As we get compile warnings about .init.data being
used by non-init functions.
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Highlights include:
- Fix NFSv4 recovery so that it doesn't recover lost locks in cases such as
lease loss due to a network partition, where doing so may result in data
corruption. Add a kernel parameter to control choice of legacy behaviour
or not.
- Performance improvements when 2 processes are writing to the same file.
- Flush data to disk when an RPCSEC_GSS session timeout is imminent.
- Implement NFSv4.1 SP4_MACH_CRED state protection to prevent other
NFS clients from being able to manipulate our lease and file lockingr
state.
- Allow sharing of RPCSEC_GSS caches between different rpc clients
- Fix the broken NFSv4 security auto-negotiation between client and server
- Fix rmdir() to wait for outstanding sillyrename unlinks to complete
- Add a tracepoint framework for debugging NFSv4 state recovery issues.
- Add tracing to the generic NFS layer.
- Add tracing for the SUNRPC socket connection state.
- Clean up the rpc_pipefs mount/umount event management.
- Merge more patches from Chuck in preparation for NFSv4 migration support.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.14 (GNU/Linux)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=ZuW+
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-3.12-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client updates from Trond Myklebust:
"Highlights include:
- Fix NFSv4 recovery so that it doesn't recover lost locks in cases
such as lease loss due to a network partition, where doing so may
result in data corruption. Add a kernel parameter to control
choice of legacy behaviour or not.
- Performance improvements when 2 processes are writing to the same
file.
- Flush data to disk when an RPCSEC_GSS session timeout is imminent.
- Implement NFSv4.1 SP4_MACH_CRED state protection to prevent other
NFS clients from being able to manipulate our lease and file
locking state.
- Allow sharing of RPCSEC_GSS caches between different rpc clients.
- Fix the broken NFSv4 security auto-negotiation between client and
server.
- Fix rmdir() to wait for outstanding sillyrename unlinks to complete
- Add a tracepoint framework for debugging NFSv4 state recovery
issues.
- Add tracing to the generic NFS layer.
- Add tracing for the SUNRPC socket connection state.
- Clean up the rpc_pipefs mount/umount event management.
- Merge more patches from Chuck in preparation for NFSv4 migration
support"
* tag 'nfs-for-3.12-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (107 commits)
NFSv4: use mach cred for SECINFO_NO_NAME w/ integrity
NFS: nfs_compare_super shouldn't check the auth flavour unless 'sec=' was set
NFSv4: Allow security autonegotiation for submounts
NFSv4: Disallow security negotiation for lookups when 'sec=' is specified
NFSv4: Fix security auto-negotiation
NFS: Clean up nfs_parse_security_flavors()
NFS: Clean up the auth flavour array mess
NFSv4.1 Use MDS auth flavor for data server connection
NFS: Don't check lock owner compatability unless file is locked (part 2)
NFS: Don't check lock owner compatibility in writes unless file is locked
nfs4: Map NFS4ERR_WRONG_CRED to EPERM
nfs4.1: Add SP4_MACH_CRED write and commit support
nfs4.1: Add SP4_MACH_CRED stateid support
nfs4.1: Add SP4_MACH_CRED secinfo support
nfs4.1: Add SP4_MACH_CRED cleanup support
nfs4.1: Add state protection handler
nfs4.1: Minimal SP4_MACH_CRED implementation
SUNRPC: Replace pointer values with task->tk_pid and rpc_clnt->cl_clid
SUNRPC: Add an identifier for struct rpc_clnt
SUNRPC: Ensure rpc_task->tk_pid is available for tracepoints
...
Pull fuse bugfixes from Miklos Szeredi:
"Just a bunch of bugfixes"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
fuse: use list_for_each_entry() for list traversing
fuse: readdir: check for slash in names
fuse: hotfix truncate_pagecache() issue
fuse: invalidate inode attributes on xattr modification
fuse: postpone end_page_writeback() in fuse_writepage_locked()
window. Also, most of them are bug fixes this time. Two of my
three patches (moving gfs2_sync_meta and merging the two writepage
implementations) are clean ups with the third (taking the glock ref
in examine_bucket) being a fix for a difficult to hit race condition.
The removal of an unused memory barrier is a clean up from Bob Peterson,
and the "spectator" relates to a rarely used mount option. Ben
Marzinski's patch fixes a corner case where the incorrect inode
flags were being set, resulting in incorrect behaviour on fsync.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=rsQv
-----END PGP SIGNATURE-----
Merge tag 'gfs2-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-nmw
Pull GFS2 updates from Steven Whitehouse:
"This is possibly the smallest ever set of GFS2 patches for a merge
window. Also, most of them are bug fixes this time.
Two of my three patches (moving gfs2_sync_meta and merging the two
writepage implementations) are clean ups with the third (taking the
glock ref in examine_bucket) being a fix for a difficult to hit race
condition.
The removal of an unused memory barrier is a clean up from Bob
Peterson, and the "spectator" relates to a rarely used mount option.
Ben Marzinski's patch fixes a corner case where the incorrect inode
flags were being set, resulting in incorrect behaviour on fsync"
* tag 'gfs2-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-nmw:
GFS2: dirty inode correctly in gfs2_write_end
GFS2: Don't flag consistency error if first mounter is a spectator
GFS2: Remove unnecessary memory barrier
GFS2: Merge ordered and writeback writepage
GFS2: Take glock reference in examine_bucket()
GFS2: Move gfs2_sync_meta to lops.c
Pull ceph updates from Sage Weil:
"This includes both the first pile of Ceph patches (which I sent to
torvalds@vger, sigh) and a few new patches that add support for
fscache for Ceph. That includes a few fscache core fixes that David
Howells asked go through the Ceph tree. (Thanks go to Milosz Tanski
for putting this feature together)
This first batch of patches (included here) had (has) several
important RBD bug fixes, hole punch support, several different
cleanups in the page cache interactions, improvements in the truncate
code (new truncate mutex to avoid shenanigans with i_mutex), and a
series of fixes in the synchronous striping read/write code.
On top of that is a random collection of small fixes all across the
tree (error code checks and error path cleanup, obsolete wq flags,
etc)"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: (43 commits)
ceph: use d_invalidate() to invalidate aliases
ceph: remove ceph_lookup_inode()
ceph: trivial buildbot warnings fix
ceph: Do not do invalidate if the filesystem is mounted nofsc
ceph: page still marked private_2
ceph: ceph_readpage_to_fscache didn't check if marked
ceph: clean PgPrivate2 on returning from readpages
ceph: use fscache as a local presisent cache
fscache: Netfs function for cleanup post readpages
FS-Cache: Fix heading in documentation
CacheFiles: Implement interface to check cache consistency
FS-Cache: Add interface to check consistency of a cached object
rbd: fix null dereference in dout
rbd: fix buffer size for writes to images with snapshots
libceph: use pg_num_mask instead of pgp_num_mask for pg.seed calc
rbd: fix I/O error propagation for reads
ceph: use vfs __set_page_dirty_nobuffers interface instead of doing it inside filesystem
ceph: allow sync_read/write return partial successed size of read/write.
ceph: fix bugs about handling short-read for sync read mode.
ceph: remove useless variable revoked_rdcache
...
- Device tree updates for TZ1090 GPIO drivers merged via GPIO tree.
- Add driver for ImgTec PDC irqchip as found in TZ1090 SoC.
- Add linux-metag mailing list to MAINTAINERS file.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.13 (GNU/Linux)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=WHe5
-----END PGP SIGNATURE-----
Merge tag 'metag-for-v3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/metag
Pull metag architecture changes from James Hogan:
- Device tree updates for TZ1090 GPIO drivers merged via GPIO tree.
- Add driver for ImgTec PDC irqchip as found in TZ1090 SoC.
- Add linux-metag mailing list to MAINTAINERS file.
* tag 'metag-for-v3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/metag:
irq-imgpdc: add ImgTec PDC irqchip driver
MAINTAINERS: add linux-metag mailing list
metag: tz1090: instantiate gpio-tz1090-pdc
metag: tz1090: select and instantiate gpio-tz1090
metag: tz1090: select and instantiate irq-imgpdc
This reverts commit 70dd4998cb.
Now that the bugs have been resolved we can re-enable the
PV ticketlock implementation under PVHVM Xen guests.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: David Vrabel <david.vrabel@citrix.com>
There is no need to setup this kicker IPI if we are never going
to use the paravirtualized ticketlock mechanism.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: David Vrabel <david.vrabel@citrix.com>
Before this patch we would patch all of the pv_lock_ops sites
using alternative assembler. Then later in the bootup cycle
change the unlock_kick and lock_spinning to the Xen specific -
without re patching.
That meant that for the core of the kernel we would be running
with the baremetal version of unlock_kick and lock_spinning while
for modules we would have the proper Xen specific slowpaths.
As most of the module uses some API from the core kernel that ended
up with slowpath lockers waiting forever to be kicked (b/c they
would be using the Xen specific slowpath logic). And the
kick never came b/c the unlock path that was taken was the
baremetal one.
On PV we do not have the problem as we initialise before the
alternative code kicks in.
The fix is to make the updating of the pv_lock_ops function
be done before the alternative code starts patching.
Note that this patch fixes issues discovered by commit
f10cd522c5.
("xen: disable PV spinlocks on HVM") wherein it mentioned
PV spinlocks cannot possibly work with the current code because they are
enabled after pvops patching has already been done, and because PV
spinlocks use a different data structure than native spinlocks so we
cannot switch between them dynamically.
The first problem is solved by this patch.
The second problem has been solved by commit
816434ec4a
(Merge branch 'x86-spinlocks-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip)
P.S.
There is still the commit 70dd4998cb
(xen/spinlock: Disable IRQ spinlock (PV) allocation on PVHVM) to
revert but that can be done later after all other bugs have been
fixed.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: David Vrabel <david.vrabel@citrix.com>
As we are using the generic ticketlock structs and these
old structures are not needed anymore.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: David Vrabel <david.vrabel@citrix.com>
The xen_lock_spinning has a check for the kicker interrupts
and if it is not initialized it will spin normally (not enter
the slowpath).
But for PVHVM case we would initialize the kicker interrupt
before the CPU came online. This meant that if the booting
CPU used a spinlock and went in the slowpath - it would
enter the slowpath and block forever. The forever part because
during bootup: the spinlock would be taken _before_ the CPU
sets itself to be online (more on this further), and we enter
to poll on the event channel forever.
The bootup CPU (see commit fc78d343fa
"xen/smp: initialize IPI vectors before marking CPU online"
for details) and the CPU that started the bootup consult
the cpu_online_mask to determine whether the booting CPU should
get an IPI. The booting CPU has to set itself in this mask via:
set_cpu_online(smp_processor_id(), true);
However, if the spinlock is taken before this (and it is) and
it polls on an event channel - it will never be woken up as
the kernel will never send an IPI to an offline CPU.
Note that the PVHVM logic in sending IPIs is using the HVM
path which has numerous checks using the cpu_online_mask
and cpu_active_mask. See above mention git commit for details.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: David Vrabel <david.vrabel@citrix.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)
iQEcBAABAgAGBQJSGqS5AAoJEHm+PkMAQRiGFxEH/3VrqF6WAkcviNiW/0DCdO8k
v6Wi7Sp5LxVkwzmOCHCV1tTHwLRlH3cB9YmJlGQ0kHCREaAuEQAB0xJXIW7dnyYj
Qq7KoRZEMe3wizmjEsj8qsrhfMLzHjBw67hBz2znwW/4P7YdgzwD7KRiEat+yRC9
ON3nNL2zIqpfk92RXvVrSVl4KMEM+WNbOfiffgBiEP24Ja1MJMFH1d4i6hNOaB0x
9Pb3Lw8let92x+8Ao5jnjKdKMgVsoZWbN/TgQR8zZOHM38AGGiDgk18vMz+L+hpS
jqfjckxj1m30jGq0qZ9ZbMZx3IGif4KccVr30MqNHJpwi6Q24qXvT3YfA3HkstM=
=nAab
-----END PGP SIGNATURE-----
Merge tag 'v3.11-rc7' into stable/for-linus-3.12
Linux 3.11-rc7
As we need the git commit 28817e9de4f039a1a8c1fe1df2fa2df524626b9e
Author: Chuck Anderson <chuck.anderson@oracle.com>
Date: Tue Aug 6 15:12:19 2013 -0700
xen/smp: initialize IPI vectors before marking CPU online
* tag 'v3.11-rc7': (443 commits)
Linux 3.11-rc7
ARC: [lib] strchr breakage in Big-endian configuration
VFS: collect_mounts() should return an ERR_PTR
bfs: iget_locked() doesn't return an ERR_PTR
efs: iget_locked() doesn't return an ERR_PTR()
proc: kill the extra proc_readfd_common()->dir_emit_dots()
cope with potentially long ->d_dname() output for shmem/hugetlb
usb: phy: fix build breakage
USB: OHCI: add missing PCI PM callbacks to ohci-pci.c
staging: comedi: bug-fix NULL pointer dereference on failed attach
lib/lz4: correct the LZ4 license
memcg: get rid of swapaccount leftovers
nilfs2: fix issue with counting number of bio requests for BIO_EOPNOTSUPP error detection
nilfs2: remove double bio_put() in nilfs_end_bio_write() for BIO_EOPNOTSUPP error
drivers/platform/olpc/olpc-ec.c: initialise earlier
ipv4: expose IPV4_DEVCONF
ipv6: handle Redirect ICMP Message with no Redirected Header option
be2net: fix disabling TX in be_close()
Revert "ACPI / video: Always call acpi_video_init_brightness() on init"
Revert "genetlink: fix family dump race"
...
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Add error reporting to of_amba_device_create() so the user knows
when (and why) some device tree nodes fail to initialize.
[ The issue was spotted on Universal C210 board (using revision 0 of
ARM Exynos4210 SoC) on which initialization was silently failing
for PL330 MDMA1 device tree node (it was using the wrong addres
resulting in amba_device_add() returning -ENODEV). ]
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Grant Likely <grant.likely@linaro.org>
Pull m68knommu fixes from Greg Ungerer:
"Just a small collection of cleanups and fixes this time, no big
changes. The most interresting are to make the m68k and m68knommu
consistently use CONFIG_IOMAP, clean out some unused board config
options and flush the cache on signal stack creation"
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
m68k: remove 16 unused boards in Kconfig.machine
m68k: define 'VM_DATA_DEFAULT_FLAGS' no matter whether has 'NOMMU' or not
m68knommu: user generic iomap to support ioread*/iowrite*
m68k/coldfire: flush cache when creating the signal stack frame
m68knommu: Mark functions only called from setup_arch() __init
Pull UML updates from Richard Weinberger:
"This pile contains mostly fixes and improvements for issues identified
by Richard W M Jones while adding UML as backend to libguestfs"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml:
um: Add irq chip um/mask handlers
um: prctl: Do not include linux/ptrace.h
um: Run UML in it's own session.
um: Cleanup SIGTERM handling
um: ubd: Introduce submit_request()
um: ubd: Add REQ_FLUSH suppport
um: Implement probe_kernel_read()
um: hostfs: Fix writeback
Fix trivial comment typo for irq_of_parse_and_map().
Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Signed-off-by: Grant Likely <grant.likely@linaro.org>
* 'x86/spinlocks' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/kvm/guest: Fix sparse warning: "symbol 'klock_waiting' was not declared as static"
kvm: Paravirtual ticketlocks support for linux guests running on KVM hypervisor
kvm guest: Add configuration support to enable debug information for KVM Guests
kvm uapi: Add KICK_CPU and PV_UNHALT definition to uapi
xen, pvticketlock: Allow interrupts to be enabled while blocking
x86, ticketlock: Add slowpath logic
jump_label: Split jumplabel ratelimit
x86, pvticketlock: When paravirtualizing ticket locks, increment by 2
x86, pvticketlock: Use callee-save for lock_spinning
xen, pvticketlocks: Add xen_nopvspin parameter to disable xen pv ticketlocks
xen, pvticketlock: Xen implementation for PV ticket locks
xen: Defer spinlock setup until boot CPU setup
x86, ticketlock: Collapse a layer of functions
x86, ticketlock: Don't inline _spin_unlock when using paravirt spinlocks
x86, spinlock: Replace pv spinlocks with pv ticketlocks
Prior to the introduction of page migration support in "fs/aio: Add support
to aio ring pages migration" / 36bc08cc01,
mapping of the ring buffer pages was done via get_user_pages() while
retaining mmap_sem held for write. This avoided possible races with userland
racing an munmap() or mremap(). The page migration patch, however, switched
to using mm_populate() to prime the page mapping. mm_populate() cannot be
called with mmap_sem held.
Instead of dropping the mmap_sem, revert to the old behaviour and simply
drop the use of mm_populate() since get_user_pages() will cause the pages to
get mapped anyways. Thanks to Al Viro for spotting this issue.
Signed-off-by: Benjamin LaHaise <bcrl@kvack.org>
Commit 0195659 introduced a NEON accelerated version of the xor_blocks()
function, but it needs the changes in this patch to allow it to be built
as a module rather than statically into the kernel.
This patch creates a separate module xor-neon.ko which exports the NEON
inner xor_blocks() functions depended upon by the regular xor.ko if it
is built with CONFIG_KERNEL_MODE_NEON=y
Reported-by: Josh Boyer <jwboyer@fedoraproject.org>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
MacBook 6,1 and 6,2 have a CS4208 codec instead of CS4206/CS4207 on
the former models. Most of functions work fine as is, except for the
silent speaker output. After debugging sessions, it turned out that
the machine needs to set GPIO 0 for the speaker amp.
This patch adds the basic support for CS4208 and the fixup for these
MacBooks. Basically the codec works just with the generic parser.
For re-using the existing GPIO amp code and init/free callbacks, a few
places have been changed so that CS4206/4207-specific codes (errata,
etc) won't hit with CS4208.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=60811
Reported-and-tested-by: Imre Kaloz <kaloz@openwrt.org>
Reported-and-tested-by: Ian Munsie <darkstarsword@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When linux is running as dom0, Xen doesn't show the physical cpu but a
virtual CPU.
On some ARM SOC (for instance the exynos 5250), linux registers callbacks
for cpuidle and cpufreq. When these callbacks are called, they will modify
directly the physical cpu not the virtual one. It can impact the whole board
instead of only dom0.
Signed-off-by: Julien Grall <julien.grall@linaro.org>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
m2p_remove_override() calls get_balloon_scratch_page() in
MULTI_update_va_mapping() even though it already has pointer to this page from
the earlier call (in scratch_page). This second call doesn't have a matching
put_balloon_scratch_page() thus not restoring preempt count back. (Also, there
is no put_balloon_scratch_page() in the error path.)
In addition, the second multicall uses __xen_mc_entry() which does not disable
interrupts. Rearrange xen_mc_* calls to keep interrupts off while performing
multicalls.
This commit fixes a regression introduced by:
commit ee0726407f
Author: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Date: Tue Jul 23 17:23:54 2013 +0000
xen/m2p: use GNTTABOP_unmap_and_replace to reinstate the original mapping
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
xen_pm_init was unconditionally setting pm_power_off and arm_pm_restart
function pointers. This breaks multi-platform kernels. Make this
conditional on running as a Xen guest and make it a late_initcall to
ensure it is setup after platform code for Dom0.
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
CC: stable@vger.kernel.org
My g33 here seems to be shockingly good at hitting them all. This time
around kms_flip/flip-vs-panning-vs-hang blows up:
intel_crtc_wait_for_pending_flips correctly checks for gpu hangs and
if a gpu hang is pending aborts the wait for outstanding flips so that
the setcrtc call will succeed and release the crtc mutex. And the gpu
hang handler needs that lock in intel_display_handle_reset to be able
to complete outstanding flips.
The problem is that we can race in two ways:
- Waiters on the dev_priv->pending_flip_queue aren't woken up after
we've the reset as pending, but before we actually start the reset
work. This means that the waiter doesn't notice the pending reset
and hence will keep on hogging the locks.
Like with dev->struct_mutex and the ring->irq_queue wait queues we
there need to wake up everyone that potentially holds a lock which
the reset handler needs.
- intel_display_handle_reset was called _after_ we've already
signalled the completion of the reset work. Which means a waiter
could sneak in, grab the lock and never release it (since the
pageflips won't ever get released).
Similar to resetting the gem state all the reset work must complete
before we update the reset counter. Contrary to the gem reset we
don't need to have a second explicit wake up call since that will
have happened already when completing the pageflips. We also don't
have any issues that the completion happens while the reset state is
still pending - wait_for_pending_flips is only there to ensure we
display the right frame. After a gpu hang&reset events such
guarantees are out the window anyway. This is in contrast to the gem
code where too-early wake-up would result in unnecessary restarting
of ioctls.
Also, since we've gotten these various deadlocks and ordering
constraints wrong so often throw copious amounts of comments at the
code.
This deadlock regression has been introduced in the commit which added
the pageflip reset logic to the gpu hang work:
commit 96a02917a0
Author: Ville Syrjälä <ville.syrjala@linux.intel.com>
Date: Mon Feb 18 19:08:49 2013 +0200
drm/i915: Finish page flips and update primary planes after a GPU reset
v2:
- Add comments to explain how the wake_up serves as memory barriers
for the atomic_t reset counter.
- Improve the comments a bit as suggested by Chris Wilson.
- Extract the wake_up calls before/after the reset into a little
i915_error_wake_up and unconditionally wake up the
pending_flip_queue waiters, again as suggested by Chris Wilson.
v3: Throw copious amounts of comments at i915_error_wake_up as
suggested by Chris Wilson.
Cc: stable@vger.kernel.org
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Toshiba Satellite C870 shows interrupt problems occasionally when
certain mixer controls like "Mic Switch" is toggled. This seems
worked around by not using MSI.
Bugzilla: https://bugzilla.novell.com/show_bug.cgi?id=833585
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Change the hash algorithm a bit so it produces only values in the
range of 0..31.
This allows to reduce the size of the external interrupt handler hash
array even further while making sure that each of the known interrupt
sources keeps its unique hash with the slightly modified algorithm:
0x1004 --> 12
0x1201 --> 10
0x1202 --> 11
0x1406 --> 16
0x1407 --> 17
0x2401 --> 19
0x2603 --> 22
0x4000 --> 0
This also means that the entire array now fits into exactly one cache
line; so add a proper align statement as well.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
When reconnecting to automounts at startup an autofs ioctl is used
to find the device and inode of existing mounts so they can be used
to open a file descriptor of possibly covered mounts.
At this time the the caller might not yet "own" the mount so it can
trigger calling ->d_automount(). This causes automount to hang when
trying to reconnect to direct or offset mount types.
Consequently kern_path() can't be used but kern_path_mountpoint() can be.
Signed-off-by: Ian Kent <raven@themaw.net>
Cc: Jeff Layton <jlayton@redhat.com>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
This is the fix that the last two commits indirectly led up to - making
sure that we don't call dput() in a bad context on the dentries we've
looked up in RCU mode after the sequence count validation fails.
This basically expands d_rcu_to_refcount() into the callers, and then
fixes the callers to delay the dput() in the failure case until _after_
we've dropped all locks and are no longer in an RCU-locked region.
The case of 'complete_walk()' was trivial, since its failure case did
the unlock_rcu_walk() directly after the call to d_rcu_to_refcount(),
and as such that is just a pure expansion of the function with a trivial
movement of the resulting dput() to after 'unlock_rcu_walk()'.
In contrast, the unlazy_walk() case was much more complicated, because
not only does convert two different dentries from RCU to be reference
counted, but it used to not call unlock_rcu_walk() at all, and instead
just returned an error and let the caller clean everything up in
"terminate_walk()".
Happily, one of the dentries in question (called "parent" inside
unlazy_walk()) is the dentry of "nd->path", which terminate_walk() wants
a refcount to anyway for the non-RCU case.
So what the new and improved unlazy_walk() does is to first turn that
dentry into a refcounted one, and once that is set up, the error cases
can continue to use the terminate_walk() helper for cleanup, but for the
non-RCU case. Which makes it possible to drop out of RCU mode if we
actually hit the sequence number failure case.
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The virtio_pci_freeze/restore are defined under CONFIG_PM but is used
by SET_SYSTEM_SLEEP_PM_OPS macro, which is defined under
CONFIG_PM_SLEEP. So if CONFIG_PM_SLEEP is not cofigured but
CONFIG_PM_RUNTIME is, the following warning message appeared:
drivers/virtio/virtio_pci.c:770:12: warning: ‘virtio_pci_freeze’ defined but not used [-Wunused-function]
static int virtio_pci_freeze(struct device *dev)
^
drivers/virtio/virtio_pci.c:790:12: warning: ‘virtio_pci_restore’ defined but not used [-Wunused-function]
static int virtio_pci_restore(struct device *dev)
^
Fix it by changing CONFIG_PM to CONFIG_PM_SLEEP.
Signed-off-by: Aaron Lu <aaron.lu@intel.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
that prepare the code to handle different types of SMB2 leases.
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
This simplifies the RCU to refcounting code in particular.
I was originally intending to leave this for later, but walking through
all the dput() logic (see previous commit), I realized that the dput()
"might_sleep()" check was misleadingly weak. And I removed it as
misleading, both for performance profiling and for debugging.
However, the might_sleep() debugging case is actually true: the final
dput() can indeed sleep, if the inode of the dentry that you are
releasing ends up sleeping at iput time (see dentry_iput()). So the
problem with the might_sleep() in dput() wasn't that it wasn't true, it
was that it wasn't actually testing and triggering on the interesting
case.
In particular, just about *any* dput() can indeed sleep, if you happen
to race with another thread deleting the file in question, and you then
lose the race to the be the last dput() for that file. But because it's
a very rare race, the debugging code would never trigger it in practice.
Why is this problematic? The new d_rcu_to_refcount() (see commit
15570086b5: "vfs: reimplement d_rcu_to_refcount() using
lockref_get_or_lock()") does a dput() for the failure case, and it does
it under the RCU lock. So potentially sleeping really is a bug.
But there's no way I'm going to fix this with the previous complicated
"lockref_get_or_lock()" interface. And rather than revert to the old
and crufty nested dentry locking code (which did get this right by
delaying the reference count updates until they were verified to be
safe), let's make forward progress.
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is me being a bit OCD after all the dentry optimization work this
merge window: profiles end up showing 'dput()' as a rather expensive
operation, and there were two unrelated bad reasons for that.
The first reason was reading d_lockref.count for debugging purposes,
which touches the lockref cacheline (for reads) before really need to.
More importantly, the debugging test in question is _wrong_, and has
hidden bugs. It's true that we can only sleep when the count goes down
to zero, but the test as-is hides the much more subtle bug that happens
if we race with somebody else deleting the file.
Anyway we _will_ touch that cacheline, but let's do it for a write and
in the right routine (ie in "lockref_put_or_lock()") which annotates the
costs better. So remove the misleading debug code.
The other was an unnecessary access to the cacheline that contains the
d_lru list, just to check whether we already were on the LRU list or
not. This is exactly what we have d_flags for, so that we can avoid
touching extra cache lines for the common case. So just add another bit
for "is this dentry on the LRU".
Finally, mark the tests properly likely/unlikely, so that the common
fast-paths are dense in the instruction stream.
This makes the profiles look much saner.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Detangle the additional state of whether or not the hw has the pfit
enabled from whether it has zero size. This allows us to cleanly
distinguish in the code when we expect the pfit to be enabled (for
Haswell pc8), and when the BIOS is confused and needs sanitizing.
Reported-by: shui yanwei <yangweix.shui@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=68251
Tested-by: shui yanwei <yangweix.shui@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Jeff's patchset introduced trivial sparse warning on new cifs toupper routine
Signed-off-by: Steve French <smfrench@gmail.com>
CC: Jeff Layton <jlayton@redhat.com>
Switch smb2 code to use per session session key and smb3 code to
use per session signing key instead of per connection key to
generate signatures.
For that, we need to find a session to fetch the session key to
generate signature to match for every request and response packet.
We also forgo checking signature for a session setup response
from the server.
Acked-by: Jeff Layton <jlayton@samba.org>
Signed-off-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Add a variable specific to NTLMSSP authentication to determine
whether to exchange keys during negotiation and authentication phases.
Since session key for smb1 is per smb connection, once a very first
sesion is established, there is no need for key exchange during
subsequent session setups. As a result, smb1 session setup code sets this
variable as false.
Since session key for smb2 and smb3 is per smb connection, we need to
exchange keys to generate session key for every sesion being established.
As a result, smb2/3 session setup code sets this variable as true.
Acked-by: Jeff Layton <jlayton@samba.org>
Signed-off-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Move the post (successful) session setup code to respective dialect routines.
For smb1, session key is per smb connection.
For smb2/smb3, session key is per smb session.
If client and server do not require signing, free session key for smb1/2/3.
If client and server require signing
smb1 - Copy (kmemdup) session key for the first session to connection.
Free session key of that and subsequent sessions on this connection.
smb2 - For every session, keep the session key and free it when the
session is being shutdown.
smb3 - For every session, generate the smb3 signing key using the session key
and then free the session key.
There are two unrelated line formatting changes as well.
Reviewed-by: Jeff Layton <jlayton@samba.org>
Signed-off-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Convert cpu_to_le32(le32_to_cpu(E1) + E2) to use le32_add_cpu().
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Reviewed-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Signed-off-by: Steve French <smfrench@gmail.com>
If a server sends a lease break to a connection that doesn't have
opens with a lease key specified in the server response, we can't
find an open file to send an ack. Fix this by walking through
all connections we have.
Cc: <stable@vger.kernel.org>
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
This happens when we receive a lease break from a server, then
find an appropriate lease key in opened files and schedule the
oplock_break slow work. lw pointer isn't freed in this case.
Cc: <stable@vger.kernel.org>
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
Add the script used to generate the case-conversion tables to the
Documentation/ directory, in case we ever need to update or regenerate
these tables in the future.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Have the case-insensitive d_compare and d_hash routines convert each
character in the filenames to wchar_t's and then use the new
cifs_toupper routine to convert those into uppercase.
With this scheme we should more closely emulate the case conversion that
the servers will do.
Reported-and-Tested-by: Jan-Marek Glogowski <glogow@fbihome.de>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
The existing NLS case conversion routines do not appropriately handle
the (now common) case where the local host is using UTF8. This is
because nls_utf8 has no support at all for converting a utf8 string
between cases and the NLS infrastructure in general cannot handle
a multibyte input character.
In any case, what we really need for cifs is to emulate how we expect
the server to convert the character to upper or lowercase. Thus, even
if we had routines that could handle utf8 case conversion, we likely
would end up with the wrong result if the name ends up being in the
upper planes.
This patch adds a new scheme for doing unicode case conversion. The
case conversion tables that Microsoft has published for Windows 8
have been converted to a set of lookup tables, and a routine is
added to convert a wchar_t from lower to uppercase using those
tables.
Reported-and-Tested-by: Jan-Marek Glogowski <glogow@fbihome.de>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
