Commit graph

150997 commits

Author SHA1 Message Date
Eric Miao
361778d6e7 [ARM] pxa/littleton: add support for the Micro-SD slot (MMC1)
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-06-05 16:49:26 +08:00
Simon POLETTE
add85a418f PATCH] mx27pdk: rename mxc_map_io to mx27_map_io
Hi,
Fixed issue in the mxc-master head :

Signed-off-by: Simon POLETTE <spolette@adnlysd018.(none)>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-06-05 10:02:26 +02:00
Steven Whitehouse
f6d03139d7 GFS2: Fix locking issue mounting gfs2meta fs
This patch uses sget() to get a reference to the
existing gfs2 sb when mouting the gfs2meta filesystem
(in fact thats just another mount of the gfs2
filesystem with a different root and this interface
is for backward compatibility).

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Reported-by: Benjamin Marzinski <bmarzins@redhat.com>
Tested-by: Benjamin Marzinski <bmarzins@redhat.com>
Cc: Christoph Hellwig <hch@infradead.org>
2009-06-05 08:35:15 +01:00
Takashi Iwai
42a0b31827 ALSA: ctxfi - Fix endian-dependent codes
The UAA-mode check in hwct20k1.c is implemented with the endian-dependent
codes.  Fix to be more portable (and readable).

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-06-05 09:29:22 +02:00
Takashi Iwai
6d74b86d3c ALSA: ctxfi - Allow 64bit DMA
emu20kx chips support 64bit address PTE.  Allow the DMA bit mask to
accept 64bit address, too.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-06-05 09:26:41 +02:00
Yong Wang
ee7b31fe5c perf_counter tools: Fix incorrect printf formats
Otherwise the code does not compile on 32-bit boxes.

builtin-report.c: In function 'map__fprintf':
builtin-report.c:240: error: format '%lx' expects type 'long unsigned int', but argument 3 has type 'uint64_t'
builtin-report.c:240: error: format '%lx' expects type 'long unsigned int', but argument 4 has type 'uint64_t'
builtin-report.c:240: error: format '%lx' expects type 'long unsigned int', but argument 5 has type 'uint64_t'

Signed-off-by: Yong Wang <yong.y.wang@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <20090605033735.GA20451@ywang-moblin2.bj.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-05 08:22:27 +02:00
Paul Mackerras
6dc5f2a417 perf_counter: Fix lockup with interrupting counters
Commit 8e3747c1 ("perf_counter: Change data head from u32 to u64")
changed the type of 'head' in struct perf_mmap_data from atomic_t
to atomic_long_t, but missed converting one use of atomic_read on
it to atomic_long_read.  The effect of using atomic_read rather than
atomic_long_read on powerpc (and other big-endian architectures) is
that we get the high half of the 64-bit quantity, resulting in the
cmpxchg retry loop in perf_output_begin spinning forever as soon as
data->head becomes non-zero.  On little-endian architectures such as
x86 we would get the low half, resulting in a lockup once data->head
becomes greater than 4G.

This fixes it by using atomic_long_read rather than atomic_read.

[ Impact: fix perfcounter lockup on PowerPC / big-endian systems ]

Signed-off-by: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <18984.33964.21541.743096@cargo.ozlabs.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-05 08:22:26 +02:00
Aneesh Kumar K.V
f8514083cd ext4: truncate the file properly if we fail to copy data from userspace
In generic_perform_write if we fail to copy the user data we don't
update the inode->i_size.  We should truncate the file in the above
case so that we don't have blocks allocated outside inode->i_size.  Add
the inode to orphan list in the same transaction as block allocation
This ensures that if we crash in between the recovery would do the
truncate.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
CC:  Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2009-06-05 00:56:49 -04:00
Aneesh Kumar K.V
1938a150c2 ext4: Avoid leaking blocks after a block allocation failure
We should add inode to the orphan list in the same transaction
as block allocation.  This ensures that if we crash after a failed
block allocation and before we do a vmtruncate we don't leak block
(ie block marked as used in bitmap but not claimed by the inode).

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
CC:  Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2009-06-05 01:00:26 -04:00
Mike Rapoport
f6394e268f [ARM] pxa/cm-x300: update defconfig
Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-06-05 10:50:28 +08:00
Mike Rapoport
b5a5c474b0 [ARM] pxa/cm-x300: add .fixup method to enable second DRAM bank
Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-06-05 10:50:27 +08:00
Mike Rapoport
321d9eb32a [ARM] pxa/cm-x300: use STUART for uncompressor
Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-06-05 10:50:27 +08:00
Mike Rapoport
1858ced3f9 [ARM] pxa/cm-x300: add rtc-v3020 device registration
Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-06-05 10:50:26 +08:00
Mike Rapoport
b3992b6653 [ARM] pxa/cm-x300: use OBM configuration for NAND flash
CM-X300 can be assembled with different NAND flashes from different
manufacturers. Adding their configuration to the kernel is impractical,
therefore we will use the default NAND controller settings set up by the
bootloader.

Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-06-05 10:50:26 +08:00
Mike Rapoport
9599d1dbc2 [ARM] pxa/em-x270, cm-x270: use DEEPSLEEP for PM_SUSPEND_MEM
Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-06-05 10:50:25 +08:00
Mike Rapoport
128d88b82e [ARM] pxa/em-x270: add support for on-board USB Hub
Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-06-05 10:50:25 +08:00
Mike Rapoport
3690a0f426 [ARM] pxa/em-x270: change power supply name to "battery"
Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-06-05 10:50:24 +08:00
Mike Rapoport
2f15cb594e [ARM] pxa/em-x270: update libertas device setup
Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-06-05 10:50:24 +08:00
Mike Rapoport
76e3fc36eb [ARM] pxa/em-x270: add exeda GPIO extender and update GPIO mappings
Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-06-05 10:50:23 +08:00
Antonio Ospite
1ce2c51e6d [ARM] pxa/ezx: setup gpio-keys for EzX phones
Setup gpio-keys for EzX phones

Signed-off-by: Antonio Ospite <ospite@studenti.unina.it>
Acked-by: Daniel Ribeiro <drwyrm@gmail.com>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-06-05 10:50:22 +08:00
Dmitry Eremin-Solenikov
f0ba401769 [ARM] pxa/spitz: drop unused header files from spitz.c
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-06-05 10:49:45 +08:00
Jonathan Cameron
0a0ca89d59 [ARM] pxa/imote2: add i2c board info for the wm8940 audio codec
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-06-05 10:46:56 +08:00
Jonathan Cameron
a252084658 [ARM] pxa/imote2: add board config for SHT15 humidity sensor
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-06-05 10:46:43 +08:00
Jonathan Cameron
5aeb1a5e9f [ARM] pxa/stargate2: add support for Compact Flash/PCMCIA
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-06-05 10:46:32 +08:00
Jonathan Cameron
80153d1bcc [ARM] pxa/stargate2: Add board specific elements to the smc91x driver
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-06-05 10:46:25 +08:00
Jonathan Cameron
4036e1dea5 [ARM] pxa: Stargate 2 board support
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-06-05 10:46:17 +08:00
Marek Vasut
fc9c1b6fc8 [ARM] pxa/palm: Palm TX, T5, LD suspend-to-mem rework
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-06-05 10:43:29 +08:00
Marek Vasut
37330efd4a [ARM] pxa/palm: Add Palm27x aSoC driver to PalmTE2
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-06-05 10:41:54 +08:00
Marek Vasut
8768dc9b75 [ARM] pxa/palm: Switch PalmT5, TX, TE2 to GPIO VBUS
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-06-05 10:41:48 +08:00
Dmitry Eremin-Solenikov
96a9fcaf5d [ARM] pxa/csb726: register ac97 controller
Add a call to pxa_set_ac97_info() to enable the audio support.

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-06-05 10:41:23 +08:00
Dmitry Eremin-Solenikov
b860171500 [ARM] pxa/csb726: switch to use smsc911x driver
csb726 used obsolete and not working out-of-tree driver smc911x.
Switch it to use new smsc911x driver.

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-06-05 10:41:17 +08:00
Philipp Zabel
ef47d5f024 MAINTAINERS: add a maintainer for iPAQ hx4700
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-06-05 10:40:53 +08:00
Philipp Zabel
dd045445f8 [ARM] pxa: magician_defconfig enable hx4700, asic3 and w100fb
I'm not going to maintain separate defconfigs for magician and hx4700.
This should probably be renamed to htcpxa_defconfig.

Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-06-05 10:40:43 +08:00
Philipp Zabel
d3ca1952e6 [ARM] pxa: add basic support for HP iPAQ hx4700 PDAs
This includes
- IrDA (pxafixp_ir),
- Buttons (gpio-keys),
- ASIC3 IRQ/GPIOs (asic3),
- EGPIOs (htc-egpio),
- ATI Imageon w3220 framebuffer (w100fb),
- Backlight (pwm-backlight),
- StrataFlash (physmap),
- Battery monitor (ds1wm,w1_ds2760,ds2760_battery)
- USB gadget support (pxa27x_udc,gpio_vbus).
- bq24022 battery charger (pda_power,bq24022)
- TSC2046 touchscreen (ads7846)

Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-06-05 10:40:31 +08:00
Philipp Zabel
2f1a5bf707 [ARM] pxa/magician: use ARRAY_AND_SIZE for platform_add_devices
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-06-05 10:39:39 +08:00
Philipp Zabel
f8f9d5ecff [ARM] pxa/magician: use I2C fast mode
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-06-05 10:39:16 +08:00
Robert Jarzmik
3dbeef231e [ARM] pxa: add vcc_core regulation for cpufreq on pxa2xx
Add voltage regulation capability to pxa2xx cpufreq
driver. The cpufreq will ask for a "vcc_core" regulator to
the regulator framework.

If a regulator is found at probe time, it will be used with
values specified in PXA270 Electrical, Mechanical, and
Thermal Specifications.

If not, it will be assumed for now that frequency change
will work without voltage control. This assumes that the
IPL/SPL installs sane values to an existing voltage
regulator (ie. voltage high enough to support the full
range).

Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-06-05 10:33:07 +08:00
Jürgen Schindele
dd5b94aba7 [ARM] pxa: add additional mfp definitions for pxa320
Signed-off-by: Jürgen Schindele <linux@schindele.name>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-06-05 10:32:55 +08:00
Mike Rapoport
d082d36ea8 [ARM] pxa: add ability to set suspend mode
PXA processors have several low-power modes. Currently kernel supports
only one of these modes for PM_SUSPEND_MEM.

This patch adds ability to set desired suspend mode for PXA27x based
machines.

Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Reviewed-by: Russell King <linux@arm.linux.org.uk>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-06-05 10:32:48 +08:00
Robert Jarzmik
94c35a6b51 [ARM] pxa: add udc support for pxa3xx
As reported by Aric Blumer, the pxa27x_udc driver does work
with pxa3xx devices. Add support into device files.

Reported-by: Aric Blumer <aric@sdgsystems.com>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Matt Reimer <mattjreimer@gmail.com>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-06-05 10:32:34 +08:00
Philipp Zabel
a01bd58449 [ARM] pxa: allow IRQ_BOARD_END to be customized and make zylonite to use it
The default value is 16 IRQs. Zylonite needs 32, ASIC3 based boards need 70.

My problem is still that due to the way IRQ_GPIO is hardcoded, ASIC3 based boards
need 70 IRQs starting at IRQ_BOARD_START. If I define ASIC3 IRQs similar to LoCoMo
or SA1111, things break as soon as something selects PXA_HAVE_BOARD_IRQS.
Increasing the default number of board IRQs to 70 instead doesn't seem very nice.

Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-06-05 10:32:20 +08:00
Mike Rapoport
46580c0306 [ARM] pxa: update pxa2xx_spi_chip initialization to use .gpio_cs field
Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-06-05 10:32:06 +08:00
Eric Miao
a27ba768a1 [ARM] pxa: add PWM devices support for pxa168/910
Signed-off-by: Mingwei Wang <mingwei.wang@marvell.com>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-06-05 10:32:06 +08:00
Eric Miao
2a55b910e0 [ARM] pxa: add missing IRQ_PXA910_NONE to irqs.h
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-06-05 10:32:05 +08:00
Eric Miao
3852ac7113 [ARM] pxa: move pwm.c to common plat-pxa directory
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-06-05 10:32:04 +08:00
Eric Miao
a71ef16327 [ARM] pxa: build pwm.c according to HAVE_PWM instead of PXA_PWM
The PXA_PWM config option is really redundant since the introduction
of HAVE_PWM, replace that with HAVE_PWM to avoid confusion.

Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-06-05 10:32:04 +08:00
Eric Miao
a757ad8b39 [ARM] pxa: allow PWM ID base number to be specified in pwm_id_table
PWMs on PXA168/910 start at number 1 instead of 0, (i.e. PWM1/2/3/4 instead
of PWM0/1/2/3 on PXA25x/PXA27x/PXA3xx). Allow this number to be specified
in pwm_id_table.

Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-06-05 10:32:03 +08:00
Eric Miao
3d2a98cd5e [ARM] pxa: simplify secondary PWM handling and use platform_device_id table
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-06-05 10:32:02 +08:00
Eric Miao
1a77920e4c [ARM] pxa: add I2C (TWSI) devices to pxa168/pxa910
Signed-off-by: Paul Shen <paul.shen@marvell.com>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-06-05 10:32:02 +08:00
Eric Miao
f0a8370139 [ARM] pxa: move mach/i2c.h to plat/i2c.h
Signed-off-by: Paul Shen <paul.shen@marvell.com>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-06-05 10:32:01 +08:00