This patch fixes to report the right error number of f2fs_find_entry to
its caller.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Add the missing free_netdev() before return from function
cpmac_probe() in the error handling case.
This patch revert commit 0465be8f4f ("net: cpmac: fix in
releasing resources"), which changed to only free_netdev
while register_netdev failed.
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR.
Generated by: scripts/coccinelle/api/ptr_ret.cocci
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Acked-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In ops->reset() error handling case, clk_disable_unprepare() is missed
before return from this function.
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Acked-by: Mans Rullgard <mans@mansr.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
module_platform_driver() makes the code simpler by eliminating
boilerplate code.
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Remove .owner field if calls are used which set it automatically.
Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
In case of error, the function of_parse_phandle() returns NULL
pointer not ERR_PTR(). The IS_ERR() test in the return value
check should be replaced with NULL test.
Fixes: 46aa27df88 ('net: axienet: Use devm_* calls')
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Johan Hedberg says:
====================
pull request: bluetooth-next 2016-07-19
Here's likely the last bluetooth-next pull request for the 4.8 kernel:
- Fix for L2CAP setsockopt
- Fix for is_suspending flag handling in btmrvl driver
- Addition of Bluetooth HW & FW info fields to debugfs
- Fix to use int instead of char for callback status.
The last one (from Geert Uytterhoeven) is actually not purely a
Bluetooth (or 802.15.4) patch, but it was agreed with other maintainers
that we take it through the bluetooth-next tree.
Please let me know if there are any issues pulling. Thanks.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add the official BPF ELF e_machine value that was assigned recently [1,2]
and will be propagated to glibc, et al. LLVM is switching to it in 3.9
release.
[1] 36b9c09330
[2] http://lists.iovisor.org/pipermail/iovisor-dev/2016-June/000266.html
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
For the ifndef case of CONFIG_BPF_SYSCALL, an inline version of
bpf_prog_add needs to exist otherwise the build breaks on some configs.
drivers/net/ethernet/mellanox/mlx4/en_netdev.c:2544:10: error: implicit declaration of function 'bpf_prog_add'
prog = bpf_prog_add(prog, priv->rx_ring_num - 1);
The function is introduced in
59d3656d5b ("bpf: add bpf_prog_add api for bulk prog refcnt")
and first used in
47f1afdba2b87 ("net/mlx4_en: add support for fast rx drop bpf program").
Fixes: 47f1afdba2b87 ("net/mlx4_en: add support for fast rx drop bpf program")
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Reported-by: Tariq Toukan <ttoukan.linux@gmail.com>
Signed-off-by: Brenden Blanco <bblanco@plumgrid.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The ret variable is unused in wlcore_probe_of()
Remove it for fixing build warning.
Fixes: 01efe65aba ("wlcore: spi: add wl18xx support")
Signed-off-by: Eyal Reizer <eyalr@ti.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
The MIN_STACK_SIZE macro tries evaluate how much stack space needs
to be saved in the jprobes_stack array, sized at 128 bytes.
When using the IRQ stack, said macro can happily return up to
IRQ_STACK_SIZE, which is 16kB. Mayhem follows.
This patch fixes things by getting rid of the crazy macro and
limiting the copy to be at most the size of the jprobes_stack
array, no matter which stack we're on.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The discard passdown was being issued after the block was unmapped,
which meant the block could be reprovisioned whilst the passdown discard
was still in flight.
We can only identify unshared blocks (safe to do a passdown a discard
to) once they're unmapped and their ref count hits zero. Block ref
counts are now used to guard against concurrent allocation of these
blocks that are being discarded. So now we unmap the block, issue
passdown discards, and the immediately increment ref counts for regions
that have been discarded via passed down (this is safe because
allocation occurs within the same thread). We then decrement ref counts
once the passdown discard IO is complete -- signaling these blocks may
now be allocated.
This fixes the potential for corruption that was reported here:
https://www.redhat.com/archives/dm-devel/2016-June/msg00311.html
Reported-by: Dennis Yang <dennisyang@qnap.com>
Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
dm_btree_find_next_single() can short-circuit the search for a block
with a return of -ENODATA if all entries are higher than the search key
passed to lower_bound().
This hasn't been a problem because of the way the btree has been used by
DM thinp. But it must be fixed now in preparation for fixing the race
in DM thinp's handling of simultaneous block discard vs allocation.
Otherwise, once that fix is in place, some of the blocks in a discard
would not be unmapped as expected.
Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
The Rockchip SPI controller's length register only supports 16-bits,
yielding a maximum length of 64KiB (the CTRLR1 register holds "length -
1"). Trying to transfer more than that (e.g., with a large SPI flash
read) will cause the driver to hang.
Now, it seems that while theoretically we should be able to program
CTRLR1 with 0xffff, and get a 64KiB transfer, but that also seems to
cause the core to choke, so stick with a maximum of 64K - 1 bytes --
i.e., 0xffff.
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
This fix alters the minimum and maximum BUCK voltage limits for DA9052 and
DA9053. It does so for the following cases:
DA9052
- BUCK3 (MEM)
min: 0.925V -> 0.950V
max: 2.500V -> 2.525V
DA9053
- BUCK3 (MEM)
min: 0.925V -> 0.950V
max: 2.500V -> 2.525V
- BUCK4 (PERI)
min: 0.925V -> 0.950V
max: 2.500V -> 2.525V
The voltage range remains the same, but the limits are shifted by +0.025V.
This change is provided on DA9052:MEM, DA9053:MEM and DA9053:PERI
and is a voltage difference of 0.025V, compared to those measured before
this fix is applied. The patch has the effect of decreasing *all* measured
voltages on those BUCKs when compared against the previously measured
values for the same software voltage request.
For example, with this fix applied for DA9052:MEM, DA9053:MEM and
DA9053:PERI, the following is true.
Because the previous software defined slot 0 as being 0.925V, if a request
for 0.950V was previously sent, the slot 1 voltage would have been used.
This would have corresponded to an actual measured voltage of 0.975V. But,
with this patch fix, and with slot 0 properly aligned to 0.950V, if a
voltage of 0.950V is requested by software, a measured value of 0.950V will
be provided.
Tested-by: Steve Twiss <stwiss.opensource@diasemi.com>
Signed-off-by: Steve Twiss <stwiss.opensource@diasemi.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
`changeable` is the "version" of mode page requested by the user.
It will be less confusing/misleading if we do not check it
"together" with the setting bits of the drive.
Not to mention that we currently have ata_mselect_*() implemented
in a way that each of them will serve exclusively a particular bit
on each page. The old style will hence make the condition look even
more unnecessarily arcane if the ata_msense_*() is reflecting more
than one bit.
Signed-off-by: Tom Yan <tom.ty89@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Due to PCI subsystem behaviour, unloading AHCI driver will disable
MSI and enable INTx. When HBA supports MSIx or Multiple MSI, Driver's
irq handler doesn't clear GHC.IS register. It works well when reading or
writing data and GHC.IS is always non-zero. But when unloading driver
(or any other operation which causes disable MSIx and enable INTx), PCI
subsystem uses config write(Rx04.bit10) to enable INTx. Because
GHC.IS is non-zero, HBA will falsely assume some port needs interrupt
service. Then it asserts INTx. To make things worse, when AHCI controller
shares the same interrupt pin with other PCI device, that PCI device's ISR
will be called and nobody de-asserts previous INTx.
This patch clears GHC.IS in ahci_port_stop() even when using MSIx or
MMSI to prevent this case. It ensures GHC.IS is zero before PCI subsystem
enables INTx.
tj: Minor updates to the comment.
Signed-off-by: Raymond Pang <raymond_rule@hotmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
We use _GLOBAL so there is no need to do the manual alignment,
in fact it causes a build failure.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Ignore assembly files generated by the perl script.
Signed-off-by: Paulo Flabiano Smorigo <pfsmorigo@linux.vnet.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Remove including <linux/version.h> that don't need it.
Signed-off-by: Wei Yongjun <weiyj.lk@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
According to the datasheet you should only write 1 to this bit. If it is
not set, at least AIN3 will return bad values on newer silicon revisions.
Fixes: d84ca5b345 ("hwmon: Add driver for ADT7411 voltage and temperature sensor")
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
This driver implements hardware monitoring and watchdog support
for the FTS BMC Chip "Teutates".
Signed-off-by: Thilo Cestonaro <thilo@cestona.ro>
[groeck: Updated subject and description; fixed dependencies]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
vcvtph2ps does not have an immediate operand, so remove the erroneous
'Ib' from its opcode map entry. Add vcvtph2ps to the perf tools new
instructions test to verify it.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: X86 ML <x86@kernel.org>
Link: http://lkml.kernel.org/r/1469003437-32706-2-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Brenden Blanco says:
====================
Add driver bpf hook for early packet drop and forwarding
This patch set introduces new infrastructure for programmatically
processing packets in the earliest stages of rx, as part of an effort
others are calling eXpress Data Path (XDP) [1]. Start this effort by
introducing a new bpf program type for early packet filtering, before
even an skb has been allocated.
Extend on this with the ability to modify packet data and send back out
on the same port.
Patch 1 adds an API for bulk bpf prog refcnt incrememnt.
Patch 2 introduces the new prog type and helpers for validating the bpf
program. A new userspace struct is defined containing only data and
data_end as fields, with others to follow in the future.
In patch 3, create a new ndo to pass the fd to supported drivers.
In patch 4, expose a new rtnl option to userspace.
In patch 5, enable support in mlx4 driver.
In patch 6, create a sample drop and count program. With single core,
achieved ~20 Mpps drop rate on a 40G ConnectX3-Pro. This includes
packet data access, bpf array lookup, and increment.
In patch 7, add a page recycle facility to mlx4 rx, enabled when xdp is
active.
In patch 8, add the XDP_TX type to bpf.h
In patch 9, add helper in tx patch for writing tx_desc
In patch 10, add support in mlx4 for packet data write and forwarding
In patch 11, turn on packet write support in the bpf verifier
In patch 12, add a sample program for packet write and forwarding. With
single core, achieved ~10 Mpps rewrite and forwarding.
[1] https://github.com/iovisor/bpf-docs/blob/master/Express_Data_Path.pdf
v10:
1/12: Add bulk refcnt api.
5/12: Move prog from priv to ring. This attribute is still only set
globally, but the path to finer granularity should be clear. No lock
is taken, so some rings may operate on older programs for a time (one
napi loop). Looked into options such as napi_synchronize, but they
were deemed too slow (calls to msleep).
Rename prog to xdp_prog. Add xdp_ring_num to help with accounting,
used more heavily in later patches.
7/12: Adjust to use per-ring xdp prog. Use priv->xdp_ring_num where
before priv->prog was used to determine buffer allocations.
9/12: Add cpu_to_be16 to vlan_tag in mxl4_en_xmit(). Remove unused variable
from mlx4_en_xmit and unused params from build_inline_wqe.
v9:
4/11: Add missing newline in en_err message.
6/11: Move page_cache cleanup from mlx4_en_destroy_rx_ring to
mlx4_en_deactivate_rx_ring. Move mlx4_en_moderation_update back to
static. Remove calls to mlx4_en_alloc/free_resources in mlx4_xdp_set.
Adopt instead the approach of mlx4_en_change_mtu to use a watchdog.
9/11: Use a per-ring function pointer in tx to separate out the code
for regular and recycle paths of tx completion handling. Add a helper
function to init the recycle ring and callback, called just after
activating tx. Remove extra tx ring resource requirement, and instead
steal from the upper rings. This helps to avoid needing
mlx4_en_alloc_resources. Add some hopefully meaningful error
messages for the various error cases. Reverted some of the
hard-to-follow logic that was accounting for the extra tx rings.
v8:
1/11: Reduce WARN_ONCE to single line. Also, change act param of that
function to u32 to match return type of bpf_prog_run_xdp.
2/11: Clarify locking semantics in ndo comment.
4/11: Add en_err warning in mlx4_xdp_set on num_frags/mtu violation.
v7:
Addressing two of the major discussion points: return codes and ndo.
The rest will be taken as todo items for separate patches.
Add an XDP_ABORTED type, which explicitly falls through to DROP. The
same result must be taken for the default case as well, as it is now
well-defined API behavior.
Merge ndo_xdp_* into a single ndo. The style is similar to
ndo_setup_tc, but with less unidirectional naming convention. The IFLA
parameter names are unchanged.
TODOs:
Add ethtool per-ring stats for aborted, default cases, maybe even drop
and tx as well.
Avoid duplicate dma sync operation in XDP_PASS case as mentioned by
Saeed.
1/12: Add XDP_ABORTED enum, reword API comment, and update commit
message.
2/12: Rewrite ndo_xdp_*() into single ndo_xdp() with type/union style
calling convention.
3/12: Switch to ndo_xdp callback.
4/12: Add XDP_ABORTED case as a fall-through to XDP_DROP. Implement
ndo_xdp.
12/12: Dropped, this will need some more work.
v6:
2/12: drop unnecessary netif_device_present check
4/12, 6/12, 9/12: Reorder default case statement above drop case to
remove some copy/paste.
v5:
0/12: Rebase and remove previous 1/13 patch
1/12: Fix nits from Daniel. Left the (void *) cast as-is, to be fixed
in future. Add bpf_warn_invalid_xdp_action() helper, to be used when
out of bounds action is returned by the program. Add a comment to
bpf.h denoting the undefined nature of out of bounds returns.
2/12: Switch to using bpf_prog_get_type(). Rename ndo_xdp_get() to
ndo_xdp_attached().
3/12: Add IFLA_XDP as a nested type, and add the associated nla_policy
for the new subtypes IFLA_XDP_FD and IFLA_XDP_ATTACHED.
4/12: Fixup the use of READ_ONCE in the ndos. Add a user of
bpf_warn_invalid_xdp_action helper.
5/12: Adjust to using the nested netlink options.
6/12: kbuild was complaining about overflow of u16 on tile
architecture...bump frag_stride to u32. The page_offset member that
is computed from this was already u32.
v4:
2/12: Add inline helper for calling xdp bpf prog under rcu
3/12: Add detail to ndo comments
5/12: Remove mlx4_call_xdp and use inline helper instead.
6/12: Fix checkpatch complaints
9/12: Introduce new patch 9/12 with common helper for tx_desc write
Refactor to use common tx_desc write helper
11/12: Fix checkpatch complaints
v3:
Rewrite from v2 trying to incorporate feedback from multiple sources.
Specifically, add ability to forward packets out the same port and
allow packet modification.
For packet forwarding, the driver reserves a dedicated set of tx rings
for exclusive use by xdp. Upon completion, the pages on this ring are
recycled directly back to a small per-rx-ring page cache without
being dma unmapped.
Use of the percpu skb is dropped in favor of a lightweight struct
xdp_buff. The direct packet access feature is leveraged to remove
dependence on the skb.
The mlx4 driver implementation allocates a page-per-packet and maps it
in PCI_DMA_BIDIRECTIONAL mode when the bpf program is activated.
Naming is converted to use "xdp" instead of "phys_dev".
v2:
1/5: Drop xdp from types, instead consistently use bpf_phys_dev_
Introduce enum for return values from phys_dev hook
2/5: Move prog->type check to just before invoking ndo
Change ndo to take a bpf_prog * instead of fd
Add ndo_bpf_get rather than keeping a bool in the netdev struct
3/5: Use ndo_bpf_get to fetch bool
4/5: Enforce that only 1 frag is ever given to bpf prog by disallowing
mtu to increase beyond FRAG_SZ0 when bpf prog is running, or conversely
to set a bpf prog when priv->num_frags > 1
Rename pseudo_skb to bpf_phys_dev_md
Implement ndo_bpf_get
Add dma sync just before invoking prog
Check for explicit bpf return code rather than nonzero
Remove increment of rx_dropped
5/5: Use explicit bpf return code in example
Update commit log with higher pps numbers
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a sample that rewrites and forwards packets out on the same
interface. Observed single core forwarding performance of ~10Mpps.
Since the mlx4 driver under test recycles every single packet page, the
perf output shows almost exclusively just the ring management and bpf
program work. Slowdowns are likely occurring due to cache misses.
Signed-off-by: Brenden Blanco <bblanco@plumgrid.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
For forwarding to be effective, XDP programs should be allowed to
rewrite packet data.
This requires that the drivers supporting XDP must all map the packet
memory as TODEVICE or BIDIRECTIONAL before invoking the program.
Signed-off-by: Brenden Blanco <bblanco@plumgrid.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
A user will now be able to loop packets back out of the same port using
a bpf program attached to xdp hook. Updates to the packet contents from
the bpf program is also supported.
For the packet write feature to work, the rx buffers are now mapped as
bidirectional when the page is allocated. This occurs only when the xdp
hook is active.
When the program returns a TX action, enqueue the packet directly to a
dedicated tx ring, so as to avoid completely any locking. This requires
the tx ring to be allocated 1:1 for each rx ring, as well as the tx
completion running in the same softirq.
Upon tx completion, this dedicated tx ring recycles pages without
unmapping directly back to the original rx ring. In steady state tx/drop
workload, effectively 0 page allocs/frees will occur.
In order to separate out the paths between free and recycle, a
free_tx_desc func pointer is introduced that is optionally updated
whenever recycle_ring is activated. By default the original free
function is always initialized.
Signed-off-by: Brenden Blanco <bblanco@plumgrid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In preparation for writing the tx descriptor from multiple functions,
create a helper for both normal and blueflame access.
Signed-off-by: Brenden Blanco <bblanco@plumgrid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
XDP enabled drivers must transmit received packets back out on the same
port they were received on when a program returns this action.
Signed-off-by: Brenden Blanco <bblanco@plumgrid.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The mlx4 driver by default allocates order-3 pages for the ring to
consume in multiple fragments. When the device has an xdp program, this
behavior will prevent tx actions since the page must be re-mapped in
TODEVICE mode, which cannot be done if the page is still shared.
Start by making the allocator configurable based on whether xdp is
running, such that order-0 pages are always used and never shared.
Since this will stress the page allocator, add a simple page cache to
each rx ring. Pages in the cache are left dma-mapped, and in drop-only
stress tests the page allocator is eliminated from the perf report.
Note that setting an xdp program will now require the rings to be
reconfigured.
Before:
26.91% ksoftirqd/0 [mlx4_en] [k] mlx4_en_process_rx_cq
17.88% ksoftirqd/0 [mlx4_en] [k] mlx4_en_alloc_frags
6.00% ksoftirqd/0 [mlx4_en] [k] mlx4_en_free_frag
4.49% ksoftirqd/0 [kernel.vmlinux] [k] get_page_from_freelist
3.21% swapper [kernel.vmlinux] [k] intel_idle
2.73% ksoftirqd/0 [kernel.vmlinux] [k] bpf_map_lookup_elem
2.57% swapper [mlx4_en] [k] mlx4_en_process_rx_cq
After:
31.72% swapper [kernel.vmlinux] [k] intel_idle
8.79% swapper [mlx4_en] [k] mlx4_en_process_rx_cq
7.54% swapper [kernel.vmlinux] [k] poll_idle
6.36% swapper [mlx4_core] [k] mlx4_eq_int
4.21% swapper [kernel.vmlinux] [k] tasklet_action
4.03% swapper [kernel.vmlinux] [k] cpuidle_enter_state
3.43% swapper [mlx4_en] [k] mlx4_en_prepare_rx_desc
2.18% swapper [kernel.vmlinux] [k] native_irq_return_iret
1.37% swapper [kernel.vmlinux] [k] menu_select
1.09% swapper [kernel.vmlinux] [k] bpf_map_lookup_elem
Signed-off-by: Brenden Blanco <bblanco@plumgrid.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support for the BPF_PROG_TYPE_XDP hook in mlx4 driver.
In tc/socket bpf programs, helpers linearize skb fragments as needed
when the program touches the packet data. However, in the pursuit of
speed, XDP programs will not be allowed to use these slower functions,
especially if it involves allocating an skb.
Therefore, disallow MTU settings that would produce a multi-fragment
packet that XDP programs would fail to access. Future enhancements could
be done to increase the allowable MTU.
The xdp program is present as a per-ring data structure, but as of yet
it is not possible to set at that granularity through any ndo.
Signed-off-by: Brenden Blanco <bblanco@plumgrid.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sets the bpf program represented by fd as an early filter in the rx path
of the netdev. The fd must have been created as BPF_PROG_TYPE_XDP.
Providing a negative value as fd clears the program. Getting the fd back
via rtnl is not possible, therefore reading of this value merely
provides a bool whether the program is valid on the link or not.
Signed-off-by: Brenden Blanco <bblanco@plumgrid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add one new netdev op for drivers implementing the BPF_PROG_TYPE_XDP
filter. The single op is used for both setup/query of the xdp program,
modelled after ndo_setup_tc.
Signed-off-by: Brenden Blanco <bblanco@plumgrid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a new bpf prog type that is intended to run in early stages of the
packet rx path. Only minimal packet metadata will be available, hence a
new context type, struct xdp_md, is exposed to userspace. So far only
expose the packet start and end pointers, and only in read mode.
An XDP program must return one of the well known enum values, all other
return codes are reserved for future use. Unfortunately, this
restriction is hard to enforce at verification time, so take the
approach of warning at runtime when such programs are encountered. Out
of bounds return codes should alias to XDP_ABORTED.
Signed-off-by: Brenden Blanco <bblanco@plumgrid.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
A subsystem may need to store many copies of a bpf program, each
deserving its own reference. Rather than requiring the caller to loop
one by one (with possible mid-loop failure), add a bulk bpf_prog_add
api.
Signed-off-by: Brenden Blanco <bblanco@plumgrid.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch fixes an issue that a syscall (e.g. sendto syscall) cannot
work correctly. Since the sendto syscall doesn't have msg_control buffer,
the sock_tx_timestamp() in packet_snd() cannot work correctly because
the socks.tsflags is set to 0.
So, this patch sets the socks.tsflags to sk->sk_tsflags as default.
Fixes: c14ac9451c ("sock: enable timestamping using control messages")
Reported-by: Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com>
Reported-by: Keita Kobayashi <keita.kobayashi.ym@renesas.com>
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Gavin Shan says:
====================
NCSI Support
This series rebases on David's linux-net git repo ("master" branch). It's
to support NCSI stack on drivers/net/ethernet/faraday/ftgmac100.c. The
implementation is based on NCSI spec (version: 1.1.0):
https://www.dmtf.org/sites/default/files/standards/documents/DSP0222_1.1.0.pdf
As the following figure shows and defined in NCSI spec:
* The NC-SI (aka NCSI) is defined as the interface between a (Base)
Management Controller (BMC) and one or multiple Network Interface
Controlers (NIC) on host side. The interface is responsible for providing
external network connectivity for BMC.
* Each BMC can connect to multiple packages, up to 8. Each package can have
multiple channels, up to 32. Every package and channel are identified by
3-bits and 5-bits in NCSI packet.
* NCSI packet, encapsulated in ethernet frame, has 0x88F8 in the protocol
field. The destination MAC address should be 0xFF's while the source MAC
address can be arbitrary one.
* NCSI packets are classified to command, response, AEN (Asynchronous Event Notification).
Commands are sent from BMC to host (NIC) for configuration and
information retrival. Responses, corresponding to commands, are sent from
host to BMC for confirmation and requested information. One command should
have one and only one response. AEN is sent from host to BMC for notification
(e.g. link down on active channel) so that BMC can take appropriate action.
+------------------+ +----------------------------------------------+
| | | Host |
| BMC | | |
| | | +-------------------+ +-------------------+ |
| +---------+ | | | Package-A | | Package-B | |
| | | | | +---------+---------+ +-------------------+ |
| |ftgmac100| | | | Channel | Channel | | Channel | Channel | |
+----+----+----+---+ +-+---------+---------+--+---------+---------+-+
| | |
| | |
+-----------------------------+----------------------+
The series of patches is highlighted as:
The design for the patchset is highlighted as below:
* The network driver uses 3 interfaces exported from NCSI stack:
ncsi_register_dev() - Register (create) a associated NCSI device.
ncsi_start_dev() - Bring up the NCSI device.
ncsi_unregister_dev() - Destroy the registered NCSI device.
* There are several data structures introduced for different objects:
struct ncsi_dev - NCSI device seen by network device driver.
struct ncsi_dev_priv - NCSI device seen by NCSI stack.
struct ncsi_package - NCSI package which can have multiple channels.
struct ncsi_channel - NCSI channel.
* The NCSI stack is driven by workqueue and state machine internally.
* The all available NCSI packages and channels are enumerated (probed) on
the first call to ncsi_start_dev(). The NCSI topology won't change until
the NCSI device is destroyed.
* All available channels will be brought up When the hardware arbitration
is enabled. Otherwise, only one channel is selected as active one. The
NCSI internal is driven by state machine with help of a workqueue. In
the meanwhile, there are 3 states for each channel which can be put into
a queue requesting for configuration or suspending. Channels in the queue
with inactive state set will be configured (bringup) while channels in
the queue with active state will be suspended (teardown). The request
configuration or suspending is being applied on the channel if it's in
invisible state.
* Failover, another inactive channel is selected as active, can happen when
the hardware arbitration is disabled. The failover can be caused by timeout
on link monitor and AEN.
* NCSI stack should be configurable through netlink or another mechanism, it's
not implemented in this patchset. It's something TBD.
* The first NIC driver that is aware of NCSI: drivers/net/ethernet/faraday/ftgmac100.c
Changelog
=========
v2 -> v3:
* Include (one line) change in include/uapi/linux/if_ether.h to fix build
error.
v1 -> v2:
* Support NCSI spec v1.1.0 (3 more commands and 4 hardware arbitration
modes added).
* Enable AEN packets according to the supported list.
* Introduce NCSI channel states and processing queue in order to support
the hardware arbitration.
* The hardware arbitration is supported (tested with emulated environment).
* Introduce link monitor with GLS (Get Link Status) command/response as part
of the error handling defined in NCSI spec.
* Support IPv6 address discovery when CONFIG_IPV6 is enabled.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Bogus PHY interrupts are observed. This masks the PHY interrupt
when the interface works in NCSI mode as there is no attached
PHY under the circumstance.
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Acked-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
This matches the driver with devices compatible with "faraday,ftgmac100"
declared in the device tree. Originally, device's name from device
tree for it.
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Acked-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
This makes ftgmac100 driver support NCSI mode. The NCSI is enabled
on the interface if property "use-nc-si" or "use-ncsi" is found from
the device node in device tree.
* No PHY device is used when NCSI mode is enabled.
* The NCSI device (struct ncsi_dev) is created when probing the
device while it's enabled/started when the interface is brought
up.
* Hardware IP checksum dosn't work when NCSI mode is enabled. It
is disabled on enabled NCSI.
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Acked-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
The device is assigned with random MAC address. It isn't reasonable.
An valid MAC address might have been provided by (uboot) firmware by
device-tree or in chip. It's reasonable to use it to maintain consistency.
This uses the MAC address from device-tree or that in the chip if it's
valid. Otherwise, a random MAC address is given as before.
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Acked-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
This introduces two helper functions to create or destroy MDIO
interface. No logical changes introduced except the proper MDIO
names are given when having more than one MDIO bus.
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Acked-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
