While powering on/off a local powerdomain in exynos5 chipsets, the
input clocks to each device gets modified. This behaviour is based
on the SYSCLK_SYS_PWR_REG registers.
E.g. SYSCLK_MFC_SYS_PWR_REG = 0x0, the parent of input clock to MFC
(aclk333) gets modified to oscclk
= 0x1, no change in clocks.
The recommended value of SYSCLK_SYS_PWR_REG before power gating any
domain is 0x0. So we must also restore the clocks while powering on
a domain everytime.
This patch adds the framework for getting the required mux and parent
clocks through a power domain device node. With this patch, while
powering off a domain, parent is set to oscclk and while powering back
on, its re-set to the correct parent which is as per the recommended
pd on/off sequence.
Signed-off-by: Prathyush K <prathyush.k@samsung.com>
Signed-off-by: Andrew Bresticker <abrestic@chromium.org>
Signed-off-by: Arun Kumar K <arun.kk@samsung.com>
Signed-off-by: Shaik Ameer Basha <shaik.ameer@samsung.com>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
First try to find the named clock variants then fall back to the already
existing handling of a nameless declared baudclk.
This also adds the missing documentation for this already existing variant.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch adds the device tree binding documentation for the ST
SDHCI driver. It documents the differences between the core properties
described by mmc.txt and the properties used by the sdhci-st driver.
Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Maxime Coquelin <maxime.coquelin@st.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The primary purpose of this patch is to add information about (now
required) aliases of UART ports. However the documentation currently is
heavily outdated and so this patch also takes care of this.
Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When Tegra was converted to use the standard reset bindings, the PHY was
forgotten, probably because all the resetting of the USB blocks were
done in the EHCI driver. What also went unnoticed is that resetting the
1st on-chip USB module also wipes some of the UTMI pad configuration
registers that are also used by the other USB blocks. So this fact needs
to be described in the device tree, and the driver modified not to reset
the 1st module at inappropriate times.
In order to stay compatible with old device trees, the USB drivers will
still function without these properties but with the old,
potentially buggy behaviour.
Signed-off-by: Tuomas Tynkkynen <ttynkkynen@nvidia.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Documentation for atmel-pmc only list one compatible, add the remaining
compatible strings.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Add details of following properties which are used on driver but
not documented on DT binding document.
- ams,enable-internal-int-pullup
- ams,enable-internal-i2c-pullup
Reported-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
This patch add documentation for S2MPU02 PMIC device. S2MPU02 has a little
difference from S2MPS11/S2MPS14 PMIC and has LDO[1-28]/Buck[1-7].
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
It's LDO2, not LD02.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Sachin Kamat <sachin.kamat@samsung.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
It's <1>, not 1.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Sachin Kamat <sachin.kamat@samsung.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
The driver already supports the r8a7791 SoC, and "renesas,sdhi-r8a7791"
is already in use.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Ian Molton <ian.molton@codethink.co.uk>
Cc: Chris Ball <chris@printf.net>
Cc: linux-mmc@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Currently the documentation doesn't match the code in mmc_of_parse. This
patch rectifies this.
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The am335x can't detect pending cirq in PM runtime suspend.
This patch reconfigures dat1 as a GPIO before going to suspend.
SDIO interrupts are detected with the GPIO, the GPIO will only wake
the module from suspend, SDIO irq detection will still happen through the
IP block.
Idea of remuxing the pins by Tony Lindgren. Code contributions from
Tony Lindgren and Balaji T K <balajitk@ti.com>
Signed-off-by: Andreas Fenkart <afenkart@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Acked-by: Balaji T K <balajitk@ti.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
There have been various patches floating around for enabling
the SDIO IRQ for hsmmc, but none of them ever got merged.
Probably the reason for not merging the SDIO interrupt patches
has been the lack of wake-up path for SDIO on some omaps that
has also needed remuxing the SDIO DAT1 line to a GPIO making
the patches complex.
This patch adds the minimal SDIO IRQ support to hsmmc for
omaps that do have the wake-up path. For those omaps, the
DAT1 line need to have the wake-up enable bit set, and the
wake-up interrupt is the same as for the MMC controller.
This patch has been tested on am3730 es1.2 with mwifiex
connected to MMC3 with mwifiex waking to Ethernet traffic
from off-idle mode. Note that for omaps that do not have
the SDIO wake-up path, this patch will not work for idle
modes and further patches for remuxing DAT1 to GPIO are
needed.
Based on earlier patches [1][2] by David Vrabel
<david.vrabel@csr.com>, Steve Sakoman <steve@sakoman.com>
For now, only support SDIO interrupt if we are booted with
a separate wake-irq configued via device tree. This is
because omaps need the wake-irq for idle states, and some
omaps need special quirks. And we don't want to add new
legacy mux platform init code callbacks any longer as we
are moving to DT based booting anyways.
To use it, you need to specify the wake-irq using the
interrupts-extended property.
[1] http://www.sakoman.com/cgi-bin/gitweb.cgi?p=linux.git;a=commitdiff_plain;h=010810d22f6f49ac03da4ba384969432e0320453
[2] http://comments.gmane.org/gmane.linux.kernel.mmc/20446
Acked-by: Balaji T K <balajitk@ti.com>
Signed-off-by: Andreas Fenkart <afenkart@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Add devicetree bindings for i2s controller found on
rk3066, rk3188 and rk3288 processors from rockchip.
Signed-off-by: Jianqun Xu <xjq@rock-chips.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
- L2CC latency properties for BG2Q
- DW i2c nodes for BG2Q and corresponding dev board
- SMP related nodes for BG2 and BG2Q
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJTsWf4AAoJEN2kpao7fSL49BkQAIFRcw5YH8Ss72do+sDxNQMU
in1GZ5mHBrLzu0qjAbEe3jrKmXUQDWhRqkIVtM4A6HTb9RwM+85eNVfziyld0K8F
O6tErJlVhvK6hG63Cl/M/QIZZEMoAsOeM/NRrOoij0yftFdgdHz1mUp+RFxtdiuS
mL8iarnn2mL9IpiBZYz1I+0Y7HxgX5+dVdG9uHRzhzLJffxkl0kki21dtaKEUInv
n2RlF93L9PtVgRGUer9UEXDRG7VNd594fT56q5kOU8vyYsLXltDcvzI56+jIXO+s
JsjTTUsboXOHK9BCzjONcRYiLZQ8g4M5GkeNOb6oDpy3sQSS7ORf4WpKYhyRnvVI
0MMY/RzVO06WOXdTW0yd25pH6j/EmkpqGa+8RqGwXk1twJqyPL5cfPzwbqtQ4Re3
RNXtbwp6qxECJ4oRf8rc8xUlWKH49xf0hiVkX1aKQKp+8qsyOvhCug4sAnFehOZM
DShXdxmGM9bSi9wYswLs+a1dPEJPlpE2ALUfZAYUuxwsziAPTztioKVS8Ht7TjBA
aqINoFNOlpi0m84SbXGIP0E3inhpe6KdrD98tPFPlxWhi3uom4i8qsjbRcHDIjYp
Hg9oa3U+Go2C4UPFnhqMxCbQFK1tgNOCGHrTRsLsO3uJ9g+IbFkqQPH088PO8eOm
aLcy2Hxd9AnhIU2GZTB6
=PEAV
-----END PGP SIGNATURE-----
Merge tag 'berlin-dt-3.17-1' of git://git.infradead.org/users/hesselba/linux-berlin into next/dt
Merge "Berlin DT changes for v3.17" from Sebastian Hesselbarth:
- L2CC latency properties for BG2Q
- DW i2c nodes for BG2Q and corresponding dev board
- SMP related nodes for BG2 and BG2Q
* tag 'berlin-dt-3.17-1' of git://git.infradead.org/users/hesselba/linux-berlin:
ARM: dts: berlin: add SMP related nodes and properties for BG2Q
ARM: dts: berlin: add SMP related nodes and properties for BG2
Documentation: bindings: add the marvell,berlin-smp CPU enable method
Documentation: bindings: add the Berlin CPU control doc
ARM: dts: berlin: enable i2c0 and i2c2
ARM: dts: berlin: add I2C nodes for BG2Q
ARM: dts: berlin2q: set L2CC tag and data latency to 2 cycles
Signed-off-by: Olof Johansson <olof@lixom.net>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJTqdFdAAoJEMhvYp4jgsXiH0IH/iswt8+Vnk5XV+d5U18sxhcp
TG9UW3mOnaaNIq3oeyQIXanKbWoSSmiE6FeFO6JqUjHZlutAaah+3EhUfYihZyAC
+LsFHA1rzhBzKJlwso5/m52Gj+Feuk6FtUsthRqOYaM/uFz43/uAwX9I53TLUHzK
Ef3uEUMiddmwZwZ+ODQMLnVKp6gKEgBjB4YLVo8HZ//Tm3P6nuHdp3V/u/TTmU8r
SqGQ1Uyl/6nhRtfJS+6BcWU/V95lN1FoGORh758ZRh41xKfRM7T2q3/aN1Tqa3Bu
NqQJ1oDwBj18yHZAKDR2VMx0zIV0PE/gyWZufBi8F+5fTt7x+lFf0dlUyJelPbo=
=JWtP
-----END PGP SIGNATURE-----
Merge tag 'versatile-for-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux into next/soc
Merge "DT IRQ and clock support for Versatile platforms" from Rob Herring.
This branch moves IRQ and clock support over to DT for the versatile
platforms.
* tag 'versatile-for-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
clk: versatile: add versatile OSC support
dts: versatile: add clock tree
ARM: timer-sp: allow getting timer1 clock from DT to fallback to legacy clock
dt/bindings: add compatible string for versatile osc clock
dt/bindings: arm-boards: add binding for Versatile core module
dts: versatile: add pl180 compatible strings
ARM: versatile: remove init_irq hook for DT boot
ARM: integrator: convert to use irqchip_init
irqchip: versatile-fpga: add support for arm,versatile-sic
irqchip: versatile-fpga: Add IRQCHIP_DECLARE support
dts: versatile: add missing irq controller properties
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Olof Johansson <olof@lixom.net>
Support for Wake-on-LAN using Magic Packet with or without SecureOn
password is implemented doing the following:
- setting the password to the relevant UniMAC registers
- flagging the device as a wakeup source for the system, as well as
its Wake-on-LAN interrupt
- prepare the hardware for entering WoL mode
- enabling the MPD interrupt to wake us
The Device Tree binding documentation is also reflected to specify the
third optional Wake-on-LAN interrupt line.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch removes s5p64x0 related spi because of no more support for
s5p64x0 SoCs. Meanwhile, cleanup SPI DT bindings for s5p6440-spi, it
should be s5p64x0-spi instead.
Cc: Mark Brown <broonie@linaro.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
This adds some basic, simple device tree bindings to the STMicro
MEMS sensor drivers.
Cc: devicetree@vger.kernel.org
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Denis CIOCCA <denis.ciocca@st.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
The A23 has an almost identical PRCM clock tree. The difference in
the APB0 clock is the smallest divisor is 1, instead of 2.
This patch adds a separate sun8i-a23-apb0-clk driver to support it.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Snow sound-card driver supports multiple boards with different
audio codecs. Updating the sound card name per board basis would provide
some more information to the end-user.
Signed-off-by: Tushar Behera <tushar.b@samsung.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
This patch adds documentation for Device-Tree bindings for sunxi IR
controller.
Signed-off-by: Alexander Bersenev <bay@hackerdom.ru>
Signed-off-by: Alexsey Shestacov <wingrime@linux-sunxi.org>
[hdegoede@redhat.com: Changed compatible to sun4i-a10-ir]
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Document DT bindings and parse them in the MTU2 driver.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Wolfram Sang <wsa@sang-engineering.com>
Document DT bindings and parse them in the TMU driver.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Simon Horman <horms+renesas@verge.net.au>
Document DT bindings and parse them in the CMT driver.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Simon Horman <horms+renesas@verge.net.au>
The clock control unit on the A23 is similar to the one found on the A31.
The AHB1, APB1, APB2 gates on the A23 are almost identical to the ones
on the A31, but some outputs are missing.
The main CPU PLL (PLL1) however is like that on older Allwinner SoCs,
such as the A10 or A20, but the N factor starts from 1 instead of 0.
This patch adds support for PLL1 and all the basic clock muxes and gates.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
mention support for 16 LED PCA9635 chip
the default of MODE2's OUTDRV was incorrectly stated
Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
Signed-off-by: Bryan Wu <cooloney@gmail.com>
The TAS5086 has two power domains, DVDD and AVDD. Enable them both as
long as the codec is in use.
Also, switch on the power to identify the chip at device probe level,
and switch it off again afterwards. The codec level will take care for
power handling later.
Signed-off-by: Daniel Mack <zonque@gmail.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
The ARM SMMU driver has supported chained SMMUs (i.e. SMMUs connected
back-to-back in series) via the smmu-parent property in device tree.
This was in anticipation of somebody building such a configuration,
however that seems not to be the case.
This patch removes the unused chained SMMU hack from the driver. We can
consider adding it back later if somebody decided they need it, but for
the time being it's just pointless mess that we're carrying in mainline.
Removal of the feature also makes migration to the generic IOMMU bindings
easier.
Signed-off-by: Will Deacon <will.deacon@arm.com>
Here is Qualcomm crypto driver device tree binding documentation
to used as a reference example.
Signed-off-by: Stanimir Varbanov <svarbanov@mm-sol.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The I2C address (reg) is required for the TDA998x driver to be loaded
and initialized.
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Palmas class of devices can provide 32K clock(s) to be used by other devices
on the board. Depending on the actual device the provided clocks can be:
CLK32K_KG and CLK32K_KGAUDIO
or only one:
CLK32K_KG (TPS659039 for example)
Use separate compatible flags for the two 32K clock.
A system which needs or have only one of the 32k clock from
Palmas will need to add node(s) for each clock as separate section
in the dts file.
The two compatible property is:
"ti,palmas-clk32kg" for clk32kg clock
"ti,palmas-clk32kgaudio" for clk32kgaudio clock
Apart from the register control of the clocks - which is done via
the clock API there is a posibility to enable the external sleep
control. In this way the clock can be enabled/disabled on demand by the
user of the clock.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Reviewed-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
Add documentation of the fsl,no-spread-spectrum option.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Reviewed-by: Shawn Guo <shawn.guo@freescale.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Add the documentation for the electrical properties for the iMX SATA
controller. There are many values for these, and listing them would
be error prone. Refer readers to the device documentation and driver
source code for these details.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Reviewed-by: Shawn Guo <shawn.guo@freescale.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
To: Tejun Heo <tj@kernel.org>,linux-ide@vger.kernel.org
The Freescale i.MX SATA controller mostly conforms to the AHCI
interface, but there are some special extensions at integration level
like clocks settings and hardware parameters.
Let's create a separate bindings doc for imx sata controller, so that
more imx specific properties can be added later without messing up the
generic ahci-platform bindings.
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Tejun Heo <tj@kernel.org>
Add support for TI's AM437x StarterKit Evaluation
Module.
Cc: Josh Elliot <jelliott@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Tested-by: Franklin Cooper Jr. <fcooper@ti.com>
Tested-by: Tom Rini <trini@ti.com>
Tested-by: Darren Etheridge <detheridge@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
