Used Avago MGA-81563 RF amplifier could be destroyed pretty easily
with too strong signal or transmitting to bad antenna.
Add module parameter 'enable_rf_gain_ctrl' which allows enabling
RF gain control - otherwise, default without the module parameter,
RF gain control is set to 'grabbed' state which prevents setting
value to the control.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
drivers/media/usb/hackrf/hackrf.c:1533 hackrf_probe()
error: we previously assumed 'dev' could be null (see line 1366)
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
When allocating a pciback device fails, clear the private
field. This could lead to an use-after free, however
the 'really_probe' takes care of setting
dev_set_drvdata(dev, NULL) in its failure path (which we would
exercise if the ->probe function failed), so we we
are OK. However lets be defensive as the code can change.
Going forward we should clean up the pci_set_drvdata(dev, NULL)
in the various code-base. That will be for another day.
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Reported-by: Jonathan Creekmore <jonathan.creekmore@gmail.com>
Signed-off-by: Doug Goldstein <cardoe@cardoe.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
If CONFIG_BITREVERSE is not built-in, the sht15 driver fails to link:
drivers/built-in.o: In function `sht15_crc8':
drivers/hwmon/sht15.c:195: undefined reference to `byte_rev_table'
This adds a Kconfig 'select' statement, like all other users of
bitrev.h have it.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 33836ee985 ("hwmon:change sht15_reverse()")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
After several open/close sai test with ctrl+c, there will be
I/O error. The SAI can't work anymore, can't recover. There
will be no frame clock. With adding the software reset in
trigger stop, the issue can be fixed.
This is a hardware bug/errata and reset is the only option.
According to the reference manual, the software reset doesn't
reset any control register but only internal hardware logics
such as bit clock generator, status flags, and FIFO pointers.
(Our purpose is just to reset the clock generator while the
software reset is the only way to do that.)
Since slave mode doesn't use the clock generator, only apply
the reset procedure to the master mode.
For asynchronous mode, TX will not be reset when RX is still
running. In this case, i can't reproduce this issue.
Signed-off-by: Zidan Wang <zidan.wang@freescale.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
commit f598282f51 ("PCI: Fix the NIU MSI-X problem in a better way")
teaches us that dealing with MSI-X can be troublesome.
Further checks in the MSI-X architecture shows that if the
PCI_COMMAND_MEMORY bit is turned of in the PCI_COMMAND we
may not be able to access the BAR (since they are memory regions).
Since the MSI-X tables are located in there.. that can lead
to us causing PCIe errors. Inhibit us performing any
operation on the MSI-X unless the MEMORY bit is set.
Note that Xen hypervisor with:
"x86/MSI-X: access MSI-X table only after having enabled MSI-X"
will return:
xen_pciback: 0000:0a:00.1: error -6 enabling MSI-X for guest 3!
When the generic MSI code tries to setup the PIRQ without
MEMORY bit set. Which means with later versions of Xen
(4.6) this patch is not neccessary.
This is part of XSA-157
CC: stable@vger.kernel.org
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Otherwise just continue on, returning the same values as
previously (return of 0, and op->result has the PIRQ value).
This does not change the behavior of XEN_PCI_OP_disable_msi[|x].
The pci_disable_msi or pci_disable_msix have the checks for
msi_enabled or msix_enabled so they will error out immediately.
However the guest can still call these operations and cause
us to disable the 'ack_intr'. That means the backend IRQ handler
for the legacy interrupt will not respond to interrupts anymore.
This will lead to (if the device is causing an interrupt storm)
for the Linux generic code to disable the interrupt line.
Naturally this will only happen if the device in question
is plugged in on the motherboard on shared level interrupt GSI.
This is part of XSA-157
CC: stable@vger.kernel.org
Reviewed-by: David Vrabel <david.vrabel@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Otherwise an guest can subvert the generic MSI code to trigger
an BUG_ON condition during MSI interrupt freeing:
for (i = 0; i < entry->nvec_used; i++)
BUG_ON(irq_has_action(entry->irq + i));
Xen PCI backed installs an IRQ handler (request_irq) for
the dev->irq whenever the guest writes PCI_COMMAND_MEMORY
(or PCI_COMMAND_IO) to the PCI_COMMAND register. This is
done in case the device has legacy interrupts the GSI line
is shared by the backend devices.
To subvert the backend the guest needs to make the backend
to change the dev->irq from the GSI to the MSI interrupt line,
make the backend allocate an interrupt handler, and then command
the backend to free the MSI interrupt and hit the BUG_ON.
Since the backend only calls 'request_irq' when the guest
writes to the PCI_COMMAND register the guest needs to call
XEN_PCI_OP_enable_msi before any other operation. This will
cause the generic MSI code to setup an MSI entry and
populate dev->irq with the new PIRQ value.
Then the guest can write to PCI_COMMAND PCI_COMMAND_MEMORY
and cause the backend to setup an IRQ handler for dev->irq
(which instead of the GSI value has the MSI pirq). See
'xen_pcibk_control_isr'.
Then the guest disables the MSI: XEN_PCI_OP_disable_msi
which ends up triggering the BUG_ON condition in 'free_msi_irqs'
as there is an IRQ handler for the entry->irq (dev->irq).
Note that this cannot be done using MSI-X as the generic
code does not over-write dev->irq with the MSI-X PIRQ values.
The patch inhibits setting up the IRQ handler if MSI or
MSI-X (for symmetry reasons) code had been called successfully.
P.S.
Xen PCIBack when it sets up the device for the guest consumption
ends up writting 0 to the PCI_COMMAND (see xen_pcibk_reset_device).
XSA-120 addendum patch removed that - however when upstreaming said
addendum we found that it caused issues with qemu upstream. That
has now been fixed in qemu upstream.
This is part of XSA-157
CC: stable@vger.kernel.org
Reviewed-by: David Vrabel <david.vrabel@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
The guest sequence of:
a) XEN_PCI_OP_enable_msix
b) XEN_PCI_OP_enable_msix
results in hitting an NULL pointer due to using freed pointers.
The device passed in the guest MUST have MSI-X capability.
The a) constructs and SysFS representation of MSI and MSI groups.
The b) adds a second set of them but adding in to SysFS fails (duplicate entry).
'populate_msi_sysfs' frees the newly allocated msi_irq_groups (note that
in a) pdev->msi_irq_groups is still set) and also free's ALL of the
MSI-X entries of the device (the ones allocated in step a) and b)).
The unwind code: 'free_msi_irqs' deletes all the entries and tries to
delete the pdev->msi_irq_groups (which hasn't been set to NULL).
However the pointers in the SysFS are already freed and we hit an
NULL pointer further on when 'strlen' is attempted on a freed pointer.
The patch adds a simple check in the XEN_PCI_OP_enable_msix to guard
against that. The check for msi_enabled is not stricly neccessary.
This is part of XSA-157
CC: stable@vger.kernel.org
Reviewed-by: David Vrabel <david.vrabel@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
The guest sequence of:
a) XEN_PCI_OP_enable_msi
b) XEN_PCI_OP_enable_msi
c) XEN_PCI_OP_disable_msi
results in hitting an BUG_ON condition in the msi.c code.
The MSI code uses an dev->msi_list to which it adds MSI entries.
Under the above conditions an BUG_ON() can be hit. The device
passed in the guest MUST have MSI capability.
The a) adds the entry to the dev->msi_list and sets msi_enabled.
The b) adds a second entry but adding in to SysFS fails (duplicate entry)
and deletes all of the entries from msi_list and returns (with msi_enabled
is still set). c) pci_disable_msi passes the msi_enabled checks and hits:
BUG_ON(list_empty(dev_to_msi_list(&dev->dev)));
and blows up.
The patch adds a simple check in the XEN_PCI_OP_enable_msi to guard
against that. The check for msix_enabled is not stricly neccessary.
This is part of XSA-157.
CC: stable@vger.kernel.org
Reviewed-by: David Vrabel <david.vrabel@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Double fetch vulnerabilities that happen when a variable is
fetched twice from shared memory but a security check is only
performed the first time.
The xen_pcibk_do_op function performs a switch statements on the op->cmd
value which is stored in shared memory. Interestingly this can result
in a double fetch vulnerability depending on the performed compiler
optimization.
This patch fixes it by saving the xen_pci_op command before
processing it. We also use 'barrier' to make sure that the
compiler does not perform any optimization.
This is part of XSA155.
CC: stable@vger.kernel.org
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Jan Beulich <JBeulich@suse.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
The copy of the ring request was lacking a following barrier(),
potentially allowing the compiler to optimize the copy away.
Use RING_COPY_REQUEST() to ensure the request is copied to local
memory.
This is part of XSA155.
CC: stable@vger.kernel.org
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Since indirect descriptors are in memory shared with the frontend, the
frontend could alter the first_sect and last_sect values after they have
been validated but before they are recorded in the request. This may
result in I/O requests that overflow the foreign page, possibly
overwriting local pages when the I/O request is executed.
When parsing indirect descriptors, only read first_sect and last_sect
once.
This is part of XSA155.
CC: stable@vger.kernel.org
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
A compiler may load a switch statement value multiple times, which could
be bad when the value is in memory shared with the frontend.
When converting a non-native request to a native one, ensure that
src->operation is only loaded once by using READ_ONCE().
This is part of XSA155.
CC: stable@vger.kernel.org
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Instead of open-coding memcpy()s and directly accessing Tx and Rx
requests, use the new RING_COPY_REQUEST() that ensures the local copy
is correct.
This is more than is strictly necessary for guest Rx requests since
only the id and gref fields are used and it is harmless if the
frontend modifies these.
This is part of XSA155.
CC: stable@vger.kernel.org
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
The last from guest transmitted request gives no indication about the
minimum amount of credit that the guest might need to send a packet
since the last packet might have been a small one.
Instead allow for the worst case 128 KiB packet.
This is part of XSA155.
CC: stable@vger.kernel.org
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Using RING_GET_REQUEST() on a shared ring is easy to use incorrectly
(i.e., by not considering that the other end may alter the data in the
shared ring while it is being inspected). Safe usage of a request
generally requires taking a local copy.
Provide a RING_COPY_REQUEST() macro to use instead of
RING_GET_REQUEST() and an open-coded memcpy(). This takes care of
ensuring that the copy is done correctly regardless of any possible
compiler optimizations.
Use a volatile source to prevent the compiler from reordering or
omitting the copy.
This is part of XSA155.
CC: stable@vger.kernel.org
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
one nft userspace test case fails with
'ct l3proto original ipv4' mismatches 'ct l3proto ipv4'
... because NFTA_CT_DIRECTION attr is missing.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The print_insn() function returns strings like "lghi %r1,0". To escape the
'%' character in sprintf() a second '%' is used. For example "lghi %%r1,0"
is converted into "lghi %r1,0".
After print_insn() the output string is passed to printk(). Because format
specifiers like "%r" or "%f" are ignored by printk() this works by chance
most of the time. But for instructions with control registers like
"lctl %c6,%c6,780" this fails because printk() interprets "%c" as
character format specifier.
Fix this problem and escape the '%' characters twice.
For example "lctl %%%%c6,%%%%c6,780" is then converted by sprintf()
into "lctl %%c6,%%c6,780" and by printk() into "lctl %c6,%c6,780".
Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Cc: stable@vger.kernel.org
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Commit 25642e1459 ("powerpc/opal-irqchip: Fix double endian
conversion") fixed an endian bug by calling opal_handle_events() in
opal_event_unmask().
However this introduced a deadlock if we find an event is active
during unmasking and call opal_handle_events() again. The bad call
sequence is:
opal_interrupt()
-> opal_handle_events()
-> generic_handle_irq()
-> handle_level_irq()
-> raw_spin_lock(&desc->lock)
handle_irq_event(desc)
unmask_irq(desc)
-> opal_event_unmask()
-> opal_handle_events()
-> generic_handle_irq()
-> handle_level_irq()
-> raw_spin_lock(&desc->lock) (BOOM)
When generating multiple opal events in quick succession this would lead
to the following stall warnings:
EEH: Fenced PHB#0 detected, location: U78C9.001.WZS09XA-P1-C32
INFO: rcu_sched detected stalls on CPUs/tasks:
12-...: (1 GPs behind) idle=68f/140000000000001/0 softirq=860/861 fqs=2065
15-...: (1 GPs behind) idle=be5/140000000000001/0 softirq=1142/1143 fqs=2065
(detected by 13, t=2102 jiffies, g=1325, c=1324, q=602)
NMI watchdog: BUG: soft lockup - CPU#18 stuck for 22s! [irqbalance:2696]
INFO: rcu_sched detected stalls on CPUs/tasks:
12-...: (1 GPs behind) idle=68f/140000000000001/0 softirq=860/861 fqs=8371
15-...: (1 GPs behind) idle=be5/140000000000001/0 softirq=1142/1143 fqs=8371
(detected by 20, t=8407 jiffies, g=1325, c=1324, q=1290)
This patch corrects the problem by queuing the work if an event is
active during unmasking, which is similar to the pre-endian fix
behaviour.
Fixes: 25642e1459 ("powerpc/opal-irqchip: Fix double endian conversion")
Signed-off-by: Alistair Popple <alistair@popple.id.au>
Reported-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
User visible:
- Generate perf.data files from 'perf stat', to tap into the scripting
capabilities perf has instead of defining a 'perf stat' specific scripting
support to calculate event ratios, etc. Simple example:
$ perf stat record -e cycles usleep 1
Performance counter stats for 'usleep 1':
1,134,996 cycles
0.000670644 seconds time elapsed
$ perf stat report
Performance counter stats for '/home/acme/bin/perf stat record -e cycles usleep 1':
1,134,996 cycles
0.000670644 seconds time elapsed
$
It generates PERF_RECORD_ userspace records to store the details:
$ perf report -D | grep PERF_RECORD
0xf0 [0x28]: PERF_RECORD_THREAD_MAP nr: 1 thread: 27637
0x118 [0x12]: PERF_RECORD_CPU_MAP nr: 1 cpu: 65535
0x12a [0x40]: PERF_RECORD_STAT_CONFIG
0x16a [0x30]: PERF_RECORD_STAT
-1 -1 0x19a [0x40]: PERF_RECORD_MMAP -1/0: [0xffffffff81000000(0x1f000000) @ 0xffffffff81000000]: x [kernel.kallsyms]_text
0x1da [0x18]: PERF_RECORD_STAT_ROUND
[acme@ssdandy linux]$
An effort was made to make perf.data files generated like this to not
generate cryptic messages when processed by older tools.
The 'perf script' bits need rebasing, will go up later.
Jiri's cover letter for this series:
The initial attempt defined its own formula lang and allowed triggering user's
script on the end of the stat command:
http://marc.info/?l=linux-kernel&m=136742146322273&w=2
This patchset abandons the idea of new formula language and rather adds support
to:
- store stat data into perf.data file
- add python support to process stat events
Basically it allows to store stat data into perf.data and post process it with
python scripts in a similar way we do for sampling data.
The stat data are stored in new stat, stat-round, stat-config user events.
stat - stored for each read syscall of the counter
stat round - stored for each interval or end of the command invocation
stat config - stores all the config information needed to process data
so report tool could restore the same output as record
The python script can now define 'stat__<eventname>_<modifier>' functions
to get stat events data and 'stat__interval' to get stat-round data.
See CPI script example in scripts/python/stat-cpi.py.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=qwUx
-----END PGP SIGNATURE-----
Merge tag 'perf-core-for-mingo-3' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core
Pull new perf tool feature from Arnaldo Carvalho de Melo:
" User visible changes:
- Generate perf.data files from 'perf stat', to tap into the scripting
capabilities perf has instead of defining a 'perf stat' specific scripting
support to calculate event ratios, etc. Simple example:
$ perf stat record -e cycles usleep 1
Performance counter stats for 'usleep 1':
1,134,996 cycles
0.000670644 seconds time elapsed
$ perf stat report
Performance counter stats for '/home/acme/bin/perf stat record -e cycles usleep 1':
1,134,996 cycles
0.000670644 seconds time elapsed
$
It generates PERF_RECORD_ userspace records to store the details:
$ perf report -D | grep PERF_RECORD
0xf0 [0x28]: PERF_RECORD_THREAD_MAP nr: 1 thread: 27637
0x118 [0x12]: PERF_RECORD_CPU_MAP nr: 1 cpu: 65535
0x12a [0x40]: PERF_RECORD_STAT_CONFIG
0x16a [0x30]: PERF_RECORD_STAT
-1 -1 0x19a [0x40]: PERF_RECORD_MMAP -1/0: [0xffffffff81000000(0x1f000000) @ 0xffffffff81000000]: x [kernel.kallsyms]_text
0x1da [0x18]: PERF_RECORD_STAT_ROUND
[acme@ssdandy linux]$
An effort was made to make perf.data files generated like this to not
generate cryptic messages when processed by older tools.
The 'perf script' bits need rebasing, will go up later.
Jiri's cover letter for this series:
The initial attempt defined its own formula lang and allowed triggering user's
script on the end of the stat command:
http://marc.info/?l=linux-kernel&m=136742146322273&w=2
This patchset abandons the idea of new formula language and rather adds support
to:
- store stat data into perf.data file
- add python support to process stat events
Basically it allows to store stat data into perf.data and post process it with
python scripts in a similar way we do for sampling data.
The stat data are stored in new stat, stat-round, stat-config user events.
stat - stored for each read syscall of the counter
stat round - stored for each interval or end of the command invocation
stat config - stores all the config information needed to process data
so report tool could restore the same output as record
The python script can now define 'stat__<eventname>_<modifier>' functions
to get stat events data and 'stat__interval' to get stat-round data.
See CPI script example in scripts/python/stat-cpi.py."
Also a few other changes:
User visible changes:
- Make command line options always available, even when they
depend on some feature being enabled, warning the user about
use of such options (Wang Nan)
- Support --vmlinux in perf record, useful, so far, for eBPF,
where we will set up events that will be used in the record
session (He Kuang)
- Automatically disable collecting branch flags and cycles with
--call-graph lbr. This allows avoiding a bunch of extra MSR
reads in the PMI on Skylake. (Andi Kleen)
Infrastructure changes:
- Dump the stack when a 'perf test -v ' entry segfaults, so far we
would have to run it under gdb with 'set follow-fork-mode child'
set to get a proper backtrace (Arnaldo Carvalho de Melo)
- Initialize the refcnt in 'struct thread' to 1 and fixup its
users accordingly, so that we try to have the same refcount
model accross the perf codebase (Arnaldo Carvalho de Melo)
- More prep work for moving the subcmd infrastructure out of
tools/perf/ and into tools/lib/subcmd/ to be used by other
tools/ living utilities (Josh Poimboeuf)
- Fix 'perf test' hist testcases when kptr_restrict is on (Namhyung Kim)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
It takes three minutes to enter into hibernation on some OEM SKL
machines and we see many codec spurious response after thaw() opertion.
This is because HDA is still in D0 state after freeze() call and
pci_pm_freeze/pci_pm_freeze_noirq() don't set D3 hot in pci_bus driver.
It seems bios still access HDA when system enter into freeze state,
HDA will receive codec response interrupt immediately after thaw() call.
Because of this unexpected interrupt, HDA enter into a abnormal
state and slow down the system enter into hibernation.
In this patch, we put HDA into D3 hot state in azx_freeze_noirq() and
put HDA into D0 state in azx_thaw_noirq().
V2: Only apply this fix to SKL+
Fix compile error when CONFIG_PM_SLEEP isn't defined
[Yet another fix for CONFIG_PM_SLEEP ifdef and the additional comment
by tiwai]
Signed-off-by: Xiong Zhang <xiong.y.zhang@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
User visible changes:
- Fix 'perf list' segfault due to lack of support for PERF_CONF_SW_BPF_OUTPUT
in an array used just for printing available events, robustify the code
involved (Arnaldo Carvalho de Melo)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=8MPk
-----END PGP SIGNATURE-----
Merge tag 'perf-urgent-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent
Pull perf/urgent tooling fix from Arnaldo Carvalho de Melo:
User visible changes:
- Fix 'perf list' segfault due to lack of support for PERF_CONF_SW_BPF_OUTPUT
in an array used just for printing available events, robustify the code
involved (Arnaldo Carvalho de Melo)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
User visible:
- Add record.build-id config option to 'perf record', to allow configuring
in the ~/.perfconfig file if and how build-ids should be processed, allowing
a permanent setting for options such as -B and -N: (Namhyung Kim)
$ perf record -h -B -N
Usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
-B, --no-buildid do not collect buildids in perf.data
-N, --no-buildid-cache do not update the buildid cache
$
Infrastructure:
- Move code for options parsing and subcommand handling from tools/perf/
to tools/lib/subcmd/, so that it can be used by other tools/ living
utilities (Josh Poimboeuf)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=d45C
-----END PGP SIGNATURE-----
Merge tag 'perf-core-for-mingo-2.1' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core
Pull perf/core improvements from Arnaldo Carvalho de Melo:
User visible changes:
- Add record.build-id config option to 'perf record', to allow configuring
in the ~/.perfconfig file if and how build-ids should be processed, allowing
a permanent setting for options such as -B and -N: (Namhyung Kim)
$ perf record -h -B -N
Usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
-B, --no-buildid do not collect buildids in perf.data
-N, --no-buildid-cache do not update the buildid cache
$
Infrastructure changes:
- Move code for options parsing and subcommand handling from tools/perf/
to tools/lib/subcmd/, so that it can be used by other tools/ living
utilities (Josh Poimboeuf)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Commit 2910ff17d1
introduced a regression which would remove a recently added spare via
slot_store. Revert part of the patch which touches slot_store() and add
the disk directly using pers->hot_add_disk()
Fixes: 2910ff17d1 ("md: remove_and_add_spares() to activate specific
rdev")
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: Pawel Baldysiak <pawel.baldysiak@intel.com>
Signed-off-by: NeilBrown <neilb@suse.com>
Neil pointed out setting journal disk role to raid_disks will confuse
reshape if we support reshape eventually. Switching the role to 0 (we
should be fine as long as the value >=0) and skip sysfs file creation to
avoid error.
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: NeilBrown <neilb@suse.com>
This is an oversight that made use of the trip-point-based fan managenent on
cards that never expose those. This led the fan to stay at fan_min.
Fortunately, the emergency code would kick when the temperature would reach
90°C.
Reported-by: Tom Englund <tomenglund26@gmail.com>
Tested-by: Tom Englund <tomenglund26@gmail.com>
Signed-off-by: Martin Peres <martin.peres@free.fr>
Tested-by: Daemon32 <lnf.purple@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=92126
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Cc: stable@vger.kernel.org
Pull networking fixes from David Miller:
1) Fix uninitialized variable warnings in nfnetlink_queue, a lot of
people reported this... From Arnd Bergmann.
2) Don't init mutex twice in i40e driver, from Jesse Brandeburg.
3) Fix spurious EBUSY in rhashtable, from Herbert Xu.
4) Missing DMA unmaps in mvpp2 driver, from Marcin Wojtas.
5) Fix race with work structure access in pppoe driver causing
corruptions, from Guillaume Nault.
6) Fix OOPS due to sh_eth_rx() not checking whether netdev_alloc_skb()
actually succeeded or not, from Sergei Shtylyov.
7) Don't lose flags when settifn IFA_F_OPTIMISTIC in ipv6 code, from
Bjørn Mork.
8) VXLAN_HD_RCO defined incorrectly, fix from Jiri Benc.
9) Fix clock source used for cookies in SCTP, from Marcelo Ricardo
Leitner.
10) aurora driver needs HAS_DMA dependency, from Geert Uytterhoeven.
11) ndo_fill_metadata_dst op of vxlan has to handle ipv6 tunneling
properly as well, from Jiri Benc.
12) Handle request sockets properly in xfrm layer, from Eric Dumazet.
13) Double stats update in ipv6 geneve transmit path, fix from Pravin B
Shelar.
14) sk->sk_policy[] needs RCU protection, and as a result
xfrm_policy_destroy() needs to free policies using an RCU grace
period, from Eric Dumazet.
15) SCTP needs to clone ipv6 tx options in order to avoid use after
free, from Eric Dumazet.
16) Missing kbuild export if ila.h, from Stephen Hemminger.
17) Missing mdiobus_alloc() return value checking in mdio-mux.c, from
Tobias Klauser.
18) Validate protocol value range in ->create() methods, from Hannes
Frederic Sowa.
19) Fix early socket demux races that result in illegal dst reuse, from
Eric Dumazet.
20) Validate socket address length in pptp code, from WANG Cong.
21) skb_reorder_vlan_header() uses incorrect offset and can corrupt
packets, from Vlad Yasevich.
22) Fix memory leaks in nl80211 registry code, from Ola Olsson.
23) Timeout loop count handing fixes in mISDN, xgbe, qlge, sfc, and
qlcnic. From Dan Carpenter.
24) msg.msg_iocb needs to be cleared in recvfrom() otherwise, for
example, AF_ALG will interpret it as an async call. From Tadeusz
Struk.
25) inetpeer_set_addr_v4 forgets to initialize the 'vif' field, from
Eric Dumazet.
26) rhashtable enforces the minimum table size not early enough,
breaking how we calculate the per-cpu lock allocations. From
Herbert Xu.
27) Fix FCC port lockup in 82xx driver, from Martin Roth.
28) FOU sockets need to be freed using RCU, from Hannes Frederic Sowa.
29) Fix out-of-bounds access in __skb_complete_tx_timestamp() and
sock_setsockopt() wrt. timestamp handling. From WANG Cong.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (117 commits)
net: check both type and procotol for tcp sockets
drivers: net: xgene: fix Tx flow control
tcp: restore fastopen with no data in SYN packet
af_unix: Revert 'lock_interruptible' in stream receive code
fou: clean up socket with kfree_rcu
82xx: FCC: Fixing a bug causing to FCC port lock-up
gianfar: Don't enable RX Filer if not supported
net: fix warnings in 'make htmldocs' by moving macro definition out of field declaration
rhashtable: Fix walker list corruption
rhashtable: Enforce minimum size on initial hash table
inet: tcp: fix inetpeer_set_addr_v4()
ipv6: automatically enable stable privacy mode if stable_secret set
net: fix uninitialized variable issue
bluetooth: Validate socket address length in sco_sock_bind().
net_sched: make qdisc_tree_decrease_qlen() work for non mq
ser_gigaset: remove unnecessary kfree() calls from release method
ser_gigaset: fix deallocation of platform device structure
ser_gigaset: turn nonsense checks into WARN_ON
ser_gigaset: fix up NULL checks
qlcnic: fix a timeout loop
...
Dmitry reported the following out-of-bound access:
Call Trace:
[<ffffffff816cec2e>] __asan_report_load4_noabort+0x3e/0x40
mm/kasan/report.c:294
[<ffffffff84affb14>] sock_setsockopt+0x1284/0x13d0 net/core/sock.c:880
[< inline >] SYSC_setsockopt net/socket.c:1746
[<ffffffff84aed7ee>] SyS_setsockopt+0x1fe/0x240 net/socket.c:1729
[<ffffffff85c18c76>] entry_SYSCALL_64_fastpath+0x16/0x7a
arch/x86/entry/entry_64.S:185
This is because we mistake a raw socket as a tcp socket.
We should check both sk->sk_type and sk->sk_protocol to ensure
it is a tcp socket.
Willem points out __skb_complete_tx_timestamp() needs to fix as well.
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Willem de Bruijn <willemdebruijn.kernel@gmail.com>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently the Tx flow control is based on reading the hardware state,
which is not accurate since it may not reflect the descriptors that
are not yet reached the memory.
To accurately control the Tx flow, changing it to be software based.
Signed-off-by: Iyappan Subramanian <isubramanian@apm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yuchung tracked a regression caused by commit 57be5bdad7 ("ip: convert
tcp_sendmsg() to iov_iter primitives") for TCP Fast Open.
Some Fast Open users do not actually add any data in the SYN packet.
Fixes: 57be5bdad7 ("ip: convert tcp_sendmsg() to iov_iter primitives")
Reported-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
With b3ca9b02b0, the AF_UNIX SOCK_STREAM
receive code was changed from using mutex_lock(&u->readlock) to
mutex_lock_interruptible(&u->readlock) to prevent signals from being
delayed for an indefinite time if a thread sleeping on the mutex
happened to be selected for handling the signal. But this was never a
problem with the stream receive code (as opposed to its datagram
counterpart) as that never went to sleep waiting for new messages with the
mutex held and thus, wouldn't cause secondary readers to block on the
mutex waiting for the sleeping primary reader. As the interruptible
locking makes the code more complicated in exchange for no benefit,
change it back to using mutex_lock.
Signed-off-by: Rainer Weikusat <rweikusat@mobileactivedefense.com>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull drm fixes from Dave Airlie:
"Some i915 fixes, one omap fix, one core regression fix.
Not even enough fixes for a twelve days of xmas song, which seemms
good"
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
drm: Don't overwrite UNVERFIED mode status to OK
drm/omap: fix fbdev pix format to support all platforms
drm/i915: Do a better job at disabling primary plane in the noatomic case.
drm/i915/skl: Double RC6 WRL always on
drm/i915/skl: Disable coarse power gating up until F0
drm/i915: Remove incorrect warning in context cleanup
The Cavium guys reported a soft lockup on their arm64 machine, caused by
commit c55a6ffa62 ("locking/osq: Relax atomic semantics"):
mutex_optimistic_spin+0x9c/0x1d0
__mutex_lock_slowpath+0x44/0x158
mutex_lock+0x54/0x58
kernfs_iop_permission+0x38/0x70
__inode_permission+0x88/0xd8
inode_permission+0x30/0x6c
link_path_walk+0x68/0x4d4
path_openat+0xb4/0x2bc
do_filp_open+0x74/0xd0
do_sys_open+0x14c/0x228
SyS_openat+0x3c/0x48
el0_svc_naked+0x24/0x28
This is because in osq_lock we initialise the node for the current CPU:
node->locked = 0;
node->next = NULL;
node->cpu = curr;
and then publish the current CPU in the lock tail:
old = atomic_xchg_acquire(&lock->tail, curr);
Once the update to lock->tail is visible to another CPU, the node is
then live and can be both read and updated by concurrent lockers.
Unfortunately, the ACQUIRE semantics of the xchg operation mean that
there is no guarantee the contents of the node will be visible before
lock tail is updated. This can lead to lock corruption when, for
example, a concurrent locker races to set the next field.
Fixes: c55a6ffa62 ("locking/osq: Relax atomic semantics"):
Reported-by: David Daney <ddaney@caviumnetworks.com>
Reported-by: Andrew Pinski <andrew.pinski@caviumnetworks.com>
Tested-by: Andrew Pinski <andrew.pinski@caviumnetworks.com>
Acked-by: Davidlohr Bueso <dave@stgolabs.net>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1449856001-21177-1-git-send-email-will.deacon@arm.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Allowing to override record aggr_mode. It's possible to use perf stat
like:
$ perf stat report -A
$ perf stat report --per-core
$ perf stat report --per-socket
To customize the recorded aggregate mode regardless what was used during
the stat record command.
Reported-by: Kan Liang <kan.liang@intel.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1446734469-11352-19-git-send-email-jolsa@kernel.org
[ Renamed 'stat' parameter to 'st' to fix 'already defined' build error with older distros (e.g. RHEL6.7) ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding processing of event update events, so perf stat report can store
additional info for events - unit,scale,name.
Committer note:
Before:
# perf stat record -e power/energy-cores/ -a
^C
Performance counter stats for 'system wide':
77.41 Joules power/energy-cores/
1.597176695 seconds time elapsed
# perf stat report
Performance counter stats for '/home/acme/bin/perf stat record -e power/energy-cores/ -a':
332,488,114,176 power/energy-cores/
1.597176695 seconds time elapsed
#
After, using the same perf.data file generated in the "Before" case
above:
# perf stat report
Performance counter stats for '/home/acme/bin/perf stat record -e power/energy-cores/ -a':
77.41 Joules power/energy-cores/
1.597176695 seconds time elapsed
#
Reported-by: Kan Liang <kan.liang@intel.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1446734469-11352-17-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding processing of stat and stat round events.
The stat data com in stat events, using generic function
process_stat_round_event to store data under perf_evsel object.
The stat-round events comes each interval or as last event in non
interval mode. The function process_stat_round_event process stored data
for each perf_evsel object and print it out.
Committer note:
After this patch:
$ perf stat record usleep 1
Performance counter stats for 'usleep 1':
0.498381 task-clock (msec) # 0.571 CPUs utilized
2 context-switches # 0.004 M/sec
0 cpu-migrations # 0.000 K/sec
149 page-faults # 0.299 M/sec
1,271,635 cycles # 2.552 GHz
928,712 stalled-cycles-frontend # 73.03% frontend cycles idle
663,286 stalled-cycles-backend # 52.16% backend cycles idle
792,614 instructions # 0.62 insns per cycle
# 1.17 stalled cycles per insn
136,850 branches # 274.589 M/sec
<not counted> branch-misses (0.00%)
0.000873419 seconds time elapsed
$
$ perf stat report
Performance counter stats for '/home/acme/bin/perf stat record usleep 1':
0.498381 task-clock (msec) # 0.571 CPUs utilized
2 context-switches # 0.004 M/sec
0 cpu-migrations # 0.000 K/sec
149 page-faults # 0.299 M/sec
1,271,635 cycles # 2.552 GHz
928,712 stalled-cycles-frontend # 73.03% frontend cycles idle
663,286 stalled-cycles-backend # 52.16% backend cycles idle
792,614 instructions # 0.62 insns per cycle
# 1.17 stalled cycles per insn
136,850 branches # 274.589 M/sec
<not counted> branch-misses (0.00%)
0.000873419 seconds time elapsed
$
Reported-by: Kan Liang <kan.liang@intel.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1446734469-11352-16-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So we have csv_sep properly initialized before report command leg.
Reported-by: Kan Liang <kan.liang@intel.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1446734469-11352-18-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Using perf.data's perf_env data to initialize aggregate config.
Reported-by: Kan Liang <kan.liang@intel.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1446734469-11352-15-git-send-email-jolsa@kernel.org
[ s/stat/st/g, s/socket/socket_id/g to fix 'already defined' build error with older distros (e.g. RHEL6.7) ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding processing of stat config event and initialize stat_config
object.
Reported-by: Kan Liang <kan.liang@intel.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1446734469-11352-14-git-send-email-jolsa@kernel.org
[ Renamed 'stat' parameter to 'st' to fix 'already defined' build error with older distros (e.g. RHEL6.7) ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding processing of cpu/threads maps. Configuring session's evlist with
these maps.
Reported-by: Kan Liang <kan.liang@intel.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1446734469-11352-13-git-send-email-jolsa@kernel.org
[ s/stat/st/g, s/time/tm/g parameters to fix 'already defined' build error with older distros (e.g. RHEL6.7) ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pull libnvdimm fixes from Dan Williams:
- Two bug fixes for misuse of PAGE_MASK in scatterlist and dma-debug.
These are tagged for -stable. The scatterlist impact is potentially
corrupted dma addresses on HIGHMEM enabled platforms.
- A minor locking fix for the NFIT hot-add implementation that is new
in 4.4-rc. This would only trigger in the case a hot-add raced
driver removal.
* 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
dma-debug: Fix dma_debug_entry offset calculation
Revert "scatterlist: use sg_phys()"
nfit: acpi_nfit_notify(): Do not leave device locked
Adding 'perf stat report' command support. ATM it only processes attr
events and display nothing.
Reported-by: Kan Liang <kan.liang@intel.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1446734469-11352-12-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
