Global variables are undesirable unless they are read only. Removed by
instead using an already defined Station Control Block variable in a
per-device structure.
Reported-by: Johannes Berg <johannes@sipsolutions.net>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Global variables are undesirable unless they are read only. Variables are
now maintained in a device specific structure.
Reported-by: Johannes Berg <johannes@sipsolutions.net>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Several callback were implemented without executing any further
function calls into the driver. Review feedback indicated that
these could be removed.
Reported-by: Johannes Berg <johannes@sipsolutions.net>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
When the device dies the driver could extract cpu registers on
the device to analyze the trap handling on the dongle. As the
firmware with this driver is stable this code does not belong
in the brcmfmac driver.
Reported-by: Johannes Berg <johannes@sipsolutions.net>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
For chip initialisation of the wme parameters a table is used, but
it was not marked as constant.
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The function is not used in the driver and has been removed.
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
In the transmit path the field seq_ctrl is filled in, but the fragment
number was not properly determined.
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The field ht_cap was typed ieee80211_ht_cap from ieee80211.h. This
contained little endian annotated field cap_info resulting in sparse
endian warnings. It turned out the driver was setting the field, but
it was actually never used. Therefore it has been removed.
Reported-by: Johannes Berg <johannes@sipsolutions.net>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
WAR16165 is only used on older PCI chips, the driver does not support
these chips.
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Moved global vars into a per-device structure.
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
After initialization ('attach'), this struct member always pointed at
the same memory as wlc->bsscfg.
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
List always had one element. Converted the array to a scalar.
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Parameter 's2' was unused. Affected function was only used internally
to main.c and has been made static and moved above its callers.
Reported-by: Johannes Berg <johannes@sipsolutions.net>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Using a block statement to scope function variables is not
common in linux kernel development. Browsed through the brcmsmac
to remove those.
Reported-by: Johannes Berg <johannes@sipsolutions.net>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Since they are assuming it is there implicitly and will fail otherwise
with things like:
drivers/staging/iio/impedance-analyzer/ad5933.c:816: warning: type
defaults to ‘int’ in declaration of ‘MODULE_AUTHOR’
drivers/staging/iio/adc/ad7280a.c:990: warning: type defaults to ‘int’
in declaration of ‘MODULE_AUTHOR’
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
include module.h to fix the following compile errors:
drivers/staging/intel_sst/intelmid.c:52: error: expected declaration specifiers or '...' before string constant
drivers/staging/intel_sst/intelmid.c:52: warning: data definition has no type or storage class
drivers/staging/intel_sst/intelmid.c:52: warning: type defaults to 'int' in declaration of 'MODULE_AUTHOR'
drivers/staging/intel_sst/intelmid.c:52: warning: function declaration isn't a prototype
drivers/staging/intel_sst/intelmid.c:53: error: expected declaration specifiers or '...' before string constant
drivers/staging/intel_sst/intelmid.c:53: warning: data definition has no type or storage class
drivers/staging/intel_sst/intelmid.c:53: warning: type defaults to 'int' in declaration of 'MODULE_AUTHOR'
drivers/staging/intel_sst/intelmid.c:53: warning: function declaration isn't a prototype
drivers/staging/intel_sst/intelmid.c:54: error: expected declaration specifiers or '...' before string constant
drivers/staging/intel_sst/intelmid.c:54: warning: data definition has no type or storage class
drivers/staging/intel_sst/intelmid.c:54: warning: type defaults to 'int' in declaration of 'MODULE_AUTHOR'
drivers/staging/intel_sst/intelmid.c:54: warning: function declaration isn't a prototype
drivers/staging/intel_sst/intelmid.c:55: error: expected declaration specifiers or '...' before string constant
drivers/staging/intel_sst/intelmid.c:55: warning: data definition has no type or storage class
drivers/staging/intel_sst/intelmid.c:55: warning: type defaults to 'int' in declaration of 'MODULE_AUTHOR'
drivers/staging/intel_sst/intelmid.c:55: warning: function declaration isn't a prototype
drivers/staging/intel_sst/intelmid.c:56: error: expected declaration specifiers or '...' before string constant
drivers/staging/intel_sst/intelmid.c:56: warning: data definition has no type or storage class
drivers/staging/intel_sst/intelmid.c:56: warning: type defaults to 'int' in declaration of 'MODULE_DESCRIPTION'
drivers/staging/intel_sst/intelmid.c:56: warning: function declaration isn't a prototype
drivers/staging/intel_sst/intelmid.c:57: error: expected declaration specifiers or '...' before string constant
drivers/staging/intel_sst/intelmid.c:57: warning: data definition has no type or storage class
drivers/staging/intel_sst/intelmid.c:57: warning: type defaults to 'int' in declaration of 'MODULE_LICENSE'
drivers/staging/intel_sst/intelmid.c:57: warning: function declaration isn't a prototype
drivers/staging/intel_sst/intelmid.c:58: error: expected declaration specifiers or '...' before string constant
drivers/staging/intel_sst/intelmid.c:58: warning: data definition has no type or storage class
drivers/staging/intel_sst/intelmid.c:58: warning: type defaults to 'int' in declaration of 'MODULE_SUPPORTED_DEVICE'
drivers/staging/intel_sst/intelmid.c:58: warning: function declaration isn't a prototype
drivers/staging/intel_sst/intelmid.c:64: error: expected ')' before 'int'
drivers/staging/intel_sst/intelmid.c:65: error: expected ')' before string constant
drivers/staging/intel_sst/intelmid.c:66: error: expected ')' before numeric constant
drivers/staging/intel_sst/intelmid.c:67: error: expected ')' before string constant
drivers/staging/intel_sst/intelmid.c:461: warning: data definition has no type or storage class
drivers/staging/intel_sst/intelmid.c:461: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL_GPL'
drivers/staging/intel_sst/intelmid.c:461: warning: parameter names (without types) in function declaration
drivers/staging/intel_sst/intelmid.c:475: warning: data definition has no type or storage class
drivers/staging/intel_sst/intelmid.c:475: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL_GPL'
drivers/staging/intel_sst/intelmid.c:475: warning: parameter names (without types) in function declaration
drivers/staging/intel_sst/intelmid.c: In function 'snd_intelmad_probe':
drivers/staging/intel_sst/intelmid.c:859: error: 'THIS_MODULE' undeclared (first use in this function)
drivers/staging/intel_sst/intelmid.c:859: error: (Each undeclared identifier is reported only once
drivers/staging/intel_sst/intelmid.c:859: error: for each function it appears in.)
drivers/staging/intel_sst/intelmid.c: At top level:
drivers/staging/intel_sst/intelmid.c:989: error: 'THIS_MODULE' undeclared here (not in a function)
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Lu Guanqun <guanqun.lu@intel.com>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
These are now handled through the chan_spec arrays and no one
is using them anymore.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
id wasn't used anywhere and st->irq can be removed by simply
passing it into the core remove function (trivially available in
the two bus implementations).
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Other than a few slight refactorings the local version was pretty standard
so replace it and rework to get rid of st->d_size which it setup.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
To my mind, if a gpio is specified in the board file, yet fails
to be successfully requested, that is an error condidtion and
the driver should not muddle on regardless.
This does mean unwinding the gpios on error. Also the free_gpios
function is reordered so that it is consistent with the request one
(reverse order obviously).
This patch is the category of not technically fixing anything, just
making the driver be more in line with what a reviewer will expect.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
IIO_CHAN is being phased out and in this case things are so
simple it makes sense to have a local one parameter equivalent.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Saves on setting the value of address for the simple situation seen in this
device. They are already used interchangably to get data from the buffer.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is much cleaner than bouncing through the various structures
to get to the same thing.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Preparation for moving driver out of staging.
That macro is a nightmare to maintain so it is going away.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
A few of these had the wrong shifts, which would lead to
userspace hacking off the top couple of bits. Also, one
part had the wrong accuracy.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Simon Kirby reported that on his RAID setup with idedisk underneath
the box OOMs after a couple of days of runtime. Running with
CONFIG_DEBUG_KMEMLEAK pointed to idedisk_prep_fn() which unconditionally
allocates an ide_cmd struct. However, ide_requeue_and_plug() can be
called more than once per request, either from the request issue or the
IRQ handler path and do blk_peek_request() ends up in idedisk_prep_fn()
repeatedly, allocating a struct ide_cmd everytime and "forgetting" the
previous pointer.
Make sure the code reuses the old allocated chunk.
Reported-and-tested-by: Simon Kirby <sim@hostway.ca>
Cc: <stable@kernel.org> [ 39.x, 3.0.x ]
Link: http://marc.info/?l=linux-kernel&m=131667641517919
Link: http://lkml.kernel.org/r/20110922072643.GA27232@hostway.ca
Signed-off-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
The pch_gbe driver has an issue which a network stops,
when receiving traffic is high.
In the case, The link down and up are necessary to return a network.
This patch fixed this issue.
Signed-off-by: Toshiharu Okada <toshiharu-linux@dsn.okisemi.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When a link was downed during network use,
there is an issue on which PC freezes.
This patch fixed this issue.
Signed-off-by: Toshiharu Okada <toshiharu-linux@dsn.okisemi.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is a minor change.
Up until kernel 2.6.32, getsockopt(fd, SOL_PACKET, PACKET_STATISTICS,
...) would return total and dropped packets since its last invocation. The
introduction of socket queue overflow reporting [1] changed drop
rate calculation in the normal packet socket path, but not when using a
packet ring. As a result, the getsockopt now returns different statistics
depending on the reception method used. With a ring, it still returns the
count since the last call, as counts are incremented in tpacket_rcv and
reset in getsockopt. Without a ring, it returns 0 if no drops occurred
since the last getsockopt and the total drops over the lifespan of
the socket otherwise. The culprit is this line in packet_rcv, executed
on a drop:
drop_n_acct:
po->stats.tp_drops = atomic_inc_return(&sk->sk_drops);
As it shows, the new drop number it taken from the socket drop counter,
which is not reset at getsockopt. I put together a small example
that demonstrates the issue [2]. It runs for 10 seconds and overflows
the queue/ring on every odd second. The reported drop rates are:
ring: 16, 0, 16, 0, 16, ...
non-ring: 0, 15, 0, 30, 0, 46, 0, 60, 0 , 74.
Note how the even ring counts monotonically increase. Because the
getsockopt adds tp_drops to tp_packets, total counts are similarly
reported cumulatively. Long story short, reinstating the original code, as
the below patch does, fixes the issue at the cost of additional per-packet
cycles. Another solution that does not introduce per-packet overhead
is be to keep the current data path, record the value of sk_drops at
getsockopt() at call N in a new field in struct packetsock and subtract
that when reporting at call N+1. I'll be happy to code that, instead,
it's just more messy.
[1] http://patchwork.ozlabs.org/patch/35665/
[2] http://kernel.googlecode.com/files/test-packetsock-getstatistics.c
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If a VM is saved and restored (or migrated) the netback driver will no
longer process any Tx packets from the frontend. xenvif_up() does not
schedule the processing of any pending Tx requests from the front end
because the carrier is off. Without this initial kick the frontend
just adds Tx requests to the ring without raising an event (until the
ring is full).
This was caused by 47103041e9 (net:
xen-netback: convert to hw_features) which reordered the calls to
xenvif_up() and netif_carrier_on() in xenvif_connect().
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
During a test where a pair of bonding interfaces using ARP monitoring
were both brought up and torn down (with an rmmod) repeatedly, a panic
in the timer code was noticed. I tracked this down and determined that
any of the bonding functions that ran as workqueue handlers and requeued
more work might not properly exit when the module was removed.
There was a flag protected by the bond lock called kill_timers that is
set when the interface goes down or the module is removed, but many of
the functions that monitor link status now unlock the bond lock to take
rtnl first. There is a chance that another CPU running the rmmod could
get the lock and set kill_timers after the first check has passed.
This patch does not allow any function to queue work that will make
itself run unless kill_timers is not set. I also noticed while doing
this work that bond_resend_igmp_join_requests did not have a check for
kill_timers, so I added the needed call there as well.
Signed-off-by: Andy Gospodarek <andy@greyhouse.net>
Reported-by: Liang Zheng <lzheng@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Apart from the obvious cleanup, this should make the line
cursor_end = x - xorigin + w;
correct now.
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fixes cursor disappearing prematurely when moving off a top/left edge which
is not located at the desktop top/left edge.
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Cc: stable@kernel.org
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
The mouse cursor hotspot calculation when the cursor is partially off the
top or left side of the screen was off by one.
Fixes https://bugs.freedesktop.org/show_bug.cgi?id=41158
Signed-off-by: Nicholas Miell <nmiell@gmail.com>
Reviewed-by: Michel Dänzer <michel@daenzer.net>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Only disable the pipe if the monitor is physically
disconnected. The previous logic also disabled the
pipe if the link was trained.
Fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=41248
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
The previous code could potentially loop forever. Limit
the number of DP aux defer retries to 4 for native aux
transactions, same as i2c over aux transactions.
Noticed by: Brad Campbell <lists2009@fnarfbargle.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Brad Campbell <lists2009@fnarfbargle.com>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
An incorrect ordering in the error checking code lead
to DP aux defer being skipped in the aux native write
path. Move the bytes transferred check (ret == 0)
below the defer check.
Tracked down by: Brad Campbell <brad@fnarfbargle.com>
Fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=41121
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Brad Campbell <brad@fnarfbargle.com>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
