Based on
"mfd: syscon: Decouple syscon interface from platform devices"
(sha1: bdb0066df9)
SLCR driver can use syscon/regmap drivers directly.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Convert the integrator PCI driver to use the generic config access
functions.
This changes accesses from __raw_readX/__raw_writeX to readX/writeX
variants. The spinlock is removed because it is unnecessary. The config
read and write functions are already protected with a spinlock and no
access can occur during the .pre_init function.
[arnd: remove unused "flags"]
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
CC: Russell King <linux@arm.linux.org.uk>
CC: linux-arm-kernel@lists.infradead.org
Add the PCI controller node for the Versatile/PB board.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
CC: Russell King <linux@arm.linux.org.uk>
This patch adds new kvm_x86_ops dirty logging hooks to enable/disable dirty
logging for particular memory slot, and to flush potentially logged dirty GPAs
before reporting slot->dirty_bitmap to userspace.
kvm x86 common code calls these hooks when they are available so PML logic can
be hidden to VMX specific. SVM won't be impacted as these hooks remain NULL
there.
Signed-off-by: Kai Huang <kai.huang@linux.intel.com>
Reviewed-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch changes the second parameter of kvm_mmu_slot_remove_write_access from
'slot id' to 'struct kvm_memory_slot *' to align with kvm_x86_ops dirty logging
hooks, which will be introduced in further patch.
Better way is to change second parameter of kvm_arch_commit_memory_region from
'struct kvm_userspace_memory_region *' to 'struct kvm_memory_slot * new', but it
requires changes on other non-x86 ARCH too, so avoid it now.
Signed-off-by: Kai Huang <kai.huang@linux.intel.com>
Reviewed-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch avoids unnecessary dirty GPA logging to PML buffer in EPT violation
path by setting D-bit manually prior to the occurrence of the write from guest.
We only set D-bit manually in set_spte, and leave fast_page_fault path
unchanged, as fast_page_fault is very unlikely to happen in case of PML.
For the hva <-> pa change case, the spte is updated to either read-only (host
pte is read-only) or be dropped (host pte is writeable), and both cases will be
handled by above changes, therefore no change is necessary.
Signed-off-by: Kai Huang <kai.huang@linux.intel.com>
Reviewed-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch adds new mmu layer functions to clear/set D-bit for memory slot, and
to write protect superpages for memory slot.
In case of PML, CPU logs the dirty GPA automatically to PML buffer when CPU
updates D-bit from 0 to 1, therefore we don't have to write protect 4K pages,
instead, we only need to clear D-bit in order to log that GPA.
For superpages, we still write protect it and let page fault code to handle
dirty page logging, as we still need to split superpage to 4K pages in PML.
As PML is always enabled during guest's lifetime, to eliminate unnecessary PML
GPA logging, we set D-bit manually for the slot with dirty logging disabled.
Signed-off-by: Kai Huang <kai.huang@linux.intel.com>
Reviewed-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We don't have to write protect guest memory for dirty logging if architecture
supports hardware dirty logging, such as PML on VMX, so rename it to be more
generic.
Signed-off-by: Kai Huang <kai.huang@linux.intel.com>
Reviewed-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The Versatile boards have the same sysregs as other ARM Ltd boards. Add
the nodes in order to enable support for 24MHz counter as sched_clock.
This is a minimal node definition as the existing sub node definition
used on VExpress has some issues raised by Linus W.
Signed-off-by: Rob Herring <robh@kernel.org>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: devicetree@vger.kernel.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
The rk3288 board uses the architected timers and these ones are shutdown when
the cpu is powered down. There is a need of a broadcast timer in this case to
ensure proper wakeup when the cpus are in sleep mode and a timer expires.
This driver provides the basic timer functionnality as a backup for the local
timers at sleep time.
The timer belongs to the alive subsystem. It includes two programmables 64 bits
timer channels but the driver only uses 32bits. It works with two operations
mode: free running and user defined count.
Programing sequence:
1. Timer initialization:
* Disable the timer by writing '0' to the CONTROLREG register
* Program the timer mode by writing the mode to the CONTROLREG register
* Set the interrupt mask
2. Setting the count value:
* Load the count value to the registers COUNT0 and COUNT1 (not used).
3. Enable the timer
* Write '1' to the CONTROLREG register with the mode (free running or user)
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
The time Kconfig expects that NR_CPUS is defined.
This patch removes this config warning:
"kernel/time/Kconfig:163:warning: range is invalid"
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
Avoids the warning about:
warning: 'bite_in_progress' defined but not used [-Wunused-variable]
Variable is only used if the Kconfig CONFIG_ETRAX_WATCHDOG_NICE_DOGGY
is set.
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
Move declaration of waitqueue to beginning of block,
avoids warning about mixing declarations and code.
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
Allows that symbol to be used in modules, and fixes
the following on allmodconfig:
ERROR: "csum_partial_copy_nocheck" [net/ipv6/ipv6.ko] undefined!
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
As of commit 9a1091ef00 ("irqchip: gic: Support hierarchy irq
domain."), the Lager legacy board support is known to be broken.
The IRQ numbers of the GIC are now virtual, and no longer match the
hardcoded hardware IRQ numbers in the legacy platform board code.
To fix this issue specific to non-multiplatform r8a7790 and Lager:
1) Instantiate the GIC from platform board code and also
2) Skip over the DT arch timer as well as
3) Force delay setup based on DT CPU frequency
With these 3 fixes in place interrupts on Lager are now unbroken.
Partially based on legacy GIC fix by Geert Uytterhoeven, thanks to
him for the initial work.
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Make use of gcc's hotpatch support to generate better code for ftrace
function tracing.
The generated code now contains only a six byte nop in each function
prologue instead of a 24 byte code block which will be runtime patched to
support function tracing.
With the new code generation the runtime overhead for supporting function
tracing is close to zero, while the original code did show a significant
performance impact.
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Christian Borntraeger reported that the now missing diag 44 calls (voluntary
time slice end) does cause a performance regression for stop_machine() calls
if a machine has more virtual cpus than the host has physical cpus.
This patch mainly reverts 57f2ffe14f ("s390: remove diag 44 calls from
cpu_relax()") with the exception that we still do not issue diag 44 calls if
running with smt enabled. Due to group scheduling algorithms when running in
LPAR this would lead to significant latencies.
However, when running in LPAR we do not have more virtual than physical cpus.
Reported-and-tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
As of commit 9a1091ef00 ("irqchip: gic: Support hierarchy irq
domain."), the APE6EVM legacy board support is known to be broken.
The IRQ numbers of the GIC are now virtual, and no longer match the
hardcoded hardware IRQ numbers in the legacy platform board code.
To fix this issue specific to non-muliplatform r8a73a4 and APE6EVM:
1) Instantiate the GIC from platform board code and also
2) Skip over the DT arch timer as well as
3) Force delay setup based on DT CPU frequency
With these 3 fixes in place interrupts on APE6EVM are now unbroken.
Partially based on legacy GIC fix by Geert Uytterhoeven, thanks to
him for the initial work.
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
The DISP1 power domain on Exynos5420 SoC includes the FIMD1, MIXER
and HDMI modules. Add a device node for this power domain and mark
these modules as consumer of the DISP1 power domain.
When a power domain is powered on and off, the input clocks of the
devices attached to it are reparented. So a reference to the input
and parent clocks of the devices are needed to manage that.
Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
375/38x. Only switch the PL310 to I/O coherent mode if I/O coherency
is enabled.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=qzYQ
-----END PGP SIGNATURE-----
Merge tag 'mvebu-fixes-3.19-6' of git://git.infradead.org/linux-mvebu into fixes
Merge "mvebu-fixes-6" from Andrew Lunn:
The previous fix for Armada XP, disabling I/O coherency, broke Armada
375/38x. Only switch the PL310 to I/O coherent mode if I/O coherency
is enabled.
* tag 'mvebu-fixes-3.19-6' of git://git.infradead.org/linux-mvebu:
ARM: mvebu: don't set the PL310 in I/O coherency mode when I/O coherency is disabled
Signed-off-by: Olof Johansson <olof@lixom.net>
The Exynos5420 cluster power management support allowing Exynos
5420/5422/5800 machines to power up and down the secondary CPUs.
Without this option enabled, the secondary CPUs are not brought
up on boot and the following error is shown:
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Setting up static identity map for 0x40938e90 - 0x40938f28
ARM CCI driver probed
CPU1: failed to boot: -38
CPU2: failed to boot: -38
CPU3: failed to boot: -38
CPU4: failed to boot: -38
CPU5: failed to boot: -38
CPU6: failed to boot: -38
CPU7: failed to boot: -38
Brought up 1 CPUs
Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Olof Johansson <olof@lixom.net>
Since commit f2c3c67f00 (merge commit that adds commit "ARM: mvebu:
completely disable hardware I/O coherency"), we disable I/O coherency
on Armada EBU platforms.
However, we continue to initialize the coherency fabric, because this
coherency fabric is needed on Armada XP for inter-CPU
coherency. Unfortunately, due to this, we also continued to execute
the coherency fabric initialization code for Armada 375/38x, which
switched the PL310 into I/O coherent mode. This has the effect of
disabling the outer cache sync operation: this is needed when I/O
coherency is enabled to work around a PCIe/L2 deadlock. But obviously,
when I/O coherency is disabled, having the outer cache sync operation
is crucial.
Therefore, this commit fixes the armada_375_380_coherency_init() so
that the PL310 is switched to I/O coherent mode only if I/O coherency
is enabled.
Without this fix, all devices using DMA are broken on Armada 375/38x.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Tested-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Cc: <stable@vger.kernel.org> # v3.8+
Looks like I only got half done with moving pinctrl and syscon to
be children of the SCM. I've set up the FAPLL clocks that way already,
but did not complete the job as I copied the syscon values from
am33xx.dtsi.
To make sure the syscon mapping works, I've verfified that we can
set up davinci_emac mac address the same way as cpsw already does
with the syscon mapping. So let's add that too.
Cc: Brian Hutchinson <b.hutchman@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Unlike MSI, which is configured via registers in the MSI capability in
Configuration Space, MSI-X is configured via tables in Memory Space.
These MSI-X tables are mapped by a device BAR, and if no Memory Space
has been assigned to the BAR, MSI-X cannot be used.
Fail MSI-X setup if no space has been assigned for the BAR.
Previously, we ioremapped the MSI-X table even if the resource hadn't been
assigned. In this case, the resource address is undefined (and is often
zero), which may lead to warnings or oopses in this path:
pci_enable_msix
msix_capability_init
msix_map_region
ioremap_nocache
The PCI core sets resource flags to zero when it can't assign space for the
resource (see reset_resource()). There are also some cases where it sets
the IORESOURCE_UNSET flag, e.g., pci_reassigndev_resource_alignment(),
pci_assign_resource(), etc. So we must check for both cases.
[bhelgaas: changelog]
Reported-by: Zhang Jukuo <zhangjukuo@huawei.com>
Tested-by: Zhang Jukuo <zhangjukuo@huawei.com>
Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
The new hw_breakpoint bits are now ready for v3.20, merge them
into the main branch, to avoid conflicts.
Conflicts:
tools/perf/Documentation/perf-record.txt
Signed-off-by: Ingo Molnar <mingo@kernel.org>
of this is an IST rework. When an IST exception interrupts user
space, we will handle it on the per-thread kernel stack instead of
on the IST stack. This sounds messy, but it actually simplifies the
IST entry/exit code, because it eliminates some ugly games we used
to play in order to handle rescheduling, signal delivery, etc on the
way out of an IST exception.
The IST rework introduces proper context tracking to IST exception
handlers. I haven't seen any bug reports, but the old code could
have incorrectly treated an IST exception handler as an RCU extended
quiescent state.
The memory failure change (included in this pull request with
Borislav and Tony's permission) eliminates a bunch of code that
is no longer needed now that user memory failure handlers are
called in process context.
Finally, this includes a few on Denys' uncontroversial and Obviously
Correct (tm) cleanups.
The IST and memory failure changes have been in -next for a while.
LKML references:
IST rework:
http://lkml.kernel.org/r/cover.1416604491.git.luto@amacapital.net
Memory failure change:
http://lkml.kernel.org/r/54ab2ffa301102cd6e@agluck-desk.sc.intel.com
Denys' cleanups:
http://lkml.kernel.org/r/1420927210-19738-1-git-send-email-dvlasenk@redhat.com
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJUtvkFAAoJEK9N98ZeDfrkcfsIAJxZ0UBUCEDvulbqgk/iPGOa
fIpKLMowS7CpKtw6Wdc/YvAIkeHXWm1vU44Hj0TrjSrXCgVF8yCngs/xlXtOjoa1
dosXQqgqVJJ+hyui7chAEWyalLW7bEO8raq/6snhiMrhiuEkVKpEr7Fer4FVVCZL
4VALmNQQsbV+Qq4pXIhuagZC0Nt/XKi/+/cKvhS4p//q1F/TbHTz0FpDUrh0jPMh
18WFy0jWgxdkMRnSp/wJhekvdXX6PwUy5BdES9fjw8LQJZxxFpqN3Fe1kgfyzV0k
yuvEHw1hPt2aBGj3q69wQvDVyyn4OqMpRDBhk4S+GJYmVh7mFyFMN4BDMEy/EY8=
=LXVl
-----END PGP SIGNATURE-----
Merge tag 'pr-20150114-x86-entry' of git://git.kernel.org/pub/scm/linux/kernel/git/luto/linux into x86/asm
Pull x86/entry enhancements from Andy Lutomirski:
" This is my accumulated x86 entry work, part 1, for 3.20. The meat
of this is an IST rework. When an IST exception interrupts user
space, we will handle it on the per-thread kernel stack instead of
on the IST stack. This sounds messy, but it actually simplifies the
IST entry/exit code, because it eliminates some ugly games we used
to play in order to handle rescheduling, signal delivery, etc on the
way out of an IST exception.
The IST rework introduces proper context tracking to IST exception
handlers. I haven't seen any bug reports, but the old code could
have incorrectly treated an IST exception handler as an RCU extended
quiescent state.
The memory failure change (included in this pull request with
Borislav and Tony's permission) eliminates a bunch of code that
is no longer needed now that user memory failure handlers are
called in process context.
Finally, this includes a few on Denys' uncontroversial and Obviously
Correct (tm) cleanups.
The IST and memory failure changes have been in -next for a while.
LKML references:
IST rework:
http://lkml.kernel.org/r/cover.1416604491.git.luto@amacapital.net
Memory failure change:
http://lkml.kernel.org/r/54ab2ffa301102cd6e@agluck-desk.sc.intel.com
Denys' cleanups:
http://lkml.kernel.org/r/1420927210-19738-1-git-send-email-dvlasenk@redhat.com
"
This tree semantically depends on and is based on the following RCU commit:
734d168013 ("rcu: Make rcu_nmi_enter() handle nesting")
... and for that reason won't be pushed upstream before the RCU bits hit Linus's tree.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The {pgd,pud,pmd}_bad family of macros have slightly fuzzy
cross-architecture semantics, and seem to imply a populated entry that
is not a next-level table, rather than a particular type of entry (e.g.
a section map).
In arm64 code, for those cases where we care about whether an entry is a
section mapping, we can instead use the {pud,pmd}_sect macros to
explicitly check for this case. This helps to document precisely what we
care about, making the code easier to read, and allows for future
relaxation of the *_bad macros to check for other "bad" entries.
To that end this patch updates the table dumping and initial table setup
to check for section mappings with {pud,pmd}_sect, and adds/restores
BUG_ON(*_bad((*p)) checks after we've handled the *_sect and *_none
cases so as to catch remaining "bad" cases.
In the fault handling code, show_pte is left with *_bad checks as it
only cares about whether it can walk the next level table, and this path
is used for both kernel and userspace fault handling. The former case
will be followed by a die() where we'll report the address that
triggered the fault, which can be useful context for debugging.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Steve Capper <steve.capper@linaro.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Laura Abbott <lauraa@codeaurora.org>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
In paging_init, we call flush_cache_all, but this is backed by Set/Way
operations which may not achieve anything in the presence of cache line
migration and/or system caches. If the caches are already in an
inconsistent state at this point, there is nothing we can do (short of
flushing the entire physical address space by VA) to empty architected
and system caches. As such, flush_cache_all only serves to mask other
potential bugs. Hence, this patch removes the boot-time call to
flush_cache_all.
Immediately after the cache maintenance we flush the TLBs, but this is
also unnecessary. Before enabling the MMU, the TLBs are invalidated, and
thus are initially clean. When changing the contents of active tables
(e.g. in fixup_executable() for DEBUG_RODATA) we perform the required
TLB maintenance following the update, and therefore no additional
maintenance is required to ensure the new table entries are in effect.
Since activating the MMU we will not have modified system register
fields permitted to be cached in a TLB, and therefore do not need
maintenance for any cached system register fields. Hence, the TLB flush
is unnecessary.
Shortly after the unnecessary TLB flush, we update TTBR0 to point to an
empty zero page rather than the idmap, and flush the TLBs. This
maintenance is necessary to remove the global idmap entries from the
TLBs (as they would conflict with userspace mappings), and is retained.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Acked-by: Steve Capper <steve.capper@linaro.org>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
In one pinctrl node, a 'bias-disable' property is erroneously assigned a
value.
Fixes: ARM: zynq: DT: Add pinctrl information
Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Use the "foreign" page flag to mark pages that have a grant map. Use
page->private to store information of the grant (the granting domain
and the grant reference).
Signed-off-by: Jennifer Herbert <jennifer.herbert@citrix.com>
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Ballooned pages are always used for grant maps which means the
original frame does not need to be saved in page->index nor restored
after the grant unmap.
This allows the workaround in netback for the conflicting use of the
(unionized) page->index and page->pfmemalloc to be removed.
Signed-off-by: Jennifer Herbert <jennifer.herbert@citrix.com>
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
The scratch frame mappings for ballooned pages and the m2p override
are broken. Remove them in preparation for replacing them with
simpler mechanisms that works.
The scratch pages did not ensure that the page was not in use. In
particular, the foreign page could still be in use by hardware. If
the guest reused the frame the hardware could read or write that
frame.
The m2p override did not handle the same frame being granted by two
different grant references. Trying an M2P override lookup in this
case is impossible.
With the m2p override removed, the grant map/unmap for the kernel
mappings (for x86 PV) can be easily batched in
set_foreign_p2m_mapping() and clear_foreign_p2m_mapping().
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
When unmapping grants, instead of converting the kernel map ops to
unmap ops on the fly, pre-populate the set of unmap ops.
This allows the grant unmap for the kernel mappings to be trivially
batched in the future.
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
For 64K page system, after mapping a PMD section, the corresponding initial
page table is not needed any more. That page can be freed.
Signed-off-by: Zhichang Yuan <zhichang.yuan@linaro.org>
[catalin.marinas@arm.com: added BUG_ON() to catch late memblock freeing]
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
This patch fixes a systematic crash in rapl_scale()
due to an invalid pointer.
The bug was introduced by commit:
89cbc76768 ("x86: Replace __get_cpu_var uses")
The fix is simple. Just put the parenthesis where it needs
to be, i.e., around rapl_pmu. To my surprise, the compiler
was not complaining about passing an integer instead of a
pointer.
Reported-by: Vince Weaver <vincent.weaver@maine.edu>
Tested-by: Vince Weaver <vincent.weaver@maine.edu>
Fixes: 89cbc76768 ("x86: Replace __get_cpu_var uses")
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: cl@linux.com
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/20150122203834.GA10228@thinkpad
Signed-off-by: Ingo Molnar <mingo@kernel.org>
There were some issues about the uncore driver tried to access
non-existing boxes, which caused boot crashes. These issues have
been all fixed. But we should avoid boot failures if that ever
happens again.
This patch intends to prevent this kind of potential issues.
It moves uncore_box_init out of driver initialization. The box
will be initialized when it's first enabled.
Signed-off-by: Kan Liang <kan.liang@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1421729665-5912-1-git-send-email-kan.liang@intel.com
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Yan, Zheng <zheng.z.yan@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Add the clock property for the watchdog on rk3288 socs.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Doug Anderson <dianders@chromium.org>
Tested-by: Doug Anderson <dianders@chromium.org>
The file arch/x86/xen/mmu.c has some functions that can be annotated
with "__init".
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Some more functions in arch/x86/xen/setup.c can be made "__init".
xen_ignore_unusable() can be made "static".
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
In many places in arch/x86/xen/setup.c wrong types are used for
physical addresses (u64 or unsigned long long). Use phys_addr_t
instead.
Use macros already defined instead of open coding them.
Correct some other type mismatches.
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
