davinci.h is not required by cppi_dma.h but cppi_dma.c, so move the
include to the right place.
Signed-off-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This adds tracepoints to dump musb interrupt events.
Signed-off-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This adds tracepoints to musb register read/write wrappers to get
trace log for register access.
The default tacepoint log prefix here would be musb_readX/writeX(),
which is not much helpful. So this patch let the tracepoints use
__buildin_return_address(0) to print the caller funciton name to
provide more context of the register access.
Signed-off-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
musb core already exports the register read/write wrappers, so clean up
the duplication in dsps glue.
Signed-off-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To avoid printk() overhead while debugging, this patch implements the
foundation of tracepoints logging for musb driver to make debug
easier.
Signed-off-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
User visible:
- Allow reading from a backward ring buffer (one setup via sys_perf_event_open
with perf_event_attr.write_backward = 1) (Wang Nan)
Infrastructure:
- Fix the build on Android NDK r12b (initially just for arm), that is now port
of my perf-build container collection and will get tested prior to sending
patches upstream (Arnaldo Carvalho de Melo)
- Add correct header for ipv6 defini
- Fix bitsperlong.h fallout (Arnaldo Carvalho de Melo, Peter Zijlstra)
- Use base 0 (auto) in filename__read_ull, so that we can handle hex values too (Jiri Olsa)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQIcBAABCAAGBQJXiUuRAAoJENZQFvNTUqpAwxQP/AuVqQ3FhKj9uNHL+walbjjA
cfJcFtcy0RMbQEN1PKPmUDyMAzJdTEChnzip9TWiS5a+33y5uGyegaOX9FsLwhiR
NOJe7K4+UQdJLWAVWH4YnScy7ElalStl9h7VTO8eculdrrGVbGhIbp8UACazwC6q
GgF3/GVAucMJxx3QHt5MVboQeyDdj/n9Rs4bBainDkS4RoD7oUOhpMGIM4Bb3q+o
nW0GM9hmRlT38lBzwgEm1zMwkNIICER/YkTklDBVCFPWW3Q8ncrOl8YvCIqLsWVU
Dxv3hifK23UoYhVO0+AlbjqSDAvpx8kJWpEM07r4kxc8QDzmvo1BRvd7O5AWyV0o
XMETTDhUpqA+R1Yl1hVYrmuaiMf0cUu1uFlpGKq9+nQ3h0IIJIjbS4nugzrCSJsT
CNcZVP1/MXFkT6jXn7Sw3wPb4cflLXch9uwaa3UYl+wOVdUDu7r4zt4avloAVJio
H3vM9VmlEzdNwiFgVPIMu+9jFkfJjBeAyG3m/xslS8hZcS0ByeTzMZfAVQ9m4Ymg
45R3vpQOHtCMiQ8oApJgkwXh4inUPs9wBZc4QPMSSz3MPWGecON4V+I3+pmW3vMg
BDSsu2r/kb5YbCxtv0F6BEKc5NnFc9xI3mfjbS9VTHE2nTf1RhB0o/cWo85sqOKc
a9PeBOmUO+Jiv6MkS0Y7
=QHDr
-----END PGP SIGNATURE-----
Merge tag 'perf-core-for-mingo-20160715' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
User visible changes:
- Allow reading from a backward ring buffer (one setup via sys_perf_event_open()
with perf_event_attr.write_backward = 1) (Wang Nan)
Infrastructure changes:
- Fix the build on Android NDK r12b (initially just for ARM), that is now port
of my perf-build container collection and will get tested prior to sending
patches upstream (Arnaldo Carvalho de Melo)
- Add correct header for IPv6 definitions
- Fix bitsperlong.h fallout (Arnaldo Carvalho de Melo, Peter Zijlstra)
- Use base 0 (auto) in filename__read_ull(), so that we can handle hex values too (Jiri Olsa)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The enables control of the SHT31 sensors heating element that can turned
on to remove excess humidity.
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: David Frey <david.frey@sensirion.com>
Signed-off-by: Matt Ranostay <mranostay@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
With PML enabled, guest will shut down if a PML full VMEXIT occurs during
event delivery. According to Intel SDM 27.2.3, PML full VMEXIT can occur when
event is being delivered through IDT, so KVM should not exit to user space
with error. Instead, it should let EXIT_REASON_PML_FULL go through and the
event will be re-injected on the next VMENTRY.
Signed-off-by: Lei Cao <lei.cao@stratus.com>
Cc: stable@vger.kernel.org
Fixes: 843e433057 ("KVM: VMX: Add PML support in VMX")
[Shortened the summary and Cc'd stable.]
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
This reverts commit 9770404a00.
The reverted patch is not needed as only userspace uses RDTSCP and
MSR_TSC_AUX is in host_save_user_msrs[] and therefore properly saved in
svm_vcpu_load() and restored in svm_vcpu_put() before every switch to
userspace.
The reverted patch did not allow the kernel to use RDTSCP in the future,
because of missed trashing in svm_set_msr() and 64-bit ifdef.
This reverts commit 2b23c3a6e3.
2b23c3a6e3 ("KVM: SVM: do not set MSR_TSC_AUX on 32-bit builds") is a
build fix for 9770404a00 and reverting them separately would only
break more bisections.
Cc: stable@vger.kernel.org
Now driver returns correct values for DVB-C:
SNR (in dB)
[mchehab@s-opensource.com: fix a new function to be static]
Signed-off-by: Abylay Ospan <aospan@netup.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
now driver returns correct values for DVB-C:
BER (post_bit_count and post_bit_error values)
UCB (count of uncorrected errors)
also, some code cleanup was done - checkpatch.pl now is happy
Signed-off-by: Abylay Ospan <aospan@netup.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
DVB-C should use cxd2841er_read_agc_gain_c() to get the gain. The same
function is used for all DVB-C annex delivery systems.
Signed-off-by: Abylay Ospan <aospan@netup.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The scale for ISDB-T was wrong too: it was inverted, and
on a relative scale.
Use a linear interpolation to make it look better.
The formula was empirically determined, using 3 frequencies
(175 MHz, 410 MHz and 800 MHz), measuring from -50dBm to
-12dBm in steps of 0.5dB.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Instead of using a relative frequency range, calibrate it to
show the results in dB. The callibration was done getting
samples with a signal generated from -50dBm to -12dBm,
incremented in steps of 0.5 dB, using 3 frequencies:
175 MHz, 410 MHz and 800 MHz. The modulated signal was
using QAM64, and it was used a linear interpolation of all
the results.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Currently, there's no stats for DVB-C. Let's at least return
signal strength. The scale is different than on DVB-T, so let's
use a relative scale, for now.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
What userspace expects is to receive both bit_error and bit_count
counters. So, instead of doing the division at the Kernel,
return the counters for userspace to handle it the way it
wants.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
This adds kernel-doc style descriptions for 6 functions and
fixes 1 typo.
Signed-off-by: Richard Sailer <richard@weltraumpflege.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The Makefile for building this is "acpi-y" and so it is not built
as a module. Hence including module.h and everything that comes
with it just for the no-op MODULE_LICENSE is rather heavy handed.
The license info is found at the top of the file, so we just remove
the MODULE_LICENSE and the include of module.h
We add an include of export.h since the file exports some symbols.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The Kconfig for this file is:
drivers/acpi/Kconfig:config ACPI_DOCK
drivers/acpi/Kconfig: bool "Dock"
...and so it is not built as a module. Hence including module.h
and everything that comes with it just for the no-op MODULE_LICENSE
and friends is rather heavy handed.
The license/author info is found at the top of the file, so we
just remove the MODULE_LICENSE etc and the include of module.h
The file does still have some module_param() so we add the right
include for that infrastructure.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The Kconfig for this file is:
drivers/acpi/Kconfig:config ACPI_PCI_SLOT
drivers/acpi/Kconfig: bool "PCI slot detection driver"
...and so it is not built as a module. Hence including module.h
and everything that comes with it just for the no-op MODULE_LICENSE
and friends is rather heavy handed.
The license/author info is found at the top of the file, so we
just remove the MODULE_LICENSE etc and the include of module.h
We delete the DRIVER_VERSION macro as well since it is unused.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The Kconfig currently controlling compilation of these files are:
drivers/acpi/Kconfig:menuconfig PMIC_OPREGION
drivers/acpi/Kconfig: bool "PMIC (Power Management Integrated Circuit) operation region support"
drivers/acpi/Kconfig:config BXT_WC_PMIC_OPREGION
drivers/acpi/Kconfig: bool "ACPI operation region support for BXT WhiskeyCove PMIC"
drivers/acpi/Kconfig:config XPOWER_PMIC_OPREGION
drivers/acpi/Kconfig: bool "ACPI operation region support for XPower AXP288 PMIC"
...meaning they currently are not being built as a module by anyone.
Lets remove the couple traces of modular infrastructure use, so that
when reading the code there is no doubt it is builtin-only.
We delete the MODULE_LICENSE tag etc. since all that information
is already contained at the top of the file in the comments.
One file was using module_init. Since module_init translates to
device_initcall in the non-modular case, the init ordering remains
unchanged with this commit.
In one case we replace the module.h with export.h since that file
is exporting some symbols, but does not use __init. The other two
are using __init and so module.h gets replaced with init.h there.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
One regression in the Device Tree handling for OMAP NAND handling of the ELM
node. TI migrated to using the property name "ti,elm-id", but forgot to keep
compatibility with the old "elm_id" property.
Also, might as well send out this MAINTAINERS fixup now.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=tSga
-----END PGP SIGNATURE-----
Merge tag 'for-linus-20160715' of git://git.infradead.org/linux-mtd
Pull MTD fix from Brian Norris:
"Late MTD fix for v4.7:
One regression in the Device Tree handling for OMAP NAND handling of
the ELM node. TI migrated to using the property name "ti,elm-id", but
forgot to keep compatibility with the old "elm_id" property.
Also, might as well send out this MAINTAINERS fixup now"
* tag 'for-linus-20160715' of git://git.infradead.org/linux-mtd:
mtd: nand: omap2: Add check for old elm binding
MAINTAINERS: Add file patterns for mtd device tree bindings
There are two generics functions phy_ethtool_{get|set}_link_ksettings,
so we can use them instead of defining the same code in the driver.
There was a check on CAP_NET_ADMIN in cpmac_set_settings, but this
check is already done in dev_ethtool, so no need to repeat it before
calling the generic function.
Signed-off-by: Philippe Reynes <tremyfr@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The private structure contain a pointer to phydev, but the structure
net_device already contain such pointer. So we can remove the pointer
phy in the private structure, and update the driver to use the
one contained in struct net_device.
Signed-off-by: Philippe Reynes <tremyfr@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are two generics functions phy_ethtool_{get|set}_link_ksettings,
so we can use them instead of defining the same code in the driver.
There was a check on CAP_NET_ADMIN in au1000_set_settings, but this
check is already done in dev_ethtool, so no need to repeat it before
calling the generic function.
Signed-off-by: Philippe Reynes <tremyfr@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The private structure contain a pointer to phydev, but the structure
net_device already contain such pointer. So we can remove the pointer
phydev in the private structure, and update the driver to use the
one contained in struct net_device.
Signed-off-by: Philippe Reynes <tremyfr@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are two generics functions phy_ethtool_{get|set}_link_ksettings,
so we can use them instead of defining the same code in the driver.
Signed-off-by: Philippe Reynes <tremyfr@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The private structure contain a pointer to phydev, but the structure
net_device already contain such pointer. So we can remove the pointer
phy in the private structure, and update the driver to use the
one contained in struct net_device.
Signed-off-by: Philippe Reynes <tremyfr@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are two generics functions phy_ethtool_{get|set}_link_ksettings,
so we can use them instead of defining the same code in the driver.
Signed-off-by: Philippe Reynes <tremyfr@gmail.com>
Reviewed-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
The private structure contain a pointer to phydev, but the structure
net_device already contain such pointer. So we can remove the pointer
phy in the private structure, and update the driver to use the
one contained in struct net_device.
Signed-off-by: Philippe Reynes <tremyfr@gmail.com>
Reviewed-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are two generics functions phy_ethtool_{get|set}_link_ksettings,
so we can use them instead of defining the same code in the driver.
Signed-off-by: Philippe Reynes <tremyfr@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The private structure contain a pointer to phydev, but the structure
net_device already contain such pointer. So we can remove the pointer
phy in the private structure, and update the driver to use the
one contained in struct net_device.
Signed-off-by: Philippe Reynes <tremyfr@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are two generics functions phy_ethtool_{get|set}_link_ksettings,
so we can use them instead of defining the same code in the driver.
Signed-off-by: Philippe Reynes <tremyfr@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The private structure contain a pointer to phydev, but the structure
net_device already contain such pointer. So we can remove the pointer
phy in the private structure, and update the driver to use the
one contained in struct net_device.
Signed-off-by: Philippe Reynes <tremyfr@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are two generics functions phy_ethtool_{get|set}_link_ksettings,
so we can use them instead of defining the same code in the driver.
Signed-off-by: Philippe Reynes <tremyfr@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The private structure contain a pointer to phydev, but the structure
net_device already contain such pointer. So we can remove the pointer
phy in the private structure, and update the driver to use the
one contained in struct net_device.
Signed-off-by: Philippe Reynes <tremyfr@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When building under W=1, the lack of lkdtm.h in lkdtm_usercopy.c and
lkdtm_rodata.c was discovered. This fixes the issue and consolidates
the common header and the pr_fmt macro for simplicity and regularity
across each test source file.
Signed-off-by: Kees Cook <keescook@chromium.org>
A conversion of the lkdtm core module added an "#ifdef CONFIG_KPROBES" check,
but a number of functions then become unused:
drivers/misc/lkdtm_core.c:340:16: error: 'lkdtm_debugfs_entry' defined but not used [-Werror=unused-function]
drivers/misc/lkdtm_core.c:122:12: error: 'jp_generic_ide_ioctl' defined but not used [-Werror=unused-function]
drivers/misc/lkdtm_core.c:114:12: error: 'jp_scsi_dispatch_cmd' defined but not used [-Werror=unused-function]
drivers/misc/lkdtm_core.c:106:12: error: 'jp_hrtimer_start' defined but not used [-Werror=unused-function]
drivers/misc/lkdtm_core.c:97:22: error: 'jp_shrink_inactive_list' defined but not used [-Werror=unused-function]
drivers/misc/lkdtm_core.c:89:13: error: 'jp_ll_rw_block' defined but not used [-Werror=unused-function]
drivers/misc/lkdtm_core.c:83:13: error: 'jp_tasklet_action' defined but not used [-Werror=unused-function]
drivers/misc/lkdtm_core.c:75:20: error: 'jp_handle_irq_event' defined but not used [-Werror=unused-function]
drivers/misc/lkdtm_core.c:68:21: error: 'jp_do_irq' defined but not used [-Werror=unused-function]
This adds the same #ifdef everywhere. There is probably a better way to do the
same thing, but for now this avoids the new warnings.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: c479e3fd88 ("lkdtm: use struct arrays instead of enums")
[kees: moved some code around to better consolidate the #ifdefs]
Signed-off-by: Kees Cook <keescook@chromium.org>
Nothing is decrementing the index "i" while we are cleaning up the
fragments we could not successful transmit.
Fixes: 9cde94506e ("bgmac: implement scatter/gather support")
Reported-by: coverity (CID 1352048)
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The recent change to tracepoint napi:napi_poll changed the order of
the parameters that perf scripts sees, the printk was correct. The
problem was that the new parameters (work and budget) were pushed
in front of dev_name.
The new parameters obviously need to be appended to keep backward
compatible.
Fixes: 1db19db7f5 ("net: tracepoint napi:napi_poll add work and budget")
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The default value of idle interval is 2 mins, but for most time when
screen shutdown, there are still operations during the 2 mins interval,
and gc's sleep time is about 30 secs to 60 secs, so there is almost no
chance for GC thread to do garbage collecting.
Set default value of idle interval value from 2 mins to 5 secs for
fixing.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch reverts 19a5f5e2ef (f2fs: drop any block plugging),
and adds blk_plug in write paths additionally.
The main reason is that blk_start_plug can be used to wake up from low-power
mode before submitting further bios.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Datas in file can be operated by GC and DIO simultaneously, so we will
face race case as below:
For write case:
Thread A Thread B
- generic_file_direct_write
- invalidate_inode_pages2_range
- f2fs_direct_IO
- do_blockdev_direct_IO
- do_direct_IO
- get_more_blocks
- f2fs_gc
- do_garbage_collect
- gc_data_segment
- move_data_page
- do_write_data_page
migrate data block to new block address
- dio_bio_submit
update user data to old block address
For read case:
Thread A Thread B
- generic_file_direct_write
- invalidate_inode_pages2_range
- f2fs_direct_IO
- do_blockdev_direct_IO
- do_direct_IO
- get_more_blocks
- f2fs_balance_fs
- f2fs_gc
- do_garbage_collect
- gc_data_segment
- move_data_page
- do_write_data_page
migrate data block to new block address
- write_checkpoint
- do_checkpoint
- clear_prefree_segments
- f2fs_issue_discard
discard old block adress
- dio_bio_submit
update user buffer from obsolete block address
In order to fix this, for one file, we should let DIO and GC getting exclusion
against with each other.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
In 1TB storage, we need to admit 22841 prefree segments, which can consume
too much segments.
This patch sets 8GB in max. prefree segments in that case.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This is to fix wrong error pointer handling flow reported by Dan.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
