Both raid1 and raid10 create a mempool during startup.
If the 'alloc' function for this mempool fails, unplug_slaves
is called.
If that happens when the pool is being initialised, unplug_slaves
will try to use the 'conf' structure that isn't filled in yet, and
badness will happen.
So ensure that unplug_slaves doesn't get called unless we know
that the conf structure if fully initialised.
Signed-off-by: NeilBrown <neilb@suse.de>
Deallocating a raid5_conf_t structure requires taking 'device_lock'.
Ensure it is initialized before it is used, i.e. initialize the lock
before attempting any further initializations that might fail.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
During 'check' of a raid1 or raid10 it is possible for the management
thread to spend a lot of time running 'memcmp' on blocks from
different devices, so make sure the thread has a chance to schedule.
raid5d already has a cond_resched (in process_stripe).
Reported-By: Lee Howard <faxguy@howardsilvan.com>
Signed-off-by: NeilBrown <neilb@suse.de>
This reverts commit df10cfbc4d.
This patch was based on a misunderstanding and risks introducing a busy-wait loop.
So revert it.
Acked-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Sometimes we will get the incorrect display modeline when parsing the detailed
timing in EDID. For example:
>hsync/vsync width is zero
>sync is beyond the blank.
So add the basic check for the detailed timing in EDID to avoid the incorrect
display modeline.
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
D1MODE_INTERLEAVE_EN was getting set in some cases
in the encoder quirks function due to the changes in
5a9bcacc0a
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Based partly on a patch from
Christian Koenig <deathsimple@vodafone.de>
- fix several memory leaks in radeon_connector->edid handling
- store edid in radeon_connector->edid in detect() or get_modes()
- switch hdmi detect code to use radeon_connector->edid
- add support for oem boards multiple connectors that share
a ddc line.
- short circuit lvds_detect() if have a stored edid
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
The destination keyring specified to request_key() and co. is made available to
the process that instantiates the key (the slave process started by
/sbin/request-key typically). This is passed in the request_key_auth struct as
the dest_keyring member.
keyctl_instantiate_key and keyctl_negate_key() call get_instantiation_keyring()
to get the keyring to attach the newly constructed key to at the end of
instantiation. This may be given a specific keyring into which a link will be
made later, or it may be asked to find the keyring passed to request_key(). In
the former case, it returns a keyring with the refcount incremented by
lookup_user_key(); in the latter case, it returns the keyring from the
request_key_auth struct - and does _not_ increment the refcount.
The latter case will eventually result in an oops when the keyring prematurely
runs out of references and gets destroyed. The effect may take some time to
show up as the key is destroyed lazily.
To fix this, the keyring returned by get_instantiation_keyring() must always
have its refcount incremented, no matter where it comes from.
This can be tested by setting /etc/request-key.conf to:
#OP TYPE DESCRIPTION CALLOUT INFO PROGRAM ARG1 ARG2 ARG3 ...
#====== ======= =============== =============== ===============================
create * test:* * |/bin/false %u %g %d %{user:_display}
negate * * * /bin/keyctl negate %k 10 @u
and then doing:
keyctl add user _display aaaaaaaa @u
while keyctl request2 user test:x test:x @u &&
keyctl list @u;
do
keyctl request2 user test:x test:x @u;
sleep 31;
keyctl list @u;
done
which will oops eventually. Changing the negate line to have @u rather than
%S at the end is important as that forces the latter case by passing a special
keyring ID rather than an actual keyring ID.
Reported-by: Alexander Zangerl <az@bond.edu.au>
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Alexander Zangerl <az@bond.edu.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
powerpc/pci: Fix MODPOST warning
powerpc/oprofile: Add ppc750 CL as supported by oprofile
powerpc: warning: allocated section `.data_nosave' not in segment
powerpc/kgdb: Fix build failure caused by "kgdb.c: unused variable 'acc'"
powerpc: Fix hypervisor TLB batching
powerpc/mm: Fix hang accessing top of vmalloc space
powerpc: Fix memory leak in axon_msi.c
powerpc/pmac: Fix issues with sleep on some powerbooks
powerpc64/ftrace: use PACA to retrieve TOC in mod_return_to_handler
powerpc/ftrace: show real return addresses in modules
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6:
ACPI button: don't try to use a non-existent lid device
ACPI: video: Loosen strictness of video bus detection code
eeepc-laptop: Prevent a panic when disabling RT2860 wireless when associated
eeepc-laptop: Properly annote eeepc_enable_camera().
ACPI / PCI: Fix NULL pointer dereference in acpi_get_pci_dev() (rev. 2)
fujitsu-laptop: address missed led-class ifdef fixup
ACPI: Kconfig, fix proc aggregator text
ACPI: add AC/DC notifier
* 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6:
OMAP2xxx clock: set up clockdomain pointer in struct clk
OMAP: Fix race condition with autodeps
omap: McBSP: Fix incorrect receiver stop in omap_mcbsp_stop
omap: Initialization of SDRC params on Zoom2
omap: RX-51: Drop I2C-1 speed to 2200
omap: SDMA: Fixing bug in omap_dma_set_global_params()
omap: CONFIG_ISP1301_OMAP redefined in Beagle defconfig
* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable:
Btrfs: always pin metadata in discard mode
Btrfs: enable discard support
Btrfs: add -o discard option
Btrfs: properly wait log writers during log sync
Btrfs: fix possible ENOSPC problems with truncate
Btrfs: fix btrfs acl #ifdef checks
Btrfs: streamline tree-log btree block writeout
Btrfs: avoid tree log commit when there are no changes
Btrfs: only write one super copy during fsync
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6:
sysfs: Allow sysfs_notify_dirent to be called from interrupt context.
sysfs: Allow sysfs_move_dir(..., NULL) again.
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6:
USB: gadget: Fix EEM driver comments and VID/PID
usb-storage: Workaround devices with bogus sense size
USB: ehci: Fix IST boundary checking interval math.
USB: option: Support for AIRPLUS MCD650 Datacard
USB: whci-hcd: always do an update after processing a halted qTD
USB: whci-hcd: handle early deletion of endpoints
USB: wusb: don't use the stack to read security descriptor
USB: rename Documentation/ABI/.../sysfs-class-usb_host
* branch 'tty-fixes'
tty: use the new 'flush_delayed_work()' helper to do ldisc flush
workqueue: add 'flush_delayed_work()' to run and wait for delayed work
tty: Make flush_to_ldisc() locking more robust
If the following sequence of events occurs, then
TREE_PREEMPT_RCU will hang waiting for a grace period to
complete, eventually OOMing the system:
o A TREE_PREEMPT_RCU build of the kernel is booted on a system
with more than 64 physical CPUs present (32 on a 32-bit system).
Alternatively, a TREE_PREEMPT_RCU build of the kernel is booted
with RCU_FANOUT set to a sufficiently small value that the
physical CPUs populate two or more leaf rcu_node structures.
o A task is preempted in an RCU read-side critical section
while running on a CPU corresponding to a given leaf rcu_node
structure.
o All CPUs corresponding to this same leaf rcu_node structure
record quiescent states for the current grace period.
o All of these same CPUs go offline (hence the need for enough
physical CPUs to populate more than one leaf rcu_node structure).
This causes the preempted task to be moved to the root rcu_node
structure.
At this point, there is nothing left to cause the quiescent
state to be propagated up the rcu_node tree, so the current
grace period never completes.
The simplest fix, especially after considering the deadlock
possibilities, is to detect this situation when the last CPU is
offlined, and to set that CPU's ->qsmask bit in its leaf
rcu_node structure. This will cause the next invocation of
force_quiescent_state() to end the grace period.
Without this fix, this hang can be triggered in an hour or so on
some machines with rcutorture and random CPU onlining/offlining.
With this fix, these same machines pass a full 10 hours of this
sort of abuse.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: laijs@cn.fujitsu.com
Cc: dipankar@in.ibm.com
Cc: mathieu.desnoyers@polymtl.ca
Cc: josh@joshtriplett.org
Cc: dvhltc@us.ibm.com
Cc: niv@us.ibm.com
Cc: peterz@infradead.org
Cc: rostedt@goodmis.org
Cc: Valdis.Kletnieks@vt.edu
Cc: dhowells@redhat.com
LKML-Reference: <20091015162614.GA19131@linux.vnet.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
To enable framebuffer compression on a g4x, we not only need the buffer
to tiled (X only), we also need to hold a fence register for the buffer.
Currently we only install a fence register for pre-i965s when setting up
the scanout buffer. Rather than adding some convoluted logic to
g4x_enable_fbc() to acquire a fence register, and perhaps to
g4x_disable_fbc() to release it again, we can extend the acquisition
during setup to all chipsets.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Turns out some machines, like the ThinkPad X40 don't come back if you
don't save/restore this register.
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
As in the commit 9b4a161777, use UPIO_MEM
rather than SERIAL_IO_MEM. Both have the same value.
The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@has_sc@
@@
#include <linux/serial_core.h>
@depends on has_sc@
@@
- SERIAL_IO_MEM
+ UPIO_MEM
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
The 'fsl5200-clocking'-property was dropped since
0d1cde2358. Remove all occurences
in dts-files.
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Some toolchains dislike nested function definition, so we define function match
outside of of_phy_find_device.
Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
- serial Console on PSC1
- 64MB SDRAM
- MTD CFI Flash
- Ethernet FEC
- IDE support
Signed-off-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
- serial Console on PSC1
- 64MB SDRAM
- MTD CFI Flash
- Ethernet FEC
- I2C with PCF8563 and Temp. Sensor ADM9240
- IDE support
Signed-off-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
This patch fixes the BUG: using smp_processor_id() in preemptible
Below is the stripped backtrace.
BUG: using smp_processor_id() in preemptible [00000000] code: init/1
caller is flush_tlb_mm+0x44/0x70
Backtrace:
[<c00225c4>] (dump_backtrace+0x0/0x110) from [<c01713a0>] (dump_stack+0x18/0x1c)
r7:00000000 r6:c00234f0 r5:00000001 r4:c7828000
[<c0171388>] (dump_stack+0x0/0x1c) from [<c0135364>] (debug_smp_processor_id+0xc0/0xf0)
[<c01352a4>] (debug_smp_processor_id+0x0/0xf0) from [<c00234f0>] (flush_tlb_mm+0x44/0x70)
r7:00000000 r6:c60b41a0 r5:c60b4154 r4:00000001
[<c00234ac>] (flush_tlb_mm+0x0/0x70) from [<c0039568>] (dup_mm+0x304/0x38c)
r5:c1f09058 r4:00000000
[<c0039264>] (dup_mm+0x0/0x38c) from [<c0039de4>] (copy_process+0x7b8/0xeb0)
[<c003962c>] (copy_process+0x0/0xeb0) from [<c003a638>] (do_fork+0x15c/0x29c)
[<c003a4dc>] (do_fork+0x0/0x29c) from [<c0021df0>] (sys_clone+0x34/0x3c)
[<c0021dbc>] (sys_clone+0x0/0x3c) from [<c001efa0>] (ret_fast_syscall+0x0/0x2c)
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
The 2.6.32 merge window brought a number of changes to the flexible array
API; this patch updates the documentation to match the new state of
affairs.
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Now that we can filter based on fields via perf record, people
will start using filter expressions and will expect them to
be obvious.
The primary way to see which fields are available is by looking
at the trace output, such as:
gcc-18676 [000] 343.011728: irq_handler_entry: irq=0 handler=timer
cc1-18677 [000] 343.012727: irq_handler_entry: irq=0 handler=timer
cc1-18677 [000] 343.032692: irq_handler_entry: irq=0 handler=timer
cc1-18677 [000] 343.033690: irq_handler_entry: irq=0 handler=timer
cc1-18677 [000] 343.034687: irq_handler_entry: irq=0 handler=timer
cc1-18677 [000] 343.035686: irq_handler_entry: irq=0 handler=timer
cc1-18677 [000] 343.036684: irq_handler_entry: irq=0 handler=timer
While 'irq==0' filters work, the 'handler==<x>' filter expression
does not work:
$ perf record -R -f -a -e irq:irq_handler_entry --filter handler=timer sleep 1
Error: failed to set filter with 22 (Invalid argument)
The problem is that while an 'irq' field exists and is recognized
as a filter field - 'handler' does not exist - its name is 'name'
in the output.
To solve this, we need to synchronize the printout and the field
names, wherever possible.
In cases where the printout prints a non-field, we enclose
that information in square brackets, such as:
perf-1380 [013] 724.903505: softirq_exit: vec=9 [action=RCU]
perf-1380 [013] 724.904482: softirq_exit: vec=1 [action=TIMER]
This way users can use filter expressions more intuitively: all
fields that show up as 'primary' (non-bracketed) information is
filterable.
This patch harmonizes the field names for all irq, bkl, power,
sched and timer events.
We might in fact think about dropping the print format bit of
generic tracepoints altogether, and just print the fields that
are being recorded.
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Américo Wang noticed that we have a locking imbalance in the
error paths of ftrace_profile_set_filter(), causing potential
leakage of event_mutex.
Also clean up other error codepaths related to event_mutex
while at it.
Plus fix an initialized variable in the subsystem filter code.
Reported-by: Américo Wang <xiyou.wangcong@gmail.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <2375c9f90910150247u5ccb8e2at58c764e385ffa490@mail.gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Add a new option "--filter <filter_str>" to perf record, and
it should be right after "-e trace_point":
#./perf record -R -f -e irq:irq_handler_entry --filter irq==18
^C
# ./perf trace
perf-4303 ... irq_handler_entry: irq=18 handler=eth0
init-0 ... irq_handler_entry: irq=18 handler=eth0
init-0 ... irq_handler_entry: irq=18 handler=eth0
init-0 ... irq_handler_entry: irq=18 handler=eth0
init-0 ... irq_handler_entry: irq=18 handler=eth0
See Documentation/trace/events.txt for the syntax of filter
expressions.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <4AD6955F.90602@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
- Add an ioctl to allocate a filter for a perf event.
- Free the filter when the associated perf event is to be freed.
- Do the filtering in perf_swevent_match().
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <4AD69546.8050401@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
"==" will always do a full match, and "~" will do a glob match.
In the future, we may add "=~" for regex match.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <4AD69528.3050309@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Change:
for_each_pred
for_each_subsystem
To:
for_each_subsystem
for_each_pred
This change also prepares for later patches.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <4AD69502.8060903@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Merge reason: to add event filter support we need the following
commits from the tracing tree:
3f6fe06: tracing/filters: Unify the regex parsing helpers
1889d20: tracing/filters: Provide basic regex support
737f453: tracing/filters: Cleanup useless headers
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The (char *) for all the static strings was a fix for the
symptom and not the disease. The real issue was that the
function prototypes needed to be declared "const char *".
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <20091014194400.635935008@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The opterators '-' and '+' are not handled in the trace print
format.
To do: '++' and '--'.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <20091014194400.330843045@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Add the irqs disabled, preemption count, need resched, and other
info that is shown in the latency format of ftrace.
# perf trace -l
perf-16457 2..s2. 53636.260344: kmem_cache_free: call_site=ffffffff811198f
perf-16457 2..s2. 53636.264330: kmem_cache_free: call_site=ffffffff811198f
perf-16457 2d.s4. 53636.300006: kmem_cache_free: call_site=ffffffff810d889
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <20091014194400.076588953@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The ftrace output events can have either arguments or no
arguments. The parser needs to be able to handle both.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <20091014194359.790221427@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
