On the imx51_3ds board, eCSPI2 is connected to a SPI NOR flash,
now add iomux definitions for those used pins.
Signed-off-by: Jason Wang <jason77.wang@gmail.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The driver recently learned to handle platform ids. Make use of this
new feature. The up side is that the driver needs less knowledge about
the spi interfaces used on different SoCs.
Acked-by: Jason Wang <jason77.wang@gmail.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
i.MX51 comes with two eCSPI interfaces (that are quite different from
what was known before---the tried and tested Freescale way) and a CSPI
interface that is identical to the devices found on i.MX25 and i.MX35.
This patch is a merge of two very similar patches (by Jason Wang and Sascha
Hauer resp.) plus a (now hopefully correct) reimplementation of the
clock calculation.
Acked-by: Jason Wang <jason77.wang@gmail.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This prepares adding support for imx51's eCSPI. This IP has seperate
control and config bits for all four supported chip selects, so the
config routine needs to know which chip select is being used even if
the chipselect is realized by a gpio.
Acked-by: Jason Wang <jason77.wang@gmail.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Nearly everything that is needed is provided by the version of the SPI IP.
Now the only checks left using cpu_is_... are clk divider tuning on mx21/mx27
and autodetection (which will die soon).
Acked-by: Jason Wang <jason77.wang@gmail.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This has the advantage not to need to much cpu_is_... macros. Still more
when imx51 support is added which has two different spi interfaces which
would introduce additional checks on the device id.
With this setup it's not possible for the compiler anymore to detect the
unused functions, so four additional kconfig symbols are introduced to
ifdef out the unneeded functions in the callback array and all these
functions are marked with __maybe_unused to suppress the corresponding
gcc warnings.
Comparing the driver footprint with and without the patch for a mx27
kernel yields:
add/remove: 2/0 grow/shrink: 2/0 up/down: 280/0 (280)
function old new delta
spi_imx_devtype - 192 +192
spi_imx_probe 980 1032 +52
spi_imx_devtype_data - 32 +32
spi_imx_setupxfer 276 280 +4
Later when the platform code is updated to use the platform ids, the
autodetection can be removed which will make the driver a bit smaller
again. (~60 Bytes in my test.)
Acked-by: Jason Wang <jason77.wang@gmail.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
When renaming over a directory we need to use hfsplus_rmdir instead of
hfsplus_unlink to evict the victim. This makes sure we properly error out
on non-empty directory as required by Posix (BZ #16571), and it also makes
sure we do the right thing in case i_nlink will every be set correctly for
directories on hfsplus.
Reported-by: Vlado Plaga <rechner@vlado-do.de>
Signed-off-by: Christoph Hellwig <hch@tuxera.com>
After
| commit d8191fa4a3
| Author: Alex Chiang <achiang@hp.com>
| Date: Mon Feb 22 12:11:39 2010 -0700
|
| ACPI: processor: driver doesn't need to evaluate _PDC
|
| Now that the early _PDC evaluation path knows how to correctly
| evaluate _PDC on only physically present processors, there's no
| need for the processor driver to evaluate it later when it loads.
|
| To cover the hotplug case, push _PDC evaluation down into the
| hotplug paths.
only cpu with Processor Statement get processed with _PDC
If bios is using Device object instead of Processor statement.
SSDTs for Pstate/Cstate/Tstate can not be loaded dynamically.
Need to try to scan ACPI0007 in addition to Processor.
That commit is between 2.6.34-rc1 and 2.6.34-rc2, so stable tree for 2.6.34+
need this patch.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Reviewed-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Most of the extent handling code already does proper SMP locking, but
hfsplus_write_inode was calling into hfsplus_ext_write_extent without
taking the extents_lock. Fix this by splitting hfsplus_ext_write_extent
into an internal helper that expects the lock, and a public interface
that first acquires it.
Also add a few locking asserts and document the locking rules in
hfsplus_fs.h.
Signed-off-by: Christoph Hellwig <hch@tuxera.com>
We already have i_mutex for readdir and the namespace operations that add
entries to open_dir_list, the only thing that was missing was the removal
in hfsplus_dir_release.
Signed-off-by: Christoph Hellwig <hch@tuxera.com>
The flags in the HFS+-specific superlock do get modified during runtime,
use atomic bitops to make the modifications SMP safe.
Signed-off-by: Christoph Hellwig <hch@tuxera.com>
Lock updates to the mutal fields in the volume header, and document the
locing in the hfsplus_sb_info structure.
Signed-off-by: Christoph Hellwig <hch@tuxera.com>
We never walk the list - the only reason for it is to make the resource fork
inodes appear hashed to the writeback code. Borrow a trick from JFS to do
that without needing a list head.
Signed-off-by: Christoph Hellwig <hch@tuxera.com>
We never look at it, nor change the next_alloc field in the superblock. So
don't bother caching it or writing it out in hfsplus_sync_fs.
Signed-off-by: Christoph Hellwig <hch@tuxera.com>
Add a new hfsplus_system_write_inode for writing the special system inodes
and streamline the fastpath write_inode code.
Signed-off-by: Christoph Hellwig <hch@tuxera.com>
Add a new hfsplus_system_read_inode for reading the special system inodes
and streamline the fastpath iget code.
Signed-off-by: Christoph Hellwig <hch@tuxera.com>
HFSPLUS_I doesn't return a pointer to the hfsplus-specific inode
information like all other FOO_I macros, but dereference the pointer in a way
that made it look like a direct struct derefence. This only works as long
as the HFSPLUS_I macro is used directly and prevents us from keepig a local
hfsplus_inode_info pointer. Fix the calling convention and introduce a local
hip variable in all functions that use it constantly.
Signed-off-by: Christoph Hellwig <hch@tuxera.com>
HFSPLUS_SB doesn't return a pointer to the hfsplus-specific superblock
information like all other FOO_SB macros, but dereference the pointer in a way
that made it look like a direct struct derefence. This only works as long
as the HFSPLUS_SB macro is used directly and prevents us from keepig a local
hfsplus_sb_info pointer. Fix the calling convention and introduce a local
sbi variable in all functions that use it constantly.
Signed-off-by: Christoph Hellwig <hch@tuxera.com>
Except for ->put_super the BKL is now gone from HFS, which means it's
superflous there too as ->put_super is serialized by the VFS.
Signed-off-by: Christoph Hellwig <hch@tuxera.com>
Use alloc_mutex to protect hfsplus_sync_fs against itself and concurrent
allocations, which allows to get rid of lock_super in hfsplus.
Note that most fields in the superblock still aren't protected against
concurrent allocations, that will follow later.
Signed-off-by: Christoph Hellwig <hch@tuxera.com>
Use a new per-sb alloc_mutex instead of abusing i_mutex of the alloc_file
to protect block allocations. This gets rid of lockdep nesting warnings
and prepares for extending the scope of alloc_mutex.
Signed-off-by: Christoph Hellwig <hch@tuxera.com>
Use i_mutex for protecting against concurrent setflags ioctls like in
other filesystems and get rid of the BKL in hfsplus_ioctl.
Signed-off-by: Christoph Hellwig <hch@tuxera.com>
Currenly the HFSPLUS_IOC_EXT2_GETFLAGS case never unlocks the BKL, which
can lead to easily reproduced lockups when doing multiple GETFLAGS ioctls.
Fix this by only taking the BKL for the HFSPLUS_IOC_EXT2_SETFLAGS case
as neither HFSPLUS_IOC_EXT2_GETFLAGS not the default error case needs it.
Signed-off-by: Christoph Hellwig <hch@tuxera.com>
Avoid TLB flush IPIs for the cores in deeper c-states by voluntary leave_mm()
before entering into that state. CPUs tend to flush TLB in those c-states
anyways.
acpi_idle does this with C3-type states, but it was not caried over
when intel_idle was introduced. intel_idle can apply it
to C-states in addition to those that ACPI might export as C3...
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Roger Luethi noticed packets for unknown VLANs getting silently dropped
even in promiscuous mode.
Check for promiscuous mode in __vlan_hwaccel_rx() and vlan_gro_common()
before drops.
As suggested by Patrick, mark such packets to have skb->pkt_type set to
PACKET_OTHERHOST to make sure they are dropped by IP stack.
Reported-by: Roger Luethi <rl@hellgate.ch>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
CC: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
There were lots of places being inconsistent since handle count
looked like a kref but it really wasn't.
Fix this my just making handle count an atomic on the object,
and have it increase the normal object kref.
Now i915/radeon/nouveau drivers can drop the normal reference on
userspace object creation, and have the handle hold it.
This patch fixes a memory leak or corruption on unload, because
the driver had no way of knowing if a handle had been actually
added for this object, and the fbcon object needed to know this
to clean itself up properly.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Dave Airlie <airlied@redhat.com>
S3C2440 style I2C controller uses PCLK to calculate the SDA line delay.
The driver wrongly assumed that this delay is calculated from the
frequency that the controller is operating on. This patch fixes this
issue.
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
create_irq() returns -1 if the interrupt allocation failed, but the
code checks for irq == 0.
Use create_irq_nr() instead.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Venkatesh Pallipadi <venki@google.com>
LKML-Reference: <alpine.LFD.2.00.1009282310360.2416@localhost6.localdomain6>
Cc: stable@kernel.org
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
free_irq_cfg() is not freeing the cpumask_vars in irq_cfg. Fixing this
triggers a use after free caused by the fact that copying struct
irq_cfg is done with memcpy, which copies the pointer not the cpumask.
Fix both places.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Yinghai Lu <yhlu.kernel@gmail.com>
LKML-Reference: <alpine.LFD.2.00.1009282052570.2416@localhost6.localdomain6>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@kernel.org
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
If acpi_evaluate_object() function call doesn't fail, we must kfree()
output.buffer before returning from pcc_cpufreq_do_osc().
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Dave Jones <davej@redhat.com>
acpi_perf_data is a percpu pointer but was missing __percpu markup.
Add it.
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Dave Jones <davej@redhat.com>
This patch fixes a GFS2 problem whereby the first rename after a
mount can result in a file system consistency error being flagged
improperly and cause the file system to withdraw. The problem is
that the rename code tries to run the rgrp list with function
gfs2_blk2rgrpd before the rgrp list is guaranteed to be read in
from disk. The patch makes the rename function hold the rindex
glock (as the gfs2_unlink code does today) which reads in the rgrp
list if need be. There were a total of three places in the rename
code that improperly referenced the rgrp list without the rindex
glock and this patch fixes all three.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Commit c52c2ddc1d ("alpha: switch osf_sigprocmask() to use of
sigprocmask()") had several problems. The more obvious compile issues
got fixed in commit 0f44fbd297 ("alpha: fix compile problem in
arch/alpha/kernel/signal.c"), but it also caused a regression.
Since _BLOCKABLE is already the set of signals that can be blocked, the
code should do "newmask & _BLOCKABLE" rather than inverting _BLOCKABLE
before masking.
Reported-by: Michael Cree <mcree@orcon.net.nz>
Patch-by: Al Viro <viro@zeniv.linux.org.uk>
Patch-by: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The Enhanced Retransmission Mode(ERTM) is a realiable mode of operation
of the Bluetooth L2CAP layer. Think on it like a simplified version of
TCP.
The problem we were facing here was a deadlock. ERTM uses a backlog
queue to queue incomimg packets while the user is helding the lock. At
some moment the sk_sndbuf can be exceeded and we can't alloc new skbs
then the code sleep with the lock to wait for memory, that stalls the
ERTM connection once we can't read the acknowledgements packets in the
backlog queue to free memory and make the allocation of outcoming skb
successful.
This patch actually affect all users of bt_skb_send_alloc(), i.e., all
L2CAP modes and SCO.
We are safe against socket states changes or channels deletion while the
we are sleeping wait memory. Checking for the sk->sk_err and
sk->sk_shutdown make the code safe, since any action that can leave the
socket or the channel in a not usable state set one of the struct
members at least. Then we can check both of them when getting the lock
again and return with the proper error if something unexpected happens.
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Signed-off-by: Ulisses Furquim <ulisses@profusion.mobi>
This reverts commit 8cb8e6f168.
That commit introduced a regression with the Bluetooth Profile Tuning
Suite(PTS), Reverting this make sure that L2CAP is in a qualificable
state.
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
