Commit graph

415287 commits

Author SHA1 Message Date
Kirill A. Shutemov
ee53664bda mm: Fix NULL pointer dereference in madvise(MADV_WILLNEED) support
Sasha Levin found a NULL pointer dereference that is due to a missing
page table lock, which in turn is due to the pmd entry in question being
a transparent huge-table entry.

The code - introduced in commit 1998cc0489 ("mm: make
madvise(MADV_WILLNEED) support swap file prefetch") - correctly checks
for this situation using pmd_none_or_trans_huge_or_clear_bad(), but it
turns out that that function doesn't work correctly.

pmd_none_or_trans_huge_or_clear_bad() expected that pmd_bad() would
trigger if the transparent hugepage bit was set, but it doesn't do that
if pmd_numa() is also set. Note that the NUMA bit only gets set on real
NUMA machines, so people trying to reproduce this on most normal
development systems would never actually trigger this.

Fix it by removing the very subtle (and subtly incorrect) expectation,
and instead just checking pmd_trans_huge() explicitly.

Reported-by: Sasha Levin <sasha.levin@oracle.com>
Acked-by: Andrea Arcangeli <aarcange@redhat.com>
[ Additionally remove the now stale test for pmd_trans_huge() inside the
  pmd_bad() case - Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-12-20 12:17:03 -08:00
Kevin Hilman
95fcfa70f3 Renesas ARM based SoC fixes for v3.13
* r8a7790 (R-Car H1) SoC
   - Correct GPIO resources in DT.
 
     This problem has been present since GPIOs were added to the r8a7790 SoC
     by f98e10c88a ("ARM: shmobile: r8a7790: Add GPIO controller
     devices to device tree") in v3.12-rc1.
 
 * irqchip renesas-intc-irqpin
   - Correct register bitfield shift calculation
 
     This bug has been present since the renesas-intc-irqpin driver was
     introduced by 443580486e ("irqchip: Renesas INTC External IRQ pin
     driver") in v3.10-rc1
 
 * Lager board
   - Do not build the phy fixup unless CONFIG_PHYLIB is enabled
 
     This problem was introduced by 48c8b96f21
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.15 (GNU/Linux)
 
 iQIcBAABAgAGBQJSqmcQAAoJENfPZGlqN0++VTgP/3II1c6Wge1s9TjQ2FnD874X
 wVMLAY8oJp+mNiiov+iNtnP0deyjgWr2XfwQ8QNsWTVEAPQjvInOydr7B24SFb7e
 FnA5gscGQr49xMorR+x8yUnlyIE6UAbwwgbP2GljsrTZFURo9ohfUA3LP9wSPHJ9
 MYRopGb7ZlNaTwxEi5t6rZV3mrBSzbSUZ0YbQbN5vAhm1zoZ7hzfXUsk9ZwhVNnI
 RFHOy01DDCb0EM8Yut4DfWMri9VgsMcR+bo73Js1ljpkUujCzJsr5fNlpzCi2unX
 Xw9s6WCSNaNGLzgGbbLojAUIkrtMUEp/XT2iATIalKHT0zULqe6kNcnonFJ8GmQk
 nrNBF4/rn45S4QFSEiqavrWpmVE78pMEzPTBpmR15+KloLuutdYrqb/HUM60lVh3
 zVeL2cG9fTFx2CUODNX9ABGlO7CCDz4MgK5RgSpnnxjIgunLEb4gA+6ncqaQ4XhM
 Ldicte6ppq26PNQemiL61PbfVVNE6hcW//IZreFUEQkP2Ls/DzWfBVtOQaWj3fpb
 DEK/kvHGA1HVrLTt43WVM5kPy5OMKDGFv6w7NRayTMvUDguuwp5QeGxSFsi/104Z
 q5Qaekvi0wIGaWfkRGHB/8o9z/zL/ifW/cqNXqW1Yxf2+KZGuRWIpxZLzMwBfhzb
 LoENHwKcU/D7YhzXIGHG
 =Vbzt
 -----END PGP SIGNATURE-----

Merge tag 'renesas-fixes-for-v3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into fixes

From Simon Horman:
Renesas ARM based SoC fixes for v3.13

* r8a7790 (R-Car H1) SoC
  - Correct GPIO resources in DT.

    This problem has been present since GPIOs were added to the r8a7790 SoC
    by f98e10c88a ("ARM: shmobile: r8a7790: Add GPIO controller
    devices to device tree") in v3.12-rc1.

* irqchip renesas-intc-irqpin
  - Correct register bitfield shift calculation

    This bug has been present since the renesas-intc-irqpin driver was
    introduced by 443580486e ("irqchip: Renesas INTC External IRQ pin
    driver") in v3.10-rc1

* Lager board
  - Do not build the phy fixup unless CONFIG_PHYLIB is enabled

    This problem was introduced by 48c8b96f21

* tag 'renesas-fixes-for-v3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  ARM: shmobile: r8a7790: Fix GPIO resources in DTS
  irqchip: renesas-intc-irqpin: Fix register bitfield shift calculation
  ARM: shmobile: lager: phy fixup needs CONFIG_PHYLIB

Signed-off-by: Kevin Hilman <khilman@linaro.org>
2013-12-20 11:28:30 -08:00
Yann Droneaud
6cc3df840a IB/uverbs: Check access to userspace response buffer in extended command
This patch adds a check on the output buffer with access_ok(VERIFY_WRITE, ...)
to ensure the whole buffer is in userspace memory before using the
pointer in uverbs functions.  If the buffer or a subset of it is not
valid, returns -EFAULT to the caller.

This will also catch invalid buffer before the final call to
copy_to_user() which happen late in most uverb functions.

Just like the check in read(2) syscall, it's a sanity check to detect
invalid parameters provided by userspace. This particular check was added
in vfs_read() by Linus Torvalds for v2.6.12 with following commit message:

https://git.kernel.org/cgit/linux/kernel/git/tglx/history.git/commit/?id=fd770e66c9a65b14ce114e171266cf6f393df502

  Make read/write always do the full "access_ok()" tests.

  The actual user copy will do them too, but only for the
  range that ends up being actually copied. That hides
  bugs when the range has been clamped by file size or other
  issues.

Note: there's no need to check input buffer since vfs_write() already does
access_ok(VERIFY_READ, ...) as part of write() syscall.

Link: http://marc.info/?i=cover.1387273677.git.ydroneaud@opteya.com
Signed-off-by: Yann Droneaud <ydroneaud@opteya.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-12-20 10:54:34 -08:00
Yann Droneaud
6bcca3d4a3 IB/uverbs: Check input length in flow steering uverbs
Since ib_copy_from_udata() doesn't check yet the available input data
length before accessing userspace memory, an explicit check of this
length is required to prevent:

- reading past the user provided buffer,
- underflow when subtracting the expected command size from the input
  length.

This will ensure the newly added flow steering uverbs don't try to
process truncated commands.

Link: http://marc.info/?i=cover.1386798254.git.ydroneaud@opteya.com>
Signed-off-by: Yann Droneaud <ydroneaud@opteya.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-12-20 10:54:33 -08:00
Yann Droneaud
98a37510ec IB/uverbs: Set error code when fail to consume all flow_spec items
If the flow_spec items parsed count does not match the number of items
declared in the flow_attr command, or if not all bytes are used for
flow_spec items (eg. trailing garbage), a log message is reported and
the function leave through the error path. Unfortunately the error
code is currently not set.

This patch set error code to -EINVAL in such cases, so that the error
is reported to userspace instead of silently fail.

Link: http://marc.info/?i=cover.1386798254.git.ydroneaud@opteya.com>
Signed-off-by: Yann Droneaud <ydroneaud@opteya.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-12-20 10:54:33 -08:00
Yann Droneaud
c780d82a74 IB/uverbs: Check reserved fields in create_flow
As noted by Daniel Vetter in its article "Botching up ioctls"[1]

  "Check *all* unused fields and flags and all the padding for whether
   it's 0, and reject the ioctl if that's not the case.  Otherwise
   your nice plan for future extensions is going right down the
   gutters since someone *will* submit an ioctl struct with random
   stack garbage in the yet unused parts. Which then bakes in the ABI
   that those fields can never be used for anything else but garbage."

It's important to ensure that reserved fields are set to known value,
so that it will be possible to use them latter to extend the ABI.

The same reasonning apply to comp_mask field present in newer uverbs
command: per commit 22878dbc91 ("IB/core: Better checking of
userspace values for receive flow steering"), unsupported values in
comp_mask are rejected.

[1] http://blog.ffwll.ch/2013/11/botching-up-ioctls.html

Link: http://marc.info/?i=cover.1386798254.git.ydroneaud@opteya.com>
Signed-off-by: Yann Droneaud <ydroneaud@opteya.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-12-20 10:54:32 -08:00
Yann Droneaud
2782c2d302 IB/uverbs: Check comp_mask in destroy_flow
Just like the check added to create_flow in 22878dbc91 ("IB/core:
Better checking of userspace values for receive flow steering"),
comp_mask must be checked in destroy_flow too.

Since only empty comp_mask is currently supported, any other value
must be rejected.

This check was silently added in a previous patch[1] to move comp_mask
in extended command header, part of previous patchset[2] against
create/destroy_flow uverbs. The idea of moving comp_mask to the header
was discarded for the final patchset[3].

Unfortunately the check added in destroy_flow uverb was not integrated
in the final patchset.

[1] http://marc.info/?i=40175eda10d670d098204da6aa4c327a0171ae5f.1381510045.git.ydroneaud@opteya.com
[2] http://marc.info/?i=cover.1381510045.git.ydroneaud@opteya.com
[3] http://marc.info/?i=cover.1383773832.git.ydroneaud@opteya.com

Cc: Matan Barak <matanb@mellanox.com>
Link: http://marc.info/?i=cover.1386798254.git.ydroneaud@opteya.com>
Signed-off-by: Yann Droneaud <ydroneaud@opteya.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-12-20 10:54:31 -08:00
Yann Droneaud
7efb1b19b3 IB/uverbs: Check reserved field in extended command header
As noted by Daniel Vetter in its article "Botching up ioctls"[1]

  "Check *all* unused fields and flags and all the padding for whether
   it's 0, and reject the ioctl if that's not the case.  Otherwise
   your nice plan for future extensions is going right down the
   gutters since someone *will* submit an ioctl struct with random
   stack garbage in the yet unused parts. Which then bakes in the ABI
   that those fields can never be used for anything else but garbage."

It's important to ensure that reserved fields are set to known value,
so that it will be possible to use them latter to extend the ABI.

The same reasonning apply to comp_mask field present in newer uverbs
command: per commit 22878dbc91 ("IB/core: Better checking of
userspace values for receive flow steering"), unsupported values in
comp_mask are rejected.

[1] http://blog.ffwll.ch/2013/11/botching-up-ioctls.html

Link: http://marc.info/?i=cover.1386798254.git.ydroneaud@opteya.com>
Signed-off-by: Yann Droneaud <ydroneaud@opteya.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-12-20 10:54:30 -08:00
Roland Dreier
a96e4e2ffe IB/uverbs: New macro to set pointers to NULL if length is 0 in INIT_UDATA()
Trying to have a ternary operator to choose between NULL (or 0) and the
real pointer value in invocations leads to an impossible choice between
a sparse error about a literal 0 used as a NULL pointer, and a gcc
warning about "pointer/integer type mismatch in conditional expression."

Rather than clutter the source with more casts, move the ternary
operator into a new INIT_UDATA_BUF_OR_NULL() macro, which makes it
easier to use and simplifies its callers.

Reported-by: Yann Droneaud <ydroneaud@opteya.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-12-20 10:53:44 -08:00
Paolo Bonzini
5e6d26cf48 Patch queue for 3.13 - 2013-12-18
This fixes some grave issues we've only found after 3.13-rc1:
 
   - Make the modularized HV/PR book3s kvm work well as modules
   - Fix some race conditions
   - Fix compilation with certain compilers (booke)
   - Fix THP for book3s_hv
   - Fix preemption for book3s_pr
 
 Alexander Graf (4):
       KVM: PPC: Book3S: PR: Don't clobber our exit handler id
       KVM: PPC: Book3S: PR: Export kvmppc_copy_to|from_svcpu
       KVM: PPC: Book3S: PR: Make svcpu -> vcpu store preempt savvy
       KVM: PPC: Book3S: PR: Enable interrupts earlier
 
 Aneesh Kumar K.V (1):
       powerpc: book3s: kvm: Don't abuse host r2 in exit path
 
 Paul Mackerras (5):
       KVM: PPC: Book3S HV: Fix physical address calculations
       KVM: PPC: Book3S HV: Refine barriers in guest entry/exit
       KVM: PPC: Book3S HV: Make tbacct_lock irq-safe
       KVM: PPC: Book3S HV: Take SRCU read lock around kvm_read_guest() call
       KVM: PPC: Book3S HV: Don't drop low-order page address bits
 
 Scott Wood (1):
       powerpc/kvm/booke: Fix build break due to stack frame size warning
 
 pingfan liu (1):
       powerpc: kvm: fix rare but potential deadlock scene
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iQIcBAABAgAGBQJSscYdAAoJECszeR4D/txgcqAP/1hztHJ+QVwOovEmHSkd6s9G
 A9Ib48U3r/YX5Xugp3VeJQEoSvvRQQDvi1lcu20YO7HRFL3AZBnq2/EgXaMSfu0s
 kKWZiadlpYNkSfjcipuia1yu2auAVWyGTMjuwWhKSH7WJnTrQD17vTNaOhnfrEvY
 wfUTCux7JSUlDnAuNBPHjtWgPsNXZ9U5ODThLVKMuXUceFxse/pRER+RM8/sGwGD
 h5uQicwPAD4bp2epg7zG7NgFs9np1U/WZvwHn3LGlb/eHJW0lB/lqdCFMtBFaDiA
 3GS3AOIJCtWhEPzghUJMyId8Yc7E5Bi27ur+8fOKHddbM+NFR154hTzoOuVZgvmq
 HdNhcjTDfhimKl+aPaQyFpnePBLk2hZ5zEyxr5eMocyvZ+uRL7ghhUBjnNFNXk1k
 FAlzyEWXirdumN2sS9u9/PUhoETL13yhghxXzDq35/rjWxPuLtjvVlmroQfPI5cl
 0AW5d3G5lEnb/vNo/dUFG8EAxunX26sgaro6XxLA3Y/tZ4691S9mNaeyLv/w4VDS
 T9IcLUIhnpkR6HPkXci1mRrX13GC1uBB74jhBJvgJs91UmgLZN3W3VEcS5ulXxxb
 UoLsDSO1qo2Md2KrRltsRcMJAaAjbbcTzApudpN24d6zMCUxxfnjNW9Q8h2+eaoi
 ST9nIxzK3a9HHnnJ6AsJ
 =kveZ
 -----END PGP SIGNATURE-----

Merge tag 'signed-for-3.13' of git://github.com/agraf/linux-2.6 into kvm-master

Patch queue for 3.13 - 2013-12-18

This fixes some grave issues we've only found after 3.13-rc1:

  - Make the modularized HV/PR book3s kvm work well as modules
  - Fix some race conditions
  - Fix compilation with certain compilers (booke)
  - Fix THP for book3s_hv
  - Fix preemption for book3s_pr

Alexander Graf (4):
      KVM: PPC: Book3S: PR: Don't clobber our exit handler id
      KVM: PPC: Book3S: PR: Export kvmppc_copy_to|from_svcpu
      KVM: PPC: Book3S: PR: Make svcpu -> vcpu store preempt savvy
      KVM: PPC: Book3S: PR: Enable interrupts earlier

Aneesh Kumar K.V (1):
      powerpc: book3s: kvm: Don't abuse host r2 in exit path

Paul Mackerras (5):
      KVM: PPC: Book3S HV: Fix physical address calculations
      KVM: PPC: Book3S HV: Refine barriers in guest entry/exit
      KVM: PPC: Book3S HV: Make tbacct_lock irq-safe
      KVM: PPC: Book3S HV: Take SRCU read lock around kvm_read_guest() call
      KVM: PPC: Book3S HV: Don't drop low-order page address bits

Scott Wood (1):
      powerpc/kvm/booke: Fix build break due to stack frame size warning

pingfan liu (1):
      powerpc: kvm: fix rare but potential deadlock scene
2013-12-20 19:13:58 +01:00
Linus Torvalds
4203d0eb3a Bug-fixes:
- Fix balloon driver for auto-translate guests (PVHVM, ARM) to not use
    scratch pages.
  - Fix block API header for ARM32 and ARM64 to have proper layout
  - On ARM when mapping guests, stick on PTE_SPECIAL
  - When using SWIOTLB under ARM, don't call swiotlb functions twice
  - When unmapping guests memory and if we fail, don't return pages which
    failed to be unmapped.
  - Grant driver was using the wrong address on ARM.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.15 (GNU/Linux)
 
 iQEcBAABAgAGBQJSsdFEAAoJEFjIrFwIi8fJDQwIAL1ygSTwSXdH6TlqtD9GVdsE
 G6kiCM7G6VXrKMf8zBtgbGpcl6FT0zOIz4cRcXbyDniuHTjdWuH9dlmZOzFMAirE
 uMWwOB1EfmRBEJRsd2pW0Gj0O6VABWh8BHklFCeWUvk/Stlw9uXqIwf7Pjcj6wPT
 XW+ZywqsAve4MM60Rz/nMsakLcTK4i5SCRgPPFgAnPKUod3f/QbEHwci/lpinJFv
 AuQp2JytCsDc2nehEi1kMwEx7LLBlUcjXTqPG5lhQnXrFleDtMdCJd9dGjeze7Qu
 F5sftfdlp18ojQwegv1PGiVI4jV8rIq29ybaef/y9DLd3nC3rmi8B8/m9RG2qyI=
 =dUsw
 -----END PGP SIGNATURE-----

Merge tag 'stable/for-linus-3.13-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip

Pull Xen bugfixes from Konrad Rzeszutek Wilk:
 - Fix balloon driver for auto-translate guests (PVHVM, ARM) to not use
   scratch pages.
 - Fix block API header for ARM32 and ARM64 to have proper layout
 - On ARM when mapping guests, stick on PTE_SPECIAL
 - When using SWIOTLB under ARM, don't call swiotlb functions twice
 - When unmapping guests memory and if we fail, don't return pages which
   failed to be unmapped.
 - Grant driver was using the wrong address on ARM.

* tag 'stable/for-linus-3.13-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen/balloon: Seperate the auto-translate logic properly (v2)
  xen/block: Correctly define structures in public headers on ARM32 and ARM64
  arm: xen: foreign mapping PTEs are special.
  xen/arm64: do not call the swiotlb functions twice
  xen: privcmd: do not return pages which we have failed to unmap
  XEN: Grant table address, xen_hvm_resume_frames, is a phys_addr not a pfn
2013-12-20 09:34:54 -08:00
Linus Torvalds
5263f0a880 This fixes a long standing bug in the ftrace profiler.
The problem is that the profiler only initializes the online
 CPUs, and not possible CPUs. This causes issues if the user takes
 CPUs online or offline while the profiler is running.
 
 If we online a CPU after starting the profiler, we lose all the
 trace information on the CPU going online.
 
 If we offline a CPU after running a test and start a new test, it
 will not clear the old data from that CPU.
 
 This bug causes incorrect data to be reported to the user if they
 online or offline CPUs during the profiling.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.15 (GNU/Linux)
 
 iQEcBAABAgAGBQJSsNBHAAoJEKQekfcNnQGuKP8H/2mol/d7z2vANh7/FeNjTKIN
 VkRzDEwUIwoaJBsL75EDDXBFx7w8jjAsXyoTrqrvMRV4UNcsfm46mohQTPAmK39y
 muqodL1VnVXdKrUmtw/1nL7yDi2KltQH1UwOgvwXGuUFIq5cuCXNQxNK9/1fVVVn
 tIMNz5kEAG3XCwnqP0PgQxWCuA7s+aQR0ijTf4vPf1G3IJujPyG9VhJWcGS3dJTR
 t8TPyatd9D/S+7/r7iZ9hS8nWpaka3qJfhiWqk16SC9LiUXVA8oFOVMoN7n6Co5E
 6r2dNo01WOABlojCxi1t3afUtcV1bUjBnVkiDva5cSc84pQSxe1qRrIpjTmHk00=
 =MSZs
 -----END PGP SIGNATURE-----

Merge tag 'trace-fixes-v3.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

Pull ftrace fix from Steven Rostedt:
 "This fixes a long standing bug in the ftrace profiler.  The problem is
  that the profiler only initializes the online CPUs, and not possible
  CPUs.  This causes issues if the user takes CPUs online or offline
  while the profiler is running.

  If we online a CPU after starting the profiler, we lose all the trace
  information on the CPU going online.

  If we offline a CPU after running a test and start a new test, it will
  not clear the old data from that CPU.

  This bug causes incorrect data to be reported to the user if they
  online or offline CPUs during the profiling"

* tag 'trace-fixes-v3.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  ftrace: Initialize the ftrace profiler for each possible cpu
2013-12-20 09:32:30 -08:00
Namhyung Kim
150e465ac9 perf report: Print session information only if --stdio is given
Move those print functions under "if (use_browser == 0)" so that they
don't interfere with TUI output.

Maybe they can handle other UIs later.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1387516278-17024-3-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-12-20 13:36:41 -03:00
Namhyung Kim
a421014180 perf report: Use pr_*() functions where applicable
There're some places printing messages to stdout/err directly.

It should be converted to use proper error printing functions instead.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1387516278-17024-2-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-12-20 13:34:53 -03:00
Kevin Hilman
cd15c51d6c I accidentally removed some mux code for omap4 that I thought was
dead code as omap4 has been booting with device tree only since
 v3.10. Turns out I also removed some display related mux code,
 so let's revert that except for the dead code parts.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.15 (GNU/Linux)
 
 iQIcBAABAgAGBQJSsd7KAAoJEBvUPslcq6Vz19gQAK6IyA51RxgyTF6ads5SyNny
 HAl7AO/O4yoverXibgdGEe3V6Caye8QbsAVE0qyZAVgtPCattCclRGYUGy8fcy00
 mV/KhW6EcQXxApU37f+6uyAm7RrkMPzTP6glqH9IllvFZYsOTNlt6W5+W0juW97n
 1xZMvx75bz6aiOvox5mRmSySr0+D3nHGfWhixmPAF09afUWlow2RGMZlPKtEZ27x
 wKEV6uxBjGrQoBKIkM1INwB6PzcYsoxwMVDfIzIiGU3Ck/59yVmKqT2UfaqkneXC
 poGA9FZ2eeSmh/0fxPue4gDRNYW5f7rjzjjf+x5kKTJi8+G5dX9TpaZhDd7cwvAy
 U0hnBWz6P3x0XRDzAAIuUeZP2S9JzedXbBKgAE3447r8MNH74TRA2y07ERpakS45
 DpyfepUcueEs9EMSgW/gPbG79cbdA9AiK9dPFVGchlvyk8eUD0KCRoBBPCuv99Z6
 mQzcSrQ7XBJV4zq7zomlsL9ERd8R9DjgF89ZWUeiQKbFFxceldkclaVX7s5m2H5h
 HzHYTKKNhcP+ZBwoX/IabRhE/N6hNMDKsrnz2GllVHfpocWRJXOZYnosVI/AS/iR
 5lLwIdsX6EQYHX1ZrVR8ROJ3R0ft52kNwS6bKt10hor0D/Y5DVpb2i9D34uYMjPj
 QBAIwd4yXIJhBwv+ldHp
 =gI+4
 -----END PGP SIGNATURE-----

Merge tag 'omap-for-v3.13/display-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes

I accidentally removed some mux code for omap4 that I thought was
dead code as omap4 has been booting with device tree only since
v3.10. Turns out I also removed some display related mux code,
so let's revert that except for the dead code parts.

* tag 'omap-for-v3.13/display-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (439 commits)
  Revert "ARM: OMAP2+: Remove legacy mux code for display.c"
  +Linux 3.13-rc4
2013-12-20 08:30:50 -08:00
Theodore Ts'o
f5a44db5d2 ext4: add explicit casts when masking cluster sizes
The missing casts can cause the high 64-bits of the physical blocks to
be lost.  Set up new macros which allows us to make sure the right
thing happen, even if at some point we end up supporting larger
logical block numbers.

Thanks to the Emese Revfy and the PaX security team for reporting this
issue.

Reported-by: PaX Team <pageexec@freemail.hu>
Reported-by: Emese Revfy <re.emese@gmail.com>                                 
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org
2013-12-20 09:29:35 -05:00
Helmut Schaa
443d20fd18 netfilter: nf_ct_timestamp: Fix BUG_ON after netns deletion
When having nf_conntrack_timestamp enabled deleting a netns
can lead to the following BUG being triggered:

[63836.660000] Kernel bug detected[#1]:
[63836.660000] CPU: 0 PID: 0 Comm: swapper Not tainted 3.10.18 #14
[63836.660000] task: 802d9420 ti: 802d2000 task.ti: 802d2000
[63836.660000] $ 0   : 00000000 00000000 00000000 00000000
[63836.660000] $ 4   : 00000001 00000004 00000020 00000020
[63836.660000] $ 8   : 00000000 80064910 00000000 00000000
[63836.660000] $12   : 0bff0002 00000001 00000000 0a0a0abe
[63836.660000] $16   : 802e70a0 85f29d80 00000000 00000004
[63836.660000] $20   : 85fb62a0 00000002 802d3bc0 85fb62a0
[63836.660000] $24   : 00000000 87138110
[63836.660000] $28   : 802d2000 802d3b40 00000014 871327cc
[63836.660000] Hi    : 000005ff
[63836.660000] Lo    : f2edd000
[63836.660000] epc   : 87138794 __nf_ct_ext_add_length+0xe8/0x1ec [nf_conntrack]
[63836.660000]     Not tainted
[63836.660000] ra    : 871327cc nf_conntrack_in+0x31c/0x7b8 [nf_conntrack]
[63836.660000] Status: 1100d403 KERNEL EXL IE
[63836.660000] Cause : 00800034
[63836.660000] PrId  : 0001974c (MIPS 74Kc)
[63836.660000] Modules linked in: ath9k ath9k_common pppoe ppp_async iptable_nat ath9k_hw ath pppox ppp_generic nf_nat_ipv4 nf_conntrack_ipv4 mac80211 ipt_MASQUERADE cfg80211 xt_time xt_tcpudp xt_state xt_quota xt_policy xt_pkttype xt_owner xt_nat xt_multiport xt_mark xh
[63836.660000] Process swapper (pid: 0, threadinfo=802d2000, task=802d9420, tls=00000000)
[63836.660000] Stack : 802e70a0 871323d4 00000005 87080234 802e70a0 86d2a840 00000000 00000000
[63836.660000] Call Trace:
[63836.660000] [<87138794>] __nf_ct_ext_add_length+0xe8/0x1ec [nf_conntrack]
[63836.660000] [<871327cc>] nf_conntrack_in+0x31c/0x7b8 [nf_conntrack]
[63836.660000] [<801ff63c>] nf_iterate+0x90/0xec
[63836.660000] [<801ff730>] nf_hook_slow+0x98/0x164
[63836.660000] [<80205968>] ip_rcv+0x3e8/0x40c
[63836.660000] [<801d9754>] __netif_receive_skb_core+0x624/0x6a4
[63836.660000] [<801da124>] process_backlog+0xa4/0x16c
[63836.660000] [<801d9bb4>] net_rx_action+0x10c/0x1e0
[63836.660000] [<8007c5a4>] __do_softirq+0xd0/0x1bc
[63836.660000] [<8007c730>] do_softirq+0x48/0x68
[63836.660000] [<8007c964>] irq_exit+0x54/0x70
[63836.660000] [<80060830>] ret_from_irq+0x0/0x4
[63836.660000] [<8006a9f8>] r4k_wait_irqoff+0x18/0x1c
[63836.660000] [<8009cfb8>] cpu_startup_entry+0xa4/0x104
[63836.660000] [<802eb918>] start_kernel+0x394/0x3ac
[63836.660000]
[63836.660000]
Code: 00821021  8c420000  2c440001 <00040336> 90440011  92350010  90560010  2485ffff  02a5a821
[63837.040000] ---[ end trace ebf660c3ce3b55e7 ]---
[63837.050000] Kernel panic - not syncing: Fatal exception in interrupt
[63837.050000] Rebooting in 3 seconds..

Fix this by not unregistering the conntrack extension in the per-netns
cleanup code.

This bug was introduced in (73f4001 netfilter: nf_ct_tstamp: move
initialization out of pernet_operations).

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2013-12-20 14:58:29 +01:00
Steven Whitehouse
582d2f7aed GFS2: Wait for async DIO in glock state changes
We need to wait for any outstanding DIO to complete in a couple
of situations. Firstly, in case we are changing out of deferred
mode (in inode_go_sync) where GLF_DIRTY will not be set. That
call could be prefixed with a test for gl_state == LM_ST_DEFERRED
but it doesn't seem worth it bearing in mind that the test for
outstanding DIO is very quick anyway, in the usual case that there
is none.

The second case is in inode_go_lock which will catch the cases
where we have a cached EX lock, but where we grant deferred locks
against it so that there is no glock state transistion. We only
need to wait if the state is not deferred, since DIO is valid
anyway in that state.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2013-12-20 10:42:08 +00:00
Steven Whitehouse
dfd11184d8 GFS2: Fix incorrect invalidation for DIO/buffered I/O
In patch 209806aba9 we allowed
local deferred locks to be granted against a cached exclusive
lock. That opened up a corner case which this patch now
fixes.

The solution to the problem is to check whether we have cached
pages each time we do direct I/O and if so to unmap, flush
and invalidate those pages. Since the glock state machine
normally does that for us, mostly the code will be a no-op.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2013-12-20 10:41:21 +00:00
Daniel Borkmann
540436c80e netfilter: nft_exthdr: call ipv6_find_hdr() with explicitly initialized offset
In nft's nft_exthdr_eval() routine we process IPv6 extension header
through invoking ipv6_find_hdr(), but we call it with an uninitialized
offset variable that contains some stack value. In ipv6_find_hdr()
we then test if the value of offset != 0 and call skb_header_pointer()
on that offset in order to map struct ipv6hdr into it. Fix it up by
initializing offset to 0 as it was probably intended to be.

Fixes: 96518518cc ("netfilter: add nftables")
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Cc: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2013-12-20 11:25:10 +01:00
Kees Cook
8779657d29 stackprotector: Introduce CONFIG_CC_STACKPROTECTOR_STRONG
This changes the stack protector config option into a choice of
"None", "Regular", and "Strong":

   CONFIG_CC_STACKPROTECTOR_NONE
   CONFIG_CC_STACKPROTECTOR_REGULAR
   CONFIG_CC_STACKPROTECTOR_STRONG

"Regular" means the old CONFIG_CC_STACKPROTECTOR=y option.

"Strong" is a new mode introduced by this patch. With "Strong" the
kernel is built with -fstack-protector-strong (available in
gcc 4.9 and later). This option increases the coverage of the stack
protector without the heavy performance hit of -fstack-protector-all.

For reference, the stack protector options available in gcc are:

-fstack-protector-all:
  Adds the stack-canary saving prefix and stack-canary checking
  suffix to _all_ function entry and exit. Results in substantial
  use of stack space for saving the canary for deep stack users
  (e.g. historically xfs), and measurable (though shockingly still
  low) performance hit due to all the saving/checking. Really not
  suitable for sane systems, and was entirely removed as an option
  from the kernel many years ago.

-fstack-protector:
  Adds the canary save/check to functions that define an 8
  (--param=ssp-buffer-size=N, N=8 by default) or more byte local
  char array. Traditionally, stack overflows happened with
  string-based manipulations, so this was a way to find those
  functions. Very few total functions actually get the canary; no
  measurable performance or size overhead.

-fstack-protector-strong
  Adds the canary for a wider set of functions, since it's not
  just those with strings that have ultimately been vulnerable to
  stack-busting. With this superset, more functions end up with a
  canary, but it still remains small compared to all functions
  with only a small change in performance. Based on the original
  design document, a function gets the canary when it contains any
  of:

    - local variable's address used as part of the right hand side
      of an assignment or function argument
    - local variable is an array (or union containing an array),
      regardless of array type or length
    - uses register local variables

  https://docs.google.com/a/google.com/document/d/1xXBH6rRZue4f296vGt9YQcuLVQHeE516stHwt8M9xyU

Find below a comparison of "size" and "objdump" output when built with
gcc-4.9 in three configurations:

  - defconfig
	11430641 kernel text size
	36110 function bodies

  - defconfig + CONFIG_CC_STACKPROTECTOR_REGULAR
	11468490 kernel text size (+0.33%)
	1015 of 36110 functions are stack-protected (2.81%)

  - defconfig + CONFIG_CC_STACKPROTECTOR_STRONG via this patch
	11692790 kernel text size (+2.24%)
	7401 of 36110 functions are stack-protected (20.5%)

With -strong, ARM's compressed boot code now triggers stack
protection, so a static guard was added. Since this is only used
during decompression and was never used before, the exposure
here is very small. Once it switches to the full kernel, the
stack guard is back to normal.

Chrome OS has been using -fstack-protector-strong for its kernel
builds for the last 8 months with no problems.

Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Shawn Guo <shawn.guo@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-mips@linux-mips.org
Cc: linux-arch@vger.kernel.org
Link: http://lkml.kernel.org/r/1387481759-14535-3-git-send-email-keescook@chromium.org
[ Improved the changelog and descriptions some more. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-12-20 09:38:40 +01:00
Kees Cook
19952a9203 stackprotector: Unify the HAVE_CC_STACKPROTECTOR logic between architectures
Instead of duplicating the CC_STACKPROTECTOR Kconfig and
Makefile logic in each architecture, switch to using
HAVE_CC_STACKPROTECTOR and keep everything in one place. This
retains the x86-specific bug verification scripts.

Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Shawn Guo <shawn.guo@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-mips@linux-mips.org
Cc: linux-arch@vger.kernel.org
Link: http://lkml.kernel.org/r/1387481759-14535-2-git-send-email-keescook@chromium.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-12-20 09:38:40 +01:00
Alex Deucher
e2f6c88fb9 drm/radeon: fix asic gfx values for scrapper asics
Fixes gfx corruption on certain TN/RL parts.

bug:
https://bugs.freedesktop.org/show_bug.cgi?id=60389

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
2013-12-19 19:41:46 -05:00
Wang Weidong
965cdea825 dccp: catch failed request_module call in dccp_probe init
Check the return value of request_module during dccp_probe initialisation,
bail out if that call fails.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: Wang Weidong <wangweidong1@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-19 19:25:50 -05:00
David S. Miller
b1aca94efa Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net
Jeff Kirsher says:

====================
Intel Wired LAN Driver Updates

This series contains updates to net, ixgbe and e1000e.

David provides compiler fixes for e1000e.

Don provides a fix for ixgbe to resolve a compile warning.

John provides a fix to net where it is useful to be able to walk all
upper devices when bringing a device online where the RTNL lock is held.
In this case, it is safe to walk the all_adj_list because the RTNL lock is
used to protect the write side as well.  This patch adds a check to see
if the RTNL lock is held before throwing a warning in
netdev_all_upper_get_next_dev_rcu().
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-19 19:23:54 -05:00
Leigh Brown
1a1f20bc9d net: mvmdio: fix interrupt timeout handling
This version corrects the whitespace issue.

orion_mdio_wait_ready uses wait_event_timeout to wait for the
SMI interrupt to fire.  wait_event_timeout waits for between
"timeout - 1" and "timeout" jiffies.  In this case a 1ms timeout
when HZ is 1000 results in a wait of 0 to 1 jiffies, causing
premature timeouts.

This fix ensures a minimum timeout of 2 jiffies, ensuring
wait_event_timeout will always wait at least 1 jiffie.

Issue reported by Nicolas Schichan.

Tested-by: Nicolas Schichan <nschichan@freebox.fr>
Signed-off-by: Leigh Brown <leigh@solinno.co.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-19 19:20:44 -05:00
Betty Dall
a4f6363476 atl1c: Check return from pci_find_ext_capability() in atl1c_reset_pcie()
The function atl1c_reset_pcie() does not check the return from
pci_find_ext_cabability() where it is getting the postion of the
PCI_EXT_CAP_ID_ERR. It is possible for the return to be 0.

Signed-off-by: Betty Dall <betty.dall@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-19 19:14:42 -05:00
Li RongQing
24f5b855e1 ipv6: always set the new created dst's from in ip6_rt_copy
ip6_rt_copy only sets dst.from if ort has flag RTF_ADDRCONF and RTF_DEFAULT.
but the prefix routes which did get installed by hand locally can have an
expiration, and no any flag combination which can ensure a potential from
does never expire, so we should always set the new created dst's from.

This also fixes the new created dst is always expired since the ort, which
is created by RA, maybe has RTF_EXPIRES and RTF_ADDRCONF, but no RTF_DEFAULT.

Suggested-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
CC: Gao feng <gaofeng@cn.fujitsu.com>
Signed-off-by: Li RongQing <roy.qing.li@gmail.com>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-19 18:35:21 -05:00
Kevin Hilman
5b8314a988 Couple of updates to MAINTAINERS file for Keystone
- Add git tree information
 - Add clock drivers entry
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJSr3LGAAoJEHJsHOdBp5c/kV8QALpVFfHFLw2RWn3pZyhKor4r
 8Mix72f886j7Fxao/9+xutW6+G4QVzNb/Bbi5EwOCf3xaFStO9ZJMMTD7Irpfz3/
 FKRlaKxi23AuTrOvrT1dWT0EV4/Zu1tvoP6G7ElQ8RkYcVHdAxx0qa8Sjoe1F6yE
 UwzlXC+uduXffw6PLZyxzDquLR0eJMNFO52C33bJ2ZYQfczwdBU1Qdm8wvj+HrWM
 L+iJFVVFhnp5VpQk40JNtzMbleJPBOR/XhCQQnwb7UqZ3A5JZgxIULvdFXbEUq5B
 1vMuVc592UruxW1W9IG9fafAHYmOU0VR1WGiCy3+nVZrdHRXl6DqM6h+MAPyolXE
 K3KtnGz+l5Rq4LfwxIgnMpUZL+ezUVqUFKkoFVCRmulQZlKvEG2z3bQDzTRenHBN
 vM0Bk2E0W22W+MFvD3CThBxmTgS61rhZXBAVCGx57qIFnP5o02wCjb/wvuELwoXo
 Z7RlLaTfhtDGtPGOP0ePjjdwmBdEE47AQmgMXI4Rpvz0Ap3n4hf8e67d2IG0JjJL
 6YMyMxJxBFkBznp+BNEMcQKdP55Rs3XHeCvbwOlfMShHyJBl5eT6N7Y/WTTANNFz
 3Ow8x651uX/nVryOFs9nJBGpOEEVern515wc8cqHmrciYZZQKgkZ8w42YPhOK8/j
 iBraw4OZojqHyRLmP/VA
 =xMe6
 -----END PGP SIGNATURE-----

Merge tag 'keystone/maintainer-file' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone into fixes

From Santosh Shilimkar:
Couple of updates to MAINTAINERS file for Keystone

- Add git tree information
- Add clock drivers entry

* tag 'keystone/maintainer-file' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone:
  MAINTAINERS: Add keystone clock drivers
  MAINTAINERS: Add keystone git tree information

Signed-off-by: Kevin Hilman <khilman@linaro.org>
2013-12-19 15:13:16 -08:00
Eric Dumazet
7a2a84518c net: fec: fix potential use after free
skb_tx_timestamp(skb) should be called _before_ TX completion
has a chance to trigger, otherwise it is too late and we access
freed memory.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Fixes: de5fb0a053 ("net: fec: put tx to napi poll function to fix dead lock")
Cc: Frank Li <Frank.Li@freescale.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Acked-by: Frank Li <Frank.Li@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-19 18:03:25 -05:00
Nicholas Bellinger
dcd211997d qla2xxx: Fix scsi_host leak on qlt_lport_register callback failure
This patch fixes a possible scsi_host reference leak in qlt_lport_register(),
when a non zero return from the passed (*callback) does not call drop the
local reference via scsi_host_put() before returning.

This currently does not effect existing tcm_qla2xxx code as the passed callback
will never fail, but fix this up regardless for future code.

Cc: Chad Dupuis <chad.dupuis@qlogic.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-12-19 14:50:17 -08:00
Andy Grover
de06875f08 target: Remove extra percpu_ref_init
lun->lun_ref is also initialized in core_tpg_post_addlun, so it doesn't
need to be done in core_tpg_setup_virtual_lun0.

(nab: Drop left-over percpu_ref_cancel_init in failure path)

Signed-off-by: Andy Grover <agrover@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-12-19 14:49:54 -08:00
Arnaldo Carvalho de Melo
cc22e575a6 perf symbols: Add 'machine' member to struct addr_location
The addr_location struct should fully qualify an address, and to do that
it should have in it the machine where the thread was found.

Thus all functions that receive an addr_location now don't need to also
receive a 'machine', those functions just need to access al->machine
instead, just like it does with the other parts of an address location:
al->thread, al->map, etc.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-o51iiee7vyq4r3k362uvuylg@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-12-19 17:38:27 -03:00
Jan Beulich
fce7d3bfc0 x86/efi: Don't select EFI from certain special ACPI drivers
Commit 7ea6c6c1 ("Move cper.c from drivers/acpi/apei to
drivers/firmware/efi") results in CONFIG_EFI being enabled even
when the user doesn't want this. Since ACPI APEI used to build
fine without UEFI (and as far as I know also has no functional
depency on it), at least in that case using a reverse dependency
is wrong (and a straight one isn't needed).

Whether the same is true for ACPI_EXTLOG I don't know - if there
is a functional dependency, it should depend on EFI rather than
selecting it. It certainly has (currently) no build dependency.

Adjust Kconfig and build logic so that the bad dependency gets
avoided.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Tony Luck <tony.luck@intel.com>
Cc: Matt Fleming <matt.fleming@intel.com>
Link: http://lkml.kernel.org/r/52AF1EBC020000780010DBF9@nat28.tlf.novell.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-12-19 21:32:46 +01:00
H. Peter Anvin
7d590cca7c x86, idle: Add memory barriers around clflush in mwait_play_dead()
For consistency with mwait_idle_with_hints().  Not sure they help, but
they really won't hurt...

Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Len Brown <len.brown@intel.com>
Link: http://lkml.kernel.org/r/CA%2B55aFzGxcML7j8CEvQPYzh0W81uVoAAVmGctMOUZ7CZ1yYd2A@mail.gmail.com
2013-12-19 12:30:03 -08:00
Michal Schmidt
c047e07073 bnx2x: downgrade "valid ME register value" message level
"valid ME register value" is not an error. It should be logged for
debugging only.

Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Acked-by: Yuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-19 15:16:16 -05:00
Salva Peiró
8e3fbf8704 hamradio/yam: fix info leak in ioctl
The yam_ioctl() code fails to initialise the cmd field
of the struct yamdrv_ioctl_cfg. Add an explicit memset(0)
before filling the structure to avoid the 4-byte info leak.

Signed-off-by: Salva Peiró <speiro@ai2.upv.es>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-19 15:09:38 -05:00
Arnaldo Carvalho de Melo
8b640cc4c5 perf mem: Remove unused parameter from dump_raw_samples()
The 'evsel' parameter is not used, ditch it, reducing the function
signature.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-kx9temzdcy7mk2edya9c1tdu@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-12-19 17:03:39 -03:00
Wenliang Fan
e9db5c21d3 drivers/net/hamradio: Integer overflow in hdlcdrv_ioctl()
The local variable 'bi' comes from userspace. If userspace passed a
large number to 'bi.data.calibrate', there would be an integer overflow
in the following line:
	s->hdlctx.calibrate = bi.data.calibrate * s->par.bitrate / 16;

Signed-off-by: Wenliang Fan <fanwlexca@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-19 15:02:14 -05:00
Wei Yongjun
0c8d087c04 xen-netback: fix some error return code
'err' is overwrited to 0 after maybe_pull_tail() call, so the error
code was not set if skb_partial_csum_set() call failed. Fix to return
error -EPROTO from those error handling case instead of 0.

Fixes: d52eb0d46f ('xen-netback: make sure skb linear area covers checksum field')
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-19 14:58:47 -05:00
H. Peter Anvin
7e98b71920 x86, idle: Use static_cpu_has() for CLFLUSH workaround, add barriers
Use static_cpu_has() to conditionalize the CLFLUSH workaround, and add
memory barriers around it since the documentation is explicit that
CLFLUSH is only ordered with respect to MFENCE.

Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Len Brown <len.brown@intel.com>
Link: http://lkml.kernel.org/r/CA%2B55aFzGxcML7j8CEvQPYzh0W81uVoAAVmGctMOUZ7CZ1yYd2A@mail.gmail.com
2013-12-19 11:58:16 -08:00
Daniel Borkmann
b1aac815c0 net: inet_diag: zero out uninitialized idiag_{src,dst} fields
Jakub reported while working with nlmon netlink sniffer that parts of
the inet_diag_sockid are not initialized when r->idiag_family != AF_INET6.
That is, fields of r->id.idiag_src[1 ... 3], r->id.idiag_dst[1 ... 3].

In fact, it seems that we can leak 6 * sizeof(u32) byte of kernel [slab]
memory through this. At least, in udp_dump_one(), we allocate a skb in ...

  rep = nlmsg_new(sizeof(struct inet_diag_msg) + ..., GFP_KERNEL);

... and then pass that to inet_sk_diag_fill() that puts the whole struct
inet_diag_msg into the skb, where we only fill out r->id.idiag_src[0],
r->id.idiag_dst[0] and leave the rest untouched:

  r->id.idiag_src[0] = inet->inet_rcv_saddr;
  r->id.idiag_dst[0] = inet->inet_daddr;

struct inet_diag_msg embeds struct inet_diag_sockid that is correctly /
fully filled out in IPv6 case, but for IPv4 not.

So just zero them out by using plain memset (for this little amount of
bytes it's probably not worth the extra check for idiag_family == AF_INET).

Similarly, fix also other places where we fill that out.

Reported-by: Jakub Zawadzki <darkjames-ws@darkjames.pl>
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-19 14:55:52 -05:00
Peter Zijlstra
1682425539 x86, acpi, idle: Restructure the mwait idle routines
People seem to delight in writing wrong and broken mwait idle routines;
collapse the lot.

This leaves mwait_play_dead() the sole remaining user of __mwait() and
new __mwait() users are probably doing it wrong.

Also remove __sti_mwait() as its unused.

Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Jacob Jun Pan <jacob.jun.pan@linux.intel.com>
Cc: Mike Galbraith <bitbucket@online.de>
Cc: Len Brown <lenb@kernel.org>
Cc: Rui Zhang <rui.zhang@intel.com>
Acked-by: Rafael Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20131212141654.616820819@infradead.org
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-12-19 11:54:44 -08:00
Len Brown
40e2d7f9b5 x86 idle: Repair large-server 50-watt idle-power regression
Linux 3.10 changed the timing of how thread_info->flags is touched:

	x86: Use generic idle loop
	(7d1a941731)

This caused Intel NHM-EX and WSM-EX servers to experience a large number
of immediate MONITOR/MWAIT break wakeups, which caused cpuidle to demote
from deep C-states to shallow C-states, which caused these platforms
to experience a significant increase in idle power.

Note that this issue was already present before the commit above,
however, it wasn't seen often enough to be noticed in power measurements.

Here we extend an errata workaround from the Core2 EX "Dunnington"
to extend to NHM-EX and WSM-EX, to prevent these immediate
returns from MWAIT, reducing idle power on these platforms.

While only acpi_idle ran on Dunnington, intel_idle
may also run on these two newer systems.
As of today, there are no other models that are known
to need this tweak.

Link: http://lkml.kernel.org/r/CAJvTdK=%2BaNN66mYpCGgbHGCHhYQAKx-vB0kJSWjVpsNb_hOAtQ@mail.gmail.com
Signed-off-by: Len Brown <len.brown@intel.com>
Link: http://lkml.kernel.org/r/baff264285f6e585df757d58b17788feabc68918.1387403066.git.len.brown@intel.com
Cc: <stable@vger.kernel.org> # 3.12.x, 3.11.x, 3.10.x
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-12-19 11:47:39 -08:00
Arnaldo Carvalho de Melo
8853a1b762 perf scripting perl: Shorten function signatures
Removing unused parameters.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-b7r7o80o2xwwtlzgqxv50foe@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-12-19 16:39:31 -03:00
Arnaldo Carvalho de Melo
b7fff6b5f9 perf scripting python: Shorten function signatures
Removing unused parameters.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-fspmnjadohrik8uvhytyu8lp@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-12-19 16:34:52 -03:00
Arnaldo Carvalho de Melo
3184c47cb8 perf ui browser: Remove misplaced __maybe_unused
The 'browser' arg _is_ used, so ditch the misplaced attribute.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-bo4dabkip5iikhk3x384ac46@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-12-19 16:25:17 -03:00
Arnaldo Carvalho de Melo
28b21393fa perf report: Rename 'perf_report' to 'report'
Reduce typing, functions use class__method convention, so unlikely to
clash with other libraries.

This actually was discussed in the "Link:" referenced message below.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20131112113427.GA4053@ghostprotocols.net
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-12-19 16:19:01 -03:00
Jiri Olsa
4c7aafc950 tools lib traceevent: Use global 'O' processing code
Using global 'O' processing code because it's already setup due to the
scripts/Makefile.include include.

Using global variable OUTPUT instead of the local BUILD_OUTPUT.

Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1387460527-15030-10-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-12-19 16:18:12 -03:00
Jiri Olsa
4a953c716a tools lib traceevent: Use global QUIET_CLEAN build output
Using global QUIET_CLEAN build output variable and so we could have only
single clean message:

  CLEAN libtraceevent

Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1387460527-15030-9-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-12-19 16:18:11 -03:00