off-by: Anton Blanchard <anton@samba.org>
Cc: stable@vger.kernel.org
Tested-by: Laurent Dufour <ldufour@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
When we fork/clone we currently don't copy any of the TM state to the new
thread. This results in a TM bad thing (program check) when the new process is
switched in as the kernel does a tmrechkpt with TEXASR FS not set. Also, since
R1 is from userspace, we trigger the bad kernel stack pointer detection. So we
end up with something like this:
Bad kernel stack pointer 0 at c0000000000404fc
cpu 0x2: Vector: 700 (Program Check) at [c00000003ffefd40]
pc: c0000000000404fc: restore_gprs+0xc0/0x148
lr: 0000000000000000
sp: 0
msr: 9000000100201030
current = 0xc000001dd1417c30
paca = 0xc00000000fe00800 softe: 0 irq_happened: 0x01
pid = 0, comm = swapper/2
WARNING: exception is not recoverable, can't continue
The below fixes this by flushing the TM state before we copy the task_struct to
the clone. To do this we go through the tmreclaim patch, which removes the
checkpointed registers from the CPU and transitions the CPU out of TM suspend
mode. Hence we need to call tmrechkpt after to restore the checkpointed state
and the TM mode for the current task.
To make this fail from userspace is simply:
tbegin
li r0, 2
sc
<boom>
Kudos to Adhemerval Zanella Neto for finding this.
Signed-off-by: Michael Neuling <mikey@neuling.org>
cc: Adhemerval Zanella Neto <azanella@br.ibm.com>
cc: stable@vger.kernel.org
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
This patch fixes the following sparse warnings:
drivers/staging/lustre/lustre/lov/lov_obd.c:342:48: warning: Using plain integer as NULL pointer
drivers/staging/lustre/lustre/lov/lov_obd.c:647:44: warning: Using plain integer as NULL pointer
drivers/staging/lustre/lustre/lov/lov_obd.c:771:46: warning: Using plain integer as NULL pointer
Signed-off-by: Himangi Saraogi <himangi774@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch removes the assignment in if conditions to do away with the
checkpatch warning :'do not use assignment in if condition'.
Signed-off-by: Himangi Saraogi <himangi774@gmail.com>
Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes the following checkpatch.pl issues in lov_ea.c
Warning: Statements terminations use 1 semicolon in lov_ea.c
Signed-off-by: Monam Agarwal <monamagarwal123@gmail.com>
Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Added code to check return value of sscanf.
Signed-off-by: John de la Garza <john@jjdev.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Removed unnecessary space before function pointer arguments.
Signed-off-by: John de la Garza <john@jjdev.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Like done in the pcl812 driver, use the boardinfo to determine what
should be reset.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Instead of using the 'board_type' and the switch, use the boardinfo
to determine what should be reset.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For aesthetics, rename the timer/counter enable request register
and define its bits.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For aesthetics, rename the clear INT request register.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The PCL812_CNTENABLE define is not used in this driver. Remove it.
For aesthetics, rename the software trigger register.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename this function so it has namespace associated with the driver.
The cmd->scan_begin_src is always TRIG_FOLLOW and the only valid
cmd->convert_src is TRIG_TIMER or TRIG_EXT so pcl818_ai_cmd_mode()
is always called with a 'mode' of 1 or 3. The 'mode' actually indicates
the trigger source.
Absorb pcl818_ai_cmd_mode() into this function and simplify the code.
This also removes the need for a forward declaration.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Absorb this function into pcl818_ai_cmd_mode() and simplify the code.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Define the bits in the register to remove the magic values.
Tidy up pcl818_ai_cancel(). The 0x73 mask of the value read from
the control register will disable dma and interrupts but it does
not change the trigger mode. So the software trigger following it
might not work.
Just disable the trigger and clear any pending end-of-conversion.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Define the bits in the register to remove the magic values.
Fix pcl816_ai_cancel(). The 0x73 mask of the value read from the control
register will not stop the A/D as indicated by the comment. This would just
clear the DS1, POE, and EXT bits which would only disable the external
trigger. Setting the control register to '0' would then stop the A/D which
means the software trigger following it would not work. Just disable the
trigger and clear any pending end-of-conversion.
Make sure the A/D trigger is disabled at the end of the (*insn_read).
Remove a couple unnecessary devpriv->dev checks. The pcl816_ai_cmd() and
pcl816_ai_poll() functions are only hooked up when devpriv->dma is valid.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For aesthetics, rename this register.
Define the bits in the register to remove the magic values.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move this function to remove the need for the forward declaration. Rename it
so it has namespace associated with the driver. Remove the unnecessary
comedi_subdevice parameter from the function.
The hardware has per-channel programmable gain. This function first sets the
range for each channel then sets the mux register to automatically scan the
channels.
The use of 'muxonechan' when programming the ranges is incorrect. Only the low
4-bits are supposed to be set when programming the ranges.
Introduce a couple helper functions to set the range for a channel and to set
the first/last channels to scan.
Tidy up the range and mux register defines.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move this function to remove the need for the forward declaration. Rename it
so it has namespace associated with the driver. Remove the unnecessary
comedi_subdevice parameter from the function.
The hardware has per-channel programmable gain. This function first sets the
range for each channel then sets the mux register to automatically scan the
channels.
Remove the need for the 'ai_act_chanlist' member in the private data. It is
only used to set the first/last channel to scan.
Introduce a couple helper functions to set the range for a channel and to set
the first/last channels to scan.
Tidy up the range and mux register defines.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move this function to remove the need for the forward declaration. Rename it
so it has namespace associated with the driver. Remove the unnecessary
comedi_subdevice parameter from the function.
The hardware does not support analog input channel scanning so the mux and
range need to be set before each (*insn_read) and when advancing to the next
channel in an async command. Instead of storing the last chan/range in the
private data just store the chanspec to determine if the mux and range need
to be changed.
Refactor pcl812_reset() a bit so we can use the helper function to set the
mux and range.
Define the bits in the mux register to remove the magic values.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Define the bits in the status register.
Writing any value to the status register clears any pending interrupt.
For aesthetics, rename the status register and remove the "clrint"
register.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Define the bits in the status register.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Define the bits in the status register and remove the magic values.
Writing any value to the status register clears any pending interrupt.
For aesthetics, rename the status register and remove the "clrint"
register.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For aesthetics, rename the analog input register defines and convert
the offsets to hex.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For aesthetics, rename the analog input register defines and convert
the offsets to hex.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For aesthetics, rename the analog input register defines and convert
the offsets to hex.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Introduce a helper function to start a software triggered analog input
conversion.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Introduce a helper function to start a software triggered analog input
conversion.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Introduce a helper function to start a software triggered analog input
conversion.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Introduce a helper function to clear the end-of-conversion flag.
This flag is set when an analog input conversion is finished and the
hardware generates an interrupt request. Writing any value to the
register resets the flag and re-enables the interrupt.
Remove the clearing of the flag in pcl818_handle_eoc(). The interrupt
function will handle clearing the flag.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Introduce a helper function to clear the end-of-conversion flag.
This flag is set when an analog input conversion is finished and the
hardware generates an interrupt request. Writing any value to the
register resets the flag and re-enables the interrupt.
Move the call in pcl816_ai_cancel() so that the flag is reset after
stopping the A/D.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Introduce a helper function to clear the end-of-conversion flag.
This flag is set when an analog input conversion is finished and the
hardware generates an interrupt request. Writing any value to the
register resets the flag and re-enables the interrupt.
Remove a redundant call in pcl812_ai_cancel().
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For aesthetics, move this function out of the async command support
code.
For safety, the INT request (end-of-conversion flag) should be cleared
before doing each conversion and after the final data sample is read.
The driver currently does not do this.
Refactor the function a bit so it's more like the pcl818 and pcl816
drivers and use common code to clear the flag for a timeout and after
the last sample.
Do a bit of other tidying up during the move.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For aesthetics, move this function out of the async command support
code.
For safety, the INT request (end-of-conversion flag) should be cleared
before doing each conversion and after the final data sample is read.
This driver does that but it's a bit awkward with the initial clear being
outside the for loop that reads the samples.
Refactor the function a bit so it's more like the pcl818 driver and we
can use common code to clear the flag for a timeout and after the last
sample.
Do a bit of other tidying up during the move.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For aesthetics, move this function out of the async command support
code.
For safety, the INT request (end-of-conversion flag) should be cleared
before doing each conversion and after the final data sample is read.
This driver already clears the flag before starting a conversion but it
does not clear the flag after the final sample.
Refactor the function a bit so that the flag is cleared for a conversion
timeout and after the last sample.
Do a bit of other tidying up during the move.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For aesthetics, tidy up the analog output subdevice code.
Change the regsiter map defines to simplify the code.
Move the analog subdevice support functions out of the analog input
support functions. Tidy them up a bit during the move.
Reverse the logic of the subdevice init and add some whitespace.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For aesthetics, tidy up the analog output subdevice code.
Change the regsiter map defines to simplify the code.
Move the analog subdevice support functions out of the analog input
support functions. Tidy them up a bit during the move.
Add some whitespace to the subdevice init.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For aesthetics, move this function to follow the pcl812 and pcl818 drivers
better.
Remove the commented out cut-and-paste code from the pcl818 driver.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
