ACPI hotplug panic with current git head
http://lkml.org/lkml/2009/1/10/136
Rather than reverting the entire commit that causes the crash:
e8c331e963
"PCI hotplug: introduce functions for ACPI slot detection"
simply harden against it while the changes to
the hotplug code on this particularl machine are understood.
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Len Brown <len.brown@intel.com>
Although rfkill support for the EEE bluetooth device has been added to
2.6.28-rc the appropriate ACPI accessor definitions were not added, so
the support was non functional. The patch below adds the get and set
accessors and has been verified to work on an EEE 901.
Signed-off-by: Jonathan McDowell <noodles@earth.li>
Acked-by: Matthew Garrett <mjg@redhat.com>
Acked-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Len Brown <len.brown@intel.com>
Make the comment for ACPI_FADT_S4_RTC_WAKE match the ACPI spec;
that bit has nothing to do with status bits.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Len Brown <len.brown@intel.com>
Check CONFIG_FREEZER instead of CONFIG_PM because kprobe booster
depends on freeze_processes() and thaw_processes() when CONFIG_PREEMPT=y.
This fixes a linkage error which occurs when CONFIG_PREEMPT=y, CONFIG_PM=y
and CONFIG_FREEZER=n.
Reported-by: Cheng Renquan <crquan@gmail.com>
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Len Brown <len.brown@intel.com>
Freezer fails to compile if with the following configuration
settings:
CONFIG_CGROUPS=y
CONFIG_CGROUP_FREEZER=y
CONFIG_MODULES=y
CONFIG_FREEZER=y
CONFIG_PM=y
CONFIG_PM_SLEEP=n
Fix this by making process.o compilation depend on CONFIG_FREEZER.
Reported-by: Cheng Renquan <crquan@gmail.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Len Brown <len.brown@intel.com>
Fixes a build error in absence of CONFIG_IPV6:
drivers/net/netxen/netxen_nic_main.c:1189: error: implicit declaration of function 'ipv6_hdr'
drivers/net/netxen/netxen_nic_main.c:1189: error: invalid type argument of '->'
Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
For NX3031 only one I/O range is mapped, so unmapping other
two which are used by older chips, causes this warning on
ppc64.
"Attempt to iounmap early bolted mapping at 0x0000000000000000"
Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
* git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable:
Btrfs: fix ioctl arg size (userland incompatible change!)
Btrfs: Clear the device->running_pending flag before bailing on congestion
We implement dqget() and dqput() that need neither dqonoff_mutex nor dqptr_sem.
Then move dqget() and dqput() calls so that they are not called from under
dqptr_sem. This is important because filesystem callbacks aren't called from
under dqptr_sem which used to cause *lots* of problems with lock ranking
(and with OCFS2 they became close to unsolvable).
The patch also removes two functions which were introduced solely because OCFS2
needed them to cope with the old locking scheme. As time showed, they were not
enough for OCFS2 anyway and it would be unnecessary work to adapt them to the
new locking scheme in which they aren't needed. As a result OCFS2 needs the
following patch to compile properly with quotas. Sorry to any bisecters which
hit this in advance.
Signed-off-by: Jan Kara <jack@suse.cz>
The structure used to send device in btrfs ioctl calls was not
properly aligned, and so 32 bit ioctls would not work properly on
64 bit kernels.
We could fix this with compat ioctls, but we're just one byte away
and it doesn't make sense at this stage to carry about the compat ioctls
forever at this stage in the project.
This patch brings the ioctl arg up to an evenly aligned 4k.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Btrfs maintains a queue of async bio submissions so the checksumming
threads don't have to wait on get_request_wait. In order to avoid
extra wakeups, this code has a running_pending flag that is used
to tell new submissions they don't need to wake the thread.
When the threads notice congestion on a single device, they
may decide to requeue the job and move on to other devices. This
makes sure the running_pending flag is cleared before the
job is requeued.
It should help avoid IO stalls by making sure the task is woken up
when new submissions come in.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Otherwise it can be very confusing to find a "EXT3-fs: " failure in
the middle of EXT4-fs failures, and it makes it harder to track the
source of the failure.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
serial: Add 16850 uart type support to OF uart driver
hvc_console: Remove tty->low_latency
powerpc: Get the number of SLBs from "slb-size" property
powerpc: is_hugepage_only_range() must account for both 4kB and 64kB slices
powerpc/ps3: printing fixups for l64 to ll64 conversion drivers/video
powerpc/ps3: Printing fixups for l64 to ll64 conversion drivers/scsi
powerpc/ps3: Printing fixups for l64 to ll64 conversion drivers/ps3
powerpc/ps3: Printing fixups for l64 to ll64 conversion sound/ppc
powerpc/ps3: Printing fixups for l64 to ll64 conversion drivers/char
powerpc/ps3: Printing fixups for l64 to ll64 conversion drivers/block
powerpc/ps3: Printing fixups for l64 to ll64 conversion arch/powerpc
powerpc/ps3: ps3_repository_read_mm_info() takes u64 * arguments
powerpc/ps3: clear_bit()/set_bit() operate on unsigned longs
powerpc/ps3: The lv1_ routines have u64 parameters
powerpc/ps3: Use dma_addr_t down through the stack
powerpc/ps3: set_dabr() takes an unsigned long
powerpc: Cleanup from l64 to ll64 change drivers/scsi
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:
sata_fsl: Return non-zero on error in probe()
drivers/ata/pata_ali.c: s/isa_bridge/ali_isa_bridge/ to fix alpha build
libata: New driver for OCTEON SOC Compact Flash interface (v7).
libata: Add another column to the ata_timing table.
sata_via: Add VT8261 support
pata_atiixp: update port enabledness test handling
[libata] get-identity ioctl: Fix use of invalid memory pointer
<mach/hardware.h> doesn't exist on AVR32 and therefore this driver won't
build on that arch. AFAICT this driver doesn't actually use the content
of that header so easiest just to remove it.
Signed-off-by: Ben Nizette <bn@niasdigital.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
This reverts commit 98e6e286d7, as Yinghai
Lu reports that it breaks kexec with at least the e1000 and e1000e
drivers. The reason is that the shutdown sequence puts the hardware
into D3 sleep, and the commit causes us to claim that it then is in D0
(running) state just because we don't understand the PM capabilities.
Which then later makes "pci_set_power_state()" not do anything, and the
device never wakes up properly and just returns 0xff to everything.
Reported-by: Yinghai Lu <yinghai@kernel.org>
Acked-by: From: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Jesse Barnes <jesse.barnes@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Make sure the rec_len field in the '..' entry is sane, lest we overrun
the directory block and cause a kernel oops on a purposefully
corrupted filesystem.
This fixes a bug related to a bug originally reported by Sami Liedes
for ext4 at:
http://bugzilla.kernel.org/show_bug.cgi?id=12430
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@kernel.org
Make sure the rec_len field in the '..' entry is sane, lest we overrun
the directory block and cause a kernel oops on a purposefully
corrupted filesystem.
Thanks to Sami Liedes for reporting this bug.
http://bugzilla.kernel.org/show_bug.cgi?id=12430
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@kernel.org
Directories are not allowed to be bigger than 2GB, so don't use
i_size_high for anything other than regular files. E2fsck should
complain about these inodes, but the simplest thing to do for the
kernel is to only use i_size_high for regular files.
This prevents an intentially corrupted filesystem from causing the
kernel to burn a huge amount of CPU and issuing error messages such
as:
EXT4-fs warning (device loop0): ext4_block_to_path: block 135090028 > max
Thanks to David Maciejak from Fortinet's FortiGuard Global Security
Research Team for reporting this issue.
http://bugzilla.kernel.org/show_bug.cgi?id=12375
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@kernel.org
while I was looking over kernel sources I've found this small bug.
Formerly, zero was returned even if an error happened.
Signed-off-by: Michal Sojka <sojkam1@fel.cvut.cz>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
drivers/ata/pata_ali.c:44: error: static declaration of 'isa_bridge' follows non-static declaration
arch/alpha/include/asm/pci.h:274: error: previous declaration of 'isa_bridge' was here
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Cavium OCTEON processor support was recently merged, so now we have
this CF driver for your consideration.
Most OCTEON variants have *no* DMA or interrupt support on the CF
interface so for these, only PIO is supported. Although if DMA is
available, we do take advantage of it.
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
The forthcoming OCTEON SOC Compact Flash driver needs an additional
timing value that was not available in the ata_timing table. I add a
new column for dmack_hold time. The values were obtained from the
Compact Flash specification Rev 4.1.
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Port enabledness test fits much better into init_one() instead of
pre_reset(). The reason why these tests are in pre_reset() is purely
historical at this point. Move it to init_one(). This will help
further changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
for SAS drivers.
Caught by Ke Wei (and team?) at Marvell.
Also, move the ata_scsi_ioctl export to libata-scsi.c, as that seems to be the
general trend.
Acked-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
On x86_64, if get_per_cpu_var() is used before per cpu area is setup
(if lockdep is turned on, it happens), it needs this_cpu_off to point
to __per_cpu_load. Initialize accordingly.
Signed-off-by: Tejun Heo <tj@kernel.org>
It is an optimization and a cleanup, and adds the following new
generic percpu methods:
percpu_read()
percpu_write()
percpu_add()
percpu_sub()
percpu_and()
percpu_or()
percpu_xor()
and implements support for them on x86. (other architectures will fall
back to a default implementation)
The advantage is that for example to read a local percpu variable,
instead of this sequence:
return __get_cpu_var(var);
ffffffff8102ca2b: 48 8b 14 fd 80 09 74 mov -0x7e8bf680(,%rdi,8),%rdx
ffffffff8102ca32: 81
ffffffff8102ca33: 48 c7 c0 d8 59 00 00 mov $0x59d8,%rax
ffffffff8102ca3a: 48 8b 04 10 mov (%rax,%rdx,1),%rax
We can get a single instruction by using the optimized variants:
return percpu_read(var);
ffffffff8102ca3f: 65 48 8b 05 91 8f fd mov %gs:0x7efd8f91(%rip),%rax
I also cleaned up the x86-specific APIs and made the x86 code use
these new generic percpu primitives.
tj: * fixed generic percpu_sub() definition as Roel Kluin pointed out
* added percpu_and() for completeness's sake
* made generic percpu ops atomic against preemption
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Tejun Heo <tj@kernel.org>
Do the following cleanups:
* kill x86_64_init_pda() which now is equivalent to pda_init()
* use per_cpu_offset() instead of cpu_pda() when initializing
initial_gs
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
pda is now a percpu variable and there's no reason it can't use plain
x86 percpu accessors. Add x86_test_and_clear_bit_percpu() and replace
pda op implementations with wrappers around x86 percpu accessors.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
[ Based on original patch from Christoph Lameter and Mike Travis. ]
As pda is now allocated in percpu area, it can easily be made a proper
percpu variable. Make it so by defining per cpu symbol from linker
script and declaring it in C code for SMP and simply defining it for
UP. This change cleans up code and brings SMP and UP closer a bit.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Now that pda is allocated as part of percpu, percpu doesn't need to be
accessed through pda. Unify x86_64 SMP percpu access with x86_32 SMP
one. Other than the segment register, operand size and the base of
percpu symbols, they behave identical now.
This patch replaces now unnecessary pda->data_offset with a dummy
field which is necessary to keep stack_canary at its place. This
patch also moves per_cpu_offset initialization out of init_gdt() into
setup_per_cpu_areas(). Note that this change also necessitates
explicit per_cpu_offset initializations in voyager_smp.c.
With this change, x86_OP_percpu()'s are as efficient on x86_64 as on
x86_32 and also x86_64 can use assembly PER_CPU macros.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
[ Based on original patch from Christoph Lameter and Mike Travis. ]
Currently pdas and percpu areas are allocated separately. %gs points
to local pda and percpu area can be reached using pda->data_offset.
This patch folds pda into percpu area.
Due to strange gcc requirement, pda needs to be at the beginning of
the percpu area so that pda->stack_canary is at %gs:40. To achieve
this, a new percpu output section macro - PERCPU_VADDR_PREALLOC() - is
added and used to reserve pda sized chunk at the start of the percpu
area.
After this change, for boot cpu, %gs first points to pda in the
data.init area and later during setup_per_cpu_areas() gets updated to
point to the actual pda. This means that setup_per_cpu_areas() need
to reload %gs for CPU0 while clearing pda area for other cpus as cpu0
already has modified it when control reaches setup_per_cpu_areas().
This patch also removes now unnecessary get_local_pda() and its call
sites.
A lot of this patch is taken from Mike Travis' "x86_64: Fold pda into
per cpu area" patch.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
_cpu_pda array first uses statically allocated storage in data.init
and then switches to allocated bootmem to conserve space. However,
after folding pda area into percpu area, _cpu_pda array will be
removed completely. Drop the reallocation part to simplify the code
for soon-to-follow changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
[ Based on original patch from Christoph Lameter and Mike Travis. ]
CPU startup code in head_64.S loaded address of a zero page into %gs
for temporary use till pda is loaded but address to the actual pda is
available at the point. Load the real address directly instead.
This will help unifying percpu and pda handling later on.
This patch is mostly taken from Mike Travis' "x86_64: Fold pda into
per cpu area" patch.
Signed-off-by: Tejun Heo <tj@kernel.org>
[ Based on original patch from Christoph Lameter and Mike Travis. ]
This patch makes percpu symbols zerobased on x86_64 SMP by adding
PERCPU_VADDR() to vmlinux.lds.h which helps setting explicit vaddr on
the percpu output section and using it in vmlinux_64.lds.S. A new
PHDR is added as existing ones cannot contain sections near address
zero. PERCPU_VADDR() also adds a new symbol __per_cpu_load which
always points to the vaddr of the loaded percpu data.init region.
The following adjustments have been made to accomodate the address
change.
* code to locate percpu gdt_page in head_64.S is updated to add the
load address to the gdt_page offset.
* __per_cpu_load is used in places where access to the init data area
is necessary.
* pda->data_offset is initialized soon after C code is entered as zero
value doesn't work anymore.
This patch is mostly taken from Mike Travis' "x86_64: Base percpu
variables at zero" patch.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Make vmlinux_32.lds.S use the generic PERCPU() macro instead of open
coding it. This will ease future changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
[ Based on original patch from Christoph Lameter and Mike Travis. ]
* Ruggedize some calls in setup_percpu.c to prevent mishaps
in early calls, particularly for non-critical functions.
* Cleanup DEBUG_PER_CPU_MAPS usages and some comments.
Signed-off-by: Mike Travis <travis@sgi.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
