Added the support for automatic mic selection via plugging for
Realtek codecs (in auto-probing mode). The auto-mic mode is enabled
only when one internal mic and one external mic are present.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6:
mm_for_maps: take ->cred_guard_mutex to fix the race with exec
mm_for_maps: shift down_read(mmap_sem) to the caller
mm_for_maps: simplify, use ptrace_may_access()
Fix the following 'make includecheck' warning:
arch/mn10300/include/asm/pci.h: linux/mm.h is included more than once.
Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
clean up type-casting twice. "size_t" is typedef as "unsigned long" in
64-bit system, and "unsigned int" in 32-bit system, and the intermediate
cast to 'long' is pointless.
Signed-off-by: Figo.zhang <figo1802@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This will register the ioctl range used by nilfs2 file system to the
table listed in Documentation/ioctl/ioctl-number.txt.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We compute the perf raw sample size by aligning the raw ftrace
event size plus the buffer size field itself. We do that
instead of aligning only the perf raw sample size, so that we
might economize some in some cases.
But this buffer size field is not stored in the perf raw
sample, we must then substract its size from the buffer once we
computed the alignment unless we may get a useless u32 field in
the buffer.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <20090810141129.GA5124@nowhere>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
If --pretty=raw is given to perf report -T, it now displays one
line per-thread per-counter with the raw event id added.
We get:
# PID TID Name Raw Count
18608 18609 cache-misses 28e 416744
18608 18609 cache-references 28f 6456792
18608 18608 cache-misses 28e 448219
18608 18608 cache-references 28f 7270244
instead of:
# PID TID cache-misses cache-references
18608 18609 416744 6456792
18608 18608 448219 7270244
Signed-off-by: Brice Goglin <Brice.Goglin@inria.fr>
Acked-by: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <4A802008.5050409@inria.fr>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Need to add the REQUEUE_PI checks to the compat_sys_futex API
as well to ensure 32 bit requeue's work fine on a 64 bit
system. Patch is against latest tip
Signed-off-by: Dinakar Guniguntala <dino@in.ibm.com>
Cc: Darren Hart <dvhltc@us.ibm.com>
LKML-Reference: <20090810130142.GA23619@in.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Subject: [PATCH] nfs: remove superfluous BUG_ON()s
Remove duplicated BUG_ON()s from nfs[4]_create_server()
(we make the same checks earlier in both functions).
This takes care of the following entries from Dan's list:
fs/nfs/client.c +1078 nfs_create_server(47) warning: variable derefenced before check 'server->nfs_client'
fs/nfs/client.c +1079 nfs_create_server(48) warning: variable derefenced before check 'server->nfs_client->rpc_ops'
fs/nfs/client.c +1363 nfs4_create_server(43) warning: variable derefenced before check 'server->nfs_client'
fs/nfs/client.c +1364 nfs4_create_server(44) warning: variable derefenced before check 'server->nfs_
Reported-by: Dan Carpenter <error27@gmail.com>
Cc: corbet@lwn.net
Cc: eteo@redhat.com
Cc: Julia Lawall <julia@diku.dk>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Hi.
I have a proposal for possibly resolving this issue.
I believe that this situation occurs due to the way that the
Linux NFS client handles writes which modify partial pages.
The Linux NFS client handles partial page modifications by
allocating a page from the page cache, copying the data from
the user level into the page, and then keeping track of the
offset and length of the modified portions of the page. The
page is not marked as up to date because there are portions
of the page which do not contain valid file contents.
When a read call comes in for a portion of the page, the
contents of the page must be read in the from the server.
However, since the page may already contain some modified
data, that modified data must be written to the server
before the file contents can be read back in the from server.
And, since the writing and reading can not be done atomically,
the data must be written and committed to stable storage on
the server for safety purposes. This means either a
FILE_SYNC WRITE or a UNSTABLE WRITE followed by a COMMIT.
This has been discussed at length previously.
This algorithm could be described as modify-write-read. It
is most efficient when the application only updates pages
and does not read them.
My proposed solution is to add a heuristic to decide whether
to do this modify-write-read algorithm or switch to a read-
modify-write algorithm when initially allocating the page
in the write system call path. The heuristic uses the modes
that the file was opened with, the offset in the page to
read from, and the size of the region to read.
If the file was opened for reading in addition to writing
and the page would not be filled completely with data from
the user level, then read in the old contents of the page
and mark it as Uptodate before copying in the new data. If
the page would be completely filled with data from the user
level, then there would be no reason to read in the old
contents because they would just be copied over.
This would optimize for applications which randomly access
and update portions of files. The linkage editor for the
C compiler is an example of such a thing.
I tested the attached patch by using rpmbuild to build the
current Fedora rawhide kernel. The kernel without the
patch generated about 269,500 WRITE requests. The modified
kernel containing the patch generated about 261,000 WRITE
requests. Thus, about 8,500 fewer WRITE requests were
generated. I suspect that many of these additional
WRITE requests were probably FILE_SYNC requests to WRITE
a single page, but I didn't test this theory.
The difference between this patch and the previous one was
to remove the unneeded PageDirty() test. I then retested to
ensure that the resulting system continued to behave as
desired.
Thanx...
ps
Signed-off-by: Peter Staubach <staubach@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Give waitqueue spinlocks their own lockdep classes when they
are initialised from init_waitqueue_head(). This means that
struct wait_queue::func functions can operate other waitqueues.
This is used by CacheFiles to catch the page from a backing fs
being unlocked and to wake up another thread to take a copy of
it.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Takashi Iwai <tiwai@suse.de>
Cc: linux-cachefs@redhat.com
Cc: torvalds@osdl.org
Cc: akpm@linux-foundation.org
LKML-Reference: <20090810113305.17284.81508.stgit@warthog.procyon.org.uk>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
If any OSS support is enabled, regardless of built-in or module,
sound_core claims full OSS major number (that is, the old 0-255
region) to trap open attempts and request sound modules using custom
module aliases. This feature is redundant as chrdev already has such
mechanism. This preemptive claiming prevents alternative OSS
implementation.
The custom module aliases are scheduled to be removed and the previous
patch made soundcore emit the standard chrdev aliases too to help
transition.
This patch schedule the feature for removal in a year and makes it
optional so that developers and distros can try new things in the
meantime without rebuilding the kernel. The pre-claiming can be
turned off by using SOUND_OSS_CORE_PRECLAIM and/or kernel parameter
soundcore.preclaim_oss.
As this allows sound minors to be individually grabbed by other users,
this patch updates sound_insert_unit() such that if registering
individual device region fails, it tries the next available slot.
For details on removal plan, please read the entry added by this patch
in feature-removal-schedule.txt .
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Till now missing OSS devices emitted sound-slot/service-* module
alises instead of the standard char-major-* if a missing device number
is opened if soundcore is loaded. The custom module aliases don't
have any inherent benefit than backward compatibility.
sound-slot/service-* module aliases is scheduled to be removed and to
help the transition this patch makes soundcore emit the standard
module alises along with the custom ones.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
[un]register_chrdev() assume minor range 0-255. This patch adds __
prefixed versions which take @minorbase and @count explicitly.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Added REGULATOR, MMC and updated default CMDLINE so RX51 now boots.
Note that the regulator code should be moved from mmc-twl4030.c
to omap_hsmmc.c so it can be a module.
Signed-off-by: Roger Quadros <ext-roger.quadros@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
twl_mmc_cleanup() must free up the regulators that were
allocated by twl_mmc_late_init().
This eliminates the below error when 'omap_hsmmc' module is
repeatedly loaded and unloaded.
"sysfs: cannot create duplicate filename '/devices/platform
/mmci-omap-hs.0/microamps_requested_vmmc'"
Signed-off-by: Roger Quadros <ext-roger.quadros@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Add OTG transceiver to RX51 platform data to prevent kernel NULL pointer
dereference during MUSB initialisation.
Signed-off-by: Roger Quadros <ext-roger.quadros@nokia.com>
Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Fixes a wrong setting of resource parameter list in
SMSC911x platform driver data structure for Overo case.
This fixes folowing warning when compiling for Overo board:
warning: initialization from incompatible pointer type
Introduced since commit id:
commit 172ef27544
Author: Steve Sakoman <sakoman@gmail.com>
Date: Mon Feb 2 06:27:49 2009 +0000
ARM: Add SMSC911X support to Overo platform (V2)
Signed-off-by: Sergio Aguirre <saaguirre@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
commit e85c205ac1 increase vmalloc size.
vmalloc space will overlap with OMAP3 sram virtual address.
Signed-off-by: Li Hong Mei <hong-mei.li@motorola.com>
Signed-off-by: Janboe Ye <yuan-bo.ye@motorola.com>
Reviewed-by: Paul Walmsley <paul@pwsan.com>
This errata is valid for:
OMAP2420 Errata 1.85 Impacts all 2420 ES rev
OMAP2430 Errata 1.10 Impacts only ES1.0
Description: DMA may hang when several channels are used in parallel
OMAP3430: Not impacted, so remove the errata fix for omap3
Fixed issue reported on cpu_is_omap24xx check reported by Nishant Kamat
Signed-off-by: Vikram Pandita <vikram.pandita@ti.com>
Reviewed-by: Nishant Kamat <nskamat@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
There's no need to keep these defines limited in the ifdef block
for mach-omap2. It will just cause problems testing for the CPU
revision in the common code, like the next patch does for the DMA
errata.
Signed-off-by: Tony Lindgren <tony@atomide.com>
In the 2.1.6 kernel, the output loop in midi_poll() was changed to
enable interrupts during the outputc() call. Unfortunately, the check
whether the device has accepted the current byte ("ok") was moved behind
the code that removes the byte from the output queue, so one byte would
be lost every time the hardware FIFO is full.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Allow the interval timer to be programmed with its full 96 kHz
precision.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Using more packets in one URB do avoid interrupts does not make sense
when we have a sync pipe whose packets generate interrupts more often.
Therefore, limit the URB size to the synchronization packet interval.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The problem is minor, but without ->cred_guard_mutex held we can race
with exec() and get the new ->mm but check old creds.
Now we do not need to re-check task->mm after ptrace_may_access(), it
can't be changed to the new mm under us.
Strictly speaking, this also fixes another very minor problem. Unless
security check fails or the task exits mm_for_maps() should never
return NULL, the caller should get either old or new ->mm.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: James Morris <jmorris@namei.org>
mm_for_maps() takes ->mmap_sem after security checks, this looks
strange and obfuscates the locking rules. Move this lock to its
single caller, m_start().
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: James Morris <jmorris@namei.org>
It would be nice to kill __ptrace_may_access(). It requires task_lock(),
but this lock is only needed to read mm->flags in the middle.
Convert mm_for_maps() to use ptrace_may_access(), this also simplifies
the code a little bit.
Also, we do not need to take ->mmap_sem in advance. In fact I think
mm_for_maps() should not play with ->mmap_sem at all, the caller should
take this lock.
With or without this patch, without ->cred_guard_mutex held we can race
with exec() and get the new ->mm but check old creds.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: James Morris <jmorris@namei.org>
Without the initialization of vmaster NID, the dB information got
confused for ALC269 codec.
Reference: Novell bnc#527361
https://bugzilla.novell.com/show_bug.cgi?id=527361
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Cc: <stable@kernel.org>
Raw tracepoint data contains various kernel internals and
data from other users, so restrict this to CAP_SYS_ADMIN.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1249896452.17467.75.camel@twins>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
PERF_SAMPLE_* output switches should unconditionally output the
correct format, as they are the only way to unambiguously parse
the PERF_EVENT_SAMPLE data.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1249896447.17467.74.camel@twins>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
futex_requeue() can acquire the lock on behalf of a waiter
early on or during the requeue loop if it is uncontended or in
the event of a lock steal or owner died. On wakeup, the waiter
(in futex_wait_requeue_pi()) cleans up the pi_state owner using
the lock_ptr to protect against concurrent access to the
pi_state. The pi_state is hung off futex_q's on the requeue
target futex hash bucket so the lock_ptr needs to be updated
accordingly.
The problem manifested by triggering the WARN_ON in
lookup_pi_state() about the pid != pi_state->owner->pid. With
this patch, the pi_state is properly guarded against concurrent
access via the requeue target hb lock.
The astute reviewer may notice that there is a window of time
between when futex_requeue() unlocks the hb locks and when
futex_wait_requeue_pi() will acquire hb2->lock. During this
time the pi_state and uval are not in sync with the underlying
rtmutex owner (but the uval does indicate there are waiters, so
no atomic changes will occur in userspace). However, this is
not a problem. Should a contending thread enter
lookup_pi_state() and acquire hb2->lock before the ownership is
fixed up, it will find the pi_state hung off a waiter's
(possibly the pending owner's) futex_q and block on the
rtmutex. Once futex_wait_requeue_pi() fixes up the owner, it
will also move the pi_state from the old owner's
task->pi_state_list to its own.
v3: Fix plist lock name for application to mainline (rather
than -rt) Compile tested against tip/v2.6.31-rc5.
Signed-off-by: Darren Hart <dvhltc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Dinakar Guniguntala <dino@in.ibm.com>
Cc: John Stultz <johnstul@linux.vnet.ibm.com>
LKML-Reference: <4A7F4EFF.6090903@us.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
All we need to do for CONFIG_DMA_API_DEBUG support is call
dma_debug_init() in DMA code common for SPARC32 and SPARC64.
Now SPARC32 uses two dma_map_ops structures for pci and sbus so
there is not much dma stuff for SPARC32 in kernel/dma.c.
kernel/ioport.c also includes dma stuff for SPARC32. So let's
put all the dma stuff for SPARC32 in kernel/ioport.c and make
kernel/dma.c common for SPARC32 and SPARC64.
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Tested-by: Robert Reif <reif@earthlink.net>
Acked-by: David S. Miller <davem@davemloft.net>
Cc: tony.luck@intel.com
Cc: fenghua.yu@intel.com
LKML-Reference: <1249872797-1314-9-git-send-email-fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This converts SPARC to use asm-generic/pci-dma-compat instead
of the homegrown mechnism.
SPARC32 has two dma_map_ops structures for pci and sbus
(removing arch/sparc/kernel/dma.c, PCI and SBUS DMA accessor).
The global 'dma_ops' is set to sbus_dma_ops and get_dma_ops()
returns pci32_dma_ops for pci devices so we can use the
appropriate dma mapping operations.
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Tested-by: Robert Reif <reif@earthlink.net>
Acked-by: David S. Miller <davem@davemloft.net>
Cc: tony.luck@intel.com
Cc: fenghua.yu@intel.com
LKML-Reference: <1249872797-1314-8-git-send-email-fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This is a preparation for using asm-generic/pci-dma-compat.h;
SPARC32 has two dma_map_ops structures for pci and sbus
(removing arch/sparc/kernel/dma.c, PCI and SBUS DMA accessor).
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Tested-by: Robert Reif <reif@earthlink.net>
Acked-by: David S. Miller <davem@davemloft.net>
Cc: tony.luck@intel.com
Cc: fenghua.yu@intel.com
LKML-Reference: <1249872797-1314-7-git-send-email-fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Now sparc uses include/asm-generic/dma-mapping-common.h.
pci_sun4v.c doesn't need to have no-op
dma_4v_sync_single_for_cpu and dma_4v_sync_sg_for_cpu
(dma-mapping-common.h does nothing if sync_{single|sg}_for_cpu
hook is not defined). So we can remove them safely.
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Tested-by: Robert Reif <reif@earthlink.net>
Acked-by: David S. Miller <davem@davemloft.net>
Cc: tony.luck@intel.com
Cc: fenghua.yu@intel.com
LKML-Reference: <1249872797-1314-6-git-send-email-fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
flush_write_buffers() in dma-mapping-common.h was removed so we
can remove NULL flush_write_buffers() in IA64.
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: tony.luck@intel.com
Cc: fenghua.yu@intel.com
Cc: davem@davemloft.net
LKML-Reference: <1249872797-1314-3-git-send-email-fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This moves flush_write_buffers() in
asm-generic/dma-mapping-common.h to
arch/x86/kernel/pci-nommu.c.
The purpose of this patch is that, we can avoid defining NULL
flush_write_buffers() on IA64 and SPARC.
dma-mapping-common.h is used by X86 and IA64 (and SPARC soon)
but only X86 with CONFIG_X86_OOSTORE or CONFIG_X86_PPRO_FENCE
actually uses flush_write_buffers(). CONFIG_X86_OOSTORE or
CONFIG_X86_PPRO_FENCE is usable with only kernel/pci-nommu.c
(that is, not usable with other X86 IOMMU implementations such
as SWIOTLB, VT-d, etc) so we can safely move
flush_write_buffers() in asm-generic/dma-mapping-common.h to
arch/x86/kernel/pci-nommu.c.
The further discussion is:
http://lkml.org/lkml/2009/6/28/104
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: davem@davemloft.net
Cc: tony.luck@intel.com
Cc: fenghua.yu@intel.com
LKML-Reference: <1249872797-1314-2-git-send-email-fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
On an iMac G5, the b43 driver is failing to initialise because trying to
set the dma mask to 30-bit fails. Even though there's only 512MiB of RAM
in the machine anyway:
https://bugzilla.redhat.com/show_bug.cgi?id=514787
We should probably let it succeed if the available RAM in the system
doesn't exceed the requested limit.
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
The previous auto-mic patch for STAC/IDT codecs causes the Oops on
machines without digital mic pins. This patch fixes the problem.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
If the length is less or equal to frag_prefix_size in the first iteration
we write skb_frags_rx[-1] and read from priv->frag_info[-1]
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
