Commit graph

371682 commits

Author SHA1 Message Date
Mark Rutland
c47d6a04e6 arm64: klib: bitops: fix unpredictable stxr usage
We're currently relying on unpredictable behaviour in our testops
(test_and_*_bit), as stxr is unpredictable when the status register and
the source register are the same

This patch changes reallocates the status register so as to bring us back into
the realm of predictable behaviour. Boot tested on an AEMv8 model.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2013-04-30 15:53:01 +01:00
Linus Torvalds
8700c95adb Merge branch 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull SMP/hotplug changes from Ingo Molnar:
 "This is a pretty large, multi-arch series unifying and generalizing
  the various disjunct pieces of idle routines that architectures have
  historically copied from each other and have grown in random, wildly
  inconsistent and sometimes buggy directions:

   101 files changed, 455 insertions(+), 1328 deletions(-)

  this went through a number of review and test iterations before it was
  committed, it was tested on various architectures, was exposed to
  linux-next for quite some time - nevertheless it might cause problems
  on architectures that don't read the mailing lists and don't regularly
  test linux-next.

  This cat herding excercise was motivated by the -rt kernel, and was
  brought to you by Thomas "the Whip" Gleixner."

* 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (40 commits)
  idle: Remove GENERIC_IDLE_LOOP config switch
  um: Use generic idle loop
  ia64: Make sure interrupts enabled when we "safe_halt()"
  sparc: Use generic idle loop
  idle: Remove unused ARCH_HAS_DEFAULT_IDLE
  bfin: Fix typo in arch_cpu_idle()
  xtensa: Use generic idle loop
  x86: Use generic idle loop
  unicore: Use generic idle loop
  tile: Use generic idle loop
  tile: Enter idle with preemption disabled
  sh: Use generic idle loop
  score: Use generic idle loop
  s390: Use generic idle loop
  powerpc: Use generic idle loop
  parisc: Use generic idle loop
  openrisc: Use generic idle loop
  mn10300: Use generic idle loop
  mips: Use generic idle loop
  microblaze: Use generic idle loop
  ...
2013-04-30 07:50:17 -07:00
Mark Brown
2fdfe1c26f mmc: sdhci-s3c: Fix operation on non-single image Samsung platforms
Commit cc014f3 (mmc: sdhci-s3c: remove platform dependencies) changed
the platform dependency in Kconfig to depend on SAMSUNG_SINGLE, meaning
the driver was available only on single zImage Samsung platforms.  This
breaks platforms that haven't been converted such as S3C64xx.  Revert
that part of the change to fix.

[arnd: CONFIG_SAMSUNG_SINGLE was actually introduced only for
non-multiplatform configurations, but was subsequently removed,
which means the driver was now broken both for single- and multi-
platform. The dependency was there by accident anyway, so reverting
this is still the correct solution]

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-04-30 16:44:43 +02:00
Linus Torvalds
16fa94b532 Merge branch 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler changes from Ingo Molnar:
 "The main changes in this development cycle were:

   - full dynticks preparatory work by Frederic Weisbecker

   - factor out the cpu time accounting code better, by Li Zefan

   - multi-CPU load balancer cleanups and improvements by Joonsoo Kim

   - various smaller fixes and cleanups"

* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (45 commits)
  sched: Fix init NOHZ_IDLE flag
  sched: Prevent to re-select dst-cpu in load_balance()
  sched: Rename load_balance_tmpmask to load_balance_mask
  sched: Move up affinity check to mitigate useless redoing overhead
  sched: Don't consider other cpus in our group in case of NEWLY_IDLE
  sched: Explicitly cpu_idle_type checking in rebalance_domains()
  sched: Change position of resched_cpu() in load_balance()
  sched: Fix wrong rq's runnable_avg update with rt tasks
  sched: Document task_struct::personality field
  sched/cpuacct/UML: Fix header file dependency bug on the UML build
  cgroup: Kill subsys.active flag
  sched/cpuacct: No need to check subsys active state
  sched/cpuacct: Initialize cpuacct subsystem earlier
  sched/cpuacct: Initialize root cpuacct earlier
  sched/cpuacct: Allocate per_cpu cpuusage for root cpuacct statically
  sched/cpuacct: Clean up cpuacct.h
  sched/cpuacct: Remove redundant NULL checks in cpuacct_acount_field()
  sched/cpuacct: Remove redundant NULL checks in cpuacct_charge()
  sched/cpuacct: Add cpuacct_acount_field()
  sched/cpuacct: Add cpuacct_init()
  ...
2013-04-30 07:43:28 -07:00
Linus Torvalds
e0972916e8 Merge branch 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf updates from Ingo Molnar:
 "Features:

   - Add "uretprobes" - an optimization to uprobes, like kretprobes are
     an optimization to kprobes.  "perf probe -x file sym%return" now
     works like kretprobes.  By Oleg Nesterov.

   - Introduce per core aggregation in 'perf stat', from Stephane
     Eranian.

   - Add memory profiling via PEBS, from Stephane Eranian.

   - Event group view for 'annotate' in --stdio, --tui and --gtk, from
     Namhyung Kim.

   - Add support for AMD NB and L2I "uncore" counters, by Jacob Shin.

   - Add Ivy Bridge-EP uncore support, by Zheng Yan

   - IBM zEnterprise EC12 oprofile support patchlet from Robert Richter.

   - Add perf test entries for checking breakpoint overflow signal
     handler issues, from Jiri Olsa.

   - Add perf test entry for for checking number of EXIT events, from
     Namhyung Kim.

   - Add perf test entries for checking --cpu in record and stat, from
     Jiri Olsa.

   - Introduce perf stat --repeat forever, from Frederik Deweerdt.

   - Add --no-demangle to report/top, from Namhyung Kim.

   - PowerPC fixes plus a couple of cleanups/optimizations in uprobes
     and trace_uprobes, by Oleg Nesterov.

  Various fixes and refactorings:

   - Fix dependency of the python binding wrt libtraceevent, from
     Naohiro Aota.

   - Simplify some perf_evlist methods and to allow 'stat' to share code
     with 'record' and 'trace', by Arnaldo Carvalho de Melo.

   - Remove dead code in related to libtraceevent integration, from
     Namhyung Kim.

   - Revert "perf sched: Handle PERF_RECORD_EXIT events" to get 'perf
     sched lat' back working, by Arnaldo Carvalho de Melo

   - We don't use Newt anymore, just plain libslang, by Arnaldo Carvalho
     de Melo.

   - Kill a bunch of die() calls, from Namhyung Kim.

   - Fix build on non-glibc systems due to libio.h absence, from Cody P
     Schafer.

   - Remove some perf_session and tracing dead code, from David Ahern.

   - Honor parallel jobs, fix from Borislav Petkov

   - Introduce tools/lib/lk library, initially just removing duplication
     among tools/perf and tools/vm.  from Borislav Petkov

  ... and many more I missed to list, see the shortlog and git log for
  more details."

* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (136 commits)
  perf/x86/intel/P4: Robistify P4 PMU types
  perf/x86/amd: Fix AMD NB and L2I "uncore" support
  perf/x86/amd: Remove old-style NB counter support from perf_event_amd.c
  perf/x86: Check all MSRs before passing hw check
  perf/x86/amd: Add support for AMD NB and L2I "uncore" counters
  perf/x86/intel: Add Ivy Bridge-EP uncore support
  perf/x86/intel: Fix SNB-EP CBO and PCU uncore PMU filter management
  perf/x86: Avoid kfree() in CPU_{STARTING,DYING}
  uprobes/perf: Avoid perf_trace_buf_prepare/submit if ->perf_events is empty
  uprobes/tracing: Don't pass addr=ip to perf_trace_buf_submit()
  uprobes/tracing: Change create_trace_uprobe() to support uretprobes
  uprobes/tracing: Make seq_printf() code uretprobe-friendly
  uprobes/tracing: Make register_uprobe_event() paths uretprobe-friendly
  uprobes/tracing: Make uprobe_{trace,perf}_print() uretprobe-friendly
  uprobes/tracing: Introduce is_ret_probe() and uretprobe_dispatcher()
  uprobes/tracing: Introduce uprobe_{trace,perf}_print() helpers
  uprobes/tracing: Generalize struct uprobe_trace_entry_head
  uprobes/tracing: Kill the pointless local_save_flags/preempt_count calls
  uprobes/tracing: Kill the pointless seq_print_ip_sym() call
  uprobes/tracing: Kill the pointless task_pt_regs() calls
  ...
2013-04-30 07:41:01 -07:00
Linus Torvalds
1f889ec62c Merge branch 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RCU updates from Ingo Molnar:
 "The main changes in this cycle are mostly related to preparatory work
  for the full-dynticks work:

   - Remove restrictions on no-CBs CPUs, make RCU_FAST_NO_HZ take
     advantage of numbered callbacks, do callback accelerations based on
     numbered callbacks.  Posted to LKML at
        https://lkml.org/lkml/2013/3/18/960

   - RCU documentation updates.  Posted to LKML at
        https://lkml.org/lkml/2013/3/18/570

   - Miscellaneous fixes.  Posted to LKML at
        https://lkml.org/lkml/2013/3/18/594"

* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
  rcu: Make rcu_accelerate_cbs() note need for future grace periods
  rcu: Abstract rcu_start_future_gp() from rcu_nocb_wait_gp()
  rcu: Rename n_nocb_gp_requests to need_future_gp
  rcu: Push lock release to rcu_start_gp()'s callers
  rcu: Repurpose no-CBs event tracing to future-GP events
  rcu: Rearrange locking in rcu_start_gp()
  rcu: Make RCU_FAST_NO_HZ take advantage of numbered callbacks
  rcu: Accelerate RCU callbacks at grace-period end
  rcu: Export RCU_FAST_NO_HZ parameters to sysfs
  rcu: Distinguish "rcuo" kthreads by RCU flavor
  rcu: Add event tracing for no-CBs CPUs' grace periods
  rcu: Add event tracing for no-CBs CPUs' callback registration
  rcu: Introduce proper blocking to no-CBs kthreads GP waits
  rcu: Provide compile-time control for no-CBs CPUs
  rcu: Tone down debugging during boot-up and shutdown.
  rcu: Add softirq-stall indications to stall-warning messages
  rcu: Documentation update
  rcu: Make bugginess of code sample more evident
  rcu: Fix hlist_bl_set_first_rcu() annotation
  rcu: Delete unused rcu_node "wakemask" field
  ...
2013-04-30 07:39:01 -07:00
Steven Rostedt
6c24499f40 tracing: Fix small merge bug
During the 3.10 merge, a conflict happened and the resolution was
almost, but not quite, correct. An if statement was reversed.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
[ Duh. That was just silly of me  - Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-30 07:23:08 -07:00
Linus Torvalds
500fcbc4a9 A bug was recently found in the make localmodconfig where it would miss
dependencies of config files are include in other config files inside
 an if statement.
 
 Also added a debug print that helped in solving this bug.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQEcBAABAgAGBQJRfwGyAAoJEOdOSU1xswtMsfIIAJAHT1Zvp25mcKB/eQb9aTsy
 bTJObwRPKovIIEXpHK4142/5Fn6okI9fGWTUfyMMCaxPdt82bn5IUMAeA7N35jEA
 gvVMtYlYGTblb6vG0xd1pVifihsl4iXfFsDDeAYWDOqmdoWGh14FUpyj2PoL3L5j
 RYNjsy54sV9+WuY4+BWd56s21IES7VRgSjYa8AAx9VBqxgxPggGqidHaP5QYK+ah
 NfIklYFBpdUMi+0hGRN8HrWlToA+1XKa6Acc3oq+0A8cAZFab9OMd+XvOJrBAl80
 kUSTY1Ga7MuccbwqLmRdUswjA+tWJ2EYdfS+Pf22UDqUgyGb93EAt7/eR6Ugexw=
 =YjLR
 -----END PGP SIGNATURE-----

Merge tag 'localmodconfig-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-kconfig

Pull localmodconfig changes from Steven Rostedt:
 "A bug was recently found in the make localmodconfig where it would
  miss dependencies of config files are include in other config files
  inside an if statement.

  Also added a debug print that helped in solving this bug."

* tag 'localmodconfig-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-kconfig:
  localmodconfig: Process source kconfig files as they are found
  localmodconfig: Add debug prints for dependencies of module configs
2013-04-30 07:20:33 -07:00
Mauro Carvalho Chehab
df90e22589 Merge branch 'devel-for-v3.10' into v4l_for_linus
* patchwork: (831 commits)
  [media] cx88: make core less verbose
  [media] em28xx: fix oops at em28xx_dvb_bus_ctrl()
  [media] s5c73m3: fix indentation of the help section in Kconfig
  [media] cx25821-alsa: get rid of a __must_check warning
  [media] cx25821-video: declare cx25821_vidioc_s_std as static
  [media] cx25821-video: remove maxw from cx25821_vidioc_try_fmt_vid_cap
  [media] r820t: Remove a warning for an unused value
  [media] dib0090: Fix a warning at dib0090_set_EFUSE
  [media] dib8000: fix a warning
  [media] dib8000: Fix sub-channel range
  [media] dib8000: store dtv_property_cache in a temp var
  [media] dib8000: warning fix: declare internal functions as static
  [media] r820t: quiet gcc warning on n_ring
  [media] r820t: memory leak in release()
  [media] r820t: precendence bug in r820t_xtal_check()
  [media] videodev2.h: Remove the unused old V4L1 buffer types
  [media] anysee: Grammar s/report the/report to/
  [media] anysee: Initialize ret = 0 in anysee_frontend_attach()
  [media] media: videobuf2: fix the length check for mmap
  [media] em28xx: save isoc endpoint number for DVB only if endpoint has alt settings with xMaxPacketSize != 0
  ...

Conflicts:
	drivers/media/pci/cx25821/cx25821-video.c
	drivers/media/platform/Kconfig
2013-04-30 09:01:04 -03:00
Mauro Carvalho Chehab
aad797c899 Linux 3.9
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iQEcBAABAgAGBQJRfcB+AAoJEHm+PkMAQRiGmLAH/0bIpdOYylJhRDmVOztXpANP
 jRYYH00UiSIBz8XO463dbbtevT2pB8pIw5TCxBWBi/V5rnJS9X5pvAHyNZBDUvYd
 3BQCQ2cnQ+6stFpi4o6NciZzQShDGMmUxAOD6ejZM35/P2l+ZKrNqBwy3R4oeMuZ
 /WUYZTCfFF3G7qgkHoOwIjM6c34v0tpqLfx4R5CdTnKe0Ow0OGb5ko5+lefD6i9m
 6cd2GFlWeIUvw0FSMLyB+HN6Tkf3JnwrklP+vuLNV+uOq5BLwggGc6A1eS51IuVJ
 e/ZkGTtirz+mZiG5lvqSXHaVEObPsbm32XfVVHp1SiE+TIugDb2uhtEQEv+a43w=
 =UOGY
 -----END PGP SIGNATURE-----

Merge tag 'v3.9' into v4l_for_linus

Linux 3.9

* tag 'v3.9': (1099 commits)
  Linux 3.9
  vm: add no-mmu vm_iomap_memory() stub
  efivars: only check for duplicates on the registered list
  TTY: fix atime/mtime regression
  aio: fix possible invalid memory access when DEBUG is enabled
  parisc: use spin_lock_irqsave/spin_unlock_irqrestore for PTE updates
  parisc: disable -mlong-calls compiler option for kernel modules
  parisc: uaccess: fix compiler warnings caused by __put_user casting
  parisc: Change kunmap macro to static inline function
  parisc: Provide __ucmpdi2 to resolve undefined references in 32 bit builds.
  sparc64: Fix missing put_cpu_var() in tlb_batch_add_one() when not batching.
  Revert "gpio: pxa: set initcall level to module init"
  efi: Check EFI revision in setup_efi_vars
  x86, efi: Fix a build warning
  Revert "MIPS: page.h: Provide more readable definition for PAGE_MASK."
  kernel/hz.bc: ignore.
  Linux 3.9-rc8
  events: Protect access via task_subsys_state_check()
  net: fix incorrect credentials passing
  x86, microcode: Verify the family before dispatching microcode patching
  ...
2013-04-30 09:00:33 -03:00
Matt Fleming
4ee39e979c efi, pstore: Initialise 'entry' before iterating
Seiji reports hitting the following crash when erasing pstore dump
variables,

  BUG: unable to handle kernel NULL pointer dereference at 0000000000000fa4
  IP: [<ffffffff8142dadf>] __efivar_entry_iter+0x2f/0x120
  PGD 18482a067 PUD 190724067 PMD 0
  Oops: 0000 [#1] SMP
  [...]
  Call Trace:
   [<ffffffff8143001f>] efi_pstore_erase+0xdf/0x130
   [<ffffffff81200038>] ? cap_socket_create+0x8/0x10
   [<ffffffff811ea491>] pstore_unlink+0x41/0x60
   [<ffffffff811741ff>] vfs_unlink+0x9f/0x110
   [<ffffffff8117813b>] do_unlinkat+0x18b/0x280
   [<ffffffff81178472>] sys_unlinkat+0x22/0x40
   [<ffffffff81542402>] system_call_fastpath+0x16/0x1b

'entry' needs to be initialised in efi_pstore_erase() when iterating
with __efivar_entry_iter(), otherwise the garbage pointer will be
dereferenced, leading to crashes like the above.

Reported-by: Seiji Aguchi <seiji.aguchi@hds.com>
Tested-by: Seiji Aguchi <seiji.aguchi@hds.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Matthew Garrett <matthew.garrett@nebula.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
2013-04-30 12:07:57 +01:00
Daniel Mack
d463f82d22 pinctrl: fix mutex deadlock in get_pinctrl_dev_from_of_node()
This obvious bug was introduced by d755910b7 ("pinctrl: move subsystem
mutex to pinctrl_dev struct").

Signed-off-by: Daniel Mack <zonque@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-30 13:02:04 +02:00
Jingoo Han
37e4901449 pinctrl: plgpio: add CONFIG_PM_SLEEP to suspend/resume functions
Add CONFIG_PM_SLEEP to suspend/resume functions to fix the following
build warning when CONFIG_PM_SLEEP is not selected. This is because
sleep PM callbacks defined by SIMPLE_DEV_PM_OPS are only used when
the CONFIG_PM_SLEEP is enabled.

drivers/pinctrl/spear/pinctrl-plgpio.c:645:12: warning: 'plgpio_suspend' defined but not used [-Wunused-function]
drivers/pinctrl/spear/pinctrl-plgpio.c:684:12: warning: 'plgpio_resume' defined but not used [-Wunused-function]

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-30 13:01:17 +02:00
Matt Fleming
a614e1923d Linux 3.9
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iQEcBAABAgAGBQJRfcB+AAoJEHm+PkMAQRiGmLAH/0bIpdOYylJhRDmVOztXpANP
 jRYYH00UiSIBz8XO463dbbtevT2pB8pIw5TCxBWBi/V5rnJS9X5pvAHyNZBDUvYd
 3BQCQ2cnQ+6stFpi4o6NciZzQShDGMmUxAOD6ejZM35/P2l+ZKrNqBwy3R4oeMuZ
 /WUYZTCfFF3G7qgkHoOwIjM6c34v0tpqLfx4R5CdTnKe0Ow0OGb5ko5+lefD6i9m
 6cd2GFlWeIUvw0FSMLyB+HN6Tkf3JnwrklP+vuLNV+uOq5BLwggGc6A1eS51IuVJ
 e/ZkGTtirz+mZiG5lvqSXHaVEObPsbm32XfVVHp1SiE+TIugDb2uhtEQEv+a43w=
 =UOGY
 -----END PGP SIGNATURE-----

Merge tag 'v3.9' into efi-for-tip2

Resolve conflicts for Ingo.

Conflicts:
	drivers/firmware/Kconfig
	drivers/firmware/efivars.c

Signed-off-by: Matt Fleming <matt.fleming@intel.com>
2013-04-30 11:42:13 +01:00
Jiri Kosina
ad1b890e06 Merge branches 'for-3.10/wiimote' and 'for-3.9/upstream-fixes' into for-linus 2013-04-30 10:19:21 +02:00
Jiri Kosina
047dff63f9 Merge branches 'for-3.10/multitouch', 'for-3.10/roccat' and 'for-3.10/upstream' into for-linus
Conflicts:
	drivers/hid/Kconfig
2013-04-30 10:19:07 +02:00
Jiri Kosina
72c16d9a5c Merge branch 'for-3.10/mt-hybrid-finger-pen' into for-linus
Conflicts:
	drivers/hid/hid-multitouch.c
2013-04-30 10:17:48 +02:00
Jiri Kosina
4f5a810429 Merge branches 'for-3.10/appleir', 'for-3.10/hid-debug', 'for-3.10/hid-driver-transport-cleanups', 'for-3.10/i2c-hid' and 'for-3.10/logitech' into for-linus 2013-04-30 10:12:44 +02:00
Jiri Kosina
2353f2bea3 HID: protect hid_debug_list
Accesses to hid_device->hid_debug_list are not serialized properly, which
could result in SMP concurrency issues when HID debugfs events are accessesed
by multiple userspace processess.

Serialize all the list operations by a mutex.

Spotted by Al Viro.

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-04-30 10:09:31 +02:00
Benjamin Tissoires
a5f04b9df1 HID: debug: break out hid_dump_report() into hid-debug
No semantic changes, but hid_dump_report should be in hid-debug.c, not
in hid-core.c

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-04-30 10:09:06 +02:00
David S. Miller
58717686cf Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts:
	drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
	drivers/net/ethernet/emulex/benet/be.h
	include/net/tcp.h
	net/mac802154/mac802154.h

Most conflicts were minor overlapping stuff.

The be2net driver brought in some fixes that added __vlan_put_tag
calls, which in net-next take an additional argument.

Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-30 03:55:20 -04:00
Aneesh Kumar K.V
1f6aaaccb1 powerpc: Update tlbie/tlbiel as per ISA doc
Encode the actual page correctly in tlbie/tlbiel. This make sure we handle
multiple page size segment correctly.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-04-30 16:00:29 +10:00
Aneesh Kumar K.V
3dc4feca4b powerpc: Print page size info during boot
This gives hint about different base and actual page size combination
supported by the platform.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-04-30 16:00:25 +10:00
Aneesh Kumar K.V
d8139ebf85 powerpc: print both base and actual page size on hash failure
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-04-30 16:00:22 +10:00
Aneesh Kumar K.V
7e74c3921a powerpc: Fix hpte_decode to use the correct decoding for page sizes
As per ISA doc, we encode base and actual page size in the LP bits of
PTE. The number of bit used to encode the page sizes depend on actual
page size.  ISA doc lists this as

   PTE LP     actual page size
rrrr rrrz 	>=8KB
rrrr rrzz	>=16KB
rrrr rzzz 	>=32KB
rrrr zzzz 	>=64KB
rrrz zzzz 	>=128KB
rrzz zzzz 	>=256KB
rzzz zzzz	>=512KB
zzzz zzzz 	>=1MB

ISA doc also says
"The values of the “z” bits used to specify each size, along with all possible
values of “r” bits in the LP field, must result in LP values distinct from
other LP values for other sizes."

based on the above update hpte_decode to use the correct decoding for LP bits.

Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-04-30 16:00:18 +10:00
Aneesh Kumar K.V
b1022fbd29 powerpc: Decode the pte-lp-encoding bits correctly.
We look at both the segment base page size and actual page size and store
the pte-lp-encodings in an array per base page size.

We also update all relevant functions to take actual page size argument
so that we can use the correct PTE LP encoding in HPTE. This should also
get the basic Multiple Page Size per Segment (MPSS) support. This is needed
to enable THP on ppc64.

[Fixed PR KVM build --BenH]

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Acked-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-04-30 16:00:14 +10:00
Aneesh Kumar K.V
74f227b228 powerpc: Use encode avpn where we need only avpn values
In all these cases we are doing something similar to

HPTE_V_COMPARE(hpte_v, want_v) which ignores the HPTE_V_LARGE bit

With MPSS support we would need actual page size to set HPTE_V_LARGE
bit and that won't be available in most of these cases. Since we are ignoring
HPTE_V_LARGE bit, use the  avpn value instead. There should not be any change
in behaviour after this patch.

Acked-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-04-30 16:00:11 +10:00
Aneesh Kumar K.V
5c1f6ee9a3 powerpc: Reduce PTE table memory wastage
We allocate one page for the last level of linux page table. With THP and
large page size of 16MB, that would mean we are wasting large part
of that page. To map 16MB area, we only need a PTE space of 2K with 64K
page size. This patch reduce the space wastage by sharing the page
allocated for the last level of linux page table with multiple pmd
entries. We call these smaller chunks PTE page fragments and allocated
page, PTE page.

In order to support systems which doesn't have 64K HPTE support, we also
add another 2K to PTE page fragment. The second half of the PTE fragments
is used for storing slot and secondary bit information of an HPTE. With this
we now have a 4K PTE fragment.

We use a simple approach to share the PTE page. On allocation, we bump the
PTE page refcount to 16 and share the PTE page with the next 16 pte alloc
request. This should help in the node locality of the PTE page fragment,
assuming that the immediate pte alloc request will mostly come from the
same NUMA node. We don't try to reuse the freed PTE page fragment. Hence
we could be waisting some space.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Acked-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-04-30 16:00:07 +10:00
Aneesh Kumar K.V
d614bb0412 powerpc: Move the pte free routines from common header
Acked-by: Paul Mackerras <paulus@samba.org>

This patch moves the common code to 32/64 bit headers and also duplicate
4K_PAGES and 64K_PAGES section. We will later change the 64 bit 64K_PAGES
version to support smaller PTE fragments. The patch doesn't introduce
any functional changes.

Acked-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-04-30 16:00:04 +10:00
Aneesh Kumar K.V
419df06eea powerpc: Reduce the PTE_INDEX_SIZE
This make one PMD cover 16MB range. That helps in easier implementation of THP
on power. THP core code make use of one pmd entry to track the hugepage and
the range mapped by a single pmd entry should be equal to the hugepage size
supported by the hardware.

This also switch PGD to cover 16GB. That is needed so that we can simplify the
hugetlb page walking code so that we have same pte format for explicit hugepage
and THP hugepage.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Acked-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-04-30 16:00:00 +10:00
Aneesh Kumar K.V
e2b3d202d1 powerpc: Switch 16GB and 16MB explicit hugepages to a different page table format
We will be switching PMD_SHIFT to 24 bits to facilitate THP impmenetation.
With PMD_SHIFT set to 24, we now have 16MB huge pages allocated at PGD level.
That means with 32 bit process we cannot allocate normal pages at
all, because we cover the entire address space with one pgd entry. Fix this
by switching to a new page table format for hugepages. With the new page table
format for 16GB and 16MB hugepages we won't allocate hugepage directory. Instead
we encode the PTE information directly at the directory level. This forces 16MB
hugepage at PMD level. This will also make the page take walk much simpler later
when we add the THP support.

With the new table format we have 4 cases for pgds and pmds:
(1) invalid (all zeroes)
(2) pointer to next table, as normal; bottom 6 bits == 0
(3) leaf pte for huge page, bottom two bits != 00
(4) hugepd pointer, bottom two bits == 00, next 4 bits indicate size of table

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Acked-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-04-30 15:59:56 +10:00
Aneesh Kumar K.V
cf9427b85e powerpc: New hugepage directory format
Change the hugepage directory format so that we can have leaf ptes directly
at page directory avoiding the allocation of hugepage directory.

With the new table format we have 3 cases for pgds and pmds:
(1) invalid (all zeroes)
(2) pointer to next table, as normal; bottom 6 bits == 0
(4) hugepd pointer, bottom two bits == 00, next 4 bits indicate size of table

Instead of storing shift value in hugepd pointer we use mmu_psize_def index
so that we can fit all the supported hugepage size in 4 bits

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Acked-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-04-30 15:59:53 +10:00
Aneesh Kumar K.V
0e5f35d0e4 powerpc: Don't truncate pgd_index wrongly
With PGD_INDEX_SIZE set to 12 the existing macro doesn't work. Fix it to
use PTRS_PER_PGD

The idea originally was to have one more bit in the result of
pgd_index() than PGD_INDEX_SIZE, so that if one had an address
corresponding to the last PGD entry, and then incremented that address
by PGD_SIZE, and took pgd_index() of that, you wouldn't end up with
zero.  The commit that introduced that dates back to 2002, and the
code that was sensitive to that edge case has long since been
refactored (several times), so there is no need for it these days.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Acked-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-04-30 15:59:49 +10:00
Aneesh Kumar K.V
cc3665a60a powerpc: Don't hard code the size of pte page
USE PTRS_PER_PTE to indicate the size of pte page. To support THP,
later patches will be changing PTRS_PER_PTE value.

Acked-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-04-30 15:59:46 +10:00
Aneesh Kumar K.V
ce54152f42 powerpc: Save DAR and DSISR in pt_regs on MCE
We were not saving DAR and DSISR on MCE. Save then and also print the values
along with exception details in xmon.

Acked-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-04-30 15:59:42 +10:00
Aneesh Kumar K.V
4b8f63d92e powerpc: Use signed formatting when printing error
PAPR defines these errors as negative values. So print them accordingly
for easy debugging.

Acked-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-04-30 15:59:39 +10:00
Nathan Fontenot
601abdc3b4 powerpc/pseries: Correct builds break when CONFIG_SMP not defined
Correct build failure for powerpc/pseries builds with CONFIG_SMP not defined.

The function cpu_sibling_mask has no meaning (or definition) when CONFIG_SMP
is not defined. Additionally, the updating of NUMA affinity for a CPU in a UP
system doesn't really make sense.

This patch ifdef's out the code making the affinity updates for PRRN events to
fix the following build break.

arch/powerpc/mm/numa.c: In function ‘stage_topology_update’:
arch/powerpc/mm/numa.c:1535: error: implicit declaration of function ‘cpu_sibling_mask’
arch/powerpc/mm/numa.c:1535: warning: passing argument 3 of ‘cpumask_or’ makes pointer from integer without a cast
make[1]: *** [arch/powerpc/mm/numa.o] Error 1

Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-04-30 15:59:35 +10:00
Kevin Hao
177c19237b powerpc/booke: Remove obsolete macro FINISH_EXCEPTION
This is stale and not used by anyone now.

Signed-off-by: Kevin Hao <haokexin@gmail.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-04-30 15:59:32 +10:00
Vasant Hegde
fb4696c395 powerpc/rtas_flash: Fix bad memory access
We use kmem_cache_alloc() to allocate memory to hold the new firmware
which will be flashed. kmem_cache_alloc() calls rtas_block_ctor() to
set memory to NULL. But these constructor is called only for newly
allocated slabs.

If we run below command multiple time without rebooting, allocator may
allocate memory from the area which was free'd by kmem_cache_free and
it will not call constructor. In this situation we may hit kernel oops.

dd if=<fw image> of=/proc/ppc64/rtas/firmware_flash bs=4096

oops message:
-------------
[ 1602.399755] Oops: Kernel access of bad area, sig: 11 [#1]
[ 1602.399772] SMP NR_CPUS=1024 NUMA pSeries
[ 1602.399779] Modules linked in: rtas_flash nfsd lockd auth_rpcgss nfs_acl sunrpc fuse loop dm_mod sg ipv6 ses enclosure ehea ehci_pci ohci_hcd ehci_hcd usbcore sd_mod usb_common crc_t10dif scsi_dh_alua scsi_dh_emc scsi_dh_hp_sw scsi_dh_rdac scsi_dh ipr libata scsi_mod
[ 1602.399817] NIP: d00000000a170b9c LR: d00000000a170b64 CTR: c00000000079cd58
[ 1602.399823] REGS: c0000003b9937930 TRAP: 0300   Not tainted  (3.9.0-rc4-0.27-ppc64)
[ 1602.399828] MSR: 8000000000009032 <SF,EE,ME,IR,DR,RI>  CR: 22000428  XER: 20000000
[ 1602.399841] SOFTE: 1
[ 1602.399844] CFAR: c000000000005f24
[ 1602.399848] DAR: 8c2625a820631fef, DSISR: 40000000
[ 1602.399852] TASK = c0000003b4520760[3655] 'dd' THREAD: c0000003b9934000 CPU: 3
GPR00: 8c2625a820631fe7 c0000003b9937bb0 d00000000a179f28 d00000000a171f08
GPR04: 0000000010040000 0000000000001000 c0000003b9937df0 c0000003b5fb2080
GPR08: c0000003b58f7200 d00000000a179f28 c0000003b40058d4 c00000000079cd58
GPR12: d00000000a171450 c000000007f40900 0000000000000005 0000000010178d20
GPR16: 00000000100cb9d8 000000000000001d 0000000000000000 000000001003ffff
GPR20: 0000000000000001 0000000000000000 00003fffa0b50d30 000000001001f010
GPR24: 0000000010020888 0000000010040000 d00000000a171f08 d00000000a172808
GPR28: 0000000000001000 0000000010040000 c0000003b4005880 8c2625a820631fe7
[ 1602.399924] NIP [d00000000a170b9c] .rtas_flash_write+0x7c/0x1e8 [rtas_flash]
[ 1602.399930] LR [d00000000a170b64] .rtas_flash_write+0x44/0x1e8 [rtas_flash]
[ 1602.399934] Call Trace:
[ 1602.399939] [c0000003b9937bb0] [d00000000a170b64] .rtas_flash_write+0x44/0x1e8 [rtas_flash] (unreliable)
[ 1602.399948] [c0000003b9937c60] [c000000000282830] .proc_reg_write+0x90/0xe0
[ 1602.399955] [c0000003b9937ce0] [c0000000001ff374] .vfs_write+0x114/0x238
[ 1602.399961] [c0000003b9937d80] [c0000000001ff5d8] .SyS_write+0x70/0xe8
[ 1602.399968] [c0000003b9937e30] [c000000000009cdc] syscall_exit+0x0/0xa0
[ 1602.399973] Instruction dump:
[ 1602.399977] eb698010 801b0028 2f80dcd6 419e00a4 2fbc0000 419e009c ebfb0030 2fbf0000
[ 1602.399989] 409e0010 480000d8 60000000 7c1f0378 <e81f0008> 2fa00000 409efff4 e81f0000
[ 1602.400012] ---[ end trace b4136d115dc31dac ]---
[ 1602.402178]
[ 1602.402185] Sending IPI to other CPUs
[ 1602.403329] IPI complete

This patch uses kmem_cache_zalloc() instead of kmem_cache_alloc() to
allocate memory, which makes sure memory is set to 0 before using.
Also removes rtas_block_ctor(), which is no longer required.

Signed-off-by: Vasant Hegde <hegdevasant@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-04-30 15:59:28 +10:00
Stephen Rothwell
9f3a90e89d powerpc: Fix build failure after merge of the cgroup tree
After merging the cgroup tree, today's linux-next build (powerpc
ppc64_defconfig) failed like this:

arch/powerpc/mm/numa.c: In function 'arch_update_cpu_topology':
arch/powerpc/mm/numa.c:1465:2: error: implicit declaration of function 'kzalloc' [-Werror=implicit-function-declaration]
arch/powerpc/mm/numa.c:1465:10: error: assignment makes pointer from integer without a cast [-Werror]
arch/powerpc/mm/numa.c:1497:2: error: implicit declaration of function 'kfree' [-Werror=implicit-function-declaration]

Caused by commit 30c05350c3 ("powerpc/pseries: Use stop machine to
update cpu maps") from the powerpc tree interacting with (probably)
commit ff794dea52 ("cpuset: remove include of cgroup.h from cpuset.h")
from the cgroup tree.  Removing includes from header files is fraught
with danger ...

The former should have added an include of linux/slab.h to
arch/powerpc/mm/numa.c.

I have added the following merge fix patch for today (but it should be
applied to the powerpc tree ASAP).

From: Stephen Rothwell <sfr@canb.auug.org.au>
Date: Mon, 29 Apr 2013 14:01:44 +1000
Subject: [PATCH] powerpc: numa.c: using kzalloc/kfree requires including
 slab.h

fixes these build errors:

arch/powerpc/mm/numa.c: In function 'arch_update_cpu_topology':
arch/powerpc/mm/numa.c:1465:2: error: implicit declaration of function 'kzalloc' [-Werror=implicit-function-declaration]
arch/powerpc/mm/numa.c:1465:10: error: assignment makes pointer from integer without a cast [-Werror]
arch/powerpc/mm/numa.c:1497:2: error: implicit declaration of function 'kfree' [-Werror=implicit-function-declaration]

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-04-30 15:59:24 +10:00
Michael Neuling
d5bbe6596a powerpc: Fix usage of setup_pci_atmu()
Linux next is currently failing to compile mpc85xx_defconfig with:
  arch/powerpc/sysdev/fsl_pci.c:944:2: error: too many arguments to function 'setup_pci_atmu'

This is caused by (from Kumar's next branch):
  commit 34642bbb3d
  Author: Kumar Gala <galak@kernel.crashing.org>
  powerpc/fsl-pci: Keep PCI SoC controller registers in pci_controller

Which changed definition of setup_pci_atmu() but didn't update one of
the callers.  Below fixes this.

Signed-off-by: Michael Neuling <mikey@neuling.org>
Reviewed-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-04-30 15:15:12 +10:00
Shaohua Li
32f9f570d0 MD: ignore discard request for hard disks of hybid raid1/raid10 array
In SSD/hard disk hybid storage, discard request should be ignored for hard
disk. We used to be doing this way, but the unplug path forgets it.

This is suitable for stable tree since v3.6.

Cc: stable@vger.kernel.org
Reported-and-tested-by: Markus <M4rkusXXL@web.de>
Signed-off-by: Shaohua Li <shli@fusionio.com>
Signed-off-by: NeilBrown <neilb@suse.de>
2013-04-30 14:49:36 +10:00
NeilBrown
486adf72cc md: bad block list should default to disabled.
Maintenance of a bad-block-list currently defaults to 'enabled'
and is then disabled when it cannot be supported.
This is backwards and causes problem for dm-raid which didn't know
to disable it.

So fix the defaults, and only enabled for v1.x metadata which
explicitly has bad blocks enabled.

The problem with dm-raid has been present since badblock support was
added in v3.1, so this patch is suitable for any -stable from 3.1
onwards.

Cc: stable@vger.kernel.org (3.1+)
Reported-by: Jonathan Brassow <jbrassow@redhat.com>
Signed-off-by: NeilBrown <neilb@suse.de>
2013-04-30 14:49:32 +10:00
Hirokazu Takahashi
0fea7ed82b md: raid1/raid10 md devices leak memory when stopping
Hi.

Raid1 and raid10 devices leak memory every time they stop.
This is a patch for linux-3.9.0-rc7 to fix this problem.

Thanks,
Hirokazu Takahashi.

Signed-off-by: Hirokazu Takahashi <taka@valinux.co.jp>
Signed-off-by: NeilBrown <neilb@suse.de>
2013-04-30 14:49:26 +10:00
Benjamin Poirier
79f632c71b unix/stream: fix peeking with an offset larger than data in queue
Currently, peeking on a unix stream socket with an offset larger than len of
the data in the sk receive queue returns immediately with bogus data.

This patch fixes this so that the behavior is the same as peeking with no
offset on an empty queue: the caller blocks.

Signed-off-by: Benjamin Poirier <bpoirier@suse.de>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-30 00:43:54 -04:00
Benjamin Poirier
39cc86130b unix/dgram: fix peeking with an offset larger than data in queue
Currently, peeking on a unix datagram socket with an offset larger than len of
the data in the sk receive queue returns immediately with bogus data. That's
because *off is not reset between each skb_queue_walk().

This patch fixes this so that the behavior is the same as peeking with no
offset on an empty queue: the caller blocks.

Signed-off-by: Benjamin Poirier <bpoirier@suse.de>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-30 00:43:54 -04:00
Benjamin Poirier
add05ad4e9 unix/dgram: peek beyond 0-sized skbs
"77c1090 net: fix infinite loop in __skb_recv_datagram()" (v3.8) introduced a
regression:
After that commit, recv can no longer peek beyond a 0-sized skb in the queue.
__skb_recv_datagram() instead stops at the first skb with len == 0 and results
in the system call failing with -EFAULT via skb_copy_datagram_iovec().

When peeking at an offset with 0-sized skb(s), each one of those is received
only once, in sequence. The offset starts moving forward again after receiving
datagrams with len > 0.

Signed-off-by: Benjamin Poirier <bpoirier@suse.de>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-30 00:43:54 -04:00
Thomas Graf
cff63a5292 openvswitch: Remove unneeded ovs_netdev_get_ifindex()
The only user is get_dpifindex(), no need to redirect via the port
operations.

Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-30 00:19:11 -04:00
Sridhar Samudrala
0c772159d1 net: Use consume_skb() to free gso segmented skb
Use consume_skb() to free the original skb that is successfully transmitted
as gso segmented skbs so that it is not treated as a drop due to an error.

Signed-off-by: Sridhar Samudrala <sri@us.ibm.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-30 00:18:13 -04:00
David S. Miller
1ab137bc99 Merge branch 'for-davem' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next
John W. Linville says:

====================
A few more stragglers intended for 3.10...

For the Bluetooth bits, Gustavo says:

"A few more patches intended for 3.10, the most important one is the support in
btusb for fw loading for the Intel Bluetooth device. Other than that we have
only fixes and clean ups."

For the iwlwifi bits, Johannes says:

"Here are a few more changes for the 3.10 stream, some bugfixes,
adjustments to some powersave parameters and a new device ID."

For the NFC bits, Samuel says:

"This pull request includes Marcel's Kconfig dependency fix on top of the LLCP
code move to net/nfc."

On top of that...Yogesh Ashok Powar provides a few PCI-related mwifiex
updates, Hauke Mehrtens provides a small ssb feature for spurious
tone avoidance on a specific chip, and Larry Finger provides a small
rtlwifi fix related to avoiding false detection of AP loss.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-30 00:11:37 -04:00