The IPoIB UD QP reports send completions to priv->send_cq, which is
usually left unarmed; it only gets armed when the number of
outstanding send requests reaches the size of the TX queue. This
arming is done only in the send path for the UD QP. However, when
sending CM packets, the net queue may be stopped for the same reasons
but no measures are taken to recover the UD path from a lockup.
Consider this scenario: a host sends high rate of both CM and UD
packets, with a TX queue length of N. If at some time the number of
outstanding UD packets is more than N/2 and the overall outstanding
packets is N-1, and CM sends a packet (making the number of
outstanding sends equal N), the TX queue will be stopped. When all
the CM packets complete, the number of outstanding packets will still
be higher than N/2 so the TX queue will not be restarted.
Fix this by calling ib_req_notify_cq() when the queue is stopped in
the CM path.
Signed-off-by: Eli Cohen <eli@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
While waiting for the related USB patch, fix compile by enabling
it in the defconfigs. As discussed at:
http://thread.gmane.org/gmane.linux.usb.general/27432/focus=4460
Otherwise we'll get errors like:
drivers/usb/core/hcd.c:1892: error: 'pm_wq' undeclared (first use in this function)
drivers/usb/core/hcd.c:1892: error: (Each undeclared identifier is reported only once
drivers/usb/core/hcd.c:1892: error: for each function it appears in.)
Signed-off-by: Tony Lindgren <tony@atomide.com>
Fixing this symptom:
[acme@mica linux-2.6-tip]$ perf record -a -f
Fatal: Permission error - are you root?
Bus error
[acme@mica linux-2.6-tip]$
I.e. if for some reason no data is collected, in this case a non
root user trying to do systemwide profiling, no data will be
collected, and then we end up trying to mmap a zero sized file
and access the file header, b00m.
Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: <stable@kernel.org>
LKML-Reference: <1268333592-30872-1-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Recent DMA API changes broke compile for tusb6010. While
testing the fixes for tusb6010, I had to update the n8x0
defconfig quite a bit. Might as well merge it while at it
to make it more usable as we're using this to test the
multi-omap booting between V6 and V7 ARMs.
Also, anybody using n8x0 with a current kernel will most
likely want to mount root on the MMC instead of the onenand
to keep the Maemo install intact.
Enable I2C, REGULATOR, MMC, MFD, PM, and USB. Also change the root
to /dev/mmcblk0p2 instead of the onenand.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Based on Kalle's and Tony's patches. Some variables re-organized
and unused code removed.
Signed-off-by: Kalle Valo <kalle.valo@iki.fi>
Signed-off-by: Francisco Alecrim <francisco.alecrim@openbossa.org>
[tony@atomide.com: this is needed to fix the related tusb6010 DMA API changes]
Signed-off-by: Tony Lindgren <tony@atomide.com>
This patch moves omap_smc1 function to a seperate omap44xx-smc.S file
and sets compile flags as -Wa,-march=armv7-a.
This fix was suggested by Tony Lindgren <tony@atomide.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
[tony@atomide.com: otherwise multi-omap build with V6 and V7 breaks]
Signed-off-by: Tony Lindgren <tony@atomide.com>
the early_param() call in board-omap3touchbook.c expands to:
static const char __setup_str_early_touchbook_revision[]
__section(.init.rodata) _aligned(1) = tbr;
[...]
and we have a non-const variable being added to the
same section:
static struct ehci_hcd_omap_platform_data ehci_pdata
__section(.init.rodata);
because of that, gcc generates a section type conflict
which can (and actually should) be avoided by marking
const every variable marked with __initconst.
This patch fixes that for the ehci_hdc_omap_platform_data.
Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
gfs2_lock() will skip locks on file which have mode set to 02666. This is a problem in cases where the mode of the file is changed after a process has obtained a lock on the file. Such a lock will be skipped and will result in a BUG in locks_remove_flock().
gfs2_lock() should skip the check for mandatory locks when unlocking a file.
Signed-off-by: Sachin Prabhu <sprabhu@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Since pick_next_highest_task_rt() already iterates all the cgroups and
is really only interested in tasks, skip over the !task entries.
Reported-by: Dhaval Giani <dhaval.giani@gmail.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Tested-by: Dhaval Giani <dhaval.giani@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Export perf_trace_regs and perf_arch_fetch_caller_regs since module will
use these.
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
[ use EXPORT_PER_CPU_SYMBOL_GPL() ]
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <4B989C1B.2090407@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
What happens is that we schedule badly like:
<...>-1987 [019] 280.252808: x86_pmu_start: event-46/1300c0: idx: 0
<...>-1987 [019] 280.252811: x86_pmu_start: event-47/1300c0: idx: 1
<...>-1987 [019] 280.252812: x86_pmu_start: event-48/1300c0: idx: 2
<...>-1987 [019] 280.252813: x86_pmu_start: event-49/1300c0: idx: 3
<...>-1987 [019] 280.252814: x86_pmu_start: event-50/1300c0: idx: 32
<...>-1987 [019] 280.252825: x86_pmu_stop: event-46/1300c0: idx: 0
<...>-1987 [019] 280.252826: x86_pmu_stop: event-47/1300c0: idx: 1
<...>-1987 [019] 280.252827: x86_pmu_stop: event-48/1300c0: idx: 2
<...>-1987 [019] 280.252828: x86_pmu_stop: event-49/1300c0: idx: 3
<...>-1987 [019] 280.252829: x86_pmu_stop: event-50/1300c0: idx: 32
<...>-1987 [019] 280.252834: x86_pmu_start: event-47/1300c0: idx: 1
<...>-1987 [019] 280.252834: x86_pmu_start: event-48/1300c0: idx: 2
<...>-1987 [019] 280.252835: x86_pmu_start: event-49/1300c0: idx: 3
<...>-1987 [019] 280.252836: x86_pmu_start: event-50/1300c0: idx: 32
<...>-1987 [019] 280.252837: x86_pmu_start: event-51/1300c0: idx: 32 *FAIL*
This happens because we only iterate the n_running events in the first
pass, and reset their index to -1 if they don't match to force a
re-assignment.
Now, in our RR example, n_running == 0 because we fully unscheduled, so
event-50 will retain its idx==32, even though in scheduling it will have
gotten idx=0, and we don't trigger the re-assign path.
The easiest way to fix this is the below patch, which simply validates
the full assignment in the second pass.
Reported-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1268311069.5037.31.camel@laptop>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Fix:
arch/powerpc/kernel/perf_event.c:1334: error: 'power_pmu_notifier' undeclared (first use in this function)
arch/powerpc/kernel/perf_event.c:1334: error: (Each undeclared identifier is reported only once
arch/powerpc/kernel/perf_event.c:1334: error: for each function it appears in.)
arch/powerpc/kernel/perf_event.c:1334: error: implicit declaration of function 'power_pmu_notifier'
arch/powerpc/kernel/perf_event.c:1334: error: implicit declaration of function 'register_cpu_notifier'
Due to commit 3f6da390 (perf: Rework and fix the arch CPU-hotplug hooks).
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Reduce warning message output to one line only instead of per
cpu.
Signed-of-by: Mike Travis <travis@sgi.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: x86@kernel.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
There is possible to save r3/r4 at the beggining of user part
before calling handlers and at the end restore it.
Signed-off-by: Michal Simek <monstr@monstr.eu>
We have to use consistent code to be able to do coherent dma
function. In consistent code is used cache inhibit page mapping.
Xilinx reported that there is bug in Microblaze for WB and
d-cache_always use option. Microblaze 7.30.a should be first version
where is this bug removed.
Signed-off-by: Michal Simek <monstr@monstr.eu>
Remove ancient Kconfig option for consistent code.
MMU uses cache inhibit pages.
noMMU uses UNCACHE SHADOW feature where is used double ram size.
For example:
Physical ram is 256MB and cache are setup to cover the same size.
But if you setup in HW that size is 512MB and cache covers 256MB
than you can use adresses from 256-512MB without caches and
correspond with 0-256MB with cache. That's why I am using
dcache base/high addresses to find out uncache area.
Signed-off-by: Michal Simek <monstr@monstr.eu>
I found several problems for ll_temac driver and on system with WB.
This early fix should fix it. I will clean this patch before I will add
it to mainline
Signed-off-by: Michal Simek <monstr@monstr.eu>
Signed-off-by: Frans Pop <elendil@planet.nl>
Cc: microblaze-uclinux@itee.uq.edu.au
Cc: Michal Simek <monstr@monstr.eu>
Signed-off-by: Michal Simek <monstr@monstr.eu>
Remove arch-specific show_mem() in favor of the generic version.
It is based on powerpc patch.
bda2fa5355
Signed-off-by: Michal Simek <monstr@monstr.eu>
For copy was used r7 register when CONFIG_CMDLINE_BOOL option
is enabled. But r7 stores pointer to fdt that's why machine_early_init
not detect compiled-in DTB.
I also moved kernel PID setup to have TLB init in one block
Signed-off-by: Michal Simek <monstr@monstr.eu>
I found several problems for ll_temac driver and on system with WB.
This early fix should fix it. I will clean this patch before I will add
it to mainline
Signed-off-by: Michal Simek <monstr@monstr.eu>
Without this change, the install path is relative to
prefix/DESTDIR where prefix is automatically set to $HOME.
This can produce unexpected results. For example:
make -C tools/perf DESTDIR=/home/jkacur/tmp install-man
creates the directory: /home/jkacur/home/jkacur/tmp/share/...
instead of the expected: /home/jkacur/tmp/share/...
Signed-off-by: John Kacur <jkacur@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Kyle McMartin <kyle@redhat.com>
Cc: <stable@kernel.org>
LKML-Reference: <1268312220-12880-1-git-send-email-jkacur@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This patch add core PREEMPT support for Microblaze.
I tried to trace it via tracers and I was able to see any output.
I also added low level debug functions to see if that code is called.
Signed-off-by: Michal Simek <monstr@monstr.eu>
From : Ananth N Mavinakayanahalli <ananth@in.ibm.com>
When freeing the instruction slot, the arithmetic to calculate
the index of the slot in the page needs to account for the total
size of the instruction on the various architectures.
Calculate the index correctly when freeing the out-of-line
execution slot.
Reported-by: Sachin Sant <sachinp@in.ibm.com>
Reported-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
LKML-Reference: <4B9667AB.9050507@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This patch is based on powerpc patch
64f1650247
We did some cleanups and removed powerpc parts.
There is one new debug early listing function too.
Exclude function is only in Debug options.
We tested in on custom board.
Signed-off-by: Michal Simek <monstr@monstr.eu>
There are two parts of changes. The first is just enable
PCI in Makefiles and in Kconfig. The second is the rest of
missing files. I didn't want to add it with previous patch
because that patch is too big.
Current Microblaze toolchain has problem with weak symbols
that's why is necessary to apply this changes to be possible
to compile pci support.
Xilinx knows about this problem.
Signed-off-by: Michal Simek <monstr@monstr.eu>
Add pci-common.h and pci32.c. Files are based on PPC version.
There are removed ppc specific parts and the code was completely
clean.
Signed-off-by: Michal Simek <monstr@monstr.eu>
Add pci-bridge.h for Microblaze. It is based on powerpc header file.
My changes:
I removed PPC_ prefix from constants
Removed ppc64 specifis parts
Signed-off-by: Michal Simek <monstr@monstr.eu>
I need to use generic/iomap.h for PCI that's why is necessary
to include it and fix ioport_{map,unmap} functions.
Signed-off-by: Michal Simek <monstr@monstr.eu>
We haven't used the "orig_rq" variable since
055a00865d "Fix/add missing update_rq_clock() calls"
Signed-off-by: Dan Carpenter <error27@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Andreas Herrmann <andreas.herrmann3@amd.com>
Cc: Gautham R Shenoy <ego@in.ibm.com>
Cc: efault@gmx.de
LKML-Reference: <20100306111752.GL4958@bicker>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Support function for PCI. We don't use any advance mapping mechanism
that's why implementation is simple.
Signed-off-by: Michal Simek <monstr@monstr.eu>
Add DMA support for Microblaze. There are some part of this new feature:
1. Basic DMA support
2. Enable DMA debug option
3. Setup notifier
Ad 1. dma-mapping come from powerpc and x86 version and it is based on
generic dma-mapping-common.h
Ad 2. DMA support debug features which is used in generic file.
For more information please look at Documentation/DMA-API.txt
Ad 3. notifier is very important to setup dma_ops. Without this part
for example ll_temac driver failed because there are no setup dma operations.
Signed-off-by: Michal Simek <monstr@monstr.eu>
Replace the calls to read_barrier_depends() in
ftrace_list_func() with rcu_dereference_raw() to improve
readability. The reason that we use rcu_dereference_raw() here
is that removed entries are never freed, instead they are simply
leaked. This is one of a very few cases where use of
rcu_dereference_raw() is the long-term right answer. And I
don't yet know of any others. ;-)
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: laijs@cn.fujitsu.com
Cc: dipankar@in.ibm.com
Cc: mathieu.desnoyers@polymtl.ca
Cc: josh@joshtriplett.org
Cc: dvhltc@us.ibm.com
Cc: niv@us.ibm.com
Cc: peterz@infradead.org
Cc: Valdis.Kletnieks@vt.edu
Cc: dhowells@redhat.com
LKML-Reference: <1267830207-9474-1-git-send-email-paulmck@linux.vnet.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
At present, the perf subcommands that do system-wide monitoring
(perf stat, perf record and perf top) don't work properly unless
the online cpus are numbered 0, 1, ..., N-1. These tools ask
for the number of online cpus with sysconf(_SC_NPROCESSORS_ONLN)
and then try to create events for cpus 0, 1, ..., N-1.
This creates problems for systems where the online cpus are
numbered sparsely. For example, a POWER6 system in
single-threaded mode (i.e. only running 1 hardware thread per
core) will have only even-numbered cpus online.
This fixes the problem by reading the /sys/devices/system/cpu/online
file to find out which cpus are online. The code that does that is in
tools/perf/util/cpumap.[ch], and consists of a read_cpu_map()
function that sets up a cpumap[] array and returns the number of
online cpus. If /sys/devices/system/cpu/online can't be read or
can't be parsed successfully, it falls back to using sysconf to
ask how many cpus are online and sets up an identity map in cpumap[].
The perf record, perf stat and perf top code then calls
read_cpu_map() in the system-wide monitoring case (instead of
sysconf) and uses cpumap[] to get the cpu numbers to pass to
perf_event_open.
Signed-off-by: Paul Mackerras <paulus@samba.org>
Cc: Anton Blanchard <anton@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
LKML-Reference: <20100310093609.GA3959@brick.ozlabs.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
