That way a single flip of phys_addr_t to 64 bit ensures all places
dealing with physical addresses get correct data
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Currently we split symbols based on the map comparison, but symbols are stored
within dso objects and maps could point into same dso objects (kernel maps).
Hence we could end up changing rbtree we are currently iterating and mess it
up. It's easily reproduced on s390x by running:
$ perf record -a -- sleep 3
$ perf buildid-list -i perf.data --with-hits
The fix is to compare dso objects instead.
Reported-by: Michael Petlan <mpetlan@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20151026135130.GA26003@krava.brq.redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch allows perf record setting event's attr.inherit bit by
config terms like:
# perf record -e cycles/no-inherit/ ...
# perf record -e cycles/inherit/ ...
So user can control inherit bit for each event separately.
In following example, a.out fork()s in main then do some complex
CPU intensive computations in both of its children.
Basic result with and without inherit:
# perf record -e cycles -e instructions ./a.out
[ perf record: Woken up 9 times to write data ]
[ perf record: Captured and wrote 2.205 MB perf.data (47920 samples) ]
# perf report --stdio
# ...
# Samples: 23K of event 'cycles'
# Event count (approx.): 23641752891
...
# Samples: 24K of event 'instructions'
# Event count (approx.): 30428312415
# perf record -i -e cycles -e instructions ./a.out
[ perf record: Woken up 5 times to write data ]
[ perf record: Captured and wrote 1.111 MB perf.data (24019 samples) ]
...
# Samples: 12K of event 'cycles'
# Event count (approx.): 11699501775
...
# Samples: 12K of event 'instructions'
# Event count (approx.): 15058023559
Cancel inherit for one event when globally enable:
# perf record -e cycles/no-inherit/ -e instructions ./a.out
[ perf record: Woken up 7 times to write data ]
[ perf record: Captured and wrote 1.660 MB perf.data (36004 samples) ]
...
# Samples: 12K of event 'cycles/no-inherit/'
# Event count (approx.): 11895759282
...
# Samples: 24K of event 'instructions'
# Event count (approx.): 30668000441
Enable inherit for one event when globally disable:
# perf record -i -e cycles/inherit/ -e instructions ./a.out
[ perf record: Woken up 7 times to write data ]
[ perf record: Captured and wrote 1.654 MB perf.data (35868 samples) ]
...
# Samples: 23K of event 'cycles/inherit/'
# Event count (approx.): 23285400229
...
# Samples: 11K of event 'instructions'
# Event count (approx.): 14969050259
Committer note:
One can check if the bit was set, in addition to seeing the result in
the perf.data file size as above by doing one of:
# perf record -e cycles -e instructions -a usleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.911 MB perf.data (63 samples) ]
# perf evlist -v
cycles: size: 112, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|ID|CPU|PERIOD, read_format: ID, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1
instructions: size: 112, config: 0x1, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|ID|CPU|PERIOD, read_format: ID, disabled: 1, inherit: 1, freq: 1, sample_id_all: 1, exclude_guest: 1
#
So, the inherit bit was set in both, now, if we disable it globally using
--no-inherit:
# perf record --no-inherit -e cycles -e instructions -a usleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.910 MB perf.data (56 samples) ]
# perf evlist -v
cycles: size: 112, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|ID|CPU|PERIOD, read_format: ID, disabled: 1, mmap: 1, comm: 1, freq: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1
instructions: size: 112, config: 0x1, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|ID|CPU|PERIOD, read_format: ID, disabled: 1, freq: 1, sample_id_all: 1, exclude_guest: 1
No inherit bit set, then disabling it and setting just on the cycles event:
# perf record --no-inherit -e cycles/inherit/ -e instructions -a usleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.909 MB perf.data (48 samples) ]
# perf evlist -v
cycles/inherit/: size: 112, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|ID|CPU|PERIOD, read_format: ID, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1
instructions: size: 112, config: 0x1, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|ID|CPU|PERIOD, read_format: ID, disabled: 1, freq: 1, sample_id_all: 1, exclude_guest: 1
#
We can see it as well in by using a more verbose level of debug messages in
the tool that sets up the perf_event_attr, 'perf record' in this case:
[root@zoo ~]# perf record -vv --no-inherit -e cycles/inherit/ -e instructions -a usleep 1
------------------------------------------------------------
perf_event_attr:
size 112
{ sample_period, sample_freq } 4000
sample_type IP|TID|TIME|ID|CPU|PERIOD
read_format ID
disabled 1
inherit 1
mmap 1
comm 1
freq 1
task 1
sample_id_all 1
exclude_guest 1
mmap2 1
comm_exec 1
------------------------------------------------------------
sys_perf_event_open: pid -1 cpu 0 group_fd -1 flags 0x8
sys_perf_event_open: pid -1 cpu 1 group_fd -1 flags 0x8
sys_perf_event_open: pid -1 cpu 2 group_fd -1 flags 0x8
sys_perf_event_open: pid -1 cpu 3 group_fd -1 flags 0x8
------------------------------------------------------------
perf_event_attr:
size 112
config 0x1
{ sample_period, sample_freq } 4000
sample_type IP|TID|TIME|ID|CPU|PERIOD
read_format ID
disabled 1
freq 1
sample_id_all 1
exclude_guest 1
------------------------------------------------------------
sys_perf_event_open: pid -1 cpu 0 group_fd -1 flags 0x8
<SNIP>
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1446029705-199659-2-git-send-email-wangnan0@huawei.com
[ s/u64/bool/ for the perf_evsel_config_term inherit field - jolsa]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Implement kmap* API for ARC.
This enables
- permanent kernel maps (pkmaps): :kmap() API
- fixmap : kmap_atomic()
We use a very simple/uniform approach for both (unlike some of the other
arches). So fixmap doesn't use the customary compile time address stuff.
The important semantic is sleep'ability (pkmap) vs. not (fixmap) which
the API guarantees.
Note that this patch only enables highmem for subsequent PAE40 support
as there is no real highmem for ARC in pure 32-bit paradigm as explained
below.
ARC has 2:2 address split of the 32-bit address space with lower half
being translated (virtual) while upper half unstranslated
(0x8000_0000 to 0xFFFF_FFFF). kernel itself is linked at base of
unstranslated space (i.e. 0x8000_0000 onwards), which is mapped to say
DDR 0x0 by external Bus Glue logic (outside the core). So kernel can
potentially access 1.75G worth of memory directly w/o need for highmem.
(the top 256M is taken by uncached peripheral space from 0xF000_0000 to
0xFFFF_FFFF)
In PAE40, hardware can address memory beyond 4G (0x1_0000_0000) while
the logical/virtual addresses remain 32-bits. Thus highmem is required
for kernel proper to be able to access these pages for it's own purposes
(user space is agnostic to this anyways).
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Before we plug in highmem support, some of code needs to be ready for it
- copy_user_highpage() needs to be using the kmap_atomic API
- mk_pte() can't assume page_address()
- do_page_fault() can't assume VMALLOC_END is end of kernel vaddr space
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
- Move the verbosity knob from .data to .bss by using inverted logic
- No need to readout PD1 descriptor
- clip the non pfn bits of PD0 to avoid clipping inside the loop
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Mapping a large range of foreign GFNs can take a long time, add a
reschedule point after each batch of 16 GFNs.
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Recent GDB (at least on a vanilla Debian box) looks for debug information in
/usr/lib/debug/.build-id/nn/nnnnnnn
where nn/nnnnnn is the build-id of the stripped ELF binary. This is
documented here:
https://sourceware.org/gdb/onlinedocs/gdb/Separate-Debug-Files.html
This was not working in perf because we didn't read the build id until
AFTER we searched for the separate debug information file. This patch
reads the build ID and THEN does the search.
Signed-off-by: Dima Kogan <dima@secretsauce.net>
Link: http://lkml.kernel.org/r/87si6pfwz4.fsf@secretsauce.net
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This was benign, but wrong. The build-id should live in a char[], not a char*[]
Signed-off-by: Dima Kogan <dima@secretsauce.net>
Link: http://lkml.kernel.org/r/87si6pfwz4.fsf@secretsauce.net
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
bdi_split_work_to_wbs() uses list_for_each_entry_rcu_continue()
to walk @bdi->wb_list. To set up the initial iteration
condition, it uses list_entry_rcu() to calculate the entry
pointer corresponding to the list head; however, this isn't an
actual RCU dereference and using list_entry_rcu() for it ended
up breaking a proposed list_entry_rcu() change because it was
feeding an non-lvalue pointer into the macro.
Don't use the RCU variant for simple pointer offsetting. Use
list_entry() instead.
Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Darren Hart <dvhart@linux.intel.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Dipankar Sarma <dipankar@in.ibm.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Patrick Marlier <patrick.marlier@gmail.com>
Cc: Paul McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: pranith kumar <bobby.prani@gmail.com>
Link: http://lkml.kernel.org/r/20151027051939.GA19355@mtj.duckdns.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Commit:
0f96a99dab ("efi: Add "efi_fake_mem" boot option")
introduced the following warning message:
drivers/firmware/efi/fake_mem.c:186:20: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
new_memmap_phy was defined as a u64 value and cast to void*,
causing a int-to-pointer-cast warning on x86 32-bit builds.
However, since the void* type is inappropriate for a physical
address, the definition of struct efi_memory_map::phys_map has
been changed to phys_addr_t in the previous patch, and so the
cast can be dropped entirely.
This patch also changes the type of the "new_memmap_phy"
variable from "u64" to "phys_addr_t" to align with the types of
memblock_alloc() and struct efi_memory_map::phys_map.
Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
[ Removed void* cast, updated commit log]
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: kamezawa.hiroyu@jp.fujitsu.com
Cc: linux-efi@vger.kernel.org
Cc: matt.fleming@intel.com
Link: http://lkml.kernel.org/r/1445593697-1342-2-git-send-email-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
We have been getting away with using a void* for the physical
address of the UEFI memory map, since, even on 32-bit platforms
with 64-bit physical addresses, no truncation takes place if the
memory map has been allocated by the firmware (which only uses
1:1 virtually addressable memory), which is usually the case.
However, commit:
0f96a99dab ("efi: Add "efi_fake_mem" boot option")
adds code that clones and modifies the UEFI memory map, and the
clone may live above 4 GB on 32-bit platforms.
This means our use of void* for struct efi_memory_map::phys_map has
graduated from 'incorrect but working' to 'incorrect and
broken', and we need to fix it.
So redefine struct efi_memory_map::phys_map as phys_addr_t, and
get rid of a bunch of casts that are now unneeded.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: izumi.taku@jp.fujitsu.com
Cc: kamezawa.hiroyu@jp.fujitsu.com
Cc: linux-efi@vger.kernel.org
Cc: matt.fleming@intel.com
Link: http://lkml.kernel.org/r/1445593697-1342-1-git-send-email-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
With prev fixes, all cores now start via common entry point @stext which
already calls EARLY_CPU_SETUP for all cores - so no need to invoke it
again
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
MCIP now registers it's own per cpu setup routine (for IPI IRQ request)
using smp_ops.init_irq_cpu().
So no need for platforms to do that. This now completely decouples
platforms from MCIP.
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Note this is not part of platform owned static machine_desc,
but more of device owned plat_smp_ops (rather misnamed) which a IPI
provider or some such typically defines.
This will help us seperate out the IPI registration from platform
specific init_cpu_smp() into device specific init_irq_cpu()
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
MCIP now registers it's own probe callback with smp_ops.init_early_smp()
which is called by ARC common code, so no need for platforms to do that.
This decouples the platforms and MCIP and helps confine MCIP details
to it's own file.
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
This adds a platform agnostic early SMP init hook which is called on
Master core before calling setup_processor()
setup_arch()
smp_init_cpus()
smp_ops.init_early_smp()
...
setup_processor()
How this helps:
- Used for one time init of certain SMP centric IP blocks, before
calling setup_processor() which probes various bits of core,
possibly including this block
- Currently platforms need to call this IP block init from their
init routines, which doesn't make sense as this is specific to ARC
core and not platform and otherwise requires copy/paste in all
(and hence a possible point of failure)
e.g. MCIP init is called from 2 platforms currently (axs10x and sim)
which will go away once we have this.
This change only adds the hooks but they are empty for now. Next commit
will populate them and remove the explicit init calls from platforms.
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
These are not in use for ARC platforms. Moreover DT mechanims exist to
probe them w/o explicit platform calls.
- clocksource drivers can use CLOCKSOURCE_OF_DECLARE()
- intc IRQCHIP_DECLARE() calls + cascading inside DT allows external
intc to be probed automatically
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
The reason this was not done so far was lack of genuine IPI_IRQ for
ARC700, as we don't have a SMP version of core yet (which might change
soon thx to EZChip). Nevertheles to increase the build coverage, we
need to allow CONFIG_SMP for ARC700 and still be able to run it on a
UP platform (nsim or AXS101) with a UP Device Tree (SMP-on-UP)
The build itself requires some define for IPI_IRQ and even a dummy
value is fine since that code won't run anyways.
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
For Run-on-reset, non masters need to spin wait. For Halt-on-reset they
can jump to entry point directly.
Also while at it, made reset vector handler as "the" entry point for
kernel including host debugger based boot (which uses the ELF header
entry point)
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
- powerpc/dma: dma_set_coherent_mask() should not be GPL only from Ben
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=sFFh
-----END PGP SIGNATURE-----
Merge tag 'powerpc-4.3-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fix from Michael Ellerman:
- powerpc/dma: dma_set_coherent_mask() should not be GPL only from Ben
* tag 'powerpc-4.3-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/dma: dma_set_coherent_mask() should not be GPL only
The sysfs policy directory is postfixed currently with the CPU number
for which the policy was created, which isn't necessarily the first CPU
in related_cpus mask.
To make it more consistent and predictable, lets postfix the policy with
the first cpu in related-cpus mask.
Suggested-by: Saravana Kannan <skannan@codeaurora.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Saravana Kannan <skannan@codeaurora.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The cpufreq sysfs interface had been a bit inconsistent as one of the
CPUs for a policy had a real directory within its sysfs 'cpuX' directory
and all other CPUs had links to it. That also made the code a bit
complex as we need to take care of moving the sysfs directory if the CPU
containing the real directory is getting physically hot-unplugged.
Solve this by creating 'policyX' directories (per-policy) in
/sys/devices/system/cpu/cpufreq/ directory, where X is the CPU for which
the policy was first created.
This also removes the need of keeping kobj_cpu and we can remove it now.
Suggested-by: Saravana Kannan <skannan@codeaurora.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Saravana Kannan <skannan@codeaurora.org>
Acked-by: is more of a general agreement from the person that he is
Reviewed-by: is a more strict tag and implies that the reviewer has
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
They don't do anything special now, remove the unnecessary wrapper.
Reviewed-by: Saravana Kannan <skannan@codeaurora.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Later patches will need to create policy specific directories in
/sys/devices/system/cpu/cpufreq/ directory and so the cpufreq directory
wouldn't be ever empty.
And so no fun creating/destroying it on need basis anymore. Create it
once on system boot.
Reviewed-by: Saravana Kannan <skannan@codeaurora.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
->related_cpus is empty at this point of time and copying ->cpus to it
or orring ->related_cpus with ->cpus would result in the same value. But
cpumask_copy makes it rather clear.
Reviewed-by: Saravana Kannan <skannan@codeaurora.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
'timer_mutex' is required to sync work-handlers of policy->cpus.
update_sampling_rate() is just canceling the works and queuing them
again. This isn't protecting anything at all in update_sampling_rate()
and is not gonna be of any use.
Even if a work-handler is already running for a CPU,
cancel_delayed_work_sync() will wait for it to finish.
Drop these unnecessary locks.
Reviewed-by: Preeti U Murthy <preeti@linux.vnet.ibm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Per http://www.nvmexpress.org/resources/linux-driver-information/, the
old nvme git repo is stale. Updating MAINTAINERS to the Supported
target currently used by the community.
Signed-off-by: Jay Freyensee <james_p_freyensee@linux.intel.com>
Updated by me to add Keith as the maintainer, me as the co-maintainer.
Signed-off-by: Jens Axboe <axboe@fb.com>
This fixes a build error that seems to be toochain
dependent (Not seen with gcc v5.1):
In file included from net/nfc/nci/rsp.c:36:0:
net/nfc/nci/rsp.c: In function ‘nci_rsp_packet’:
include/net/nfc/nci_core.h:355:12: error: inlining failed in call to
always_inline ‘nci_prop_rsp_packet’: function body not available
inline int nci_prop_rsp_packet(struct nci_dev *ndev, __u16 opcode,
Signed-off-by: Robert Dolca <robert.dolca@intel.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
When turning this from inline to an exported function I was a bit
over-eager and made it GPL only. This prevents the use of pretty much
all non-GPL PCI driver which is a bit over the top. Let's bring it
back in line with other architecture.
Fixes: 817820b022 ("powerpc/iommu: Support "hybrid" iommu/direct DMA ops for coherent_mask < dma_mask")
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Measure latency does by itself contribute to an increased latency, thus we
should avoid it when it isn't needed.
By merging the latency measurements for the ->save_state() and the
->stop() callbacks, we get one measurement instead of two and we get one
value to store instead of two. Let's also apply the likewise change for
the ->start() and ->restore_state() callbacks.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Lina Iyer <lina.iyer@linaro.org>
Acked-by: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Measure latency does by itself contribute to an increased latency, thus we
should avoid it when it isn't needed.
Genpd measures latencies in the system PM phase for the ->start|stop()
callbacks and is thus affecting the system PM suspend/resume time.
Moreover these latencies are validated only at runtime PM suspend/resume.
To this reasoning, let's decide to leave these measurements out of the
system PM phase. There should be plenty of occasions during runtime PM to
perform these measurements anyway.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Lina Iyer <lina.iyer@linaro.org>
Acked-by: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
If an architecture's main Kconfig file doesn't include
kernel/power/Kconfig, but CONFIG_PM=y and HAVE_CLK=y (e.g. m68knommu
allmodconfig):
drivers/base/power/clock_ops.c: In function ‘__pm_clk_add’:
drivers/base/power/clock_ops.c:106: error: ‘struct pm_subsys_data’ has no member named ‘clock_list’
drivers/base/power/clock_ops.c: At top level:
drivers/base/power/clock_ops.c:120: error: redefinition of ‘pm_clk_add’
include/linux/pm_clock.h:64: error: previous definition of ‘pm_clk_add’ was here
drivers/base/power/clock_ops.c:135: error: redefinition of ‘pm_clk_add_clk’
include/linux/pm_clock.h:69: error: previous definition of ‘pm_clk_add_clk’ was here
drivers/base/power/clock_ops.c:171: error: redefinition of ‘pm_clk_remove’
include/linux/pm_clock.h:73: error: previous definition of ‘pm_clk_remove’ was here
drivers/base/power/clock_ops.c: In function ‘pm_clk_remove’:
drivers/base/power/clock_ops.c:180: error: ‘struct pm_subsys_data’ has no member named ‘clock_list’
drivers/base/power/clock_ops.c:180: error: ‘struct pm_subsys_data’ has no member named ‘clock_list’
drivers/base/power/clock_ops.c: At top level:
drivers/base/power/clock_ops.c:207: error: redefinition of ‘pm_clk_init’
include/linux/pm_clock.h:54: error: previous definition of ‘pm_clk_init’ was here
drivers/base/power/clock_ops.c: In function ‘pm_clk_init’:
drivers/base/power/clock_ops.c:210: error: ‘struct pm_subsys_data’ has no member named ‘clock_list’
drivers/base/power/clock_ops.c: At top level:
drivers/base/power/clock_ops.c:221: error: redefinition of ‘pm_clk_create’
include/linux/pm_clock.h:57: error: previous definition of ‘pm_clk_create’ was here
drivers/base/power/clock_ops.c:234: error: redefinition of ‘pm_clk_destroy’
include/linux/pm_clock.h:61: error: previous definition of ‘pm_clk_destroy’ was here
drivers/base/power/clock_ops.c: In function ‘pm_clk_destroy’:
drivers/base/power/clock_ops.c:246: error: ‘struct pm_subsys_data’ has no member named ‘clock_list’
drivers/base/power/clock_ops.c:246: error: ‘struct pm_subsys_data’ has no member named ‘clock_list’
drivers/base/power/clock_ops.c: At top level:
drivers/base/power/clock_ops.c:263: error: expected identifier or ‘(’ before ‘void’
drivers/base/power/clock_ops.c:263: error: expected ‘)’ before numeric constant
drivers/base/power/clock_ops.c:293: error: expected identifier or ‘(’ before ‘void’
drivers/base/power/clock_ops.c:293: error: expected ‘)’ before numeric constant
drivers/base/power/clock_ops.c: In function ‘pm_clk_runtime_suspend’:
drivers/base/power/clock_ops.c:384: error: called object ‘0u’ is not a function
drivers/base/power/clock_ops.c: In function ‘pm_clk_runtime_resume’:
drivers/base/power/clock_ops.c:400: error: called object ‘0u’ is not a function
This happens because:
- drivers/base/power/clock_ops.c depends on CONFIG_HAVE_CLK,
- the failing code inside clock_ops.c additionally depends on
CONFIG_PM,
- the forward declarations and other definitions in <linux/pm_clock.h>
depend on CONFIG_PM_CLK,
- CONFIG_PM_CLK is defined as PM && HAVE_CLK in kernel/power/Kconfig,
but it is not included on all architectures.
Fix this by protecting the failing code inside clock_ops.c by
CONFIG_PM_CLK instead of CONFIG_PM, so it matches <linux/pm_clock.h>.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Or Gerlitz says:
====================
Mellanox mlx4 driver fixes for 4.3-rc7
Jack's fix is for a regression introduced in 4.3-rc1
Carol's fix addresses an issue which exists for while and
turns to beat us hard on PPC, please queue for -stable.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
When doing memcpy/memset of EQEs, we should use sizeof struct
mlx4_eqe as the base size and not caps.eqe_size which could be bigger.
If caps.eqe_size is bigger than the struct mlx4_eqe then we corrupt
data in the master context.
When using a 64 byte stride, the memcpy copied over 63 bytes to the
slave_eq structure. This resulted in copying over the entire eqe of
interest, including its ownership bit -- and also 31 bytes of garbage
into the next WQE in the slave EQ -- which did NOT include the ownership
bit (and therefore had no impact).
However, once the stride is increased to 128, we are overwriting the
ownership bits of *three* eqes in the slave_eq struct. This results
in an incorrect ownership bit for those eqes, which causes the eq to
seem to be full. The issue therefore surfaced only once 128-byte EQEs
started being used in SRIOV and (overarchitectures that have 128/256
byte cache-lines such as PPC) - e.g after commit 77507aa249
"net/mlx4_core: Enable CQE/EQE stride support".
Fixes: 08ff32352d ('mlx4: 64-byte CQE/EQE support')
Signed-off-by: Carol L Soto <clsoto@linux.vnet.ibm.com>
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We do not set the ins_vlan field to zero when no vlan id is present in the packet.
Since WQEs in the TX ring are not zeroed out between uses, this oversight
could result in having vlan flags present in the WQE ctrl segment when no
vlan is preset.
Fixes: e38af4faf0 ('net/mlx4_en: Add support for hardware accelerated 802.1ad vlan')
Reported-by: Gideon Naim <gideonn@mellanox.com>
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
updates the bindings documents and dtsi file according to the review
comments[https://lkml.org/lkml/2015/9/21/670] from Rob Herring <robh@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: yankejian <yankejian@huawei.com>
Signed-off-by: huangdaode <huangdaode@hisilicon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
commit 2751c9882b ("vhost: cross-endian
support for legacy devices") introduced a minor regression: even with
cross-endian disabled, and even on LE host, vhost_is_little_endian is
checking is_le flag so there's always a branch.
To fix, simply check virtio_legacy_is_little_endian first.
Cc: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
delete action of ETHTOOL_ID_ON/ETHTOOL_ID_OFF in XGE ethtool -p,
so Hardware control the LED state instead of software.
Signed-off-by: Li Peng <lipeng321@huawei.com>
Signed-off-by: Yisen Zhuang <yisen.zhuang@huawei.com>
Signed-off-by: yankejian <yankejian@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Increased TX_TIMEOUT to 5HZ to accommodate worst case situation
for traffic and CPU intensive use cases
Signed-off-by: Priyanka Jain <Priyanka.Jain@freescale.com>
Signed-off-by: Abhimanyu <abhimanyu@freescale.com>
Acked-by: Claudiu Manoil <claudiu.manoil@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull ARM cpuidle changes for v4.4 from Daniel Lezcano.
* 'cpuidle/4.4' of http://git.linaro.org/people/daniel.lezcano/linux:
cpuidle: mvebu: disable the bind/unbind attributes and use builtin_platform_driver
cpuidle: mvebu: clean up multiple platform drivers
* using netdev carrier state
* add and rework some cfg80211 callbacks mainly for AP mode
* use devcoredump when triggered by firmware event
realtek
* create new directory drivers/net/wireless/realtek/ for all realtek
drivers, not visible to users (no kconfig changes etc)
* add rtl8xxxu, a new mac80211 driver for RTL8723AU, RTL8188CU,
RTL8188RU, RTL8191CU, RTL8192CU and hopefully more in the future
ath10k
* add board 2 API support for automatically choosing correct board file
* data path optimisations
* disable PCI power save for qca988x and QCA99x0 due to interop reasons
wil6210
* BlockAckReq support
* firmware crashdump using devcoredump
* capture all frames with sniffer
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
iQEcBAABAgAGBQJWLzQ5AAoJEG4XJFUm622btRwH/A6fS7p5uSZzH5lIU8ZBLc7X
MzC1jYVepHXaR5+OhBIbQ5oSo47Y4xqMeO2ylFMpUSg4vntqR9yZNVH2lXV5EfPB
fIaGYIsb3ExjAFoIjFUBwqSOB7CCZK5myk+SLiOu9XghjsLObP5JLKgA49PGhFRn
CCuDq9diDNeJBnVzTS1ms5wO6RmOBiizzjbu7adJI0Hu63z2+P4pNMG4Zz6E1z97
z8DRFEwdNN9gKHIaEC61h7ZT9XDB/Tj31Wl3Irbi4GBS7sRXnFK46FYU8fMVDbDZ
ykj05sq6nTrfwfVZtXbV3SxlYNSN4SFFRuskon6IUcIzlNTuIULgvlpCjJJ6tyQ=
=pFoQ
-----END PGP SIGNATURE-----
Merge tag 'wireless-drivers-next-for-davem-2015-10-27' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next
Kalle Valo says:
====================
here's a bigger pull request for 4.4. The diffstat looks scary as we
created a new directory realtek for all realtek drivers. In the future
I'm planning to create similar directories for all vendors, currently we
just have ath, mediatek and realtek. This change has been in linux-next
for a couple of weeks so it should be safe, but of course you never
know.
There's also a new driver rtl8xxxu for few realtek USB devices. This
just made it to the last linux-next build.
Otherwise there's nothing really special, more info below. If time
permits, and it's ok for you, I'm hoping to send you a one more pull
request this week.
brcmfmac
* using netdev carrier state
* add and rework some cfg80211 callbacks mainly for AP mode
* use devcoredump when triggered by firmware event
realtek
* create new directory drivers/net/wireless/realtek/ for all realtek
drivers, not visible to users (no kconfig changes etc)
* add rtl8xxxu, a new mac80211 driver for RTL8723AU, RTL8188CU,
RTL8188RU, RTL8191CU, RTL8192CU and hopefully more in the future
ath10k
* add board 2 API support for automatically choosing correct board file
* data path optimisations
* disable PCI power save for qca988x and QCA99x0 due to interop reasons
wil6210
* BlockAckReq support
* firmware crashdump using devcoredump
* capture all frames with sniffer
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
