The assumption when adding the intel_display_power_is_enabled() checks
was that if it returns success the power can't be turned off afterwards
during the HW access, which is guaranteed by modeset locks. This isn't
always true, so make sure we hold a dedicated reference for the time of
the access.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1455296121-4742-5-git-send-email-imre.deak@intel.com
(cherry picked from commit 6392f8478e)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The assumption when adding the intel_display_power_is_enabled() checks
was that if it returns success the power can't be turned off afterwards
during the HW access, which is guaranteed by modeset locks. This isn't
always true, so make sure we hold a dedicated reference for the time of
the access.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1455296121-4742-4-git-send-email-imre.deak@intel.com
(cherry picked from commit 12fda3876d)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The assumption when adding the intel_display_power_is_enabled() checks
was that if it returns success the power can't be turned off afterwards
during the HW access, which is guaranteed by modeset locks. This isn't
always true, so make sure we hold a dedicated reference for the time of
the access.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Revieved-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1455296121-4742-3-git-send-email-imre.deak@intel.com
(cherry picked from commit 1729050eb4)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
We have many places in the code where we check if a given display power
domain is enabled and if so access registers backed by this power
domain. We assumed that some modeset lock will prevent the power
reference from vanishing in the middle of the HW access, but this
assumption doesn't always hold. In such cases we get either the wakeref
not held, or an unclaimed register access error message. To fix this in
a future-proof way that's independent of other locks wrap any such
access with a get_ref_if_enabled()/put_ref() pair.
Kudos to Ville and Joonas for the ideas of this new interface.
v2:
- init the power_domains ptr when declaring it everywhere (Joonas)
v3:
- don't report the device to be powered if runtime PM is disabled
CC: Mika Kuoppala <mika.kuoppala@intel.com>
CC: Chris Wilson <chris@chris-wilson.co.uk>
CC: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
CC: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1455711462-7442-1-git-send-email-imre.deak@intel.com
(cherry picked from commit 0973128002)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
bpf__apply_obj_config() is introduced as the core API to apply object
config options to all BPF objects. This patch also does the real work
for setting values for BPF_MAP_TYPE_PERF_ARRAY maps by inserting value
stored in map's private field into the BPF map.
This patch is required because we are not always able to set all BPF
config during parsing. Further patch will set events created by perf to
BPF_MAP_TYPE_PERF_EVENT_ARRAY maps, which is not exist until
perf_evsel__open().
bpf_map_foreach_key() is introduced to iterate over each key needs to be
configured. This function would be extended to support more map types
and different key settings.
In perf record, before start recording, call bpf__apply_config() to turn
on all BPF config options.
Test result:
# cat ./test_bpf_map_1.c
/************************ BEGIN **************************/
#include <uapi/linux/bpf.h>
#define SEC(NAME) __attribute__((section(NAME), used))
struct bpf_map_def {
unsigned int type;
unsigned int key_size;
unsigned int value_size;
unsigned int max_entries;
};
static void *(*map_lookup_elem)(struct bpf_map_def *, void *) =
(void *)BPF_FUNC_map_lookup_elem;
static int (*trace_printk)(const char *fmt, int fmt_size, ...) =
(void *)BPF_FUNC_trace_printk;
struct bpf_map_def SEC("maps") channel = {
.type = BPF_MAP_TYPE_ARRAY,
.key_size = sizeof(int),
.value_size = sizeof(int),
.max_entries = 1,
};
SEC("func=sys_nanosleep")
int func(void *ctx)
{
int key = 0;
char fmt[] = "%d\n";
int *pval = map_lookup_elem(&channel, &key);
if (!pval)
return 0;
trace_printk(fmt, sizeof(fmt), *pval);
return 0;
}
char _license[] SEC("license") = "GPL";
int _version SEC("version") = LINUX_VERSION_CODE;
/************************* END ***************************/
# echo "" > /sys/kernel/debug/tracing/trace
# ./perf record -e './test_bpf_map_1.c/map:channel.value=11/' usleep 10
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.012 MB perf.data ]
# cat /sys/kernel/debug/tracing/trace
# tracer: nop
#
# entries-in-buffer/entries-written: 1/1 #P:8
[SNIP]
# TASK-PID CPU# |||| TIMESTAMP FUNCTION
# | | | |||| | |
usleep-18593 [007] d... 2394714.395539: : 11
# ./perf record -e './test_bpf_map_1.c/map:channel.value=101/' usleep 10
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.012 MB perf.data ]
# cat /sys/kernel/debug/tracing/trace
# tracer: nop
#
# entries-in-buffer/entries-written: 1/1 #P:8
[SNIP]
# TASK-PID CPU# |||| TIMESTAMP FUNCTION
# | | | |||| | |
usleep-18593 [007] d... 2394714.395539: : 11
usleep-19000 [006] d... 2394831.057840: : 101
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Cody P Schafer <dev@codyps.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jeremie Galarneau <jeremie.galarneau@efficios.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kirill Smelkov <kirr@nexedi.com>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1456132275-98875-6-git-send-email-wangnan0@huawei.com
Signed-off-by: He Kuang <hekuang@huawei.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch adds the final step for BPF map configuration. A new syntax
is appended into parser so user can config BPF objects through '/' '/'
enclosed config terms.
After this patch, following syntax is available:
# perf record -e ./test_bpf_map_1.c/map:channel.value=10/ ...
It would takes effect after appling following commits.
Test result:
# cat ./test_bpf_map_1.c
/************************ BEGIN **************************/
#include <uapi/linux/bpf.h>
#define SEC(NAME) __attribute__((section(NAME), used))
struct bpf_map_def {
unsigned int type;
unsigned int key_size;
unsigned int value_size;
unsigned int max_entries;
};
static void *(*map_lookup_elem)(struct bpf_map_def *, void *) =
(void *)BPF_FUNC_map_lookup_elem;
static int (*trace_printk)(const char *fmt, int fmt_size, ...) =
(void *)BPF_FUNC_trace_printk;
struct bpf_map_def SEC("maps") channel = {
.type = BPF_MAP_TYPE_ARRAY,
.key_size = sizeof(int),
.value_size = sizeof(int),
.max_entries = 1,
};
SEC("func=sys_nanosleep")
int func(void *ctx)
{
int key = 0;
char fmt[] = "%d\n";
int *pval = map_lookup_elem(&channel, &key);
if (!pval)
return 0;
trace_printk(fmt, sizeof(fmt), *pval);
return 0;
}
char _license[] SEC("license") = "GPL";
int _version SEC("version") = LINUX_VERSION_CODE;
/************************* END ***************************/
- Normal case:
# ./perf record -e './test_bpf_map_1.c/map:channel.value=10/' usleep 10
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.012 MB perf.data ]
- Error case:
# ./perf record -e './test_bpf_map_1.c/map:channel.value/' usleep 10
event syntax error: '..ps:channel:value/'
\___ Config value not set (missing '=')
Hint: Valid config term:
map:[<arraymap>]:value=[value]
(add -v to see detail)
Run 'perf list' for a list of valid events
Usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
-e, --event <event> event selector. use 'perf list' to list available events
# ./perf record -e './test_bpf_map_1.c/xmap:channel.value=10/' usleep 10
event syntax error: '..pf_map_1.c/xmap:channel.value=10/'
\___ Invalid object config option
[SNIP]
# ./perf record -e './test_bpf_map_1.c/map:xchannel.value=10/' usleep 10
event syntax error: '..p_1.c/map:xchannel.value=10/'
\___ Target map not exist
[SNIP]
# ./perf record -e './test_bpf_map_1.c/map:channel.xvalue=10/' usleep 10
event syntax error: '..ps:channel.xvalue=10/'
\___ Invalid object map config option
[SNIP]
# ./perf record -e './test_bpf_map_1.c/map:channel.value=x10/' usleep 10
event syntax error: '..nnel.value=x10/'
\___ Incorrect value type for map
[SNIP]
Change BPF_MAP_TYPE_ARRAY to '1' in test_bpf_map_1.c:
# ./perf record -e './test_bpf_map_1.c/map:channel.value=10/' usleep 10
event syntax error: '..ps:channel.value=10/'
\___ Can't use this config term to this type of map
Hint: Valid config term:
map:[<arraymap>].value=[value]
(add -v to see detail)
Signed-off-by: Wang Nan <wangnan0@huawei.com>
[for parser part]
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Cody P Schafer <dev@codyps.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jeremie Galarneau <jeremie.galarneau@efficios.com>
Cc: Kirill Smelkov <kirr@nexedi.com>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1456132275-98875-5-git-send-email-wangnan0@huawei.com
Signed-off-by: He Kuang <hekuang@huawei.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
bpf__config_obj() is introduced as a core API to config BPF object after
loading. One configuration option of maps is introduced. After this
patch BPF object can accept assignments like:
map:my_map.value=1234
(map.my_map.value looks pretty. However, there's a small but hard to fix
problem related to flex's greedy matching. Please see [1]. Choose ':'
to avoid it in a simpler way.)
This patch is more complex than the work it does because the
consideration of extension. In designing BPF map configuration, the
following things should be considered:
1. Array indices selection: perf should allow user setting different
value for different slots in an array, with syntax like:
map:my_map.value[0,3...6]=1234;
2. A map should be set by different config terms, each for a part
of it. For example, set each slot to the pid of a thread;
3. Type of value: integer is not the only valid value type. A perf
counter can also be put into a map after commit 35578d7984
("bpf: Implement function bpf_perf_event_read() that get the
selected hardware PMU counter")
4. For a hash table, it should be possible to use a string or other
value as a key;
5. It is possible that map configuration is unable to be setup
during parsing. A perf counter is an example.
Therefore, this patch does the following:
1. Instead of updating map element during parsing, this patch stores
map config options in 'struct bpf_map_priv'. Following patches
will apply those configs at an appropriate time;
2. Link map operations in a list so a map can have multiple config
terms attached, so different parts can be configured separately;
3. Make 'struct bpf_map_priv' extensible so that the following patches
can add new types of keys and operations;
4. Use bpf_obj_config__map_funcs array to support more map config options.
Since the patch changing the event parser to parse BPF object config is
relative large, I've put it in another commit. Code in this patch can be
tested after applying the next patch.
[1] http://lkml.kernel.org/g/564ED621.4050500@huawei.com
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Cody P Schafer <dev@codyps.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jeremie Galarneau <jeremie.galarneau@efficios.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kirill Smelkov <kirr@nexedi.com>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1456132275-98875-4-git-send-email-wangnan0@huawei.com
Signed-off-by: He Kuang <hekuang@huawei.com>
[ Changes "maps:my_map.value" to "map:my_map.value", improved error messages ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The dynamic entry is created for each field in a tracepoint event.
Since they have no fixed hpp format index, it should skip when
perf_hpp__reset_width() is called.
This caused following assertion failure..
$ perf record -e sched:sched_switch -a sleep 1
$ perf report -s comm,next_pid --stdio
perf: ui/hist.c:651: perf_hpp__reset_width:
Assertion `!(fmt->idx >= PERF_HPP__MAX_INDEX)' failed.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1456064558-13086-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It missed to update column length of the 'trace' sort key in the
hists__calc_col_len() so it might truncate the output. It calculated
the column length in the ->cmp() callback originally but it doesn't
guarantee it's called always.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1456064558-13086-5-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The srcline, srcfile and trace sort keys can have long entries. With
commit 89fee70943 ("perf hists: Do column alignment on the format
iterator"), it now aligns output with hist_entry__snprintf_alignment().
So each (possibly long) sort entries don't need to do it themselves.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1456101153-14519-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Normally the hist entry's srcline and/or srcfile is set during sorting.
However sometime it's possible to a hist entry's srcline is not set yet
after the sorting. This is because the entry is so unique and other
sort keys already make it distinct. Then the srcline/file sort didn't
have a chance to be called during the sorting. In that case it has NULL
srcline/srcfile field and shows nothing.
Before:
$ perf report -s comm,sym,srcline
...
Overhead Command Symbol
-----------------------------------------------------------------
34.42% swapper [k] intel_idle intel_idle.c:0
2.44% perf [.] __poll_nocancel (null)
1.70% gnome-shell [k] fw_domains_get (null)
1.04% Xorg [k] sock_poll (null)
After:
34.42% swapper [k] intel_idle intel_idle.c:0
2.44% perf [.] __poll_nocancel .:0
1.70% gnome-shell [k] fw_domains_get fw_domains_get+42
1.04% Xorg [k] sock_poll socket.c:0
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1456101111-14400-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
A dynamic entry is created for each tracepoint event. When it sets up
the sort key, it checks with existing keys using ->equal() callback.
But it missed to set the ->equal for dynamic entries. The following
segfault was due to the missing ->equal() callback.
(gdb) bt
#0 0x0000000000140003 in ?? ()
#1 0x0000000000537769 in fmt_equal (b=0x2106980, a=0x21067a0) at ui/hist.c:548
#2 perf_hpp__setup_output_field (list=0x8c6d80 <perf_hpp_list>) at ui/hist.c:560
#3 0x00000000004e927e in setup_sorting (evlist=<optimized out>) at util/sort.c:2642
#4 0x000000000043cf50 in cmd_report (argc=<optimized out>, argv=<optimized out>, prefix=<optimized out>)
at builtin-report.c:932
#5 0x00000000004865a1 in run_builtin (p=p@entry=0x8bbce0 <commands+192>, argc=argc@entry=7,
argv=argv@entry=0x7ffd24d56ce0) at perf.c:390
#6 0x000000000042dc1f in handle_internal_command (argv=0x7ffd24d56ce0, argc=7) at perf.c:451
#7 run_argv (argv=0x7ffd24d56a70, argcp=0x7ffd24d56a7c) at perf.c:495
#8 main (argc=7, argv=0x7ffd24d56ce0) at perf.c:620
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1456064558-13086-2-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Older compilers don't like this, for instance, on RHEL6.7:
CC /tmp/build/perf/util/parse-events.o
util/parse-events.c:844: error: redefinition of typedef ‘config_term_func_t’
util/parse-events.c:353: note: previous declaration of ‘config_term_func_t’ was here
So remove the second definition, that should've been just moved in 43d0b97817
("perf tools: Enable config and setting names for legacy cache events"), not copied.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: 43d0b97817 ("perf tools: Enable config and setting names for legacy cache events")
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In RHEL 6.7:
CC /tmp/build/perf/util/parse-events.o
cc1: warnings being treated as errors
util/parse-events.c: In function ‘parse_events_add_cache’:
util/parse-events.c:366: error: declaration of ‘error’ shadows a global declaration
util/util.h:136: error: shadowed declaration is here
Rename it to 'err'.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: 43d0b97817 ("perf tools: Enable config and setting names for legacy cache events")
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
git commit 904818e2f2
"s390/kernel: introduce fpu-internal.h with fpu helper functions"
introduced the fpregs_store / fp_regs_load helper. These function
fail to save and restore the floating pointer control registers.
The effect is that the FPC is not correctly handled on signal
delivery and signal return.
Cc: stable@vger.kernel.org # 4.4
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
git commit 8070361799
"s390: add support for vector extension"
broke 31-bit compat processes in regard to signal handling.
The restore_sigregs_ext32() function is used to restore the additional
elements from the user space signal frame. Among the additional elements
are the upper registers halves for 64-bit register support for 31-bit
processes. The copy_from_user that is used to retrieve the high-gprs
array from the user stack uses an incorrect length, 8 bytes instead of
64 bytes. This causes incorrect upper register halves to get loaded.
Cc: stable@vger.kernel.org # 3.8+
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
We can get a hash pte fault with 4k base page size and find the pte
already inserted with 64K base page size. In that case we need to clear
the existing slot information from the old pte. Fix this correctly
With THP, we also clear the slot information with respect to all
the 64K hash pte mapping that 16MB page. They are all invalid
now. This make sure we don't find the slot valid when we fault with
4k base page size. Finding the slot valid should not result in any wrong
behavior because we do check again in hash page table for the validity.
But we can avoid that check completely.
Fixes: a43c0eb836 ("powerpc/mm: Convert 4k hash insert to C")
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
During error recovery, the device could be removed as part of the
partial hotplug. The criterion used to come with partial hotplug
is: if the device driver provides error_detected(), slot_reset()
and resume() callbacks, it's immune from hotplug. Otherwise,
it's going to experience partial hotplug during EEH recovery. But
the criterion isn't correct enough: mlx4_core driver for Mellanox
adapters provides error_detected(), slot_reset() callbacks, but
resume() isn't there. Those Mellanox adapters won't be to involved
in the partial hotplug.
This fixes the criterion to a practical one: adpater with driver
that provides error_detected(), slot_reset() will be immune from
partial hotplug. resume() isn't mandatory.
Fixes: f2da4ccf ("powerpc/eeh: More relaxed hotplug criterion")
Cc: stable@vger.kernel.org #v4.4+
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
-----BEGIN PGP SIGNATURE-----
iQEcBAABCgAGBQJWycVaAAoJED07qiWsqSVqhoIIAKNVMLApOlvduZ2JQYSUJ+tC
IWjRSuB3sOwCIMKx4DXWhovkTU6j00jxQiEHF5phSOA9n5n+wwJMhgZQeOehAYoS
smwkKMjJhgvEd4lZ7+OBWj6Xi1mStU3ddYYubE7MkTE/4E6vsnJ6/iVbCyIv4d0F
7zGnWaq/bca+ccZyrVO9hk3mg8ZD+2L6hGR47E5vWerR4mupifMK0LvmfgIPBsMk
FVMKhddDek2xUTZxdUesXCvAoOewSfhFbNG3uMH6AFKVjEhFoEC8c0Wn7zLrJ5Zn
FCec9e4qXRHwQo1MgobLn6SXgrwEoPqXUFTQfNVG8rYkX/vXScXX9V7JZCCuC8U=
=0Qdk
-----END PGP SIGNATURE-----
Merge tag 'linux-can-fixes-for-4.5-20160221' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2016-02-21
this is a pull reqeust of one patch for net/master.
The patch is by Gerhard Uttenthaler and fixes a potential tx overflow in the
ems_usb driver.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Yuval Mintz says:
====================
bnx2x: Fix 848xx phys
This series contains link-related fixes, mostly for the 848xx phys
[2 patches are for 84833, and 2 patches are for 84858].
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Current initialization sequence is lacking, causing some configurations
to fail.
Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The phy's firmware version isn't being parsed properly as it's
currently parsed like the rest of the 848xx phys.
Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There's a problem in current 84833 phy configuration -
in case 1Gb link is configured and jumbo-sized packets are being
used, device will experience RX crc errors.
Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, when link is using KR2 it cannot be forced to any speed other
than 20g.
Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.om>
Signed-off-by: David S. Miller <davem@davemloft.net>
Johan Hedberg says:
====================
pull request: bluetooth 2016-02-20
Here's an important patch for 4.5 which fixes potential invalid pointer
access when processing completed Bluetooth HCI commands.
Please let me know if there are any issues pulling. Thanks.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The dm9000 driver doesn't work in at least one device-tree
configuration, spitting an error message on irq resource :
[ 1.062495] dm9000 8000000.ethernet: insufficient resources
[ 1.068439] dm9000 8000000.ethernet: not found (-2).
[ 1.073451] dm9000: probe of 8000000.ethernet failed with error -2
The reason behind is that the interrupt might be provided by a gpio
controller, not probed when dm9000 is probed, and needing the probe
deferral mechanism to apply.
Currently, the interrupt is directly taken from resources. This patch
changes this to use the more generic platform_get_irq(), which handles
the deferral.
Moreover, since commit Fixes: 7085a7401b ("drivers: platform: parse
IRQ flags from resources"), the interrupt trigger flags are honored in
platform_get_irq(), so remove the needless code in dm9000.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Acked-by: Marcel Ziswiler <marcel@ziswiler.com>
Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Tested-by: Sergei Ianovich <ynvich@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
fix incorrect indexing of dev->dev_addr[] when copying the MAC address
of FMV-J182 at buf[5].
Signed-off-by: Ken Kawasaki <ken_kawasaki@nifty.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Device emulation supports max size of 4096.
Signed-off-by: Shrikrishna Khare <skhare@vmware.com>
Signed-off-by: Bhavesh Davda <bhavesh@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Murali Karicheri says:
====================
net: ti: netcp: restore get/set_pad_info() functionality
This series fixes a regression and add some improvements for the ease
of maintainance. Incorporated comments against v1.
Changelogs:
v2 : combined 2-3 into one patch as this involves a header change
fixed a parse warning in 3/4 per comment from Arnd.
Removed Sign-off from Arnd against 1/4
added comments in 3/3 to alert on the usage of sw data per review
comments
v1 : added 2-4 to accomodate feedback received from review
v0 : initial version to fix the regression (From Grygorii)
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
SW data field in descriptor can be used by software to hold private
data for the driver. As there are 4 words available for this purpose,
use separate macros to place it or retrieve the same to/from
descriptors. Also do type cast of data types accordingly.
Cc: Wingman Kwok <w-kwok2@ti.com>
Cc: Mugunthan V N <mugunthanvnm@ti.com>
CC: Arnd Bergmann <arnd@arndb.de>
CC: Grygorii Strashko <grygorii.strashko@ti.com>
CC: David Laight <David.Laight@ACULAB.COM>
Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rename the pad to sw_data as per description of this field in the hardware
spec(refer sprugr9 from www.ti.com). Latest version of the document is
at http://www.ti.com/lit/ug/sprugr9h/sprugr9h.pdf and section 3.1
Host Packet Descriptor describes this field.
Define and use a constant for the size of sw_data field similar to
other fields in the struct for desc and document the sw_data field
in the header. As the sw_data is not touched by hw, it's type can be
changed to u32.
Rename the helpers to match with the updated dma desc field sw_data.
Cc: Wingman Kwok <w-kwok2@ti.com>
Cc: Mugunthan V N <mugunthanvnm@ti.com>
CC: Arnd Bergmann <arnd@arndb.de>
CC: Grygorii Strashko <grygorii.strashko@ti.com>
CC: David Laight <David.Laight@ACULAB.COM>
Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
The commit 8990777914 ("netcp: try to reduce type confusion in
descriptors") introduces a regression in Kernel 4.5-rc1 and it breaks
get/set_pad_info() functionality.
The TI NETCP driver uses pad0 and pad1 fields of knav_dma_desc to
store DMA/MEM buffer pointer and buffer size respectively. And in both
cases for Keystone 2 the pointer type size is 32 bit regardless of
LAPE enabled or not, because CONFIG_ARCH_DMA_ADDR_T_64BIT originally
is not expected to be defined.
Unfortunately, above commit changed buffer's pointers save/restore
code (get/set_pad_info()) and added intermediate conversation to u64
which works incorrectly on 32bit Keystone 2 and causes TI NETCP driver
crash in RX/TX path due to "Unable to handle kernel NULL pointer"
exception. This issue was reported and discussed in [1].
Hence, fix it by partially reverting above commit and restoring
get/set_pad_info() functionality as it was before.
[1] https://www.mail-archive.com/netdev@vger.kernel.org/msg95361.html
Cc: Wingman Kwok <w-kwok2@ti.com>
Cc: Mugunthan V N <mugunthanvnm@ti.com>
CC: David Laight <David.Laight@ACULAB.COM>
CC: Arnd Bergmann <arnd@arndb.de>
Reported-by: Franklin S Cooper Jr <fcooper@ti.com>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Wei has been picking this up for quite a while now.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Cc: Wei Liu <wei.liu2@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Dmitry Vyukov noted recently that the sctp_port_hashtable had an error in
its size computation, observing that the current method never guaranteed
that the hashsize (measured in number of entries) would be a power of two,
which the input hash function for that table requires. The root cause of
the problem is that two values need to be computed (one, the allocation
order of the storage requries, as passed to __get_free_pages, and two the
number of entries for the hash table). Both need to be ^2, but for
different reasons, and the existing code is simply computing one order
value, and using it as the basis for both, which is wrong (i.e. it assumes
that ((1<<order)*PAGE_SIZE)/sizeof(bucket) is still ^2 when its not).
To fix this, we change the logic slightly. We start by computing a goal
allocation order (which is limited by the maximum size hash table we want
to support. Then we attempt to allocate that size table, decreasing the
order until a successful allocation is made. Then, with the resultant
successful order we compute the number of buckets that hash table supports,
which we then round down to the nearest power of two, giving us the number
of entries the table actually supports.
I've tested this locally here, using non-debug and spinlock-debug kernels,
and the number of entries in the hashtable consistently work out to be
powers of two in all cases.
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
CC: Dmitry Vyukov <dvyukov@google.com>
CC: Vladislav Yasevich <vyasevich@gmail.com>
CC: "David S. Miller" <davem@davemloft.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Patch <703df6c097> ("power: bq27xxx_battery: Reorganize I2C
into a module") has removed the device name numbering from
bq27xxx_battery_i2c_probe. Fix that by restoring the code.
Fixes: 703df6c097
Signed-off-by: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>
Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
Tested-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Update reviewers for bq27xxx, so that Pali and Andrew
are reviewers with status and maintainer inherited from
the power supply subsystem entry.
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Acked-by: Pali Rohár <pali.rohar@gmail.com>
Acked-by: Andrew F. Davis <afd@ti.com>
This patch fixes the problem that more CAN messages could be sent to the
interface as could be send on the CAN bus. This was more likely for slow baud
rates. The sleeping _start_xmit was woken up in the _write_bulk_callback. Under
heavy TX load this produced another bulk transfer without checking the
free_slots variable and hence caused the overflow in the interface.
Signed-off-by: Gerhard Uttenthaler <uttenthaler@ems-wuensche.com>
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
There's one point was missed in the patch commit da49889deb ("staging:
binder: Support concurrent 32 bit and 64 bit processes."). When configure
BINDER_IPC_32BIT, the size of binder_uintptr_t was 32bits, but size of
void * is 64bit on 64bit system. Correct it here.
Signed-off-by: Lisa Du <cldu@marvell.com>
Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Fixes: da49889deb ("staging: binder: Support concurrent 32 bit and 64 bit processes.")
Cc: <stable@vger.kernel.org>
Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit d8f00cd685.
Tony writes:
This upstream commit is causing an oops:
d8f00cd685 ("usb: hub: do not clear BOS field during reset device")
This patch has already been included in several -stable kernels. Here
are the affected kernels:
4.5.0-rc4 (current git)
4.4.2
4.3.6 (currently in review)
4.1.18
3.18.27
3.14.61
How to reproduce the problem:
Boot kernel with slub debugging enabled (otherwise memory corruption
will cause random oopses later instead of immediately)
Plug in USB 3.0 disk to xhci USB 3.0 port
dd if=/dev/sdc of=/dev/null bs=65536
(where /dev/sdc is the USB 3.0 disk)
Unplug USB cable while dd is still going
Oops is immediate:
Reported-by: Tony Battersby <tonyb@cybernetics.com>
Cc: Du, Changbin <changbin.du@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Here are some new device ids.
Signed-off-by: Johan Hovold <johan@kernel.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=eFQw
-----END PGP SIGNATURE-----
Merge tag 'usb-serial-4.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus
Johan writes:
USB-serial fixes for v4.5-rc5
Here are some new device ids.
Signed-off-by: Johan Hovold <johan@kernel.org>
Pull x86 fixes from Ingo Molnar:
"This is unusually large, partly due to the EFI fixes that prevent
accidental deletion of EFI variables through efivarfs that may brick
machines. These fixes are somewhat involved to maintain compatibility
with existing install methods and other usage modes, while trying to
turn off the 'rm -rf' bricking vector.
Other fixes are for large page ioremap()s and for non-temporal
user-memcpy()s"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm: Fix vmalloc_fault() to handle large pages properly
hpet: Drop stale URLs
x86/uaccess/64: Handle the caching of 4-byte nocache copies properly in __copy_user_nocache()
x86/uaccess/64: Make the __copy_user_nocache() assembly code more readable
lib/ucs2_string: Correct ucs2 -> utf8 conversion
efi: Add pstore variables to the deletion whitelist
efi: Make efivarfs entries immutable by default
efi: Make our variable validation list include the guid
efi: Do variable name validation tests in utf8
efi: Use ucs2_as_utf8 in efivarfs instead of open coding a bad version
lib/ucs2_string: Add ucs2 -> utf8 helper functions
Pull perf fixes from Ingo Molnar:
"A handful of CPU hotplug related fixes"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/core: Plug potential memory leak in CPU_UP_PREPARE
perf/core: Remove the bogus and dangerous CPU_DOWN_FAILED hotplug state
perf/core: Remove bogus UP_CANCELED hotplug state
perf/x86/amd/uncore: Plug reference leak
- Fix build error on 32-bit with checkpoint restart from Aneesh Kumar
- Fix dedotify for binutils >= 2.26 from Andreas Schwab
- Don't trace hcalls on offline CPUs from Denis Kirjanov
- eeh: Fix stale cached primary bus from Gavin Shan
- eeh: Fix stale PE primary bus from Gavin Shan
- mm: Fix Multi hit ERAT cause by recent THP update from Aneesh Kumar K.V
- ioda: Set "read" permission when "write" is set from Alexey Kardashevskiy
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=7Yzi
-----END PGP SIGNATURE-----
Merge tag 'powerpc-4.5-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fix build error on 32-bit with checkpoint restart from Aneesh Kumar
- Fix dedotify for binutils >= 2.26 from Andreas Schwab
- Don't trace hcalls on offline CPUs from Denis Kirjanov
- eeh: Fix stale cached primary bus from Gavin Shan
- eeh: Fix stale PE primary bus from Gavin Shan
- mm: Fix Multi hit ERAT cause by recent THP update from Aneesh Kumar K.V
- ioda: Set "read" permission when "write" is set from Alexey Kardashevskiy
* tag 'powerpc-4.5-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/ioda: Set "read" permission when "write" is set
powerpc/mm: Fix Multi hit ERAT cause by recent THP update
powerpc/powernv: Fix stale PE primary bus
powerpc/eeh: Fix stale cached primary bus
powerpc/pseries: Don't trace hcalls on offline CPUs
powerpc: Fix dedotify for binutils >= 2.26
powerpc/book3s_32: Fix build error with checkpoint restart
Few fixes on drivers nothing major here.
Fixes are: iotdma fix to restart channels, new ID for wildcat
PCH, residue fix for edma, disable irq for non-cyclic in dw.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJWyBF/AAoJEHwUBw8lI4NH1ckP/2Ht39D0EFm/PnEkUZCzCixv
zYKvsL8gniKEUWSlPjUGQQ0yY/z6WRatihHEMl/6bmXIvR1l6NJCWOMI/HRZQAeR
izpkNpaSo8uyl3NrQ8IMAuJzqgibn2QuyqjAHsgfyCHrDLVS+/LK4H5PMOvyboJA
BhP22GkbOPCDoW7R8ddqQYXQidwLjezBuNrDncox2wXZ7WoQa7xaxSeFt2RiCMKr
nTCHKaX27Tsn3CMyiFODLcIP/soNvWrA6DQkPqluqAmBt5b7GS1eiqF8JvBLQa4/
RUkZuMN5gKnbaNzlYvY2+cOe2BRpWihvfEwm5Fu7ZBgNrzOwrBvUjmG76SCVlZ4O
Azp2SF8kjwwDJOzjlKAJFHyihL9nNZySRyZ1N89zInPBegal13P7Ai9e5aAOLs/e
mH5WfbiCAhXcaX8vQ5Cdu1sHj0T749Q4h+TIGL9T0CJZf9kVcy/XvD+I4SplzmBC
zOgAyAda3EEiZGHiifxPim9f95O9OcHQanKHCc5gflcN8tPKot8qJBhMOP2lwl99
i4IOHK+2KDq1maF/dwAMH/7vX0VfHYyXs75VQtSA6MLguaqflBbB0oDhPnHt+amY
VSdZoYtt/mgzptcEbGIQG8m2w5AhhJMOJFmyXJsUXqLCY682nifeEj0/rXpuqm60
9gfhkM6gIALKcYiOUfbA
=Qs4V
-----END PGP SIGNATURE-----
Merge tag 'dmaengine-fix-4.5-rc5' of git://git.infradead.org/users/vkoul/slave-dma
Pull dmaengine fixes from Vinod Koul:
"A few fixes for drivers, nothing major here.
Fixes are: iotdma fix to restart channels, new ID for wildcat PCH,
residue fix for edma, disable irq for non-cyclic in dw"
* tag 'dmaengine-fix-4.5-rc5' of git://git.infradead.org/users/vkoul/slave-dma:
dmaengine: dw: disable BLOCK IRQs for non-cyclic xfer
dmaengine: edma: fix residue race for cyclic
dmaengine: dw: pci: add ID for WildcatPoint PCH
dmaengine: IOATDMA: fix timer code that continues to restart channels during idle
