gpiolib returns -ENXIO if struct gpio_chip::to_irq isn't set, so it's
safe to always call.
Based on PPC patch
"powerpc/gpio: support gpio_to_irq()"
78331aded9
Signed-off-by: Michal Simek <monstr@monstr.eu>
Use asm-generic/pci-dma-compat.h instead of the homegrown
pci_set_dma_mask and pci_set_consistent_dma_mask.
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
OUTPUT_FORMAT setup bigendian platform. Microblaze Linux port
is becoming bi endian that's why it is removed.
Signed-off-by: Michal Simek <monstr@monstr.eu>
CONFIG_CONTIGUOUS_PAGE_ALLOC doesn't exist in Kconfig, therefore removing
all references to it from the source.
Signed-off-by: Christian Dietrich <qy03fugy@stud.informatik.uni-erlangen.de>
Signed-off-by: Michal Simek <monstr@monstr.eu>
Kernel needs two timers because of clocksource and clockevent.
It is better to show warning message directly on early
console if available. If it isn't available kernel log buffer
contains it.
Signed-off-by: Michal Simek <monstr@monstr.eu>
Signal code uses r3 value which saved in restore_sigcontext to
rt_sigframe but it require to be zeroed. If is not zero rt_sigframe
contains wrong values.
Signed-off-by: Michal Simek <monstr@monstr.eu>
Do not save return registers before rt_sigreturn is called.
_user_exception(syscall handler) already setup return address
that's why it is removed from rt_sigreturn_wrapper.
Signed-off-by: Michal Simek <monstr@monstr.eu>
Old gdb uses priviledged exception handler to handle
gdb exception. New gdb uses brki r16, 0x18 that's why
we can remove old gdb support.
Signed-off-by: Michal Simek <monstr@monstr.eu>
Compilation warning:
mm/memory.c: In function '__pte_alloc':
mm/memory.c:421: warning: assignment makes integer from pointer without a cast
Signed-off-by: Michal Simek <monstr@monstr.eu>
I forget to remove unused variable from kgdb_arch_handle_exception.
Fix return value in microblaze_kgdb_break function.
Error log:
arch/microblaze/kernel/kgdb.c: In function 'microblaze_kgdb_break':
arch/microblaze/kernel/kgdb.c:83: warning: 'return' with a value, in function returning void
arch/microblaze/kernel/kgdb.c: In function 'kgdb_arch_handle_exception':
arch/microblaze/kernel/kgdb.c:119: warning: unused variable 'cpu'
Signed-off-by: Michal Simek <monstr@monstr.eu>
The external GPIO interrupts of the ColdFire 5272 SoC are edge triggered,
unlike the internal interrupt sources (which are level triggered).
Add proper support for these interrupts.
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
The vector field of the processors exception frame actually contains
both the vector exception number and fault status field bits.
The exception processing code was not correctly masking out the
fault status field bits before switching on the vector number.
The default case was catching the bad check, but we are reporting
the wrong kind of exception in some cases.
Reported-by: Alexander Stein <alexander.stein@systec-electronic.com>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Replace EXTRA_CFLAGS with ccflags-y and EXTRA_AFLAGS with asflags-y.
Signed-off-by: matt mooney <mfm@muteddisk.com>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Serial lines on the MCF548x have really big fifos : 512 bytes.
Signed-off-by: Philippe De Muyter <phdm@macqel.be>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Add a very basic mmu-less support for coldfire m548x family. This is perhaps
also valid for m547x family. The port comprises the serial, tick timer and
reboot support. The gpio part compiles but is empty. This gives a functional
albeit limited linux for the m548x coldfire family. This has been tested
on a Freescale M548xEVB Lite board with a M5484 processor and the default
dbug monitor.
Signed-off-by: Philippe De Muyter <phdm@macqel.be>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
The use of __do_IRQ is deprecated, so lets stop using it.
Generally the interrupts on the supported processors here are
level triggered, so this is strait forward to switch over to
using the standard handle_level_irq flow handler. (Although
some ColdFire parts support edge triggered GPIO line interrupts
we have no support for them yet).
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
In m68k/m68knommu assembly files, the same value is called sometimes
PT_OFF_VECTOR, but more frequently PT_OFF_FORMATVEC. Standardize
name to PT_OFF_FORMATVEC.
Signed-off-by: Philippe De Muyter <phdm@macqel.be>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
The Coldfire MCF547x/MCF548x have the same interrupt controller as
the MCF528x e.g., but only one, not two as in the MCF528x. Modify
intc-2.c to support only one interrupt controller if MCFICM_INTC1 is
not defined.
Signed-off-by: Philippe De Muyter <phdm@macqel.be>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
m68k{nommu}/asm-offsets.c define many constants which are not used
anymore anywhere; remove IRQ_DEVID, IRQ_HANDLER, IRQ_NEXT, STAT_IRQ,
TASK_ACTIVE_MM, TASK_BLOCKED, TASK_FLAGS, TASK_PTRACE, TASK_STATE,
TASK_THREAD_INFO, TI_CPU, TI_EXECDOMAIN and TI_TASK.
Signed-off-by: Philippe De Muyter <phdm@macqel.be>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
The chips lists were in commit logs, but should also be in source files.
This way it is easier to choose the right source file for a not yet
supported Coldfire.
Signed-off-by: Philippe De Muyter <phdm@macqel.be>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
strace enabled is marked using the `flags' field of the `thread_info' struct.
68360 version of entry.S did test a wrong bit in a wrong structure
(task_struct).
68328 version of entry.S did test the right bit in the right structure,
but wrongly, because the `flags' field is 32 bit wide, while the used
assembler insn (btst) only accesses a 8 bit byte in memory.
Fix both using code already used in the coldfire version of entry.S
Signed-off-by: Philippe De Muyter <phdm@macqel.be>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Currently m68knommu boards without RTC chip start with an unexpected
default date of 1999-11-30 (Actually the source asks for 2000-00-00)
Make that 1970-01-01 instead, as expected.
Signed-off-by: Philippe De Muyter <phdm@macqel.be>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
CONFIG_68328_SERIAL_UART2 doesn't exist in Kconfig, therefore removing
all references to it from the source.
Signed-off-by: Christian Dietrich <qy03fugy@stud.informatik.uni-erlangen.de>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
CONFIG_RAM_{16,32}_MB doesn't exist in Kconfig, therefore removing
all references to it from the source.
Signed-off-by: Christian Dietrich <qy03fugy@stud.informatik.uni-erlangen.de>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
CONFIG_M68KFPU_EMU doesn't exist in Kconfig, therefore removing
all references to it from the source. This Flags seems to exist only
on m68k with mmu, and this dead blocks are copy paste.
Signed-off-by: Christian Dietrich <qy03fugy@stud.informatik.uni-erlangen.de>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
CONFIG_RELOCATE doesn't exist in Kconfig, therefore removing
all references to it from the source.
Signed-off-by: Christian Dietrich <qy03fugy@stud.informatik.uni-erlangen.de>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
CONFIG_M68000 doesn't exist in Kconfig, therefore removing
all references to it from the source.
Signed-off-by: Christian Dietrich <qy03fugy@stud.informatik.uni-erlangen.de>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
When CONFIG_NF_CONNTRACK_SECMARK is not set we accidentally attempt to use
the secmark fielf of struct nf_conn. Problem is when that config isn't set
the field doesn't exist. whoops. Wrap the incorrect usage in the config.
Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>
/selinux/policy allows a user to copy the policy back out of the kernel.
This patch allows userspace to actually mmap that file and use it directly.
Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>
There is interest in being able to see what the actual policy is that was
loaded into the kernel. The patch creates a new selinuxfs file
/selinux/policy which can be read by userspace. The actual policy that is
loaded into the kernel will be written back out to userspace.
Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>
AVTAB_MAX_SIZE was a define which was supposed to be used in userspace to
define a maximally sized avtab when userspace wasn't sure how big of a table
it needed. It doesn't make sense in the kernel since we always know our table
sizes. The only place it is used we have a more appropiately named define
called AVTAB_MAX_HASH_BUCKETS, use that instead.
Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>
