ADT7463 and ADT7468 optionally support VID5 instead of the standard +12V
measurement input. Use a boolean to identify the chip configuration instead of
hardcoding it several times.
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Acked-by: Jean Delvare <khali@linux-fr.org>
This patch adds support for hardware monitoring of Lineage Compact Power Line
Power Entry Modules.
Reviewed-by: Tom Grennan <tom.grennan@ericsson.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
There is a move to deprecate bus-specific PM operations and move to
using dev_pm_ops instead in order to reduce the amount of boilerplate
code in buses and facilitiate updates to the PM core. Do this move for
the lis3lv02d SPI driver.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
This patch initializes register CONFIG3 to a reasonable default PWM frequency
of 25kHz, to prevent audible sound in fan.
Signed-off-by: Roland Stigge <stigge@antcom.de>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
This feature adds messaging to the link status change to notify
the user if the device returned from a downshift or power off
event due to the Thermal Sensor feature in i350 parts. Feature
is only available on internal copper ports.
Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Hardware timestamping for Intel 82580 didn't work in either 2.6.36 or
2.6.37. Comparing it to Intel's igb-2.4.12 I found that the
timecounter_init clock/counter initialization was done too early.
Signed-off-by: Anders Berggren <andfers@halon.se>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
commit e9a799ea4a (xen: netfront: ethtool stats fields should be
unsigned long) made rx_gso_checksum_fixup an unsigned long.
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Break out the portions of __ip_vs_control_init() and
__ip_vs_control_cleanup() where aren't necessary when
CONFIG_SYSCTL is undefined.
Signed-off-by: Simon Horman <horms@verge.net.au>
ip_vs_lblc_table and ip_vs_lblcr_table, and code that uses them
are unnecessary when CONFIG_SYSCTL is undefined.
Signed-off-by: Simon Horman <horms@verge.net.au>
Much of ip_vs_leave() is unnecessary if CONFIG_SYSCTL is undefined.
I tried an approach of breaking the now #ifdef'ed portions out
into a separate function. However this appeared to grow the
compiled code on x86_64 by about 200 bytes in the case where
CONFIG_SYSCTL is defined. So I have gone with the simpler though
less elegant #ifdef'ed solution for now.
Signed-off-by: Simon Horman <horms@verge.net.au>
ip_vs_conntrack_enabled() becomes a noop when CONFIG_SYSCTL is undefined.
In preparation for not including sysctl_conntrack in
struct netns_ipvs when CONFIG_SYCTL is not defined.
Signed-off-by: Simon Horman <horms@verge.net.au>
In preparation for not including sysctl_lblc{r}_expiration in
struct netns_ipvs when CONFIG_SYCTL is not defined.
Signed-off-by: Simon Horman <horms@verge.net.au>
In preparation for not including sysctl_expire_quiescent_template in
struct netns_ipvs when CONFIG_SYCTL is not defined.
Signed-off-by: Simon Horman <horms@verge.net.au>
In preparation for not including sysctl_expire_nodest_conn in
struct netns_ipvs when CONFIG_SYCTL is not defined.
Signed-off-by: Simon Horman <horms@verge.net.au>
In preparation for not including sysctl_sync_ver in
struct netns_ipvs when CONFIG_SYCTL is not defined.
Signed-off-by: Simon Horman <horms@verge.net.au>
In preparation for not including sysctl_sync_threshold in
struct netns_ipvs when CONFIG_SYCTL is not defined.
Signed-off-by: Simon Horman <horms@verge.net.au>
In preparation for not including sysctl_nat_icmp_send in
struct netns_ipvs when CONFIG_SYCTL is not defined.
Signed-off-by: Simon Horman <horms@verge.net.au>
In preparation for not including sysctl_snat_reroute in
struct netns_ipvs when CONFIG_SYCTL is not defined.
Signed-off-by: Simon Horman <horms@verge.net.au>
Rename ip_vs_new_estimator to ip_vs_start_estimator
and ip_vs_kill_estimator to ip_vs_stop_estimator to better
match their logic.
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
Move the estimator reading from estimation_timer to user
context. ip_vs_read_estimator() will be used to decode the rate
values. As the decoded rates are not set by estimation timer
there is no need to reset them in ip_vs_zero_stats.
There is no need ip_vs_new_estimator() to encode stats
to rates, if the destination is in trash both the stats and the
rates are inactive.
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
Remove ustats_seq, IPVS_STAT_INC and IPVS_STAT_ADD
because they are not used. They were replaced with u64_stats.
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
Currently, the new percpu counters are not zeroed and
the zero commands do not work as expected, we still show the old
sum of percpu values. OTOH, we can not reset the percpu counters
from user context without causing the incrementing to use old
and bogus values.
So, as Eric Dumazet suggested fix that by moving all overhead
to stats reading in user context. Do not introduce overhead in
timer context (estimator) and incrementing (packet handling in
softirqs).
The new ustats0 field holds the zero point for all
counter values, the rates always use 0 as base value as before.
When showing the values to user space just give the difference
between counters and the base values. The only drawback is that
percpu stats are not zeroed, they are accessible only from /proc
and are new interface, so it should not be a compatibility problem
as long as the sum stats are correct after zeroing.
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
The global tot_stats contains cpustats field just like the
stats for dest and svc, so better use it to simplify the usage
in estimation_timer. As tot_stats is registered as estimator
we can remove the special ip_vs_read_cpu_stats call for
tot_stats. Fix ip_vs_read_cpu_stats to be called under
stats lock because it is still used as synchronization between
estimation timer and user context (the stats readers).
Also, make sure ip_vs_stats_percpu_show reads properly
the u64 stats from user context.
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
Remove include/net/netns/ip_vs.h because it depends on
structures from include/net/ip_vs.h. As ipvs is pointer in
struct net it is better to move struct netns_ipvs into
include/net/ip_vs.h, so that we can easily use other structures
in struct netns_ipvs.
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
There's no sense to 'ct = ct = ' in ip_vs_notrack(). Just assign
nf_ct_get()'s return value directly to the pointer variable 'ct' once.
Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Simon Horman <horms@verge.net.au>
The semantic patch that makes this output is available
in scripts/coccinelle/api/memdup.cocci.
More information about semantic patching is available at
http://coccinelle.lip6.fr/
Signed-off-by: Shan Wei <shanwei@cn.fujitsu.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
ip_vs_read_cpu_stats is called only from timer, so
no need for _bh locks.
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Hans Schillstrom <hans@schillstrom.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
Restore the previous behaviour to lookup for fwmark
service only when fwmark is non-null. This saves only CPU.
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Hans Schillstrom <hans@schillstrom.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
This patch is to add Dell MD36xxf array into the RDAC handler device list.
Singed-off-by: Yanqing Liu <Yanqing_Liu@Dell.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
This adds defines for the app selector values currently
defined in the IEEE 802.1Qaz specification.
Signed-off-by: Mark Rustad <mark.d.rustad@intel.com>
Signed-off-by: John Fastabend <john.r.fastabend@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix a few spelling errors in dcbnl.h.
Signed-off-by: Mark Rustad <mark.d.rustad@intel.com>
Signed-off-by: John Fastabend <john.r.fastabend@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Mark Rustad <mark.d.rustad@intel.com>
Signed-off-by: John Fastabend <john.r.fastabend@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A useful test case for error recovery is multiple,
consecutive medium errors. When scsi_debug is started
with "opts=2" a MEDIUM ERROR is generated when block
0x1234 (4660) is read. The patch extends that to
10 consecutive blocks from 0x1234 (i.e. blocks 4660 to
4669 inclusive).
[0:0:0:0] disk ATA INTEL SSD 2CV1 /dev/sda /dev/sg0 80.0GB
[10:0:0:0] disk Linux scsi_debug 0004 /dev/sdb /dev/sg1 1.09TB
Output file not specified so no copy, just reading input
>> unrecovered read error at blk=4660, substitute zeros
...
>> unrecovered read error at blk=4669, substitute zeros
4670+10 records in
0+0 records out
10 unrecovered read errors
lowest unrecovered read lba=4660, highest unrecovered lba=4669
time to read data: 0.047943 secs at 49.87 MB/sec
BTW Change /dev/sg1 (bsg device works just as well) to
/dev/sdb to see why, with faulty media, you do not want
to use the block layer interface. Reason: time block
layer takes to do useless retries and collateral damage
to data in its 4 KB blocks (O_DIRECT mitigates the
latter).
ChangeLog:
- extend opts=2 medium error generation at block
0x1234 to 10 consecutive blocks (i.e. blocks
0x1234 to 0x123d).
Signed-off-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* 'nouveau/drm-nouveau-next' of ../drm-nouveau-next:
drm/nouveau: fix __nouveau_fence_wait performance
drm/nv40: attempt to reserve just enough vram for all 32 channels
drm/nv50: check for vm traps on every gr irq
drm/nv50: decode vm faults some more
drm/nouveau: add nouveau_enum_find() util function
drm/nouveau: properly handle pushbuffer check failures
drm/nvc0: remove vm hack forcing large/small pages to not share a PDE
When the lower device has offloading capabilities, the packets checksums
are not computed. That leads to have any macvlan port in bridge mode to
not work because the packets are dropped due to a bad checksum.
If the macvlan is in bridge mode, the packet is forwarded to another
macvlan port and reach the network stack where it looks for a checksum
but this one was not computed due to the offloading of the lower device.
In this case, we have to set the packet with CHECKSUM_UNNECESSARY
when it is forwarded to a bridged port and restore the previous value of
ip_summed when the packet goes to the lowerdev.
Signed-off-by: Daniel Lezcano <daniel.lezcano@free.fr>
Cc: Patrick McHardy <kaber@trash.net>
Cc: Andrian Nord <nightnord@gmail.com>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Check for bonding master and refuse to use that.
Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Acked-by: Robert Love <robert.w.love@intel.com>
Acked-by: James Bottomley <James.Bottomley@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
QQ2440 is only another non-ISA board using CS89x0. This patch adds the
minimum bits required to make QQ2440 work with CS89x0.
Signed-off-by: Domenico Andreoli <cavokz@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
CS89x0_NONISA_IRQ is selected by all those non-ISA boards which use
CS89x0. This patch only cleans the last bits left after its introduction.
Signed-off-by: Domenico Andreoli <cavokz@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
I think this stems from a misunderstanding of how the ata error handler
works. ata_scsi_cmd_error_handler() gets called with a passed in list
of commands to handle. However, that list may still not be empty when
it exits. The command ata_scsi_port_error_handler() must be called
(which takes no list) before the list will be completely emptied. This
bites the sas error handler because the two are called from different
functions and the original list has gone out of scope before
ata_scsi_port_error_handler() is called. leading to some commands
dangling on bare stack, which is a potential memory corruption issue.
Fix this by manually deleting all outstanding commands from the on-stack
list before it goes out of scope.
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
The hibernate image size autotuning mechanism sets the default
image size to 5/2 of the total system RAM, but it is reported
that on some systems device drivers allocate substantial
amounts of memory during suspend and the creation of the image
fails as a result (too little memory is preallocated).
Modify the autotuning mechanism to use 1/3 instead of 2/5 of RAM
as the default image size, which is reported to be sufficient for
the affected systems.
References: https://bugzilla.kernel.org/show_bug.cgi?id=30482
Reported-and-tested-by: Martin Steigerwald <Martin@Lichtvoll.de>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
This attribute, requested by Redhat, allows kexec-tools to know
whether the controller can honor the reset_devices kernel parameter
and actually reset the controller. For kdump to work properly it
is necessary that the reset_devices parameter be honored. This
attribute enables kexec-tools to warn the user if they attempt to
designate a non-resettable controller as the dump device.
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Some subsystems need to carry out suspend/resume and shutdown
operations with one CPU on-line and interrupts disabled. The only
way to register such operations is to define a sysdev class and
a sysdev specifically for this purpose which is cumbersome and
inefficient. Moreover, the arguments taken by sysdev suspend,
resume and shutdown callbacks are practically never necessary.
For this reason, introduce a simpler interface allowing subsystems
to register operations to be executed very late during system suspend
and shutdown and very early during resume in the form of
strcut syscore_ops objects.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
I have a machine where entering deep C-states broke.
pm_qos was a hot candidate, but I couldn't find any way to double
check without the need of recompiling.
While in this case it was a driver bug (ath9k):
https://bugzilla.kernel.org/show_bug.cgi?id=27532
powertop or others may want to read out cpu_dma_latency
restrictions which could be the cause of preventing a machine
entering deeper C-states.
Output with this patch:
# default value of 2000 * USEC_PER_SEC (0x77359400)
cat /dev/network_latency |hexdump
0000000 9400 7735
0000004
# value of 55 us which is the reason for not entering C2
cat /dev/cpu_dma_latency |hexdump
0000000 0037 0000
0000004
There is no reason to hide this info -> make pm_qos files readable.
Signed-off-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
opp_find_freq_exact() documentation has is_available instead
of available. This also fixes warning with the kernel-doc:
scripts/kernel-doc drivers/base/power/opp.c >/dev/null
Warning(drivers/base/power/opp.c:246): No description found for parameter 'available'
Warning(drivers/base/power/opp.c:246): Excess function parameter 'is_available' description in 'opp_find_freq_exact'
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
